Provided by: ncurses-bin_5.9-4_amd64 bug

NAME

       infocmp - compare or print out terminfo descriptions

SYNOPSIS

       infocmp [-1CEFGILTUVcdegilnpqrtux]
             [-v n] [-s d| i| l| c] [-R subset]
             [-w width] [-A directory] [-B directory]
             [termname...]

DESCRIPTION

       infocmp  can  be  used  to  compare  a  binary terminfo entry with other terminfo entries,
       rewrite a terminfo description to take advantage of the use= terminfo field, or print  out
       a terminfo description from the binary file (term) in a variety of formats.  In all cases,
       the boolean fields will be printed first, followed by the numeric fields, followed by  the
       string fields.

   Default Options
       If no options are specified and zero or one termnames are specified, the -I option will be
       assumed.  If more than one termname is specified, the -d option will be assumed.

   Comparison Options [-d] [-c] [-n]
       infocmp compares the terminfo description of the first terminal termname with each of  the
       descriptions  given by the entries for the other terminal's termnames.  If a capability is
       defined for only one of the terminals, the value returned will depend on the type  of  the
       capability:  F  for  boolean  variables,  -1  for  integer  variables, and NULL for string
       variables.

       The -d option produces a list of each capability that is different  between  two  entries.
       This  option  is  useful  to show the difference between two entries, created by different
       people, for the same or similar terminals.

       The -c option produces a list of each capability  that  is  common  between  two  entries.
       Capabilities  that  are  not set are ignored.  This option can be used as a quick check to
       see if the -u option is worth using.

       The -n option produces a list of  each  capability  that  is  in  neither  entry.   If  no
       termnames are given, the environment variable TERM will be used for both of the termnames.
       This can be used as a quick check to see if anything was left out of a description.

   Source Listing Options [-I] [-L] [-C] [-r]
       The -I, -L, and -C options will produce a source listing for each terminal named.

                      -I   use the terminfo names
                      -L   use the long C variable name listed in <term.h>
                      -C   use the termcap names
                      -r   when using -C, put out all capabilities in termcap form

       If no termnames are given, the environment variable TERM will be  used  for  the  terminal
       name.

       The  source produced by the -C option may be used directly as a termcap entry, but not all
       parameterized strings can be changed to the  termcap  format.   infocmp  will  attempt  to
       convert  most of the parameterized information, and anything not converted will be plainly
       marked in the output and commented out.  These should be edited by hand.

       All padding information for strings will be collected together and placed at the beginning
       of  the  string  where  termcap expects it.  Mandatory padding (padding information with a
       trailing '/') will become optional.

       All termcap variables no longer supported by terminfo, but which are derivable from  other
       terminfo  variables,  will  be  output.  Not all terminfo capabilities will be translated;
       only those variables which were part of termcap will normally be output.   Specifying  the
       -r  option  will  take  off  this  restriction,  allowing all capabilities to be output in
       termcap form.

       Note that because padding is collected  to  the  beginning  of  the  capability,  not  all
       capabilities are output.  Mandatory padding is not supported.  Because termcap strings are
       not as flexible, it is not always possible to convert a terminfo string capability into an
       equivalent termcap format.  A subsequent conversion of the termcap file back into terminfo
       format will not necessarily reproduce the original terminfo source.

       Some common terminfo parameter sequences, their termcap  equivalents,  and  some  terminal
       types which commonly have such sequences, are:

                     terminfo                    termcap   Representative Terminals
                     ───────────────────────────────────────────────────────────────
                     %p1%c                       %.        adm
                     %p1%d                       %d        hp, ANSI standard, vt100
                     %p1%'x'%+%c                 %+x       concept
                     %i                          %iq       ANSI standard, vt100
                     %p1%?%'x'%>%t%p1%'y'%+%;    %>xy      concept
                     %p2 is printed before %p1   %r        hp

   Use= Option [-u]
       The  -u option produces a terminfo source description of the first terminal termname which
       is relative to the sum of the descriptions given by the entries for  the  other  terminals
       termnames.   It  does this by analyzing the differences between the first termname and the
       other termnames and producing a description with use= fields for the other terminals.   In
       this  manner,  it  is  possible  to  retrofit  generic  terminfo entries into a terminal's
       description.  Or, if two similar terminals exist, but were coded at different times or  by
       different  people  so that each description is a full description, using infocmp will show
       what can be done to change one description to be relative to the other.

       A capability will get printed with an at-sign (@) if it no  longer  exists  in  the  first
       termname,  but  one of the other termname entries contains a value for it.  A capability's
       value gets printed if the value in the first termname is not found in  any  of  the  other
       termname  entries,  or if the first of the other termname entries that has this capability
       gives a different value for the capability than that in the first termname.

       The order of the other termname entries is significant.  Since the terminfo  compiler  tic
       does  a  left-to-right  scan of the capabilities, specifying two use= entries that contain
       differing entries for the same capabilities will produce different  results  depending  on
       the  order  that  the  entries  are  given in.  infocmp will flag any such inconsistencies
       between the other termname entries as they are found.

       Alternatively, specifying a capability after a use= entry that  contains  that  capability
       will  cause  the  second  specification  to  be  ignored.   Using  infocmp  to  recreate a
       description can be a useful check to make sure that everything was specified correctly  in
       the original source description.

       Another  error  that  does  not  cause  incorrect  compiled  files, but will slow down the
       compilation time, is specifying extra use= fields that are superfluous.  infocmp will flag
       any other termname use= fields that were not needed.

   Changing Databases [-A directory] [-B directory]
       The  location  of  the  compiled  terminfo database is taken from the environment variable
       TERMINFO .  If the variable is not defined, or the terminal is not found in that location,
       the system terminfo database, in /usr/share/terminfo, will be used.  The options -A and -B
       may be used to override this location.  The -A option will  set  TERMINFO  for  the  first
       termname  and  the  -B option will set TERMINFO for the other termnames.  With this, it is
       possible to compare descriptions for  a  terminal  with  the  same  name  located  in  two
       different  databases.   This  is  useful  for comparing descriptions for the same terminal
       created by different people.

   Other Options
       -1   causes the fields to be printed out one to a line.  Otherwise,  the  fields  will  be
            printed several to a line to a maximum width of 60 characters.

       -a   tells  infocmp  to  retain  commented-out  capabilities  rather than discarding them.
            Capabilities are commented by prefixing them with a period.

       -E   Dump the capabilities of the given terminal as tables, needed in  the  C  initializer
            for  a  TERMTYPE structure (the terminal capability structure in the <term.h>).  This
            option is useful for preparing versions of the curses library hardwired for  a  given
            terminal  type.   The  tables are all declared static, and are named according to the
            type and the name of the corresponding terminal entry.

            Before ncurses 5.0, the split between the -e and  -E  options  was  not  needed;  but
            support  for  extended  names  required  making  the  arrays of terminal capabilities
            separate from the TERMTYPE structure.

       -e   Dump the capabilities of the given  terminal  as  a  C  initializer  for  a  TERMTYPE
            structure (the terminal capability structure in the <term.h>).  This option is useful
            for preparing versions of the curses library hardwired for a given terminal type.

       -F   compare terminfo files.  This assumes that two  following  arguments  are  filenames.
            The  files  are  searched  for  pairwise  matches  between  entries, with two entries
            considered to match if any of their names do.  The report printed to standard  output
            lists  entries  with  no  matches  in  the other file, and entries with more than one
            match.  For  entries  with  exactly  one  match  it  includes  a  difference  report.
            Normally,  to reduce the volume of the report, use references are not resolved before
            looking for differences, but resolution can be forced by also specifying -r.

       -f   Display  complex  terminfo  strings  which  contain  if/then/else/endif   expressions
            indented for readability.

       -G   Display constant literals in decimal form rather than their character equivalents.

       -g   Display  constant  character  literals  in  quoted  form  rather  than  their decimal
            equivalents.

       -i   Analyze the initialization (is1, is2, is3), and reset (rs1, rs2, rs3), strings in the
            entry.   For  each  string, the code tries to analyze it into actions in terms of the
            other capabilities in the entry, certain  X3.64/ISO  6429/ECMA-48  capabilities,  and
            certain DEC VT-series private modes (the set of recognized special sequences has been
            selected for completeness over the existing terminfo  database).   Each  report  line
            consists  of  the  capability  name,  followed  by  a  colon and space, followed by a
            printable expansion of  the  capability  string  with  sections  matching  recognized
            actions  translated  into  {}-bracketed descriptions.  Here is a list of the DEC/ANSI
            special sequences recognized: i.

                                  Action        Meaning
                                  ─────────────────────────────────────────
                                  RIS           full reset
                                  SC            save cursor
                                  RC            restore cursor
                                  LL            home-down
                                  RSR           reset scroll region
                                  ─────────────────────────────────────────
                                  DECSTR        soft reset (VT320)
                                  S7C1T         7-bit controls (VT220)
                                  ─────────────────────────────────────────
                                  ISO DEC G0    enable DEC graphics for G0
                                  ISO UK G0     enable UK chars for G0
                                  ISO US G0     enable US chars for G0
                                  ISO DEC G1    enable DEC graphics for G1
                                  ISO UK G1     enable UK chars for G1
                                  ISO US G1     enable US chars for G1
                                  ─────────────────────────────────────────
                                  DECPAM        application keypad mode
                                  DECPNM        normal keypad mode
                                  DECANSI       enter ANSI mode
                                  ─────────────────────────────────────────

                                  ECMA[+-]AM    keyboard action mode
                                  ECMA[+-]IRM   insert replace mode
                                  ECMA[+-]SRM   send receive mode
                                  ECMA[+-]LNM   linefeed mode
                                  ─────────────────────────────────────────
                                  DEC[+-]CKM    application cursor keys
                                  DEC[+-]ANM    set VT52 mode
                                  DEC[+-]COLM   132-column mode
                                  DEC[+-]SCLM   smooth scroll
                                  DEC[+-]SCNM   reverse video mode
                                  DEC[+-]OM     origin mode
                                  DEC[+-]AWM    wraparound mode
                                  DEC[+-]ARM    auto-repeat mode

            It also recognizes a SGR action corresponding  to  ANSI/ISO  6429/ECMA  Set  Graphics
            Rendition,  with  the  values  NORMAL,  BOLD, UNDERLINE, BLINK, and REVERSE.  All but
            NORMAL may be prefixed with `+' (turn on) or `-' (turn off).

       An SGR0 designates an empty highlight sequence (equivalent to {SGR:NORMAL}).

       -l   Set output format to terminfo.

       -p   Ignore padding specifications when comparing strings.

       -q   Make the comparison listing shorter by omitting subheadings, and using "-" for absent
            capabilities, "@" for canceled rather than "NULL".

       -Rsubset
            Restrict  output  to a given subset.  This option is for use with archaic versions of
            terminfo like those on SVr1, Ultrix, or HP/UX that do not support  the  full  set  of
            SVR4/XSI  Curses  terminfo;  and  variants such as AIX that have their own extensions
            incompatible with SVr4/XSI.  Available terminfo subsets are "SVr1",  "Ultrix",  "HP",
            and  "AIX";  see terminfo(5) for details.  You can also choose the subset "BSD" which
            selects only capabilities with termcap equivalents recognized by 4.4BSD.

       -s [d|i|l|c]
            The -s option sorts the fields within each type according to the argument below:

            d    leave fields in the order that they are stored in the terminfo database.

            i    sort by terminfo name.

            l    sort by the long C variable name.

            c    sort by the termcap name.

            If the -s option is not given, the fields printed out will be  sorted  alphabetically
            by  the  terminfo  name  within  each  type,  except  in the case of the -C or the -L
            options, which cause the sorting to be done  by  the  termcap  name  or  the  long  C
            variable name, respectively.

       -T   eliminates  size-restrictions  on  the  generated  text.   This  is mainly useful for
            testing and analysis, since the compiled descriptions are  limited  (e.g.,  1023  for
            termcap, 4096 for terminfo).

       -t   tells  tic  to  discard  commented-out  capabilities.  Normally when translating from
            terminfo to termcap, untranslatable capabilities are commented-out.

       -U   tells infocmp to not post-process the data  after  parsing  the  source  file.   This
            feature  helps  when  comparing  the  actual  contents  of two source files, since it
            excludes the inferences that infocmp makes to fill in missing data.

       -V   reports the version of ncurses which was used in this program, and exits.

       -v n prints out tracing information on standard error as the program runs.  Higher  values
            of n induce greater verbosity.

       -w width
            changes the output to width characters.

       -x   print  information  for  user-defined  capabilities.   These  are  extensions  to the
            terminfo repertoire which can be loaded using the -x option of tic.

FILES

       /usr/share/terminfo Compiled terminal description database.

EXTENSIONS

       The -E, -F, -G, -R, -T, -V, -a, -e, -f, -g,  -i,  -l,  -p,  -q  and  -t  options  are  not
       supported in SVr4 curses.

       The  -r  option's  notion  of  `termcap' capabilities is System V Release 4's.  Actual BSD
       curses versions will have a more restricted set.  To see  only  the  4.4BSD  set,  use  -r
       -RBSD.

BUGS

       The -F option of infocmp(1) should be a toe(1) mode.

SEE ALSO

       captoinfo(1), infotocap(1), tic(1), toe(1), ncurses(3NCURSES), terminfo(5).

       This describes ncurses version 5.9 (patch 20110404).

AUTHOR

       Eric S. Raymond <esr@snark.thyrsus.com> and
       Thomas E. Dickey <dickey@invisible-island.net>

                                                                                       infocmp(1)