Provided by: transmission-cli_2.51-0ubuntu1_amd64
transmission-remote — a remote control utility for transmission-daemon(1) and transmission(1)
transmission-remote [host:port | host | port] [-a filenames-or-URLs] [-as] [-AS] [-asd number] [-asu number] [-asc] [-ASC] [-b] [-c path | -C] [-d number | -D] [-e size] [-er | -ep | -et] [--exit] [-f] [-g files] [-G files] [-gsr ratio] [-GSR] [-h] [-i] [-l] [-m | -M] [-n user:pass] [-ne] [-N netrc] [-o | -O] [-p port] [-Bh] [-Bn] [-Bl] [-ph files] [-pl files] [-pn files] [-pr peers] [-r] [-R] [-s | -S] [-sr ratio] [-SR] [-srd] [-si] [-st] [-t all | id | hash] [-hl] [-HL] [-u number | -U] [-utp | -no-utp] [-v] [-V] [-w download-dir] [-x | -X] [-y | -Y] [-pi]
transmission-remote is a remote control utility for transmission(1) and transmission-daemon(1). By default, transmission-remote connects to the transmission session at localhost:9091. Other sessions can be controlled by specifying a different host and/or port.
-a --add filenames-or-URLs Add torrents to transmission. -b --debug Enable debugging mode. -as --alt-speed Use the alternate Limits. -AS --no-alt-speed Don't use the alternate Limits. -asd --alt-speed-downlimit limit Limit the alternate download speed to limit kilobytes per second. -asu --alt-speed-uplimit limit Limit the alternate upload speed to limit kilobytes per second. -asc --alt-speed-scheduler Use the scheduled on/off times. -ASC --no-alt-speed-scheduler Don't use the scheduled on/off days and times. --alt-speed-time-begin time Time to start using the alt speed limits (in hhmm). --alt-speed-time-end time Time to stop using the alt speed limits (in hhmm). --alt-speed-days days Set the number of days on which to enable the speed scheduler, using a list such as "2,4-6". --torrent-done-script filename Specify a file to run each time a torrent finishes --no-torrent-done-script Don't run any script when a torrent finishes -c --incomplete-dir dir When adding new torrents, store their contents in directory until the torrent is done. -C --no-incomplete-dir Don't store incomplete torrents in a different directory. -d --downlimit limit Limit the maximum download speed to limit kB/s. If current torrent(s) are selected this operates on them. Otherwise, it changes the global setting. -D --no-downlimit Disable download speed limits. If current torrent(s) are selected this operates on them. Otherwise, it changes the global setting. -e --cache size Set the session's maximum memory cache size in MiB. This cache is used to reduce disk IO. -er --encryption-required Encrypt all peer connections. -ep --encryption-preferred Prefer encrypted peer connections. -et --encryption-tolerated Prefer unencrypted peer connections. --exit Tell the Transmission to initiate a shutdown. -f --files Get a file list for the current torrent(s) -g --get all | file-index | files Mark file(s) for download. all marks all all of the torrent's files for downloading, file-index adds a single file to the download list, and files adds multiple files to the download list, such as "-g1,3-5" to add files #1, #3, #4, and #5 to the download list. -G --no-get all | file-index | files Mark file(s) for not downloading. -gsr --global-seedratio ratio All torrents, unless overridden by a per-torrent setting, should seed until a specific ratio -GSR --no-global-seedratio All torrents, unless overridden by a per-torrent setting, should seed regardless of ratio -h --help Print command-line option descriptions. -i --info id | torrent-hash Show details of the current torrent(s) -si --session-info List session information from the server -st --session-stats List statistical information from the server -l --list List all torrents -m --portmap Enable portmapping via NAT-PMP or UPnP -M --no-portmap Disable portmapping -n --auth username:password Set the username and password for authentication -ne --authenv Set the authentication information from the TR_AUTH environment variable which must be formatted as username:password. -N --netrc filename Set the authentication information from a netrc file. See netrc(5) for more information. -o --dht Enable distributed hash table (DHT). -O --no-dht Disable distribued hash table (DHT). -p --port port Set the port for use when listening for incoming peer connections -Bh --bandwidth-high Give this torrent first chance at available bandwidth -Bn --bandwidth-normal Give this torrent the bandwidth left over by high priority torrents -Bl --bandwidth-low Give this torrent the bandwidth left over by high and normal priority torrents -ph --priority-high all | file-index | files Try to download the specified file(s) first. all marks all of the torrent's files as normal priority, file-index sets a single file's priority as normal, and files sets multiple files' priorities as normal, such as "-pn1,3-5" to normalize files #1, #3, #4, and #5. -pn --priority-normal all | file-index | files Try to download the specified files normally. -pl --priority-low all | file-index | files Try to download the specified files last -pr --peers number Set the maximum number of peers. If current torrent(s) are selected this operates on them. Otherwise, it changes the global setting. -r --remove Remove the current torrent(s). This does not delete the downloaded data. --remove-and-delete Remove the current torrent(s) and delete their downloaded data. --reannounce Reannounce the current torrent(s). This is the same as the GUI's "ask tracker for more peers" button. --move Move the current torrents' data from their current locations to the specified directory. --find Tell Transmission where to look for the current torrents' data. -sr --seedratio ratio Let the current torrent(s) seed until a specific ratio -SR --no-seedratio Let the current torrent(s) seed regardless of ratio -srd --seedratio-default Let the current torrent(s) use the global seedratio settings -td --tracker-add tracker Add a tracker to a torrent -tr --tracker-remove trackerId Remove a tracker from a torrent -s --start Start the current torrent(s) -S --stop Stop the current torrent(s) from downloading or seeding --start-paused Start added torrents paused --no-start-paused Start added torrents unpaused -t --torrent all | id | torrent-hash Set the current torrent(s) for use by subsequent options. all will apply following requests to all torrents, while specific torrents can be chosen by id or hash. To set more than one current torrent, join their ids together in a list, such as "-t2,4,6-8" to operate on the torrents whose IDs are 2, 4, 6, 7, and 8. --trash-torrent Delete torrents after adding --no-trash-torrent Do not delete torrents after adding -hl --honor-session Make the current torrent(s) honor the session limits. -HL --no-honor-session Make the current torrent(s) not honor the session limits. -u --uplimit limit Limit the maximum upload speed to limit kB/s. If current torrent(s) are selected this operates on them. Otherwise, it changes the global setting. -U --no-uplimit Disable upload speed limits. --utp Enable uTP for peer connections. --no-utp Disable uTP for peer connections. If current torrent(s) are selected this operates on them. Otherwise, it changes the global setting. -v --verify Verify the current torrent(s) -V --version Show version number and exit -w --download-dir directory Use directory as the default location for newly added torrents to download files to. -x --pex Enable peer exchange (PEX). -X --no-pex Disable peer exchange (PEX). -y --lds Enable local peer discovery (LPD). -Y --no-lds Disable local peer discovery (LPD). -pi --peer-info List the current torrent's connected peers. In the `status' section of the list, the following shorthand is used: D: Downloading from this peer d: We would download from this peer if they would let us E: Encrypted connection H: Peer was found through DHT I: Peer is an incoming connection K: Peer has unchoked us, but we're not interested O: Optimistic unchoked T: Peer is connected over uTP U: Uploading to peer u: We would upload to this peer if they asked X: Peer was discovered through Peer Exchange (PEX) ?: We unchoked this peer, but they're not interested
Set download and upload limits to 400 kB/sec and 60 kB/sec: $ transmission-remote -d400 -u60 $ transmission-remote --downlimit=400 --uplimit=60 Set alternate download and upload limits to 100 kB/sec and 20 kB/sec: $ transmission-remote -asd100 -asu20 $ transmission-remote --alt-speed-downlimit=100 --alt-speed-uplimit=20 Set the scheduler to use the alternate speed limits on weekdays between 10AM and 11PM $ transmission-remote --alt-speed-time-begin=1000 $ transmission-remote --alt-speed-time-end=2300 $ transmission-remote --alt-speed-days=1-5 $ transmission-remote --alt-speed-scheduler List all torrents' IDs and states: $ transmission-remote -l List all torrents from a remote session that requires authentication: $ transmission-remote host:9091 --auth=username:password -l Start all torrents: $ transmission-remote -tall --start Add two torrents: $ transmission-remote -a one.torrent two.torrent Add all torrents in ~/Desktop: $ transmission-remote -a ~/Desktop/*torrent Get detailed information on the torrent whose ID is '1': $ transmission-remote -t1 -i Get a list of a torrent's files: $ transmission-remote -t1 -f Download only its second and fourth files: $ transmission-remote -t1 -Gall -g2,4 Set all torrents' first two files' priorities to high: $ transmission-remote -tall -ph1,2 Set all torrents' files' priorities to normal: $ transmission-remote -tall -pnall
http_proxy Sets the proxy to use for http tracker announces.
Jordan Lee, Josh Elsasser, Eric Petit, and Mitchell Livingston.