Provided by: oss4-base_4.2-build2004-1ubuntu2_i386 bug

NAME

       oss_hdaudio - Intel High Definition Audio (AZALIA)

DESCRIPTION

       Open  Sound  System  driver  for  Intels high definition audio known as
       "Azalia". This driver supports Intel 915/925 chipsets with the  Realtek
       ALC880 and CMedia 9880 8 channel codecs.

       The HDA driver supports:

       o  8-96Khz Playback/Recording

       o  8 or 16 or 32 bits

       o  2, 4, 6 or 8 channel audio.

       o  SPDIF digital output and Input

       o  AC3 passthrough

   HDAUDIO MIXER
       The Intel HDA mixer is a new type of mixer that doesn't have the normal
       volume controls found on AC97 or legacy  SB  devices.   The  HDA  mixer
       presents a concept of Jacks and you can configure any jack to be either
       an output or an input jack.

       Some motherboards may not correctly initialize the jacks  according  to
       their  color  and functionality but in general here's the configuration
       that should generally be followed:

              o Orange = Center/LFE
                     o Blue = Line-in

              o Black = Rear
                     o Green = Front

              o Grey = Side
                     o Pink = Mic

       Some Azalia codecs support front panel connectors and so if you see fp-
       green  and  fp-pink  connectors, then these are for front panel speaker
       and mic/line-in Jacks.

              There is a function selector for most of the analog audio  jacks
              (for  example  connector.pink.mode).  This  selector  is used to
              control if the jack is used as an input (microphone or line  in)
              or output (front, rear, side, speaker, etc).

KNOWN PROBLEMS

       In  general Azalia based systems (laptops/motherboards) would require a
       custom driver to work properly. Due to  enormous  number  of  different
       systems  it  is  not  possible  to  develop such custom drivers for all
       systems. A generic driver is used for systems that don't have dedicated
       drivers.

       Unfortunately the mixer and control panel interface (see ossmix(1)) for
       "generic" systems is very cryptic and difficult to understand. To solve
       problems  with  volumes  or signal routing you need to start ossxmix(1)
       and change the controls one at time until you get the desired effect.

OPTIONS

       o hdaudio_jacksense
              enables jack sensing mode when the hdaudio driver is loaded.  In
              this  mode all I/O pin's that are not in use will be disabled as
              well as the mixer controls that are related with them.  In  this
              way the mixer/control panel will become more intuitive.  However
              OSS will need to be restarted with soundoff; soundon every  time
              new inputs or outputs are attached to the audio jacks. Default :
              0.

              NOTE! hdaudio_jacksense=1 works  only  in  some  systems.   Many
              laptops and motherboards don't support jack sensing.

       o hdaudio_noskip
              Disable  skipping  unconnected  jack. All mixer controls will be
              shown, even for disabled I/O pins.  Can get values 0-7. 1-7 is a
              bitmask, where every bit masks a different check. Bit 3 (= value
              4) overrides jacksense check  too.   Default:  0  -  unconnected
              jacks are skipped.

FILES

       /etc/oss4/conf/oss_hdaudio.conf Device configuration file

AUTHOR

       4Front Technologies

                               27 September 2011                oss_hdaudio(7)