Provided by: davfs2_1.4.6-1ubuntu3_i386 bug


       davfs2.conf - Configuration file for mount.davfs


       There  is  a system wide configuration file /etc/davfs2/davfs2.conf and
       user configuration files  ~/.davfs2/davfs2.conf.  When  mount.davfs  is
       invoked  by root, only the system wide configuration file is read. When
       invoked by an ordinary user, the user configuration  file  is  read  in
       addition.   Settings   from  the  user  configuration  file  will  take
       precedence over the system wide configuration.

       The configuration file consists of lines where  each  line  contains  a
       keyword  value  pair.  Keyword and value are seperated by spaces and/or

       The file may contain sections that are for  one  specific  mount  point
       only.   Such  a section starts with a line, that contains the full path
       of the mount point enclosed in square brackets. The section ends at the
       start  of the next section or the end of file. Options that shall apply
       to all mounted file system must come before the first sections. Options
       given in a mount specific section will have precedence.


       kernel_fs coda
       use_locks 0
       use_locks 1
       gui_optimize 1

       All  mounted  davfs2  file systems will use the coda kernel file system
       and the proxy All davfs2 file systems expect  /media/dav  will
       disable  the  use  of  the  locks.  /home/otto/mywebspace  will use the
       gui_optimize option.


       Lines that only contain spaces and tabs (empty lines) are ignored.

       # indicates a comment. The rest of the line is ignored.

       \ is the escape character.

       "" is used for quotation.

       If a value contains one of the special characters space, tab, #, \,  or
       ", this character must be escaped by a preceding \. Use '\ ' instead of
       ' ', '\#' instead of '#', '\\' instead of '\' and '\"' instead of '"'.

       Values containing spaces, tabs or # may instead be enclosed  in  double
       quotes.   But " and ' must be escaped even within double quotes. If the
       starting line of a section is enclosed in  double  quotes,  the  square
       brakets must be within the quotes (like "[/home/otto/with space]").

       Boolean option values (yes/no) must be given as numerical value.  0 for
       no, 1 for yes.


General Options

              When invoked by root the mount.davfs daemon  will  run  as  this
              user.  Value must be given as name, not as numerical id.
              Default: davfs2
              Only allowed in the system wide configuration file.

              The group of the running mount.davfs daemon. Ordinary users must
              be member of this group in order to mount a davfs2 file  system.
              Value must be given as name, not as numerical id.
              Default: davfs2
              Only allowed in the system wide configuration file.

              An  ordinary  user  is  not  allowed  to  mount  within the home
              directory of another user.  But  sometimes  system  users  (like
              nobody)  get  assigned  home  directories (like /), that include
              common  mount  points.  This  option  allows  to  give  a  comma
              seperated  list  of system users that will be excluded from this
              Only allowed in the system wide configuration file.

              Which kernel file system to use, to integrate into  the  virtual
              file system.  Possible values are fuse and coda.
              Default: fuse

              Size in KiByte of the buffer used to communicate with the kernel
              file system.  Only usefull  with  fuse,  where  read  and  write
              operations may profit from a larger buffer.
              Default: 16

WebDAV Related Options

              Whether  to use a proxy to connect to the WebDAV server. 0 = no,
              1 = yes.  If no proxy is defined in the configration file or the
              environment  variables  https_proxy,  http_proxy  and all_proxy,
              this option has no effect.
              Default: 1
              Only allowed in the system wide configuration file.

       proxy  Name of the proxy. The name must be the fully  qualified  domain
              name  (no scheme). If the proxy port differs from the default of
              8080, it must be  appended,  seperated  by  a  colon.  Examples:
              Only allowed in the system wide configuration file.

              Name  of  a certificate file in PEM format. The name of the file
              may be given as absolute path or  as  file  name  only.  In  the
              latter     case     the    directories    ~/.davfs2/certs    and
              /etc/davfs2/certs will be searched.
              This option is intended  for  self-signed  server  certificates.
              Self-signed  means  issuer and subject are the same. Common name
              (CN) must be the domain name of the server.
              In case the server certificate is  not  self-singed,  this  file
              must  contain  the certificate of the certificate authority (CA)
              that  signed  the  server  certificate,  not  the   the   server
              certificate  itself.  If an hirarchy of CA's is involved (the CA
              that signed the server certificate is not the root CA), the file
              must  contain  all  the  certificates  from  the  chain  of  CAs
              involved,  beginning  with  the  CA  that  signed   the   server
              certificate,  up  to the self-signed certificate of the root CA.
              (The option name servertcert is a misnomer in this case. Sorry.)
              You can create the file by concatenating all the CA-certificates
              Note: Even if the certificate is trusted, that does not mean  it
              is  accepted.  There  is  the  additional  constraint,  that the
              certificate presented by the server must belong to  the  server.
              The  CN in the server certificate must be the domain name of the
              server. There  is  currently  no  way  to  automatically  accept
              certificates that don't belong to the server.

              Name  of  a  certificate  in PKCS#12 format that will be used to
              authenticate with the server. The name of the file may be  given
              as  absolute  path  or as file name only. In the latter case the
              directories             ~/.davfs2/certs/private              and
              /etc/davfs2/certs/private will be searched.

              Name  of  a  file that holds the credentials for servers and the
              proxy, and passwords to decrypt the client certificate. The name
              must  be an absolute path. The file must be read and writable by
              the owner only (mode 600).
              Default: ~/.davfs2/secrets
              Only allowed in the user configuration  file.  The  system  wide
              secrets file is allways /etc/davfs2/secrets.

              Ask  the user interactively for credentials and passwords if not
              found in the secretsfile. Ask the user if a servercert cannot be
              verified. 0 = no, 1 = yes.
              Default: 1

              Whether  to  lock  files  on the server when they are opened for
              writing.  0 = no, 1 = yes.
              Default: 1

              A string send to the server to identify the owner of a lock.  If
              a  WebDAV resource is used at the same time by different clients
              using the same  credentials,  different  values  for  lock_owner
              should be choosen.
              Default: the username from the credentials

              How  long  in  seconds  locks should be valid, before the server
              removes them.  The server  may  ignore  this  and  set  its  own
              timeout value.
              Default: 1800

              That  many  seconds  before the lock times out, mount.davfs will
              try to refresh the  lock.  The  value  should  be  substantially
              greater than delay_upload.
              Default: 60

              To  avoid   uploading  big  files  that  will  be refused by the
              server, mount.davfs uses the header expect: 100-continue to  get
              the  o.k.   from  the  server  before uploading. Not all servers
              understand this.  0 = no, 1 = yes.
              Default: 0

              Some servers do not handle  If-Match  and  If-None-Match-headers
              correctly.   This otion tells mount.davfs to use HEAD instead of
              thes headers.  0 = no, 1 = yes.
              Default: 0

              Popular servers send a weak etag whenever they are not  able  to
              calculate  a strong one. This weak etag will never be valid, but
              after one second it is silently  turned  into  a  strong,  valid
              etag.  With  this flag set to 1, mount.davfs will never use this
              weak etags. If the flag is 0, the  weakness  indicator  will  be
              removed  and  the  etag  is  assumed to be strong. There is some
              danger of the Lost-Update-Problem with this. But it is minimized
              when using locks.
              You  should  turn this on, when you can't use locks and there is
              the danger of concurrent access to the same  resource.  In  this
              case  the  etag  is  not  used at all and the resource cannot be
              0 = no, 1 = yes.
              Default: 0

              Some servers will only work when  they  are  allowed  to  set  a
              cookie  and this cookie is returned in subsequent requests. This
              option adds very simple cookie support.  It  supports  just  one
              cookie which should usually be a session ID.  0 = no, 1 = yes.
              Default: 0

              If  option  if_match_bug  is set: use HEAD-requests to check for
              existence  or  modification  of  a  file  to  avoid   unintended
              overwriting  what somebody else changed. Has no effect if option
              if_match_bug is 0. You should only set it  0,  if  there  is  no
              concurrent access to the server.  0 = no, 1 = yes.
              Default: 1

              Some  servers send wrong information about their capabilities in
              the DAV-header.  In this case the header should be ignored.
              Default: 0

              When extracting file names from the path component of  the  URL,
              mount.davfs  will  assume  they are encoded using this character
              set and translate file names to the local character set. This is
              not  about encoding of file contents and not about HTTP escaping
              There is no means in HTTP to know the character encoding of  the
              path component. There may be even different encodings within the
              same path, as the encoding of file names is often defined by the
              clients  that  created  them.   Nowadays  it is best to use only
              UTF-8 encoding and to do no conversion. If you are not sure that
              all  clients  understand  UTF-8,  restrict  file  names  to pure
              us-ascii. Never use characters in file names, that  may  have  a
              special function on some operating systems (like /, : and \).
              Default: no character set conversion

              When  creating  a  TCP connection to the server mount.davfs will
              wait that many seconds for an answer before assuming  an  error.
              If  a  value of '0' is used then no explicit timeout handling is
              set and the connect call will only timeout as  dictated  by  the
              TCP stack.
              This  parameter  only takes effect if the version of neon in use
              (neon version > 0.26) and the OS support non-blocking I/O.
              Default: 10

              How long in seconds mount.davfs will wait for an answer from the
              server before assuming an error.
              Default: 30

       retry  When  mount.davfs  can  not  reach  the server it will try again
              after retry seconds. For subsequent retries the interval will be
              increased up to max_retry seconds.
              Default: 30

              Maximum value of the retry interval.
              Default: 300

              When uploading a changed file fails temporarily mount.davfs will
              retry with increasing intervals, but not more often than this.
              With a bad connection this will  cause  additional  traffic.  To
              reduce   traffic   caused   by   unsuccessful   attempts  option
              use_expect100 can be set. But please test it. Most  proxies  and
              some servers don't support this header.
              Default: 15

              Your  server  might  expect special headers to do what you want.
              Different from other options, this one  takes  two  values:  the
              name of the header and its value.  Some ASP-backends to IIS seem
              to require the Microsoft specific header "Translate: F". You can
              add it like this:
              add_header Translate F
              mount.davfs will add header "Translate: F" on all requests.
              This   option  is  cumulative.  You  can  enter  more  than  one
              add_header option and all of them will be added. Also add_header
              options  from  /etc/davfs2/davfs2.conf and ~/.davfs2/davfs2.conf
              are merged.

Cache Related Options

              Each mounted davfs2 file system has a directory to store backups
              of  files that could not be stored back to the server. This sets
              the name of this directory.  You  should  regularly  check  this
              Default: lost+found

              The  directory  where  mount.davfs  will store cached files. For
              every mount point a subdirectory will be created.
              In the systemwide configuration file this will  set  the  system
              wide  cache, used by root. In a users configuration file it will
              set the cache used by this user.
              Defaults: /var/cache/davfs2 and ~/.davfs2/cache

              The amount of disk space in MiByte that may be used. mount.davfs
              will always take enough space to cache open files, ignoring this
              value if necessary.
              Default: 50

              mount.davfs maintains a hash table with an entry for each  known
              file  or  directory.  This  gives  the number of entries in this
              table. For large file systems (more than some hundreds of files)
              increasing  this  number may speed up file operations. The value
              should be a power of 2.
              Default: 1024

              After mount.davfs has got information about files in a directory
              it  considers it valid for this time in seconds. Note: This does
              not affect opening of  files  and  reading  a  directory  by  an
              Default: 60

              When   a   file  or  directory  is  opened  by  an  application,
              mount.davfs will first check the server for a newer version. But
              some  applications  do  open  calls  on  the  same file in short
              sequence. To avoid unecessary traffic mount.davfs will wait that
              many  seconds  before  it  send  a  new  request  for  the  same
              Default: 1

              When a file that has been changed is  closed,  mount.davfs  will
              wait  that  many seconds before it will upload it to the server.
              This will avoid  uploading  of  temporary  files  that  will  be
              removed  immediately  after  closing.   If you need the files to
              appear on the server immediately after closing, set this  option
              to 0.
              Default: 10

              When a file is opened, mount.davfs will have to check the server
              whether there is a newer version. Graphical User Interfaces tend
              to  open  just  any  file,  slowing down things dramatically for
              large directories.  With this option mount.davfs will try to get
              this information from all files in a directory with one PROPFIND
              request. 0 = no, 1 = yes.
              Default: 0

Debugging Options

       debug  Send debug messages to the syslog daemon. The value  tells  what
              kind  of information shall be logged. The messages are send with
              facility LOG_DAEMON and priority LOG_DEBUG. It depends from  the
              configuration  of  the  syslog daemon where the messages will go
              (propably      /var/log/messages,       /var/log/syslog       or
              /var/log/daemon.log).  Whether  HTTP  related debug messages are
              available depends on your neon library.
              Unlike other options, this option is cumulative.  If  there  are
              several debug entries with different values, all of them will be
              applied. Also debug  options  from  /etc/davfs2/davfs2.conf  and
              ~/.davfs2/davfs2.conf are merged.
              Note:  Debug  messages let the log-files grow quickly. Never use
              this option in normal operation of mount.davfs.
              Default: no debugging messages

              Recognized values:

              config Command line and configuration options.

              kernel Upcalls from the kernel file system.

              cache  Cache operations like adding and removing nodes.

              http   HTTP headers.

              xml    Parsing of the XML-body of WebDAV-requests.

                     Negotiation of authentication.

              locks  Information about locks.

              ssl    TLS/SSL related stuff like certificates.

                     Complete body of HTTP-responses.

                     Also print confidential  information,  which  is  usually
                     omitted or obscured.

              most   Includes config, kernel, cache and http.


       This     man    page    was    written    by    by    Werner    Baumann



       mount.davfs(8), umount.davfs(8), mount(8), umount(8), fstab(5)