Provided by: printer-driver-foo2zjs_20111202dfsg0-1ubuntu1_amd64 bug

NAME

       foo2hp2600-wrapper - Convert Postscript into a ZJS printer stream

SYNOPSIS

       foo2hp2600-wrapper [options] [ps-file]

DESCRIPTION

       foo2hp2600-wrapper is a Foomatic compatible printer wrapper for the foo2hp printer driver.
       This script reads a Postscript ps-file or standard input and converts it  to  Zenographics
       ZjStream  printer  format  for  driving  the Hewlett-Packard 2600n color laser printer and
       other Zenographics-based printers.

       This script can be used in a standalone fashion, but is  intended  to  be  called  from  a
       printer spooler system which uses the Foomatic printer database.

COMMAND LINE OPTIONS

   Normal Options
       These  are  the  options  used  to  select  the parameters of a print job that are usually
       controlled on a per job basis.

       -b bits
              Number of bits per plane. 1 or 2. [1].

       -c     Print in color (else monochrome).

       -d duplex
              Duplex code to send to printer [1].
              │        │               │
              │1   off │ 2   long edge │ 3   short edge

       -m media
              Media code to send to printer [1].

              ──────────────────────────
              Media          HPLJ 2600n
              ──────────────────────────
              plain               1
              preprinted        514
              letterhead        513
              transparency        2
              prepunched        515
              labels            265
              bond              260
              recycled          516
              color             512
              tough             276
              envelope          267
              light             258
              heavy             262
              cardstock         261
              lightglossy       268
              glossy            269
              heavyglossy       270
              cover             277
              photo             278

       -p paper
              Paper size code to send to printer [1].

              ┌─────────────────┬─────────────┐
              │ 1   letter      │  9   A4     │
              │ 5   legal       │ 11   A5     │
              │ 7   executive   │ 13   B5jis  │
              │20   env #10     │ 27   env DL │
              │28   env C5      │ 34   env B5 │
              │37   env Monarch │             │
              └─────────────────┴─────────────┘
       -n copies
              Number of copies [1].

       -r xresxyres
              Set device resolution in pixels/inch [1200x600].

       -s source
              Source (Input Slot) code to send to printer [7].
              │           │
              │1   tray 2 │ 4   manual/tray 1
              │2   tray 3 │ 7   auto

       -t     Draft mode.  Every other pixel is white.

       -2 -3 -4 -5 -6 -8 -9 -10 -12 -14 -15 -16 -18
              Print in N-up.  Requires the psutils package.

       -o orient
              Orientation used for N-up.

              Portrait    -op   (normal)
              Landscape   -ol   (rotated 90 degrees anticlockwise)
              Seascape    -os   (rotated 90 degrees clockwise)

   Printer Tweaking Options
       These are the options used to customize the operation of foo2hp for a particular printer.

       -u xoffxyoff
              Set the offset of the start of the printable region from the upper left corner,  in
              pixels  [varies  with  paper  size].   The  defaults  should work on the 2200DL and
              2300DL, and have not been tested on any other printers.

       -l xoffxyoff
              Set the offset of the end of the printable region from the lower right  corner,  in
              pixels  [varies  with  paper  size].   The  defaults  should work on the 2200DL and
              2300DL, and have not been tested on any other printers.

       -L mask
              Send the logical clipping values from -u/-l in  the  ZjStream.   foo2hp2600-wrapper
              always  runs  Ghostscript  with the ideal page dimensions, so that the scale of the
              image is correct, regardless whether or not the printer  has  unprintable  regions.
              This  option  is  used  to  move the position of the clipped image back to where it
              belongs on the page.  The default is to send the amount which was clipped by -u and
              -l, and should be good in most cases.

              0   don't send any logical clipping amounts
              1   only send Y clipping amount
              2   only send X clipping amount
              3   send both X and Y clipping amounts

       -O parm=val
              Alignment  of  CMYK.  parm is c, m, y, or k.  val is in rows.  Multiple options are
              allowed.  The default is "-Oc=0 -Om=0 -Oy=0 -Ok=0".

       -P     Do not send START_PLANE  codes  on  monochrome  output.   May  be  needed  by  some
              monochrome-only printers, such as the HP LaserJet 1000.

       -X padlen
              Add  extra  zero  padding  to  the  end  of BID segments.  The default is 16 bytes.
              Padding 16 bytes of zeroes is needed for  older  ZjStream  printers,  such  as  the
              Minolta  2200DL and HP LaserJet 1000, and seems harmless to newer ones, such as the
              Minolta 2300DL.  So the default should be good for all cases.

       -z model
              Model: Model: 0=HP CLJ 1600/2600n; 1=HP CLJ CP1215

   Color Tweaking Options
       These are the options used to control the quality of color output.   Color  correction  is
       currently a WORK IN PROGRESS.

       -g gsopts
              Additional  options to pass to Ghostscript, such as -g“-dDITHERPPI=nnn”, etc.  This
              option may appear more than once.

       -G profile.icm
              Convert profile.icm to a Postscript color rendering dictionary (CRD) using foo2zjs-
              icc2ps  and  adjust  the  printer  colors by using the Postscript setcolorrendering
              operator.  If profile.icm is none.icm, then  prepare  for  ordering  a  ICM  custom
              printer profile (i.e. from www.ICCFactory.com).

       -G gamma-file.ps
              Prepend gamma-file.ps to the Postscript input to perform color correction using the
              setcolortransfer Postscript operator.  For example, the file might contain:
              {0.333 exp} {0.333 exp} {0.333 exp} {0.333 exp} setcolortransfer

       -I intent
              Select  profile  intent  from  the   ICM   file.    0=Perceptual,   1=Colorimetric,
              2=Saturation, 3=Absolute.  Default is 0 (perceptual).

   Debugging Options
       These options are used for debugging foo2hp and its wrapper.

       -S plane
              Output  just  a  single  color  plane  from a color print and print it on the black
              plane.  The default is to output all color planes.

              1   Cyan
              2   Magenta
              3   Yellow
              4   Black

       -D level
              Set Debug level [0].

EXAMPLES

       Create a monochrome ZjStream from a Postscript document, examine it,  and  then  print  it
       using a RAW print queue:

              foo2hp2600-wrapper testpage.ps > testpage.zm
              zjsdecode < testpage.zm
              lpr -P raw testpage.zm

       Create a color ZjStream stream from a Postscript document:

              foo2hp2600-wrapper -c testpage.ps > testpage.zc

FILES

       /usr/bin/foo2hp2600-wrapper

SEE ALSO

       foo2hp(1), zjsdecode(1)

AUTHOR

       Rick Richardson <rick.richardson@comcast.net>
       http://foo2hp.rkkda.com/