Provided by: am-utils_6.2+rc20110530-1ubuntu1_i386 bug

NAME

       amq - automounter query tool

SYNOPSIS

       amq  [ -fmpqsvwHTU ] [ -h hostname ] [ -l log_file ] [ -x log_options ]
       [ -D debug_options ] [ -P program_number ] [[ -u ] directory ...  ]

DESCRIPTION

       Amq provides a simple way of  determining  the  current  state  of  amd
       program.   Communication  is  by  RPC.   Three  modes  of operation are
       supported by the current protocol.  By default a list of  mount  points
       and  auto-mounted  filesystems  is  output.  An alternative host can be
       specified using the -h option.

       If directory names are given, as output by default, then per-filesystem
       information is displayed.

OPTIONS

       -f     Ask  the automounter to flush the internal caches and reload all
              the maps.

       -h hostname
              Specify an alternate host to query.  By default the  local  host
              is  used.   In  an  HP-UX cluster, the root server is queried by
              default, since that is the system on which  the  automounter  is
              normally run.

       -l log_file
              Tell  amd  to  use  log_file as the log file name.  For security
              reasons, this must be the same log  file  which  amd  used  when
              started.   This option is therefore only useful to refresh amd's
              open file handle on the log file, so that it can be rotated  and
              compressed via daily cron jobs.

       -m     Ask  the  automounter  to provide a list of mounted filesystems,
              including the number of references to each  filesystem  and  any
              error which occurred while mounting.

       -p     Return  the  process  ID  of  the remote or locally running amd.
              Useful when you need to send a signal to the local amd  process,
              and  would  rather not have to search through the process table.
              This option is used in the ctl-amd script.

       -q     Suppress error messages  produced  when  attempting  synchronous
              unmounts with the -u option.

       -s     Ask the automounter to provide system-wide mount statistics.

       -u     Ask   the  automounter  to  unmount  the  filesystems  named  in
              directory instead of providing information about them.  Unmounts
              are  requested,  not  forced.   They  merely  cause  the mounted
              filesystem to timeout, which will be picked  up  by  amd's  main
              scheduler  thus  causing  the normal timeout action to be taken.
              If the -u option is repeated, amq will attempt  to  unmount  the
              file system synchronously by waiting until the timeout action is
              taken and returning an error if the unmount  fails.   Any  error
              messages produced may be suppressed with the -q option.

       -v     Ask  the  automounter  for  its  version information.  This is a
              subset of the information output by amd's -v option.

       -w     Translate a full pathname as returned by getcwd(3) into a  short
              Amd  pathname  that goes through its mount points.   This option
              requires that Amd is running.

       -x log_options
              Ask the automounter to use  the  logging  options  specified  in
              log_options  from  now  on.   Note  that the "fatal" and "error"
              options cannot be turned off.

       -D debug_options
              Ask the automounter to use the debugging  options  specified  in
              debug_options from now on.

       -H     Display short usage message.

       -P program_number
              Contact an alternate running amd that had registered itself on a
              different RPC program_number and apply all other  operations  to
              that  instance  of the automounter.  This is useful when you run
              multiple copies of amd, and need to manage each one  separately.
              If  not  specified,  amq will use the default program number for
              amd, 300019.  For security reasons, the only  alternate  program
              numbers amd can use range from 300019 to 300029, inclusive.

       -T     Contact amd using the TCP transport only.  Normally amq will try
              TCP, and if that failed, will try UDP.

       -U     Contact amd using UDP (connectionless) transport only.  Normally
              amq will try TCP, and if that failed, will try UDP.

FILES

       amq.x               RPC protocol description.

CAVEATS

       Amq uses a Sun registered RPC program number (300019 decimal) which may
       not be in the /etc/rpc database.

       If the TCP wrappers  library  is  available,  and  the  use_tcpwrappers
       global amd.conf option is set to ``yes'', then amd will verify that the
       host running amq is authorized to connect.  The amd service  name  must
       used  in  the /etc/hosts.allow and /etc/hosts.deny files.  For example,
       to  allow  only  localhost  to  connect  to  amd,  add  this  line   to
       /etc/hosts.allow:

              amd: localhost

       and this line to /etc/hosts.deny:

              amd: ALL

SEE ALSO

       amd(8), amd.conf(5), hosts_access(5).

       ``am-utils'' info(1) entry.

       Linux   NFS   and   Automounter  Administration  by  Erez  Zadok,  ISBN
       0-7821-2739-8, (Sybex, 2001).

       http://www.am-utils.org

       Amd - The 4.4 BSD Automounter

AUTHORS

       Jan-Simon Pendry <jsp@doc.ic.ac.uk>, Department of Computing,  Imperial
       College, London, UK.

       Erez  Zadok  <ezk@cs.sunysb.edu>,  Computer  Science  Department, Stony
       Brook University, Stony Brook, New York, USA.

       Other authors and contributors to am-utils are listed  in  the  AUTHORS
       file distributed with am-utils.

                                 25 April 1989                          AMQ(8)