Provided by: jazip_0.34-15_i386
jazip.conf - jazip(1) configuration file.
The /etc/jazip.conf file lists the Jaz and Zip devices that users are
allowed to mount and unmount using jazip, along with the mount points
used by jazip for each device.
If you have more than one drive on your system, you can create a
separate entry in the configuration file for each one, and then specify
the raw device name of the drive you want to use on the command line
when you invoke jazip. If no device name is given on the command line,
jazip will use the settings in the first entry of /etc/jazip.conf by
The format of the jazip.conf file should be mostly self-explanatory.
Each line looks like:
/dev/sda /zip auto auto 0 0
The first entry is the raw SCSI device name of your drive (e.g.
/dev/sda without a partition number ). The second entry is the mount
point you wish to use (e.g. /zip ). The additional entries:
auto auto 0 0
are required but are not user-changeable. They are required because
jazip uses standard system call to do mounting and they expect this
The type of filesystem (e.g. vfat or ext2 ) will be automatically
detected by jazip and is not listed in /etc/jazip.conf.
See the jazipconfig(8) man page for specifics on the jazipconfig
command that you can use to create /etc/jazip.
jazip Copyright (c) 1996 Jarrod A. Smith
This manual page by Peter S Galbraith <firstname.lastname@example.org> for the Debian
GNU/Linux system (but may be used by others).