Provided by: resource-agents_3.9.2-5ubuntu4_i386
ocf_heartbeat_ethmonitor - Monitors network interfaces
ethmonitor [start | stop | status | monitor | meta-data | validate-all]
Monitor the vitality of a local network interface.
You may setup this RA as a clone resource to monitor the network
interfaces on different nodes, with the same interface name. This is
not related to the IP adress or the network on which a interface is
configured. You may use this RA to move resources away from a node,
which has a faulty interface or prevent moving resources to such a
node. This gives you independend control of the resources, without
involving cluster intercommunication. But it requires your nodes to
have more than one network interface.
The resource configuration requires a monitor operation, because the
monitor does the main part of the work. In addition to the resource
configuration, you need to configure some location contraints, based on
a CIB attribute value. The name of the attribute value is configured in
the 'name' option of this RA.
Example constraint configuration: location loc_connected_node
my_resource_grp rule ="rule_loc_connected_node" -INF: ethmonitor eq 0
The ethmonitor works in 3 different modes to test the interface
vitality. 1. call ip to see if the link status is up (if link is down
-> error) 2. call ip an watch the RX counter (if packages come around
in a certain time -> success) 3. call arping to check wether any of the
IPs found in the lokal ARP cache answers an ARP REQUEST (one answer ->
success) 4. return error
The name of the network interface which should be monitored (e.g.
eth0). (unique, required, string, no default)
The name of the CIB attribute to set. This is the name to be used
in the constraints. Defaults to "ethmonitor-'interface_name'".
(unique, optional, string, no default)
Multiplier for the value of the CIB attriobute specified in
parameter name. (optional, integer, default 1)
Specify how often the interface will be monitored, before the
status is set to failed. You need to set the timeout of the
monitoring operation to at least repeat_count * repeat_interval
(optional, integer, default 5)
Specify how long to wait in seconds between the repeat_counts.
(optional, integer, default 10)
Timeout for the RX packet counter. Stop listening for packet
counter changes after the given number of seconds. (optional,
integer, default 5)
Number of ARP REQUEST packets to send for every IP. Usually one ARP
REQUEST (arping) is send (optional, integer, default 1)
Time in seconds to wait for ARP REQUESTs (all packets of
arping_count). This is to limit the time for arp requests, to be
able to send requests to more than one node, without running in the
monitor operation timeout. (optional, integer, default 1)
Maximum number of IPs from ARP cache list to check for ARP REQUEST
(arping) answers. Newest entries are tried first. (optional,
integer, default 5)
This resource agent supports the following actions (operations):
Starts the resource. Suggested minimum timeout: 20s.
Stops the resource. Suggested minimum timeout: 20s.
Performs a status check. Suggested minimum timeout: 20s. Suggested
Performs a detailed status check. Suggested minimum timeout: 20s.
Suggested interval: 10s.
Retrieves resource agent metadata (internal use only). Suggested
minimum timeout: 5s.
Performs a validation of the resource configuration. Suggested
minimum timeout: 20s.
The following is an example configuration for a ethmonitor resource
using the crm(8) shell:
primitive p_ethmonitor ocf:heartbeat:ethmonitor \
op monitor depth="0" timeout="20s" interval="10s"
Linux-HA contributors (see the resource agent source for information
about individual authors)