Provided by: libarchive-dev_3.0.3-6ubuntu1_amd64 bug

NAME

     libarchive-formats — archive formats supported by the libarchive library

DESCRIPTION

     The libarchive(3) library reads and writes a variety of streaming archive formats.
     Generally speaking, all of these archive formats consist of a series of “entries”.  Each
     entry stores a single file system object, such as a file, directory, or symbolic link.

     The following provides a brief description of each format supported by libarchive, with some
     information about recognized extensions or limitations of the current library support.  Note
     that just because a format is supported by libarchive does not imply that a program that
     uses libarchive will support that format.  Applications that use libarchive specify which
     formats they wish to support, though many programs do use libarchive convenience functions
     to enable all supported formats.

   Tar Formats
     The libarchive(3) library can read most tar archives.  However, it only writes POSIX-
     standard “ustar” and “pax interchange” formats.

     All tar formats store each entry in one or more 512-byte records.  The first record is used
     for file metadata, including filename, timestamp, and mode information, and the file data is
     stored in subsequent records.  Later variants have extended this by either appropriating
     undefined areas of the header record, extending the header to multiple records, or by
     storing special entries that modify the interpretation of subsequent entries.

     gnutar  The libarchive(3) library can read GNU-format tar archives.  It currently supports
             the most popular GNU extensions, including modern long filename and linkname
             support, as well as atime and ctime data.  The libarchive library does not support
             multi-volume archives, nor the old GNU long filename format.  It can read GNU sparse
             file entries, including the new POSIX-based formats, but cannot write GNU sparse
             file entries.

     pax     The libarchive(3) library can read and write POSIX-compliant pax interchange format
             archives.  Pax interchange format archives are an extension of the older ustar
             format that adds a separate entry with additional attributes stored as key/value
             pairs immediately before each regular entry.  The presence of these additional
             entries is the only difference between pax interchange format and the older ustar
             format.  The extended attributes are of unlimited length and are stored as UTF-8
             Unicode strings.  Keywords defined in the standard are in all lowercase; vendors are
             allowed to define custom keys by preceding them with the vendor name in all
             uppercase.  When writing pax archives, libarchive uses many of the SCHILY keys
             defined by Joerg Schilling's “star” archiver and a few LIBARCHIVE keys.  The
             libarchive library can read most of the SCHILY keys and most of the GNU keys
             introduced by GNU tar.  It silently ignores any keywords that it does not
             understand.

     restricted pax
             The libarchive library can also write pax archives in which it attempts to suppress
             the extended attributes entry whenever possible.  The result will be identical to a
             ustar archive unless the extended attributes entry is required to store a long file
             name, long linkname, extended ACL, file flags, or if any of the standard ustar data
             (user name, group name, UID, GID, etc) cannot be fully represented in the ustar
             header.  In all cases, the result can be dearchived by any program that can read
             POSIX-compliant pax interchange format archives.  Programs that correctly read ustar
             format (see below) will also be able to read this format; any extended attributes
             will be extracted as separate files stored in PaxHeader directories.

     ustar   The libarchive library can both read and write this format.  This format has the
             following limitations:
             ·   Device major and minor numbers are limited to 21 bits.  Nodes with larger
                 numbers will not be added to the archive.
             ·   Path names in the archive are limited to 255 bytes.  (Shorter if there is no /
                 character in exactly the right place.)
             ·   Symbolic links and hard links are stored in the archive with the name of the
                 referenced file.  This name is limited to 100 bytes.
             ·   Extended attributes, file flags, and other extended security information cannot
                 be stored.
             ·   Archive entries are limited to 8 gigabytes in size.
             Note that the pax interchange format has none of these restrictions.

     The libarchive library also reads a variety of commonly-used extensions to the basic tar
     format.  These extensions are recognized automatically whenever they appear.

     Numeric extensions.
             The POSIX standards require fixed-length numeric fields to be written with some
             character position reserved for terminators.  Libarchive allows these fields to be
             written without terminator characters.  This extends the allowable range; in
             particular, ustar archives with this extension can support entries up to 64
             gigabytes in size.  Libarchive also recognizes base-256 values in most numeric
             fields.  This essentially removes all limitations on file size, modification time,
             and device numbers.

     Solaris extensions
             Libarchive recognizes ACL and extended attribute records written by Solaris tar.
             Currently, libarchive only has support for old-style ACLs; the newer NFSv4 ACLs are
             recognized but discarded.

     The first tar program appeared in Seventh Edition Unix in 1979.  The first official standard
     for the tar file format was the “ustar” (Unix Standard Tar) format defined by POSIX in 1988.
     POSIX.1-2001 extended the ustar format to create the “pax interchange” format.

   Cpio Formats
     The libarchive library can read a number of common cpio variants and can write “odc” and
     “newc” format archives.  A cpio archive stores each entry as a fixed-size header followed by
     a variable-length filename and variable-length data.  Unlike the tar format, the cpio format
     does only minimal padding of the header or file data.  There are several cpio variants,
     which differ primarily in how they store the initial header: some store the values as octal
     or hexadecimal numbers in ASCII, others as binary values of varying byte order and length.

     binary  The libarchive library transparently reads both big-endian and little-endian
             variants of the original binary cpio format.  This format used 32-bit binary values
             for file size and mtime, and 16-bit binary values for the other fields.

     odc     The libarchive library can both read and write this POSIX-standard format, which is
             officially known as the “cpio interchange format” or the “octet-oriented cpio
             archive format” and sometimes unofficially referred to as the “old character
             format”.  This format stores the header contents as octal values in ASCII.  It is
             standard, portable, and immune from byte-order confusion.  File sizes and mtime are
             limited to 33 bits (8GB file size), other fields are limited to 18 bits.

     SVR4    The libarchive library can read both CRC and non-CRC variants of this format.  The
             SVR4 format uses eight-digit hexadecimal values for all header fields.  This limits
             file size to 4GB, and also limits the mtime and other fields to 32 bits.  The SVR4
             format can optionally include a CRC of the file contents, although libarchive does
             not currently verify this CRC.

     Cpio first appeared in PWB/UNIX 1.0, which was released within AT&T in 1977.  PWB/UNIX 1.0
     formed the basis of System III Unix, released outside of AT&T in 1981.  This makes cpio
     older than tar, although cpio was not included in Version 7 AT&T Unix.  As a result, the tar
     command became much better known in universities and research groups that used Version 7.
     The combination of the find and cpio utilities provided very precise control over file
     selection.  Unfortunately, the format has many limitations that make it unsuitable for
     widespread use.  Only the POSIX format permits files over 4GB, and its 18-bit limit for most
     other fields makes it unsuitable for modern systems.  In addition, cpio formats only store
     numeric UID/GID values (not usernames and group names), which can make it very difficult to
     correctly transfer archives across systems with dissimilar user numbering.

   Shar Formats
     A “shell archive” is a shell script that, when executed on a POSIX-compliant system, will
     recreate a collection of file system objects.  The libarchive library can write two
     different kinds of shar archives:

     shar    The traditional shar format uses a limited set of POSIX commands, including echo(1),
             mkdir(1), and sed(1).  It is suitable for portably archiving small collections of
             plain text files.  However, it is not generally well-suited for large archives (many
             implementations of sh(1) have limits on the size of a script) nor should it be used
             with non-text files.

     shardump
             This format is similar to shar but encodes files using uuencode(1) so that the
             result will be a plain text file regardless of the file contents.  It also includes
             additional shell commands that attempt to reproduce as many file attributes as
             possible, including owner, mode, and flags.  The additional commands used to restore
             file attributes make shardump archives less portable than plain shar archives.

   ISO9660 format
     Libarchive can read and extract from files containing ISO9660-compliant CDROM images.  In
     many cases, this can remove the need to burn a physical CDROM just in order to read the
     files contained in an ISO9660 image.  It also avoids security and complexity issues that
     come with virtual mounts and loopback devices.  Libarchive supports the most common
     Rockridge extensions and has partial support for Joliet extensions.  If both extensions are
     present, the Joliet extensions will be used and the Rockridge extensions will be ignored.
     In particular, this can create problems with hardlinks and symlinks, which are supported by
     Rockridge but not by Joliet.

   Zip format
     Libarchive can read and write zip format archives that have uncompressed entries and entries
     compressed with the “deflate” algorithm.  Older zip compression algorithms are not
     supported.  It can extract jar archives, archives that use Zip64 extensions and many self-
     extracting zip archives.  Libarchive reads Zip archives as they are being streamed, which
     allows it to read archives of arbitrary size.  It currently does not use the central
     directory; this limits libarchive's ability to support some self-extracting archives and
     ones that have been modified in certain ways.

   Archive (library) file format
     The Unix archive format (commonly created by the ar(1) archiver) is a general-purpose format
     which is used almost exclusively for object files to be read by the link editor ld(1).  The
     ar format has never been standardised.  There are two common variants: the GNU format
     derived from SVR4, and the BSD format, which first appeared in 4.4BSD.  The two differ
     primarily in their handling of filenames longer than 15 characters: the GNU/SVR4 variant
     writes a filename table at the beginning of the archive; the BSD format stores each long
     filename in an extension area adjacent to the entry.  Libarchive can read both extensions,
     including archives that may include both types of long filenames.  Programs using libarchive
     can write GNU/SVR4 format if they provide a filename table to be written into the archive
     before any of the entries.  Any entries whose names are not in the filename table will be
     written using BSD-style long filenames.  This can cause problems for programs such as GNU ld
     that do not support the BSD-style long filenames.

   mtree
     Libarchive can read and write files in mtree(5) format.  This format is not a true archive
     format, but rather a textual description of a file hierarchy in which each line specifies
     the name of a file and provides specific metadata about that file.  Libarchive can read all
     of the keywords supported by both the NetBSD and FreeBSD versions of mtree(1), although many
     of the keywords cannot currently be stored in an archive_entry object.  When writing,
     libarchive supports use of the archive_write_set_options(3) interface to specify which
     keywords should be included in the output.  If libarchive was compiled with access to
     suitable cryptographic libraries (such as the OpenSSL libraries), it can compute hash
     entries such as sha512 or md5 from file data being written to the mtree writer.

     When reading an mtree file, libarchive will locate the corresponding files on disk using the
     contents keyword if present or the regular filename.  If it can locate and open the file on
     disk, it will use that to fill in any metadata that is missing from the mtree file and will
     read the file contents and return those to the program using libarchive.  If it cannot
     locate and open the file on disk, libarchive will return an error for any attempt to read
     the entry body.

   RAR
     libarchive has limited support to read files in RAR format. Currently, libarchive can read
     single RAR files in RARv3 format which have been either created uncompressed, or compressed
     using any of the compression methods supported by the RARv3 format. libarchive can also
     extract RAR files which have been created as self-extracting RAR files.

SEE ALSO

     ar(1), cpio(1), mkisofs(1), shar(1), tar(1), zip(1), zlib(3), cpio(5), mtree(5), tar(5)