Provided by: portslave_2010.04.19_i386
pslave.conf - configuration file for portslave(8)
A line that starts with '#' is a comment. Any other line is a
configuration statement. Configuration statements may be extended to
cover multiple lines with a '\' character at the end of a line.
In previous versions of Portslave there are two main types of
configuration directives, global directives that start with 'conf.'
and line directives starting with 'all.' or 'sXX.' The configuration
directives were divided (somewhat arbitarily) into global directives
that apply to all lines and line directives that may have different
values for each line. This distinction makes no sense to me, so I have
removed it. Now all directives can have different values for each
line! This gives this version of Portslave many new configuration
options that were previously absent.
If a line starts with 'conf.' or 'all.' then it's value is a default
value for all lines. If a line starts with 'sXX.' then it's value
applies to the specified line (where 'XX' specifies the number of the
'NAS port' - a non-negative number). This number is the command-line
parameter used on the portslave command line.
Configuration directives are all comprised of a name followed by a
value. The value may be of type int, dynamic int, bool, string, enum,
hostname, hostname service, IP number, IP number service, dynamic IP
number, and chat-script.
int A simple number.
Number which may end in a '+' character to specify that the it
is to have the port number added to it.
bool A boolean value, 0/no/false or 1/yes/true.
string A string may comprise multiple lines, non-terminal lines must
end with a '\' character. Strings do not need quotes around
them (double quotes around strings are accepted but ignored,
useful if you want leading or trailing white-space I guess).
The null string representation is "". All the usual string
escape sequences are supported, \n for a new line, \r for
carriage return, ^D or ^d means the controll-D sequence
(character ASCII 4 EOT).
enum One of several string values that are internally translated to a
Hostnames are resolved to IP addresses immediately upon startup!
You must have your name server running before Portslave is
hostname and IP service (either a number or a name to be
resolved from /etc/services). The IP service is optional, if it
is specified then the IP address must be enclosed in "[" and
Simple dotted-quad IP address.
dynamic IP number
Dotted-quad IP address which may end in a '+' character to
specify that the IP address is to have the port number added to
Lines may be expanded in the following fashion:
This means the same as the following:
s32.tty tts/C0 s33.tty tts/C1 ... s63.tty tts/C31
bool - whether to write users' passwords to syslog (default no).
A chat script is at it's simplest a series of expect send pairs.
The system will expect a string and then send another string in
response if/when it receives the expect string. An
expect-string may be of the form A-B-C in which case if the
sub-string A is not found due to timeout then the sub-string B
will be sent and then the sub-string C will be expected. NB
There must be exactly three parts to an expect-string that has
sub-strings and they are to be delimited by "-" characters.
Also note that to wait for a "-" you must escape it as "\-".
The send string may have the following special escape sequences.
"\d" for a one second delay, "\p" for a 100ms pause, "\l" to
lower DTR for one second, "\c" to specify that the string is not
to end with a "\r" character, and "\K" to send a break
Also special strings may be inserted before the expect strings
in any part of the chat script. The special strings are as
TIMEOUT XX to specify that the new timeout when waiting for an
expect string is to be XX seconds.
WAIT DCD to wait for the DCD line of the modem to be asserted.
STATUS USER-NAME HOST-NAME writes an entry to the /var/run/utmp
file with the user name field set to the first parameter
(portslave uses "Incoming" and "Connected" as the default values
for the first two phases of connecting). It also uses
"%p:I.HANDSHAKE" as the default for the hostname. See
ctlportslave for the use of this.
ABORT XX to abort the connection if the string XX (which may
contain multiple words surrounded by quotes) is received.
SETVAR Z=XX to set the variable specified by the character Z to
the text following the string XX (quote the entire Z=XX part if
the string XX contains a space). The variable Z may be 'C' for
the connect string, 'S' for the source of the call (from caller
line identification), or 'D' for the number dialled (from CLI).
Here is an example to recognise the connect strings from common
configurations of Hayes compatible modems:
SETVAR "C=CARRIER " SETVAR C+PROTOCOL: SETVAR C?CONNECT
The first line does an unconditional assignment when the string
"CARRIER " is found, the second appends data to the variable
when the string "PROTOCOL" is found, and the third will do an
assignment when the string "CONNECT" is found if the variable is
Note that in the variable assignment white-space preceeding the
value is removed.
String - Hostname of the current system. Defaults to the
hostname returned by gethostname().
IP number - address for local end of SLIP and PPP connections,
defaults to a DNS lookup of the value from hostname.
String - Lock directory, defaults to /var/lock which is the
directory for FSSTD compliant systems. If set to an empty
string then it will turn off locking.
rlogin String - Where to find the rlogin binary that accepts the -i
flag for specifying the local user-name.
Defaults to the location where we install rlogin-radius.
telnet String - Where to find telnet. This can just be the system
Defaults to where telnet is detected on the local system.
ssh String - Where to find ssh. This can just be the system SSH.
Defaults to where ssh is detected on the local system.
pppd String - Where to find our patched pppd that supports the
Defaults to the location where we install pppd-radius.
bool - If you set this to true, you can login locally by putting
a '!' before your loginname. Useful for emergencies when the
RADIUS server is down. Setting this is a potential security
bool - Set to true if you want CHAP authentication. Turned off
by default at the moment because the chap code in pppd doesn't
allow setting the IP address.
syslog hostname - The host to send remote syslog data to. Leave empty
for only local logging.
int - The local facility number. A number from 0 to 7 inclusive
means syslog facility local0 to local7.
string - Directory where your scripts that set up IP filtering
(typically using ipchains or iptables) are stored. To invoke
them, just add the RADIUS-attribute Framed-Filter-Id = "foo" to
your profile, where foo is the name of script. Then the script
will be run as: script <start:stop> <remote ip> <local ip>
bool - whether to remove a preceeding 'P', 'C', 'S', '!', or 'L'
or a trailing '.slip', '.cslip', or '.ppp' before storing the
user-name in the utmp.
tty string - this is the only line directive that can't be used as
an 'all.' or path or relative to /dev) that is used for the
device. If you want devices /dev/tts/0 and /dev/ttr/5 to be NAS
ports 1 and 2 respectively and have them use the default line
settings (from the 'all' values) then you can use the following
s1.tty tts/0 s2.tty ttr/5
debug int - 0 means no debug output, 1 means some, 2 means all. 2
means lots of data!
bool - if true then log to utmp like a regular getty/login. Do
not set this to false unless you really know what you are doing,
it breaks ctlportslave (amoung other things).
bool - if true then log to wtmp like a regular getty/login (NB
we will never log to wtmp if utmp logging is off).
string - format of the utmp/wtmp FROM field. See the expansion
directives section. The default value is "%p:%P.%3.%4", for
ctlportslave to work properly the start of the string must be
bool - emulate a modem. This is for when Portslave is directly
connected to a machine that thinks it is connected to a modem.
Portslave will emulate a Hayes compatible modem.
enum - 'async', 'sync', 'isdn', 'isdn-v120', or 'isdn-v110'. If
you don't understand this then you probably want 'async'.
enum - 'none', 'radius', 'tacacs', 'remote', 'local',
'radius/local', 'tacacs/local', 'local/radius', or
'local/tacacs' for which type of authentication to use. 'none'
means that we just use the supplied user-name for logging
purposes and don't talk to the RADIUS server on login.
string - file name for configuration file for radclient
bool - true means to accept RADIUS logins with a null password,
false means to reject them. Default true.
hostname - host names for the TACACS Authentication host if
Portslave is compiled with TACACS support.
enum - 'login', 'rlogin', 'telnet', 'ssh1', 'ssh', 'slip',
'cslip', 'ppp', 'ppp_only', 'tcpclear', 'tcplogin', 'console',
'socket_client', 'socket_server', or 'socket_ssh'.
Login is to exec /bin/login. Rlogin, telnet, and ssh are for
executing those programs to login to other machines. Slip,
cslip, and PPP are for running those IP connectivity protocols,
ppp_only is for leased line configuration. Tcplogin and console
are apparently not implemented, with tcpclear I have not been
able to work out what it does. Contributions welcome! Default
host hostname - default host for rlogin/telnet/ssh sessions.
dynamic IP number - used as the client IP address if the RADIUS
server doesn't send an IP address, or when it tells us to use a
IP number - in almost all cases it should be 255.255.255.255,
leave it at that unless you really know what you are doing.
mtu int - MTU for connection, 1500 is a good value as that's what
Ethernet uses and most packets get routed over Ethernet in some
way so 1500 avoids fragmentation and reduces the number of
packets needed to transfer data.
mru int - MRU for connection, generally should be the same as the
string - PPP command-line options to be used when we autodetect
a PPP session. Note that the expansion directives apply.
pppopt string - PPP command-line options to be used when we have
already authenticated the user and the service type is known to
be PPP. Same format as autoppp.
issue string - message that is issued on connect. Expansion
directives are applied.
prompt string - login prompt, default is "%h login: ". Expansion
directives are applied.
term string - terminal type for rlogin/telnet/ssh sessions. Defaults
speed int - port speed in bps.
dynamic int - port number used for telnet targets.
parity enum - 'none', 'odd', or 'even'.
int - number of stop bits.
int - size of a character 5, 6, 7, or 8 bits.
dcd bool - use the DCD line or not (this sets CLOCAL if off). This
means that the session will get hung up if the modem hangs up.
flow enum - 'none', 'hard', or 'soft'. Hardware (RTS/CTS), software
(XON/XOFF AKA ^S/^Q), or no flow control.
chat-script - the chat script for initialising the modem and
answering. Needs much more documentation on this.
string - configuration file for radclient (default
string - the times that are allowed for logins.
bool - if true then the maximum length of the call will be
determined by the value of the login_time setting.
These directives can be used for the format of the utmp/wtmp field, for
the autoppp, pppopt, issue, prompt fields, and others.
%l login name
%L stripped login name
%p NAS port number
%b port speed
%H host for telnet/ssh connections
%i local IP
%j remote IP
%1 first byte (MSB) of remote IP
%2 second byte of remote IP
%3 third byte of remote IP
%4 fourth byte (LSB) of remote IP
%M multilink if the RADIUS server has PW_NAS_PORT_LIMIT set to > 1,
otherwise empty string
%I idle timeout
%T session timeout
%d dcd setting, expands to "modem" if DCD line is to be used or to
"local" if it isn't. Put this on the ppp command line to give
it the right setting to match the value of the "dcd" attribute.
The documentation section for protocol in the line directives section
needs to be improved. I intend to do so as soon as I work out what the
The initchat option needs heaps more documentation. As soon as I
figure it out...
The realm section needs to be improved, to do this I have to go through
the code and comment what it does so I can understand it.
This man page was written by Russell Coker <email@example.com>. May
be freely used and distributed without restriction.
portslave(8), pppd(8), cltportslave(1)
Russell Coker <firstname.lastname@example.org>010.03.30 pslave.conf(5)