Provided by: libsane_1.0.22-2ubuntu2_i386
sane-xerox_mfp - SANE backend for Xerox Phaser 3200MFP device
The sane-xerox_mfp library implements a SANE (Scanner Access Now Easy)
backend that provides access to the following USB and network
Dell MFP Laser Printer 1815dn
Xerox Phaser 6110MFP
Samsung CLX-3170fn & CLX-3175FW
Xerox WorkCentre 3119 Series
If you own a scanner other than the ones listed above that works with
this backend, please let us know this by sending the scanner's exact
model name and the USB vendor and device ids (e.g. from
/proc/bus/usb/devices, sane-find-scanner or syslog) to us. Even if the
scanner's name is only slightly different from the models mentioned
above, please let us know.
/etc/sane.d/xerox_mfp.conf USB scanners do not need any configuration.
For SCX-4500W in network mode you need to specify
tcp host_address [port]
The host_address is passed through resolver, thus can be a dotted quad
or a name from /etc/hosts or resolvable through DNS.
The backend configuration file. By default all scanner
types/models are enabled, you may want to comment out unwanted.
The static library implementing this backend.
The shared library implementing this backend (present on systems
that support dynamic loading).
SANE_DEBUG_XEROX_MFP If the library was compiled with debug support
enabled, this environment variable controls the debug level for this
backend. Higher debug levels increase the verbosity of the output.
Example: export SANE_DEBUG_XEROX_MFP=4
Alex Belkin <firstname.lastname@example.org>
Samsung SCX-4500W scan over network support Alexander Kuznetsov
Multicast autoconfiguration for LAN scanners is not implemented yet.
IPv6 addressing never been tested.
15 Dec 2008 sane-xerox_mfp(5)