Provided by: logrotate_3.7.8-6ubuntu5_i386 bug

NAME

       logrotate - rotates, compresses, and mails system logs

SYNOPSIS

       logrotate [-dv] [-f|--force] [-s|--state file] config_file ..

DESCRIPTION

       logrotate  is  designed to ease administration of systems that generate
       large numbers of log files.  It allows automatic rotation, compression,
       removal, and mailing of log files.  Each log file may be handled daily,
       weekly, monthly, or when it grows too large.

       Normally, logrotate is run as a daily cron job.  It will not  modify  a
       log  more  than  once  in  one day unless the criterion for that log is
       based on the log's size and logrotate is being run more than once  each
       day, or unless the -f or -force option is used.

       Any  number  of  config  files  may be given on the command line. Later
       config files may override the options given in earlier  files,  so  the
       order  in  which  the  logrotate  config files are listed is important.
       Normally, a single config file which includes any  other  config  files
       which are needed should be used.  See below for more information on how
       to use the include directive to accomplish this.   If  a  directory  is
       given  on  the  command line, every file in that directory is used as a
       config file.

       If no command line arguments are given, logrotate  will  print  version
       and  copyright  information,  along with a short usage summary.  If any
       errors occur while rotating logs, logrotate  will  exit  with  non-zero
       status.

OPTIONS

       -d     Turns  on  debug mode and implies -v.  In debug mode, no changes
              will be made to the logs or to the logrotate state file.

       -f, --force
              Tells logrotate to force the rotation, even if it doesn't  think
              this  is  necessary.   Sometimes this is useful after adding new
              entries to a logrotate config file, or if  old  log  files  have
              been  removed  by  hand,  as  the new files will be created, and
              logging will continue correctly.

       -m, --mail <command>
              Tells logrotate which command to use  when  mailing  logs.  This
              command  should  accept  two  arguments:  1)  the subject of the
              message, and 2) the recipient. The  command  must  then  read  a
              message  on  standard  input  and  mail it to the recipient. The
              default mail command is /usr/bin/mail -s.

       -s, --state <statefile>
              Tells logrotate to use an alternate state file.  This is  useful
              if  logrotate  is being run as a different user for various sets
              of    log    files.     The    default     state     file     is
              /var/lib/logrotate/status.

       --usage
              Prints a short usage message.

       -v, --verbose
              Turns on verbose mode, ie. display messages during rotation.

CONFIGURATION FILE

       logrotate  reads  everything  about the log files it should be handling
       from the series of configuration files specified on the  command  line.
       Each  configuration  file  can  set  global  options (local definitions
       override global ones, and later definitions override earlier ones)  and
       specify  logfiles  to  rotate.  A  simple configuration file looks like
       this:

       # sample logrotate configuration file
       compress

       /var/log/messages {
           rotate 5
           weekly
           postrotate
               /usr/bin/killall -HUP syslogd
           endscript
       }

       "/var/log/httpd/access.log" /var/log/httpd/error.log {
           rotate 5
           mail www@my.org
           size 100k
           sharedscripts
           postrotate
               /usr/bin/killall -HUP httpd
           endscript
       }

       /var/log/news/* {
           monthly
           rotate 2
           olddir /var/log/news/old
           missingok
           postrotate
               kill -HUP `cat /var/run/inn.pid`
           endscript
           nocompress
       }

       The first few lines set  global  options;  in  the  example,  logs  are
       compressed  after  they  are  rotated.   Note  that comments may appear
       anywhere in the  config  file  as  long  as  the  first  non-whitespace
       character on the line is a #.

       The  next section of the config file defines how to handle the log file
       /var/log/messages. The log will go through five weekly rotations before
       being  removed. After the log file has been rotated (but before the old
       version of the log has been compressed), the command /sbin/killall -HUP
       syslogd will be executed.

       The     next     section    defines    the    parameters    for    both
       /var/log/httpd/access.log  and   /var/log/httpd/error.log.    Each   is
       rotated whenever it grows over 100k in size, and the old logs files are
       mailed (uncompressed) to www@my.org after going  through  5  rotations,
       rather  than being removed. The sharedscripts means that the postrotate
       script will only be run once (after the old logs have been compressed),
       not  once  for each log which is rotated.  Note that log file names may
       be enclosed in quotes  (and  that  quotes  are  required  if  the  name
       contains  spaces).   Normal shell quoting rules apply, with ', ", and \
       characters supported.

       The last section defines  the  parameters  for  all  of  the  files  in
       /var/log/news.  Each  file  is  rotated  on  a  monthly basis.  This is
       considered a single rotation directive and if  errors  occur  for  more
       than one file, the log files are not compressed.

       Please  use  wildcards  with caution.  If you specify *, logrotate will
       rotate all files, including previously rotated ones.  A way around this
       is  to  use  the  olddir  directive  or  a more exact wildcard (such as
       *.log).

       If  the  directory  /var/log/news  does  not  exist,  this  will  cause
       logrotate  to  report  an  error. This error cannot be stopped with the
       missingok directive.

       Here is more information on the directives which may be included  in  a
       logrotate configuration file:

       compress
              Old  versions  of  log  files  are  compressed  with  gzip(1) by
              default. See also nocompress.

       compresscmd
              Specifies which command to  use  to  compress  log  files.   The
              default is gzip(1).  See also compress.

       uncompresscmd
              Specifies  which  command  to  use to uncompress log files.  The
              default is gunzip(1).

       compressext
              Specifies which extension to  use  on  compressed  logfiles,  if
              compression  is  enabled.   The  default  follows  that  of  the
              configured compression command.

       compressoptions
              Command line options may be passed to the  compression  program,
              if  one  is  in use.  The default, for gzip(1), is "-9" (maximum
              compression).

       copy   Make a copy of the log file, but don't change  the  original  at
              all.   This option can be used, for instance, to make a snapshot
              of the current log file, or when some  other  utility  needs  to
              truncate  or  parse  the  file.   When  this option is used, the
              create option will have no effect, as the old log file stays  in
              place.

       copytruncate
              Truncate  the  original  log  file  to  zero size in place after
              creating a  copy,  instead  of  moving  the  old  log  file  and
              optionally creating a new one.  It can be used when some program
              cannot be told to close its  logfile  and  thus  might  continue
              writing (appending) to the previous log file forever.  Note that
              there is a very small time slice between copying  the  file  and
              truncating  it,  so  some logging data might be lost.  When this
              option is used, the create option will have no  effect,  as  the
              old log file stays in place.

       create mode owner group
              Immediately after rotation (before the postrotate script is run)
              the log file is created (with the same name as the log file just
              rotated).   mode  specifies  the  mode for the log file in octal
              (the same as chmod(2)), owner specifies the user name  who  will
              own  the  log  file,  and group specifies the group the log file
              will belong to. Any of the log file attributes may  be  omitted,
              in  which  case  those  attributes for the new file will use the
              same values as the original log file for the omitted attributes.
              This option can be disabled using the nocreate option.

       daily  Log files are rotated every day.

       dateext
              Archive  old versions of log files adding a daily extension like
              YYYYMMDD instead of simply adding a number. The extension may be
              configured using the dateformat option.

       dateformat format_string
              Specify  the extension for dateext using the notation similar to
              strftime(3) function. Only  %Y  %m  %d  and  %s  specifiers  are
              allowed.   The  default  value  is  -%Y%m%d.  Note that also the
              character separating log name from the extension is part of  the
              dateformat  string.  The  system  clock must be set past Sep 9th
              2001 for %s to work correctly.

       delaycompress
              Postpone compression of  the  previous  log  file  to  the  next
              rotation  cycle.   This only has effect when used in combination
              with compress.  It can be used when some program cannot be  told
              to  close  its  logfile  and  thus might continue writing to the
              previous log file for some time.

       extension ext
              Log files with ext extension can keep it after the rotation.  If
              compression  is  used,  the compression extension (normally .gz)
              appears  after  ext.  For  example  you  have  a  logfile  named
              mylog.foo  and  want  to  rotate it to mylog.1.foo.gz instead of
              mylog.foo.1.gz.

       ifempty
              Rotate the  log  file  even  if  it  is  empty,  overriding  the
              notifempty option (ifempty is the default).

       include file_or_directory
              Reads the file given as an argument as if it was included inline
              where the include directive appears. If a  directory  is  given,
              most of the files in that directory are read in alphabetic order
              before processing of the  including  file  continues.  The  only
              files  which  are  ignored are files which are not regular files
              (such as directories and named pipes) and files whose names  end
              with  one  of the taboo extensions, as specified by the tabooext
              directive.  The include directive may not appear  inside  a  log
              file definition.

       mail address
              When a log is rotated out of existence, it is mailed to address.
              If no mail should be generated by a particular log,  the  nomail
              directive may be used.

       mailfirst
              When using the mail command, mail the just-rotated file, instead
              of the about-to-expire file.

       maillast
              When using the mail  command,  mail  the  about-to-expire  file,
              instead of the just-rotated file (this is the default).

       maxage count
              Remove  rotated  logs  older  than <count> days. The age is only
              checked if the logfile is to be rotated. The files are mailed to
              the configured address if maillast and mail are configured.

       minsize size
              Log files are rotated when they grow bigger than size bytes, but
              not before the  additionally  specified  time  interval  (daily,
              weekly, monthly, or yearly).  The related size option is similar
              except that it is mutually  exclusive  with  the  time  interval
              options,  and  it  causes log files to be rotated without regard
              for the last rotation time.  When minsize is used, both the size
              and timestamp of a log file are considered.

       missingok
              If  the  log  file  is  missing,  go  on to the next one without
              issuing an error message. See also nomissingok.

       monthly
              Log files are rotated the first time logrotate is run in a month
              (this is normally on the first day of the month).

       nocompress
              Old versions of log files are not compressed. See also compress.

       nocopy Do  not copy the original log file and leave it in place.  (this
              overrides the copy option).

       nocopytruncate
              Do not truncate the original log file in place after creating  a
              copy (this overrides the copytruncate option).

       nocreate
              New  log  files  are  not  created  (this  overrides  the create
              option).

       nodelaycompress
              Do not postpone compression of the previous log file to the next
              rotation cycle (this overrides the delaycompress option).

       nodateext
              Do  not  archive   old versions of log files with date extension
              (this overrides the dateext option).

       nomail Do not mail old log files to any address.

       nomissingok
              If a log file does not  exist,  issue  an  error.  This  is  the
              default.

       noolddir
              Logs  are rotated in the directory they normally reside in (this
              overrides the olddir option).

       nosharedscripts
              Run prerotate and postrotate scripts for every log file which is
              rotated  (this  is  the default, and overrides the sharedscripts
              option). If the scripts exit with error, the  remaining  actions
              will not be executed for the affected log only.

       noshred
              Do not use shred when deleting old log files. See also shred.

       notifempty
              Do not rotate the log if it is empty (this overrides the ifempty
              option).

       olddir directory
              Logs are moved into directory for rotation. The  directory  must
              be  on  the  same physical device as the log file being rotated,
              and is assumed to be relative to the directory holding  the  log
              file unless an absolute path name is specified. When this option
              is used all old versions of the log end up in  directory.   This
              option may be overridden by the noolddir option.

       postrotate/endscript
              The  lines  between postrotate and endscript (both of which must
              appear on lines by themselves) are executed after the  log  file
              is  rotated.  These directives may only appear inside a log file
              definition.   See  also   prerotate.   See   sharedscripts   and
              nosharedscripts for error handling.

       prerotate/endscript
              The  lines  between  prerotate and endscript (both of which must
              appear on lines by themselves) are executed before the log  file
              is  rotated  and only if the log will actually be rotated. These
              directives may only appear inside a log  file  definition.   See
              also  postrotate.   See  sharedscripts  and  nosharedscripts for
              error handling.

       firstaction/endscript
              The lines between firstaction and endscript (both of which  must
              appear  on lines by themselves) are executed once before all log
              files that match the  wildcarded  pattern  are  rotated,  before
              prerotate  script  is  run  and  only  if  at least one log will
              actually be rotated. These directives may only appear  inside  a
              log  file definition. If the script exits with error, no further
              processing is done. See also lastaction.

       lastaction/endscript
              The lines between lastaction and endscript (both of  which  must
              appear  on  lines by themselves) are executed once after all log
              files that match  the  wildcarded  pattern  are  rotated,  after
              postrotate  script  is  run  and  only  if  at  least one log is
              rotated. These directives may only  appear  inside  a  log  file
              definition.  If  the  script  exits  with  error,  just an error
              message is  shown  (as  this  is  the  last  action).  See  also
              firstaction.

       rotate count
              Log files are rotated count times before being removed or mailed
              to the address specified in a mail directive. If count is 0, old
              versions are removed rather than rotated.

       size size
              Log  files are rotated when they grow bigger than size bytes. If
              size is followed by k, the size is assumed to be  in  kilobytes.
              If  the  M  is used, the size is in megabytes, and if G is used,
              the size is in gigabytes. So size 100, size 100k, size 100M  and
              size 100G are all valid.

       sharedscripts
              Normally,  prerotate and postrotate scripts are run for each log
              which is rotated, meaning  that  a  single  script  may  be  run
              multiple  times  for log file entries which match multiple files
              (such  as  the  /var/log/news/*  example).  If  sharedscript  is
              specified,  the  scripts  are  only run once, no matter how many
              logs match the wildcarded pattern.  However, if none of the logs
              in  the pattern require rotating, the scripts will not be run at
              all. If the scripts exit with error, the remaining actions  will
              not  be  executed  for  any  logs.  This  option  overrides  the
              nosharedscripts option and implies create option.

       shred  Delete log files using  shred  -u  instead  of  unlink().   This
              should  ensure  that logs are not readable after their scheduled
              deletion; this is off by default.  See also noshred.

       shredcycles count
              Asks GNU shred(1) to  overwite  log  files  count  times  before
              deletion.  Without this option, shred's default will be used.

       start count
              This is the number to use as the base for rotation. For example,
              if you specify 0, the logs will be created with a  .0  extension
              as they are rotated from the original log files.  If you specify
              9, log files will be created with a  .9,  skipping  0-8.   Files
              will  still  be  rotated  the number of times specified with the
              rotate directive.

       tabooext [+] list
              The current taboo extension list is  changed  (see  the  include
              directive  for  information  on  the  taboo  extensions). If a +
              precedes the list of extensions,  the  current  taboo  extension
              list  is  augmented,  otherwise  it is replaced. At startup, the
              taboo extension list  contains  .rpmorig,  .rpmsave,  ,v,  .swp,
              .rpmnew, ~, .cfsaved, .rhn-cfg-tmp-*,
               .dpkg-dist, .dpkg-old, .dpkg-new, .disabled.

       weekly Log  files  are  rotated if the current weekday is less than the
              weekday of the last rotation or if more than a week  has  passed
              since  the  last rotation. This is normally the same as rotating
              logs on the first day of the week, but if logrotate is not being
              run  every  night  a log rotation will happen at the first valid
              opportunity.

       yearly Log files are rotated if the current year is not the same as the
              last rotation.

FILES

       /var/lib/logrotate.status  Default state file.
       /etc/logrotate.conf        Configuration options.

SEE ALSO

       gzip(1)

NOTES

       The killall(1) program in Debian is found in the psmisc package.

AUTHORS

       Erik Troan <ewt@redhat.com>
       Preston Brown <pbrown@redhat.com>
       Corrections and changes for Debian by Paul Martin <pm@debian.org>