Provided by: xscreensaver-data-extra_5.14-1ubuntu1_i386 bug

NAME

       sonar - display a sonar scope

SYNOPSIS

       sonar  [-ping  hosts-or-subnets]  [-ping-timeout  int]  [-delay  usecs]
       [-speed ratio] [-sweep-size ratio]  [-font-size  points]  [-team-a-name
       string]  [-team-b-name  string] [-team-a-count int] [-team-b-count int]
       [-no-dns] [-no-times] [-no-wobble] [-debug] [-fps]

DESCRIPTION

       This draws a sonar screen that pings (get it?) the hosts on your  local
       network,  and plots their distance (response time) from you.  The three
       rings  represent  ping  times  of  approximately  2.5,  70  and   2,000
       milliseconds respectively.

       Alternately, it can run a simulation that doesn't involve hosts.

OPTIONS

       sonar understands the following options:

       -ping hosts-or-subnets
               The  list  of  things  to  ping, separated by commas or spaces.
               Elements of this list may be:

               simulation  Run in simulation  mode  instead  of  pinging  real
                           hosts.

               hostname    Ping the given host.

               A.B.C.D     Ping the given IP address.

               subnet      Ping  the  local  class  C  subnet (the nearest 255
                           addresses).

               subnet/NN   Ping  a   different-sized   local   subnet:   e.g.,
                           subnet/28 would ping a 4-bit subnet (the nearest 15
                           addresses).

               A.B.C.D/NN  Ping an arbitrary other  subnet.   The  IP  address
                           specifies  the base address, and the part after the
                           slash is how wide the subnet  is.   Typical  values
                           are  /24  (for  255  addresses)  and  /28  (for  15
                           addresses).

               filename    Ping the hosts listed in the given file.  This file
                           can  be in the format used by /etc/hosts, or it can
                           be any file that has host names  as  the  first  or
                           second  element  on each line.  If you use ssh, try
                           this:

                             sonar -ping $HOME/.ssh/known_hosts

       -ping-timeout int
               The amount of time in milliseconds the program will wait for an
               answer to a ping.

       -delay int
               Delay between frames, in microseconds.  Default 20000.

       -speed ratio
               Less than 1 for slower, greater than 1 for faster.  Default 1.

       -sweep-size ratio
               How big the glowing sweep area should be. Default 0.3.

       -font-size points
               How large the text should be.  Default 10 points.

       -no-wobble
               Keep  the  display  stationary  instead of very slowly wobbling
               back and forth.

       -no-dns Do not attempt to resolve IP addresses to hostnames.

       -no-times
               Do not display ping times beneath the host names.

       -team-a-name string
               In simulation mode, the name of team A.

       -team-b-name string
               In simulation mode, the name of team B.

       -team-a-count int
               In simulation mode, the number of bogies on team A.

       -team-b-count int
               In simulation mode, the number of bogies on team B.

       -fps    Display the current frame rate, polygon count, and CPU load.

NOTES

       On most Unix systems, this program must be installed as setuid root  in
       order  to  ping  hosts.   This is because root privileges are needed to
       create an ICMP RAW socket.   Privileges  are  disavowed  shortly  after
       startup  (just after connecting to the X server) so this is believed to
       be safe:
       chown root:root sonar
       chmod u+s sonar
       It is not necessary to make it setuid  on  MacOS  systems,  because  on
       MacOS,  unprivileged  programs  can  ping  by  using ICMP DGRAM sockets
       instead of ICMP RAW.

       In ping-mode, the display is a logarithmic scale,  calibrated  so  that
       the three rings represent ping times of approximately 2.5, 70 and 2,000
       milliseconds respectively.

       This means that if any the hosts you are pinging  take  longer  than  2
       seconds  to respond, they won't show up; and if you are pinging several
       hosts with very fast response times, they will all appear close to  the
       center of the screen (making their names hard to read.)

SEE ALSO

       X(1), xscreensaver(1), ping(8)

COPYRIGHT

       Copyright (C) 2000-2008 by Jamie Zawinski <jwz@jwz.org>
       Copyright (C) 1998 by Stephen Martin. <smartin@canada.com>

       Permission to use, copy, modify, distribute, and sell this software and
       its documentation for  any  purpose  is  hereby  granted  without  fee,
       provided  that the above copyright notice appear in all copies and that
       both that  copyright  notice  and  this  permission  notice  appear  in
       supporting  documentation.   No  representations  are  made  about  the
       suitability of this software for any purpose.  It is provided  "as  is"
       without express or implied warranty.

AUTHORS

       Stephen Martin <smartin@canada.com>, 3-nov-1998.

       Subnet support, etc. added by Jamie Zawinski, 17-Jul-2000.

       Rewritten using OpenGL instead of X11 by Jamie Zawinski, 12-Aug-2008.