Provided by: eagle_5.12.0-1ubuntu1_i386
eagle - Easily Applicable Graphical Layout Editor
eagle [options] [file] [layers]
EAGLE is a printed circuit board (PCB) design tool that combines schematic capture, layout editing and autorouting.
Most of the options are intended for use with the CAM Processor in command line mode. Options are either switches that turn a certain feature on or off, or set a certain parameter to a given value. Switch options are followed by a '+' or '-' sign, which turns the given option 'on' or 'off', respectively. In the following list of all options switch options are shown with their default value. If a switch option is 'off' by default, it can be turned 'on' by simply using the option character (the '+' sign is implicit). With tolerance options values that have a positive sign define positive tolerances, negative signs define negative tolerances, and values without a sign define 'plus/minus' tolerances. -C command Executes the given command in an editor window. A file name (board, schematic or library) must be given, so that an editor window will be opened in which the command can be executed. -D tolerance Tolerance for draw type apertures (0.1 = 10%). Default: 0 -E tolerance Tolerance for drills (0.1 = 10%). Default: 0 -F tolerance Tolerance for flash type apertures (0.1 = 10%). Default: 0 -N No command line prompts. Turns off the command line message prompts in the CAM Processor. This is mostly useful for fully automated CAM batch jobs. -O+ Optimize movement for pen plotters, photo plotters and drill stations. Default: on -P layer=pen For pen plotters this option defines which layer is to be printed with which pen (color). layer can range from 1..255, pen can range from 1..255. -R rackfile Drill rack file. -S scriptfile Define a different startup script file name. Default: eagle.scr -W wheelfile Aperture wheel file. -X- Execute the CAM Processor in command line mode. -a- Emulate annulus apertures. This option only works if the -e option is also turned on. Default: off -c+ Assert positive coordinates ("auto fit"). Moves the output data so that everything is located in the positive coordinate area. Default: on -d device CAM Processor output device (-d? for a list of all known devices). -e- Emulate unavailable apertures with smaller ones. Options -a and -t can be used to define whether annulus and thermal apertures should also be emulated. Default: off -f+ Fill pads. Defines wehther the drill holes of pads and vias should be filles or not. Default: on -h pageheight Page height (inch) for printers. -m- Mirror output. Note that this can cause negative coordinates, so you might want to make sure that the -c option is on. Default: off -o outputfile Output filename. -p pendiameter Pen diameter (mm) for pen plotters. Default: 0 -q- Quick plot, which draws only the outlines of objects. Default: off -r- Rotate output by 90 degrees. Note that this can cause negative coordinates, so you might want to make sure that the -c option is on. Default: off -s scalefactor Scale factor for the generated output. Values smaller than 1.0 generate a shrinked output. If scalefactor has a negative (integer) value, the actual scale factor will be selected automatically so that the drawing will fit on the number of pages given by the absolute value of scalefactor. Default: 1.0 -t- Emulate thermal apertures. This option only works if the -e option is also turned on. Default: off -u- Output upside down (i.e. rotate by 180 degrees). Note that this can cause negative coordinates, so you might want to make sure that the -c option is on. Default: off -v penvelocity Pen velocity (in cm/s, for pen plotters that support this feature). The default value of 0 selects the plotter's default pen velocity. Default: 0 -w pagewidth Page width (inch) for printers. -x offset Offset in x direction (inch). Default: 0.0 -y offset Offset in y direction (inch). Default: 0.0
By default, EAGLE is installed in /opt/eagle-5.12.0 (if installed as user 'root'), or ~/eagle-5.12.0 (under the user's home directory), but you can install it into any other directory you might prefer. The following subdirectories are located below this directory: bin Executable programs cam CAM Processor files doc Documentation files dru Design Rules files lbr Part library files projects Example board and schematic files scr Script files ulp User Language Programs
Context sensitive online help information is provided as an HTML file. EAGLE implements its own help viewer, but the help file can of course also be viewed with any other HTML viewer.
SIGTERM Terminates the program. Any modified files will not be saved.
0 Successful program execution. 1 CAM Processor warning. >1 An error has occurred.
~/.eaglerc User specific parameters are stored in the file .eaglerc under the user's home directory.
This is EAGLE version 5.12.0.
EAGLE is produced by CadSoft Computer GmbH (http://www.cadsoft.de). Copyright (c) 1988-2011 CadSoft Computer GmbH.