Provided by: zip_3.0-4_i386 bug

NAME

       zip - package and compress (archive) files

SYNOPSIS

       zip  [-aABcdDeEfFghjklLmoqrRSTuvVwXyz!@$] [--longoption ...]  [-b path]
       [-n suffixes] [-t date] [-tt date] [zipfile [file ...]]  [-xi list]

       zipcloak (see separate man page)

       zipnote (see separate man page)

       zipsplit (see separate man page)

       Note:  Command line processing in zip has been changed to support  long
       options  and  handle all options and arguments more consistently.  Some
       old command lines that depend on command line  inconsistencies  may  no
       longer work.

DESCRIPTION

       zip  is  a compression and file packaging utility for Unix, VMS, MSDOS,
       OS/2, Windows 9x/NT/XP, Minix, Atari, Macintosh, Amiga, and Acorn  RISC
       OS.   It  is analogous to a combination of the Unix commands tar(1) and
       compress(1) and is compatible with PKZIP (Phil  Katz's  ZIP  for  MSDOS
       systems).

       A  companion  program  (unzip(1))  unpacks  zip  archives.  The zip and
       unzip(1) programs can work with archives produced by PKZIP  (supporting
       most PKZIP features up to PKZIP version 4.6), and PKZIP and PKUNZIP can
       work with archives produced  by  zip  (with  some  exceptions,  notably
       streamed  archives,  but  recent  changes  in the zip file standard may
       facilitate better compatibility).  zip version 3.0 is  compatible  with
       PKZIP  2.04  and  also supports the Zip64 extensions of PKZIP 4.5 which
       allow archives as well as files to exceed the previous 2 GB limit (4 GB
       in  some  cases).  zip also now supports bzip2 compression if the bzip2
       library is included when zip  is  compiled.   Note  that  PKUNZIP  1.10
       cannot  extract  files  produced by PKZIP 2.04 or zip 3.0. You must use
       PKUNZIP 2.04g or unzip 5.0p1 (or later versions) to extract them.

       See the EXAMPLES section at the bottom of this  page  for  examples  of
       some typical uses of zip.

       Large Archives and Zip64.   zip automatically uses the Zip64 extensions
       when files larger than 4  GB  are  added  to  an  archive,  an  archive
       containing  Zip64  entries  is  updated (if the resulting archive still
       needs Zip64), the size of the archive will exceed 4  GB,  or  when  the
       number  of entries in the archive will exceed about 64K.  Zip64 is also
       used for archives streamed from standard input  as  the  size  of  such
       archives  are  not known in advance, but the option -fz- can be used to
       force zip to create PKZIP 2  compatible  archives  (as  long  as  Zip64
       extensions are not needed).  You must use a PKZIP 4.5 compatible unzip,
       such  as  unzip 6.0  or  later,  to  extract  files  using  the   Zip64
       extensions.

       In   addition,  streamed  archives,  entries  encrypted  with  standard
       encryption, or split archives created with the pause option may not  be
       compatible  with  PKZIP  as  data descriptors are used and PKZIP at the
       time of this writing does not  support  data  descriptors  (but  recent
       changes  in  the PKWare published zip standard now include some support
       for the data descriptor format zip uses).

       Mac OS X.  Though previous Mac versions had their  own  zip  port,  zip
       supports  Mac  OS  X  as  part  of the Unix port and most Unix features
       apply.  References to "MacOS" below generally refer to  MacOS  versions
       older than OS X.  Support for some Mac OS features in the Unix Mac OS X
       port, such as resource forks, is expected in the next zip release.

       For a brief help on zip and unzip,  run  each  without  specifying  any
       parameters on the command line.

USE

       The  program  is  useful for packaging a set of files for distribution;
       for  archiving  files;  and  for  saving  disk  space  by   temporarily
       compressing unused files or directories.

       The  zip  program  puts  one or more compressed files into a single zip
       archive, along with information about the files (name, path, date, time
       of  last modification, protection, and check information to verify file
       integrity).  An entire directory structure can be  packed  into  a  zip
       archive  with  a  single command.  Compression ratios of 2:1 to 3:1 are
       common for text files.  zip has one compression method (deflation)  and
       can  also store files without compression.  (If bzip2 support is added,
       zip can also compress using bzip2 compression, but such entries require
       a  reasonably  modern  unzip  to decompress.  When bzip2 compression is
       selected,  it  replaces  deflation  as  the   default   method.)    zip
       automatically  chooses the better of the two (deflation or store or, if
       bzip2 is selected, bzip2 or store) for each file to be compressed.

       Command format.  The basic command format is

              zip options archive inpath inpath ...

       where archive is a  new  or  existing  zip  archive  and  inpath  is  a
       directory  or file path optionally including wildcards.  When given the
       name of an existing zip archive, zip  will  replace  identically  named
       entries  in  the  zip archive (matching the relative names as stored in
       the archive) or add entries for new names.   For  example,  if  foo.zip
       exists  and  contains  foo/file1  and  foo/file2, and the directory foo
       contains the files foo/file1 and foo/file3, then:

              zip -r foo.zip foo

       or more concisely

              zip -r foo foo

       will replace foo/file1 in foo.zip and add foo/file3 to foo.zip.   After
       this,  foo.zip  contains  foo/file1,  foo/file2,  and  foo/file3,  with
       foo/file2 unchanged from before.

       So if before the zip command is executed foo.zip has:

               foo/file1 foo/file2

       and directory foo has:

               file1 file3

       then foo.zip will have:

               foo/file1 foo/file2 foo/file3

       where foo/file1 is replaced and foo/file3 is new.

       -@ file lists.  If a file list is specified as -@ [Not on  MacOS],  zip
       takes  the  list of input files from standard input instead of from the
       command line.  For example,

              zip -@ foo

       will store the files listed one per line on stdin in foo.zip.

       Under Unix, this option can be used to powerful effect  in  conjunction
       with  the  find (1)  command.  For example, to archive all the C source
       files in the current directory and its subdirectories:

              find . -name "*.[ch]" -print | zip source -@

       (note that the pattern must be quoted to keep the shell from  expanding
       it).

       Streaming input and output.   zip  will also accept a single dash ("-")
       as the zip file name, in which case it  will  write  the  zip  file  to
       standard  output,  allowing  the output to be piped to another program.
       For example:

              zip -r - . | dd of=/dev/nrst0 obs=16k

       would write the zip output directly to a tape with the specified  block
       size for the purpose of backing up the current directory.

       zip  also  accepts  a  single  dash  ("-")  as the name of a file to be
       compressed, in which case it will read the file  from  standard  input,
       allowing zip to take input from another program. For example:

              tar cf - . | zip backup -

       would compress the output of the tar command for the purpose of backing
       up the current directory. This generally  produces  better  compression
       than  the  previous  example  using  the -r option because zip can take
       advantage of redundancy between files. The backup can be restored using
       the command

              unzip -p backup | tar xf -

       When  no  zip file name is given and stdout is not a terminal, zip acts
       as a filter,  compressing  standard  input  to  standard  output.   For
       example,

              tar cf - . | zip | dd of=/dev/nrst0 obs=16k

       is equivalent to

              tar cf - . | zip - - | dd of=/dev/nrst0 obs=16k

       zip  archives  created in this manner can be extracted with the program
       funzip which is provided in the unzip package, or by  gunzip  which  is
       provided  in  the gzip package (but some gunzip may not support this if
       zip used the Zip64 extensions). For example:

              dd if=/dev/nrst0  ibs=16k | funzip | tar xvf -

       The stream can also be saved to a file and unzip used.

       If Zip64 support for large files and archives is  enabled  and  zip  is
       used as a filter, zip creates a Zip64 archive that requires a PKZIP 4.5
       or later compatible unzip to read it.  This is to avoid amgibuities  in
       the  zip  file structure as defined in the current zip standard (PKWARE
       AppNote) where the decision to use Zip64 needs to be made  before  data
       is  written for the entry, but for a stream the size of the data is not
       known at that point.  If the data is known to be smaller than 4 GB, the
       option -fz- can be used to prevent use of Zip64, but zip will exit with
       an error if Zip64 was in fact needed.  zip 3 and unzip 6 and later  can
       read  archives  with  Zip64  entries.   Also,  zip  removes  the  Zip64
       extensions if not needed when archive entries are copied  (see  the  -U
       (--copy) option).

       When directing the output to another file, note that all options should
       be before the redirection including -x.  For example:

              zip archive "*.h" "*.c" -x donotinclude.h orthis.h > tofile

       Zip files.  When changing an existing zip archive,  zip  will  write  a
       temporary file with the new contents, and only replace the old one when
       the process of creating the new  version  has  been  completed  without
       error.

       If  the  name  of  the  zip  archive does not contain an extension, the
       extension .zip is added. If the  name  already  contains  an  extension
       other  than  .zip,  the existing extension is kept unchanged.  However,
       split archives (archives split over multiple files)  require  the  .zip
       extension on the last split.

       Scanning and reading files.   When  zip  starts,  it scans for files to
       process (if needed).  If this scan takes longer than about  5  seconds,
       zip  will  display  a  "Scanning  files"  message  and start displaying
       progress dots every 2 seconds  or  every  so  many  entries  processed,
       whichever  takes  longer.  If there is more than 2 seconds between dots
       it could indicate that finding each file is taking time and could  mean
       a slow network connection for example.  (Actually the initial file scan
       is a two-step process where the directory scan is followed  by  a  sort
       and  these  two  steps  are  separated  with  a  space in the dots.  If
       updating an existing archive, a space also appears between the existing
       file  scan  and  the  new  file scan.)  The scanning files dots are not
       controlled by the -ds dot size option, but the dots are turned  off  by
       the -q quiet option.  The -sf show files option can be used to scan for
       files and get the list of files  scanned  without  actually  processing
       them.

       If  zip  is not able to read a file, it issues a warning but continues.
       See the -MM option below for more on how zip handles patterns that  are
       not  matched  and  files  that  are  not  readable.  If some files were
       skipped, a warning is issued at the end of the zip operation noting how
       many files were read and how many skipped.

       Command modes.   zip  now supports two distinct types of command modes,
       external and internal.  The external modes (add, update,  and  freshen)
       read  files  from the file system (as well as from an existing archive)
       while the internal modes  (delete  and  copy)  operate  exclusively  on
       entries in an existing archive.

       add
              Update  existing entries and add new files.  If the archive does
              not exist create it.  This is the default mode.

       update (-u)
              Update existing entries if newer on the file system and add  new
              files.   If the archive does not exist issue warning then create
              a new archive.

       freshen (-f)
              Update existing entries of an  archive  if  newer  on  the  file
              system.  Does not add new files to the archive.

       delete (-d)
              Select entries in an existing archive and delete them.

       copy (-U)
              Select  entries  in  an  existing archive and copy them to a new
              archive.  This new mode is similar to update  but  command  line
              patterns  select  entries  in  the  existing archive rather than
              files from the file system and it uses the --out option to write
              the  resulting  archive  to  a  new  file rather than update the
              existing archive, leaving the original archive unchanged.

       The new File Sync option (-FS) is also considered a new mode, though it
       is  similar  to  update.   This  mode synchronizes the archive with the
       files on the OS, only replacing files in the archive if the  file  time
       or  size  of  the  OS file is different, adding new files, and deleting
       entries from the archive where there is no matching file.  As this mode
       can  delete  entries from the archive, consider making a backup copy of
       the archive.

       Also see -DF for creating difference archives.

       See each option description below for details and the EXAMPLES  section
       below for examples.

       Split archives.   zip  version 3.0 and later can create split archives.
       A split archive is a standard zip archive split  over  multiple  files.
       (Note  that split archives are not just archives split in to pieces, as
       the offsets of entries are now  based  on  the  start  of  each  split.
       Concatenating  the  pieces  together will invalidate these offsets, but
       unzip can usually deal with it.  zip will  usually  refuse  to  process
       such  a  spliced  archive  unless the -FF fix option is used to fix the
       offsets.)

       One use of split archives  is  storing  a  large  archive  on  multiple
       removable media.  For a split archive with 20 split files the files are
       typically named  (replace  ARCHIVE  with  the  name  of  your  archive)
       ARCHIVE.z01, ARCHIVE.z02, ..., ARCHIVE.z19, ARCHIVE.zip.  Note that the
       last file is the .zip file.  In  contrast,  spanned  archives  are  the
       original  multi-disk archive generally requiring floppy disks and using
       volume labels to store disk numbers.  zip supports split  archives  but
       not  spanned  archives,  though a procedure exists for converting split
       archives of the right size to spanned archives.  The  reverse  is  also
       true,  where  each  file of a spanned archive can be copied in order to
       files with the above names to create a split archive.

       Use -s to set the split size and create a split archive.  The  size  is
       given as a number followed optionally by one of k (kB), m (MB), g (GB),
       or t (TB) (the default is m).  The -sp option can be used to pause  zip
       between splits to allow changing removable media, for example, but read
       the descriptions and warnings for both -s and -sp below.

       Though zip does not update split archives, zip provides the new  option
       -O  (--output-file  or --out) to allow split archives to be updated and
       saved in a new archive.  For example,

              zip inarchive.zip foo.c bar.c --out outarchive.zip

       reads archive inarchive.zip, even if split, adds the  files  foo.c  and
       bar.c,   and  writes  the  resulting  archive  to  outarchive.zip.   If
       inarchive.zip is split then outarchive.zip defaults to the  same  split
       size.   Be  aware  that  if outarchive.zip and any split files that are
       created with it already exist, these are always overwritten  as  needed
       without warning.  This may be changed in the future.

       Unicode.   Though the zip standard requires storing paths in an archive
       using a specific character set, in practice zips have stored  paths  in
       archives in whatever the local character set is.  This creates problems
       when an archive is created or updated on a system using  one  character
       set  and  then  extracted on another system using a different character
       set.  When compiled with Unicode  support  enabled  on  platforms  that
       support  wide  characters,  zip now stores, in addition to the standard
       local path for backward compatibility, the  UTF-8  translation  of  the
       path.  This provides a common universal character set for storing paths
       that allows these paths to be fully extracted  on  other  systems  that
       support  Unicode  and  to  match  as  close as possible on systems that
       don't.

       On Win32 systems where paths  are  internally  stored  as  Unicode  but
       represented  in  the local character set, it's possible that some paths
       will be skipped during a local character set directory scan.  zip  with
       Unicode  support  now can read and store these paths.  Note that Win 9x
       systems and FAT file systems don't fully support Unicode.

       Be aware that console windows on Win32 and Unix, for example, sometimes
       don't  accurately  show all characters due to how each operating system
       switches in character sets for display.  However, directory  navigation
       tools should show the correct paths if the needed fonts are loaded.

       Command  line  format.   This  version  of zip has updated command line
       processing and support for long options.

       Short options take the form

              -s[-][s[-]...][value][=value][ value]

       where s is a one or two character short option.  A  short  option  that
       takes  a value is last in an argument and anything after it is taken as
       the value.  If the option can be negated and  "-"  immediately  follows
       the  option, the option is negated.  Short options can also be given as
       separate arguments

              -s[-][value][=value][ value] -s[-][value][=value][ value] ...

       Short options in general  take  values  either  as  part  of  the  same
       argument  or  as  the  following  argument.   An  optional  =  is  also
       supported.  So

              -ttmmddyyyy

       and

              -tt=mmddyyyy

       and

              -tt mmddyyyy

       all work.  The -x and -i options accept  lists  of  values  and  use  a
       slightly different format described below.  See the -x and -i options.

       Long options take the form

              --longoption[-][=value][ value]

       where the option starts with --, has a multicharacter name, can include
       a trailing dash to negate the option (if the option supports  it),  and
       can have a value (option argument) specified by preceding it with = (no
       spaces).  Values can also follow the argument.  So

              --before-date=mmddyyyy

       and

              --before-date mmddyyyy

       both work.

       Long option names can be shortened to the shortest unique abbreviation.
       See  the  option descriptions below for which support long options.  To
       avoid confusion, avoid abbreviating a negatable option with an embedded
       dash  ("-")  at  the  dash  if  you plan to negate it (the parser would
       consider a trailing dash, such as for the  option  --some-option  using
       --some-  as  the  option,  as  part  of the name rather than a negating
       dash).  This may be changed to force the last dash  in  --some-  to  be
       negating in the future.

OPTIONS

       -a
       --ascii
              [Systems using EBCDIC] Translate file to ASCII format.

       -A
       --adjust-sfx
              Adjust  self-extracting  executable  archive.  A self-extracting
              executable archive is created by prepending the SFX stub  to  an
              existing  archive.  The  -A option tells zip to adjust the entry
              offsets  stored  in  the  archive  to  take  into  account  this
              "preamble" data.

       Note:  self-extracting  archives  for the Amiga are a special case.  At
       present, only the Amiga port of zip is capable of adjusting or updating
       these without corrupting them. -J can be used to remove the SFX stub if
       other updates need to be made.

       -AC
       --archive-clear
              [WIN32]  Once archive is created (and  tested  if  -T  is  used,
              which   is   recommended),  clear  the  archive  bits  of  files
              processed.  WARNING: Once the bits are cleared they are cleared.
              You  may want to use the -sf show files option to store the list
              of files  processed  in  case  the  archive  operation  must  be
              repeated.   Also  consider  using the -MM must match option.  Be
              sure to check out -DF as a possibly better way to do incremental
              backups.

       -AS
       --archive-set
              [WIN32]   Only  include  files  that  have  the archive bit set.
              Directories are not stored when -AS is used, though  by  default
              the paths of entries, including directories, are stored as usual
              and can be used by most unzips to recreate directories.

              The archive bit is set by the operating system when  a  file  is
              modified  and,  if used with -AC, -AS can provide an incremental
              backup capability.  However, other applications can  modify  the
              archive  bit  and  it  may  not be a reliable indicator of which
              files  have  changed   since   the   last   archive   operation.
              Alternative  ways  to create incremental backups are using -t to
              use file dates, though this won't  catch  old  files  copied  to
              directories  being  archived,  and  -DF to create a differential
              archive.

       -B
       --binary
              [VM/CMS and MVS] force file to be read binary (default is text).

       -Bn    [TANDEM] set Edit/Enscribe formatting options with n defined as
              bit  0: Don't add delimiter (Edit/Enscribe)
              bit  1: Use LF rather than CR/LF as delimiter (Edit/Enscribe)
              bit  2: Space fill record to maximum record length (Enscribe)
              bit  3: Trim trailing space (Enscribe)
              bit  8: Force 30K (Expand) large read for unstructured files

       -b path
       --temp-path path
              Use the specified  path  for  the  temporary  zip  archive.  For
              example:

                     zip -b /tmp stuff *

              will  put  the  temporary  zip  archive  in  the directory /tmp,
              copying over stuff.zip to the current directory when done.  This
              option  is useful when updating an existing archive and the file
              system containing this old archive does not have enough space to
              hold both old and new archives at the same time.  It may also be
              useful when streaming in some cases to avoid the need  for  data
              descriptors.   Note  that using this option may require zip take
              additional time to copy  the  archive  file  when  done  to  the
              destination file system.

       -c
       --entry-comments
              Add  one-line  comments for each file.  File operations (adding,
              updating) are done first, and the user is then  prompted  for  a
              one-line  comment  for each file.  Enter the comment followed by
              return, or just return for no comment.

       -C
       --preserve-case
              [VMS]  Preserve case all on VMS.   Negating  this  option  (-C-)
              downcases.

       -C2
       --preserve-case-2
              [VMS]   Preserve  case ODS2 on VMS.  Negating this option (-C2-)
              downcases.

       -C5
       --preserve-case-5
              [VMS]  Preserve case ODS5 on VMS.  Negating this  option  (-C5-)
              downcases.

       -d
       --delete
              Remove (delete) entries from a zip archive.  For example:

                     zip -d foo foo/tom/junk foo/harry/\* \*.o

              will  remove the entry foo/tom/junk, all of the files that start
              with foo/harry/, and all of the files that end with .o  (in  any
              path).   Note  that  shell pathname expansion has been inhibited
              with backslashes, so that zip can see  the  asterisks,  enabling
              zip  to  match on the contents of the zip archive instead of the
              contents of the current directory.   (The  backslashes  are  not
              used  on  MSDOS-based platforms.)  Can also use quotes to escape
              the asterisks as in

                     zip -d foo foo/tom/junk "foo/harry/*" "*.o"

              Not escaping the asterisks on a system where the  shell  expands
              wildcards  could  result  in  the asterisks being converted to a
              list of files in the current directory and  that  list  used  to
              delete entries from the archive.

              Under  MSDOS,  -d is case sensitive when it matches names in the
              zip archive.  This requires that file names be entered in  upper
              case  if  they  were  zipped  by  PKZIP on an MSDOS system.  (We
              considered making this case insensitive on systems  where  paths
              were  case insensitive, but it is possible the archive came from
              a system where case does matter and the  archive  could  include
              both Bar and bar as separate files in the archive.)  But see the
              new option -ic to ignore case in the archive.

       -db
       --display-bytes
              Display running byte counts showing the  bytes  zipped  and  the
              bytes to go.

       -dc
       --display-counts
              Display running count of entries zipped and entries to go.

       -dd
       --display-dots
              Display  dots  while  each entry is zipped (except on ports that
              have their own progress indicator).  See -ds below  for  setting
              dot  size.   The  default  is  a  dot  every 10 MB of input file
              processed.  The -v option also displays dots  (previously  at  a
              much  higher  rate  than this but now -v also defaults to 10 MB)
              and this rate is also controlled by -ds.

       -df
       --datafork
              [MacOS] Include only data-fork of files zipped into the archive.
              Good   for   exporting   files   to  foreign  operating-systems.
              Resource-forks will be ignored at all.

       -dg
       --display-globaldots
              Display progress dots for the archive instead of for each  file.
              The command

                         zip -qdgds 10m

              will turn off most output except dots every 10 MB.

       -ds size
       --dot-size size
              Set  amount of input file processed for each dot displayed.  See
              -dd to enable displaying dots.  Setting this option implies -dd.
              Size  is  in  the  format  nm  where  n  is  a number and m is a
              multiplier.  Currently m can be k (KB), m (MB),  g  (GB),  or  t
              (TB), so if n is 100 and m is k, size would be 100k which is 100
              KB.  The default is 10 MB.

              The -v option also displays dots and now defaults to 10 MB also.
              This  rate is also controlled by this option.  A size of 0 turns
              dots off.

              This option does not control the dots from the "Scanning  files"
              message  as zip scans for input files.  The dot size for that is
              fixed at 2 seconds or a fixed number of  entries,  whichever  is
              longer.

       -du
       --display-usize
              Display the uncompressed size of each entry.

       -dv
       --display-volume
              Display  the volume (disk) number each entry is being read from,
              if reading an existing archive, and being written to.

       -D
       --no-dir-entries
              Do not create  entries  in  the  zip  archive  for  directories.
              Directory   entries   are  created  by  default  so  that  their
              attributes can be saved in the  zip  archive.   The  environment
              variable  ZIPOPT  can be used to change the default options. For
              example under Unix with sh:

                     ZIPOPT="-D"; export ZIPOPT

              (The variable ZIPOPT can be used for any  option,  including  -i
              and -x using a new option format detailed below, and can include
              several options.) The option -D is a shorthand for -x  "*/"  but
              the  latter previously could not be set as default in the ZIPOPT
              environment variable as the contents  of  ZIPOPT  gets  inserted
              near  the beginning of the command line and the file list had to
              end at the end of the line.

              This version of zip does allow -x and -i options  in  ZIPOPT  if
              the form

               -x file file ... @

              is used, where the @ (an argument that is just @) terminates the
              list.

       -DF
       --difference-archive
              Create an archive that contains all new and changed files  since
              the  original  archive was created.  For this to work, the input
              file list and current directory must be the same as  during  the
              original zip operation.

              For example, if the existing archive was created using

                     zip -r foofull .

              from the bar directory, then the command

                     zip -r foofull . -DF --out foonew

              also from the bar directory creates the archive foonew with just
              the files not in foofull and the files where the  size  or  file
              time of the files do not match those in foofull.

              Note  that  the  timezone  environment variable TZ should be set
              according to the local timezone in order for this option to work
              correctly.   A change in timezone since the original archive was
              created could result in no times matching and  all  files  being
              included.

              A possible approach to backing up a directory might be to create
              a normal archive of the contents of  the  directory  as  a  full
              backup, then use this option to create incremental backups.

       -e
       --encrypt
              Encrypt  the  contents of the zip archive using a password which
              is entered on the terminal in response to a  prompt  (this  will
              not  be  echoed;  if  standard error is not a tty, zip will exit
              with an error).  The password prompt is  repeated  to  save  the
              user from typing errors.

       -E
       --longnames
              [OS/2]  Use  the  .LONGNAME  Extended  Attribute  (if  found) as
              filename.

       -f
       --freshen
              Replace (freshen) an existing entry in the zip archive  only  if
              it  has  been modified more recently than the version already in
              the zip archive; unlike the update option (-u) this will not add
              files that are not already in the zip archive.  For example:

                     zip -f foo

              This  command  should  be run from the same directory from which
              the original zip command was run,  since  paths  stored  in  zip
              archives are always relative.

              Note  that  the  timezone  environment variable TZ should be set
              according to the local timezone in order for the -f, -u  and  -o
              options to work correctly.

              The  reasons behind this are somewhat subtle but have to do with
              the differences between the Unix-format file  times  (always  in
              GMT) and most of the other operating systems (always local time)
              and the necessity to compare the two.  A  typical  TZ  value  is
              ``MET-1MEST''  (Middle  European  time with automatic adjustment
              for ``summertime'' or Daylight Savings Time).

              The format is TTThhDDD, where TTT is the time zone such as  MET,
              hh  is  the  difference  between  GMT  and local time such as -1
              above, and DDD is the time zone when daylight savings time is in
              effect.  Leave off the DDD if there is no daylight savings time.
              For the US Eastern time zone EST5EDT.

       -F
       --fix
       -FF
       --fixfix
              Fix the zip archive. The -F option can be used if some  portions
              of  the  archive  are  missing, but requires a reasonably intact
              central directory.  The input archive is scanned as  usual,  but
              zip  will ignore some problems.  The resulting archive should be
              valid, but any inconsistent entries will be left out.

              When doubled  as  in  -FF,  the  archive  is  scanned  from  the
              beginning  and  zip scans for special signatures to identify the
              limits between the  archive  members.  The  single  -F  is  more
              reliable  if  the  archive  is not too much damaged, so try this
              option first.

              If the archive is too damaged or the end has been truncated, you
              must  use  -FF.   This  is  a change from zip 2.32, where the -F
              option is able to read a truncated archive.  The -F  option  now
              more  reliably  fixes  archives  with  minor  damage and the -FF
              option is needed to  fix  archives  where  -F  might  have  been
              sufficient before.

              Neither  option will recover archives that have been incorrectly
              transferred in ascii mode instead of binary. After  the  repair,
              the  -t option of unzip may show that some files have a bad CRC.
              Such files cannot be recovered; you can  remove  them  from  the
              archive using the -d option of zip.

              Note  that  -FF may have trouble fixing archives that include an
              embedded zip archive that was stored  (without  compression)  in
              the  archive  and,  depending  on  the  damage,  it may find the
              entries in the embedded archive rather than the archive  itself.
              Try -F first as it does not have this problem.

              The  format  of  the fix commands have changed.  For example, to
              fix the damaged archive foo.zip,

                     zip -F foo --out foofix

              tries to read the entries normally, copying good entries to  the
              new  archive  foofix.zip.   If  this  doesn't  work, as when the
              archive is truncated, or if some entries you  know  are  in  the
              archive are missed, then try

                     zip -FF foo --out foofixfix

              and  compare the resulting archive to the archive created by -F.
              The -FF option may create an inconsistent archive.  Depending on
              what  is  damaged,  you  can  then use the -F option to fix that
              archive.

              A split archive with missing split files can be fixed  using  -F
              if  you  have the last split of the archive (the .zip file).  If
              this file is missing, you must use -FF to fix the archive, which
              will prompt you for the splits you have.

              Currently  the fix options can't recover entries that have a bad
              checksum or are otherwise damaged.

       -FI
       --fifo [Unix]  Normally zip  skips  reading  any  FIFOs  (named  pipes)
              encountered, as zip can hang if the FIFO is not being fed.  This
              option tells zip to read the contents of any FIFO it finds.

       -FS
       --filesync
              Synchronize the contents of an archive with the files on the OS.
              Normally  when  an  archive  is updated, new files are added and
              changed files are updated but files that no longer exist on  the
              OS  are not deleted from the archive.  This option enables a new
              mode that checks entries in the archive against the file system.
              If  the file time and file size of the entry matches that of the
              OS file, the entry is copied from the  old  archive  instead  of
              being  read from the file system and compressed.  If the OS file
              has changed, the entry is read and compressed as usual.  If  the
              entry  in the archive does not match a file on the OS, the entry
              is deleted.  Enabling this option should  create  archives  that
              are  the  same  as  new archives, but since existing entries are
              copied instead of compressed, updating an existing archive  with
              -FS  can  be  much  faster  than  creating  a new archive.  Also
              consider using -u for updating an archive.

              For this option to work, the archive should be updated from  the
              same  directory  it  was created in so the relative paths match.
              If few files are being copied from the old archive,  it  may  be
              faster to create a new archive instead.

              Note  that  the  timezone  environment variable TZ should be set
              according to the local timezone in order for this option to work
              correctly.   A change in timezone since the original archive was
              created could result in no times matching and  recompression  of
              all files.

              This  option  deletes  files  from  the archive.  If you need to
              preserve the original archive, make a copy of the archive  first
              or  use  the --out option to output the updated archive to a new
              file.  Even though it may be slower, creating a new archive with
              a  new  archive name is safer, avoids mismatches between archive
              and OS paths, and is preferred.

       -g
       --grow
              Grow (append to) the specified zip archive, instead of  creating
              a  new one. If this operation fails, zip attempts to restore the
              archive to its original state. If  the  restoration  fails,  the
              archive  might  become  corrupted.  This  option is ignored when
              there's no existing archive or when at least one archive  member
              must be updated or deleted.

       -h
       -?
       --help
              Display  the  zip  help information (this also appears if zip is
              run with no arguments).

       -h2
       --more-help
              Display extended help including more  on  command  line  format,
              pattern matching, and more obscure options.

       -i files
       --include files
              Include only the specified files, as in:

                     zip -r foo . -i \*.c

              which  will include only the files that end in .c in the current
              directory and its subdirectories. (Note  for  PKZIP  users:  the
              equivalent command is

                     pkzip -rP foo *.c

              PKZIP  does  not  allow  recursion in directories other than the
              current  one.)   The  backslash  avoids   the   shell   filename
              substitution,  so  that the name matching is performed by zip at
              all directory levels.  [This is for Unix and other systems where
              \   escapes  the  next  character.   For other systems where the
              shell does not process * do not use \ and the above is

                     zip -r foo . -i *.c

              Examples are  for  Unix  unless  otherwise  specified.]   So  to
              include  dir,  a directory directly under the current directory,
              use

                     zip -r foo . -i dir/\*

              or

                     zip -r foo . -i "dir/*"

              to match paths such as dir/a and dir/b/file.c [on ports  without
              wildcard expansion in the shell such as MSDOS and Windows

                     zip -r foo . -i dir/*

              is  used.]   Note  that  currently  the trailing / is needed for
              directories (as in

                     zip -r foo . -i dir/

              to include directory dir).

              The long option form of the first example is

                     zip -r foo . --include \*.c

              and does the same thing as the short option form.

              Though the command syntax used to require -i at the end  of  the
              command  line,  this  version  actually allows -i (or --include)
              anywhere.  The list of files terminates  at  the  next  argument
              starting  with  -,  the  end  of  the  command line, or the list
              terminator @ (an argument that is just @).  So the above can  be
              given as

                     zip -i \*.c @ -r foo .

              for  example.   There must be a space between the option and the
              first file of a list.  For just one file you can use the  single
              value form

                     zip -i\*.c -r foo .

              (no space between option and value) or

                     zip --include=\*.c -r foo .

              as   additional  examples.   The  single  value  forms  are  not
              recommended because they can be confusing  and,  in  particular,
              the -ifile format can cause problems if the first letter of file
              combines with i to form a two-letter  option  starting  with  i.
              Use -sc to see how your command line will be parsed.

              Also possible:

                     zip -r foo  . -i@include.lst

              which  will  only include the files in the current directory and
              its  subdirectories  that  match  the  patterns  in   the   file
              include.lst.

              Files to -i and -x are patterns matching internal archive paths.
              See -R for more on patterns.

       -I
       --no-image
              [Acorn RISC OS] Don't scan through Image files.  When used,  zip
              will  not  consider  Image  files  (eg.  DOS partitions or Spark
              archives when SparkFS is loaded) as directories but  will  store
              them as single files.

              For example, if you have SparkFS loaded, zipping a Spark archive
              will result  in  a  zipfile  containing  a  directory  (and  its
              content)  while  using  the  'I' option will result in a zipfile
              containing a Spark archive. Obviously this second case will also
              be obtained (without the 'I' option) if SparkFS isn't loaded.

       -ic
       --ignore-case
              [VMS,  WIN32]  Ignore  case when matching archive entries.  This
              option is only available on systems where the case of  files  is
              ignored.  On systems with case-insensitive file systems, case is
              normally ignored when matching files on the file system  but  is
              not  ignored  for  -f  (freshen),  -d  (delete),  -U (copy), and
              similar modes when matching against archive  entries  (currently
              -f  ignores  case  on  VMS)  because archive entries can be from
              systems where case does matter  and  names  that  are  the  same
              except  for  case can exist in an archive.  The -ic option makes
              all matching case insensitive.   This  can  result  in  multiple
              archive entries matching a command line pattern.

       -j
       --junk-paths
              Store  just the name of a saved file (junk the path), and do not
              store directory names. By default, zip will store the full  path
              (relative to the current directory).

       -jj
       --absolute-path
              [MacOS] record Fullpath (+ Volname). The complete path including
              volume will be stored. By default  the  relative  path  will  be
              stored.

       -J
       --junk-sfx
              Strip any prepended data (e.g. a SFX stub) from the archive.

       -k
       --DOS-names
              Attempt  to  convert  the  names  and paths to conform to MSDOS,
              store only the MSDOS attribute (just the  user  write  attribute
              from  Unix), and mark the entry as made under MSDOS (even though
              it was not); for compatibility with PKUNZIP  under  MSDOS  which
              cannot handle certain names such as those with two dots.

       -l
       --to-crlf
              Translate  the  Unix  end-of-line  character  LF  into the MSDOS
              convention CR LF. This option  should  not  be  used  on  binary
              files.   This  option  can  be  used  on Unix if the zip file is
              intended for PKUNZIP under MSDOS. If  the  input  files  already
              contain  CR  LF, this option adds an extra CR. This is to ensure
              that unzip -a on Unix  will  get  back  an  exact  copy  of  the
              original  file,  to  undo the effect of zip -l.  See -ll for how
              binary files are handled.

       -la
       --log-append
              Append to existing logfile.  Default is to overwrite.

       -lf logfilepath
       --logfile-path logfilepath
              Open a logfile at the given path.  By default any existing  file
              at  that location is overwritten, but the -la option will result
              in an existing file being opened and  the  new  log  information
              appended  to any existing information.  Only warnings and errors
              are written to the log unless the -li option is also given, then
              all information messages are also written to the log.

       -li
       --log-info
              Include  information  messages, such as file names being zipped,
              in the log.  The default is to only include  the  command  line,
              any warnings and errors, and the final status.

       -ll
       --from-crlf
              Translate the MSDOS end-of-line CR LF into Unix LF.  This option
              should not be used on binary files.  This option can be used  on
              MSDOS  if the zip file is intended for unzip under Unix.  If the
              file is converted and the file is later determined to be  binary
              a warning is issued and the file is probably corrupted.  In this
              release if -ll detects binary in the first buffer  read  from  a
              file,  zip now issues a warning and skips line end conversion on
              the file.  This check seems to catch all  binary  files  tested,
              but  the original check remains and if a converted file is later
              determined to be binary that warning is  still  issued.   A  new
              algorithm  is  now  being  used for binary detection that should
              allow line end conversion of text files  in  UTF-8  and  similar
              encodings.

       -L
       --license
              Display the zip license.

       -m
       --move
              Move  the  specified  files into the zip archive; actually, this
              deletes the target directories/files after making the  specified
              zip  archive.  If a directory becomes empty after removal of the
              files, the directory is also  removed.  No  deletions  are  done
              until zip has created the archive without error.  This is useful
              for conserving disk space, but is potentially dangerous so it is
              recommended to use it in combination with -T to test the archive
              before removing all input files.

       -MM
       --must-match
              All input patterns must match at least one file  and  all  input
              files  found  must  be readable.  Normally when an input pattern
              does not match a file the "name not matched" warning  is  issued
              and  when  an  input file has been found but later is missing or
              not readable a missing or not readable warning  is  issued.   In
              either  case zip continues creating the archive, with missing or
              unreadable new files being skipped  and  files  already  in  the
              archive  remaining  unchanged.  After the archive is created, if
              any files were not readable zip returns the OPEN error code  (18
              on most systems) instead of the normal success return (0 on most
              systems).  With -MM set, zip exits as soon as an  input  pattern
              is not matched (whenever the "name not matched" warning would be
              issued) or when an input file is not readable.  In  either  case
              zip exits with an OPEN error and no archive is created.

              This option is useful when a known list of files is to be zipped
              so any missing or unreadable files will result in an error.   It
              is less useful when used with wildcards, but zip will still exit
              with an error if any input pattern doesn't match  at  least  one
              file  and  if  any matched files are unreadable.  If you want to
              create the archive anyway and only need to know  if  files  were
              skipped, don't use -MM and just check the return code.  Also -lf
              could be useful.

       -n suffixes
       --suffixes suffixes
              Do not attempt to compress files named with the given  suffixes.
              Such  files are simply stored (0% compression) in the output zip
              file, so that zip doesn't waste  its  time  trying  to  compress
              them.    The   suffixes   are  separated  by  either  colons  or
              semicolons.  For example:

                     zip -rn .Z:.zip:.tiff:.gif:.snd  foo foo

              will copy everything from foo into foo.zip, but will  store  any
              files  that end in .Z, .zip, .tiff, .gif, or .snd without trying
              to compress them (image and sound files  often  have  their  own
              specialized  compression  methods).   By  default,  zip does not
              compress    files    with     extensions     in     the     list
              .Z:.zip:.zoo:.arc:.lzh:.arj.   Such files are stored directly in
              the output archive.  The environment variable ZIPOPT can be used
              to change the default options. For example under Unix with csh:

                     setenv ZIPOPT "-n .gif:.zip"

              To attempt compression on all files, use:

                     zip -n : foo

              The  maximum  compression option -9 also attempts compression on
              all files regardless of extension.

              On Acorn RISC OS systems the suffixes are actually filetypes  (3
              hex  digit format). By default, zip does not compress files with
              filetypes in the list DDC:D96:68E (i.e. Archives, CFS files  and
              PackDir files).

       -nw
       --no-wild
              Do not perform internal wildcard processing (shell processing of
              wildcards is still done by the shell unless  the  arguments  are
              escaped).   Useful  if  a  list  of  paths  is being read and no
              wildcard substitution is desired.

       -N
       --notes
              [Amiga,  MacOS]  Save  Amiga  or  MacOS  filenotes  as   zipfile
              comments.  They can be restored by using the -N option of unzip.
              If -c is used also, you are prompted for comments only for those
              files that do not have filenotes.

       -o
       --latest-time
              Set  the  "last  modified" time of the zip archive to the latest
              (oldest) "last modified" time found among the entries in the zip
              archive.   This  can  be  used  without any other operations, if
              desired.  For example:

              zip -o foo

              will change the last modified time of foo.zip to the latest time
              of the entries in foo.zip.

       -O output-file
       --output-file output-file
              Process  the  archive  changes as usual, but instead of updating
              the existing archive, output the  new  archive  to  output-file.
              Useful  for  updating  an  archive without changing the existing
              archive and the input archive must be a different file than  the
              output archive.

              This  option  can  be used to create updated split archives.  It
              can also be used with  -U  to  copy  entries  from  an  existing
              archive to a new archive.  See the EXAMPLES section below.

              Another  use  is  converting  zip  files  from one split size to
              another.  For instance, to convert an archive  with  700  MB  CD
              splits to one with 2 GB DVD splits, can use:

                     zip -s 2g cd-split.zip --out dvd-split.zip

              which uses copy mode.  See -U below.  Also:

                     zip -s 0 split.zip --out unsplit.zip

              will convert a split archive to a single-file archive.

              Copy  mode  will  convert stream entries (using data descriptors
              and which should be  compatible  with  most  unzips)  to  normal
              entries  (which should be compatible with all unzips), except if
              standard encryption  was  used.   For  archives  with  encrypted
              entries,  zipcloak  will decrypt the entries and convert them to
              normal entries.

       -p
       --paths
              Include relative file paths as part of the names of files stored
              in  the  archive.  This is the default.  The -j option junks the
              paths and just stores the names of the files.

       -P password
       --password password
              Use password to encrypt  zipfile  entries  (if  any).   THIS  IS
              INSECURE!   Many  multi-user  operating systems provide ways for
              any user to see the current command line of any other user; even
              on  stand-alone  systems there is always the threat of over-the-
              shoulder peeking.  Storing the plaintext password as part  of  a
              command  line  in  an  automated script is even worse.  Whenever
              possible, use  the  non-echoing,  interactive  prompt  to  enter
              passwords.   (And  where security is truly important, use strong
              encryption such as Pretty Good Privacy instead of the relatively
              weak standard encryption provided by zipfile utilities.)

       -q
       --quiet
              Quiet   mode;   eliminate  informational  messages  and  comment
              prompts.  (Useful, for example, in shell scripts and  background
              tasks).

       -Qn
       --Q-flag n
              [QDOS]  store information about the file in the file header with
              n defined as
              bit  0: Don't add headers for any file
              bit  1: Add headers for all files
              bit  2: Don't wait for interactive key press on exit

       -r
       --recurse-paths
              Travel the directory structure recursively; for example:

                     zip -r foo.zip foo

              or more concisely

                     zip -r foo foo

              In this case, all the files and directories in foo are saved  in
              a zip archive named foo.zip, including files with names starting
              with ".", since the recursion does not use the shell's file-name
              substitution  mechanism.  If you wish to include only a specific
              subset of the files in directory foo and its subdirectories, use
              the  -i  option  to specify the pattern of files to be included.
              You should not use -r with the name  ".*",  since  that  matches
              ".."   which  will  attempt  to  zip  up  the  parent  directory
              (probably not what was intended).

              Multiple source directories are allowed as in

                     zip -r foo foo1 foo2

              which first  zips  up  foo1  and  then  foo2,  going  down  each
              directory.

              Note  that  while  wildcards  to -r are typically resolved while
              recursing down directories in the file system, any -R,  -x,  and
              -i  wildcards are applied to internal archive pathnames once the
              directories are scanned.  To have wildcards apply  to  files  in
              subdirectories  when recursing on Unix and similar systems where
              the  shell  does  wildcard  substitution,  either   escape   all
              wildcards  or  put all arguments with wildcards in quotes.  This
              lets zip see the wildcards and  match  files  in  subdirectories
              using them as it recurses.

       -R
       --recurse-patterns
              Travel  the  directory  structure  recursively  starting  at the
              current directory; for example:

                     zip -R foo "*.c"

              In this case, all the files matching *.c in the tree starting at
              the  current  directory  are  stored  into  a  zip archive named
              foo.zip.  Note that *.c will match file.c, a/file.c and  a/b/.c.
              More than one pattern can be listed as separate arguments.  Note
              for PKZIP users: the equivalent command is

                     pkzip -rP foo *.c

              Patterns are relative file paths as they appear in the  archive,
              or  will after zipping, and can have optional wildcards in them.
              For example, given the current directory is foo and under it are
              directories foo1 and foo2 and in foo1 is the file bar.c,

                     zip -R foo/*

              will zip up foo, foo/foo1, foo/foo1/bar.c, and foo/foo2.

                     zip -R */bar.c

              will  zip  up  foo/foo1/bar.c.   See the note for -r on escaping
              wildcards.

       -RE
       --regex
              [WIN32]  Before zip 3.0, regular expression  list  matching  was
              enabled  by  default on Windows platforms.  Because of confusion
              resulting from the need to escape "[" and "]" in  names,  it  is
              now  off  by  default for Windows so "[" and "]" are just normal
              characters in names.  This option enables [] matching again.

       -s splitsize
       --split-size splitsize
              Enable creating a split archive and set the split size.  A split
              archive  is  an archive that could be split over many files.  As
              the archive is created, if the size of the archive  reaches  the
              specified  split  size,  that split is closed and the next split
              opened.  In general all splits but the last will  be  the  split
              size  and  the  last  will  be  whatever is left.  If the entire
              archive is smaller than the split size a single-file archive  is
              created.

              Split  archives  are  stored in numbered files.  For example, if
              the output  archive  is  named  archive  and  three  splits  are
              required,  the  resulting  archive  will  be  in the three files
              archive.z01, archive.z02, and archive.zip.  Do  not  change  the
              numbering  of these files or the archive will not be readable as
              these are used to determine the order the splits are read.

              Split size is a number  optionally  followed  by  a  multiplier.
              Currently  the  number  must  be an integer.  The multiplier can
              currently be one of k (kilobytes), m (megabytes), g (gigabytes),
              or  t  (terabytes).   As  64k is the minimum split size, numbers
              without multipliers  default  to  megabytes.   For  example,  to
              create  a  split archive called foo with the contents of the bar
              directory with splits of 670 MB that might be useful for burning
              on CDs, the command:

                     zip -s 670m -r foo bar

              could be used.

              Currently  the  old  splits  of a split archive are not excluded
              from a new archive, but they can be specifically  excluded.   If
              possible,  keep  the  input  and output archives out of the path
              being zipped when creating split archives.

              Using -s without -sp as above creates all the splits  where  foo
              is  being  written,  in  this  case the current directory.  This
              split mode updates the splits as the archive is  being  created,
              requiring  all  splits  to  remain  writable,  but creates split
              archives that are readable by  any  unzip  that  supports  split
              archives.   See  -sp  below  for enabling split pause mode which
              allows splits to be written directly to removable media.

              The option -sv can be  used  to  enable  verbose  splitting  and
              provide  details  of  how  the splitting is being done.  The -sb
              option can be used to ring the bell when zip pauses for the next
              split destination.

              Split  archives cannot be updated, but see the -O (--out) option
              for how a split archive can be updated as it is copied to a  new
              archive.   A  split archive can also be converted into a single-
              file archive using a split size of 0 or negating the -s option:

                     zip -s 0 split.zip --out single.zip

              Also see -U (--copy) for more on using copy mode.

       -sb
       --split-bell
              If splitting and using split pause mode, ring the bell when  zip
              pauses for each split destination.

       -sc
       --show-command
              Show  the  command line starting zip as processed and exit.  The
              new command parser permutes the arguments, putting  all  options
              and  any  values  associated  with  them  before  any non-option
              arguments.  This allows an option  to  appear  anywhere  in  the
              command  line  as  long as any values that go with the option go
              with it.  This option displays the command line as zip sees  it,
              including  any  arguments  from the environment such as from the
              ZIPOPT variable.  Where allowed, options later  in  the  command
              line can override options earlier in the command line.

       -sf
       --show-files
              Show  the  files  that  would  be  operated  on, then exit.  For
              instance, if creating a new archive, this will  list  the  files
              that  would  be  added.   If the option is negated, -sf-, output
              only to an open log file.  Screen display is not recommended for
              large lists.

       -so
       --show-options
              Show  all  available options supported by zip as compiled on the
              current system.  As this command  reads  the  option  table,  it
              should include all options.  Each line includes the short option
              (if defined), the long option (if defined), the  format  of  any
              value  that  goes with the option, if the option can be negated,
              and a small description.  The value  format  can  be  no  value,
              required  value,  optional value, single character value, number
              value, or a list of values.  The output of this  option  is  not
              intended  to  show  how  to  use  any  option but only show what
              options are available.

       -sp
       --split-pause
              If splitting is enabled with -s, enable split pause mode.   This
              creates split archives as -s does, but stream writing is used so
              each split can be closed as soon as it is written and  zip  will
              pause  between each split to allow changing split destination or
              media.

              Though  this  split  mode  allows  writing  splits  directly  to
              removable  media,  it uses stream archive format that may not be
              readable by some unzips.  Before relying on splits created  with
              -sp, test a split archive with the unzip you will be using.

              To  convert  a  stream  split  archive  (created  with -sp) to a
              standard archive see the --out option.

       -su
       --show-unicode
              As -sf, but also show Unicode version of the path if exists.

       -sU
       --show-just-unicode
              As -sf, but only show Unicode version of  the  path  if  exists,
              otherwise show the standard version of the path.

       -sv
       --split-verbose
              Enable various verbose messages while splitting, showing how the
              splitting is being done.

       -S
       --system-hidden
              [MSDOS, OS/2, WIN32 and ATARI] Include system and hidden files.
              [MacOS] Includes  finder  invisible  files,  which  are  ignored
              otherwise.

       -t mmddyyyy
       --from-date mmddyyyy
              Do  not  operate  on files modified prior to the specified date,
              where mm is the month (00-12),  dd  is  the  day  of  the  month
              (01-31),  and  yyyy  is  the  year.   The  ISO 8601  date format
              yyyy-mm-dd is also accepted.  For example:

                     zip -rt 12071991 infamy foo

                     zip -rt 1991-12-07 infamy foo

              will add all the files in foo and its subdirectories  that  were
              last  modified  on  or after 7 December 1991, to the zip archive
              infamy.zip.

       -tt mmddyyyy
       --before-date mmddyyyy
              Do not operate on files modified after or at the specified date,
              where  mm  is  the  month  (00-12),  dd  is the day of the month
              (01-31), and  yyyy  is  the  year.   The  ISO 8601  date  format
              yyyy-mm-dd is also accepted.  For example:

                     zip -rtt 11301995 infamy foo

                     zip -rtt 1995-11-30 infamy foo

              will  add  all the files in foo and its subdirectories that were
              last modified before  30  November  1995,  to  the  zip  archive
              infamy.zip.

       -T
       --test
              Test  the integrity of the new zip file. If the check fails, the
              old zip file is unchanged and (with  the  -m  option)  no  input
              files are removed.

       -TT cmd
       --unzip-command cmd
              Use  command cmd instead of 'unzip -tqq' to test an archive when
              the -T option is used.  On Unix, to use a copy of unzip  in  the
              current  directory  instead  of the standard system unzip, could
              use:

               zip archive file1 file2 -T -TT "./unzip -tqq"

              In cmd, {} is replaced by the name  of  the  temporary  archive,
              otherwise  the name of the archive is appended to the end of the
              command.  The return code is checked for success (0 on Unix).

       -u
       --update
              Replace (update) an existing entry in the zip archive only if it
              has  been modified more recently than the version already in the
              zip archive.  For example:

                     zip -u stuff *

              will add any new files in the current directory, and update  any
              files  which  have been modified since the zip archive stuff.zip
              was last created/modified (note that zip will not  try  to  pack
              stuff.zip into itself when you do this).

              Note  that  the -u option with no input file arguments acts like
              the -f (freshen) option.

       -U
       --copy-entries
              Copy entries from one archive to another.   Requires  the  --out
              option  to  specify  a  different  output  file  than  the input
              archive.  Copy mode is the reverse of -d delete.  When delete is
              being used with --out, the selected entries are deleted from the
              archive and all other entries are copied  to  the  new  archive,
              while copy mode selects the files to include in the new archive.
              Unlike -u update, input patterns on the command line are matched
              against archive entries only and not the file system files.  For
              instance,

                     zip inarchive "*.c" --copy --out outarchive

              copies entries  with  names  ending  in  .c  from  inarchive  to
              outarchive.   The  wildcard  must  be escaped on some systems to
              prevent the shell from substituting names of files from the file
              system  which  may  have  no  relevance  to  the  entries in the
              archive.

              If no input files appear on the command line and --out is  used,
              copy mode is assumed:

                     zip inarchive --out outarchive

              This is useful for changing split size for instance.  Encrypting
              and decrypting entries is not yet  supported  using  copy  mode.
              Use zipcloak for that.

       -UN v
       --unicode v
              Determine  what zip should do with Unicode file names.  zip 3.0,
              in addition to the standard file path, now  includes  the  UTF-8
              translation  of the path if the entry path is not entirely 7-bit
              ASCII.  When an entry is missing the Unicode path,  zip  reverts
              back  to  the  standard  file  path.  The problem with using the
              standard path is this path is in the local character set of  the
              zip  that  created  the entry, which may contain characters that
              are not valid in the character set  being  used  by  the  unzip.
              When  zip  is reading an archive, if an entry also has a Unicode
              path, zip now defaults to using the Unicode path to recreate the
              standard path using the current local character set.

              This  option  can  be  used to determine what zip should do with
              this path if there is a mismatch  between  the  stored  standard
              path and the stored UTF-8 path (which can happen if the standard
              path was updated).  In all cases, if there is a mismatch  it  is
              assumed  that  the  standard  path  is more current and zip uses
              that.  Values for v are

                     q - quit if paths do not match

                     w - warn, continue with standard path

                     i - ignore, continue with standard path

                     n - no Unicode, do not use Unicode paths

              The default is to warn and continue.

              Characters that are not valid in the current character  set  are
              escaped  as  #Uxxxx  and #Lxxxxxx, where x is an ASCII character
              for a hex digit.  The first is used if a 16-bit character number
              is  sufficient to represent the Unicode character and the second
              if the character needs more  than  16  bits  to  represent  it's
              Unicode character code.  Setting -UN to

                     e - escape

              as in

                     zip archive -sU -UN=e

              forces zip to escape all characters that are not printable 7-bit
              ASCII.

              Normally zip stores UTF-8 directly in the standard path field on
              systems  where UTF-8 is the current character set and stores the
              UTF-8 in the new extra fields otherwise.  The option

                     u - UTF-8

              as in

                     zip archive dir -r -UN=UTF8

              forces zip to store UTF-8 as native in the archive.   Note  that
              storing  UTF-8  directly  is  the  default  on Unix systems that
              support it.  This option could  be  useful  on  Windows  systems
              where  the  escaped path is too large to be a valid path and the
              UTF-8 version of the path is smaller, but native  UTF-8  is  not
              backward compatible on Windows systems.

       -v
       --verbose
              Verbose mode or print diagnostic version info.

              Normally,  when  applied to real operations, this option enables
              the display of a progress indicator during compression (see  -dd
              for  more  on  dots)  and requests verbose diagnostic info about
              zipfile structure oddities.

              However, when -v is the only command line argument a  diagnostic
              screen  is printed instead.  This should now work even if stdout
              is redirected to a file, allowing easy saving of the information
              for  sending  with  bug reports to Info-ZIP.  The version screen
              provides the help screen header with program name, version,  and
              release   date,   some   pointers   to  the  Info-ZIP  home  and
              distribution sites,  and  shows  information  about  the  target
              environment  (compiler type and version, OS version, compilation
              date and the enabled optional features used to  create  the  zip
              executable).

       -V
       --VMS-portable
              [VMS]  Save VMS file attributes.  (Files are  truncated at EOF.)
              When a -V archive is unpacked on a non-VMS  system,   some  file
              types  (notably  Stream_LF  text  files   and  pure binary files
              like fixed-512) should be extracted intact.  Indexed  files  and
              file  types  with embedded record sizes (notably variable-length
              record types) will probably be seen as corrupt elsewhere.

       -VV
       --VMS-specific
              [VMS] Save VMS file attributes, and  all allocated blocks  in  a
              file,   including  any  data beyond EOF.  Useful for moving ill-
              formed files  among   VMS  systems.    When  a  -VV  archive  is
              unpacked  on  a  non-VMS  system,  almost  all files will appear
              corrupt.

       -w
       --VMS-versions
              [VMS] Append the version  number  of  the  files  to  the  name,
              including  multiple  versions  of files.  Default is to use only
              the most recent version of a specified file.

       -ww
       --VMS-dot-versions
              [VMS] Append the version  number  of  the  files  to  the  name,
              including  multiple  versions  of  files, using the .nnn format.
              Default is to use only the most recent version  of  a  specified
              file.

       -ws
       --wild-stop-dirs
              Wildcards match only at a directory level.  Normally zip handles
              paths as strings and given the paths

                     /foo/bar/dir/file1.c

                     /foo/bar/file2.c

              an input pattern such as

                     /foo/bar/*

              normally would match both paths, the * matching dir/file1.c  and
              file2.c.   Note  that in the first case a directory boundary (/)
              was crossed in the match.  With -ws no directory bounds will  be
              included  in  the  match,  making  wildcards local to a specific
              directory level.  So, with -ws enabled,  only  the  second  path
              would be matched.

              When using -ws, use ** to match across directory boundaries as *
              does normally.

       -x files
       --exclude files
              Explicitly exclude the specified files, as in:

                     zip -r foo foo -x \*.o

              which  will  include  the  contents  of  foo  in  foo.zip  while
              excluding  all  the  files that end in .o.  The backslash avoids
              the shell filename substitution, so that the  name  matching  is
              performed by zip at all directory levels.

              Also possible:

                     zip -r foo foo -x@exclude.lst

              which  will  include  the  contents  of  foo  in  foo.zip  while
              excluding all the files that match  the  patterns  in  the  file
              exclude.lst.

              The long option forms of the above are

                     zip -r foo foo --exclude \*.o

              and

                     zip -r foo foo --exclude @exclude.lst

              Multiple patterns can be specified, as in:

                     zip -r foo foo -x \*.o \*.c

              If  there is no space between -x and the pattern, just one value
              is assumed (no list):

                     zip -r foo foo -x\*.o

              See -i for more on include and exclude.

       -X
       --no-extra
              Do not save extra file attributes (Extended Attributes on  OS/2,
              uid/gid  and  file  times  on  Unix).  The zip format uses extra
              fields to include additional information for each  entry.   Some
              extra fields are specific to particular systems while others are
              applicable to all systems.  Normally when zip reads entries from
              an  existing archive, it reads the extra fields it knows, strips
              the rest, and adds the extra fields applicable to  that  system.
              With -X, zip strips all old fields and only includes the Unicode
              and Zip64 extra fields (currently these two extra fields  cannot
              be disabled).

              Negating  this  option,  -X-,  includes  all  the  default extra
              fields, but also copies over any unrecognized extra fields.

       -y
       --symlinks
              For UNIX and VMS (V8.3 and later), store symbolic links as  such
              in  the zip archive, instead of compressing and storing the file
              referred to by the link.  This  can  avoid  multiple  copies  of
              files  being  included  in  the  archive  as  zip  recurses  the
              directory trees and accesses files directly and by links.

       -z
       --archive-comment
              Prompt for a multi-line comment for the entire zip archive.  The
              comment  is  ended by a line containing just a period, or an end
              of file condition (^D on Unix, ^Z on MSDOS, OS/2, and VMS).  The
              comment can be taken from a file:

                     zip -z foo < foowhat

       -Z cm
       --compression-method cm
              Set  the default compression method.  Currently the main methods
              supported by zip are store and deflate.  Compression method  can
              be set to:

              store  -  Setting  the compression method to store forces zip to
              store entries with no compression.   This  is  generally  faster
              than compressing entries, but results in no space savings.  This
              is the same as using -0 (compression level zero).

              deflate - This is the default method for zip.  If zip determines
              that  storing is better than deflation, the entry will be stored
              instead.

              bzip2 - If bzip2 support is compiled in, this compression method
              also  becomes  available.   Only  some  modern  unzips currently
              support the bzip2 compression method, so test the unzip you will
              be   using   before   relying  on  archives  using  this  method
              (compression method 12).

              For  example,  to  add  bar.c  to  archive   foo   using   bzip2
              compression:

                     zip -Z bzip2 foo bar.c

              The compression method can be abbreviated:

                     zip -Zb foo bar.c

       -#
       (-0, -1, -2, -3, -4, -5, -6, -7, -8, -9)
              Regulate  the  speed of compression using the specified digit #,
              where  -0  indicates  no  compression  (store  all  files),   -1
              indicates  the  fastest compression speed (less compression) and
              -9 indicates the slowest compression speed (optimal compression,
              ignores the suffix list). The default compression level is -6.

              Though  still  being  worked, the intention is this setting will
              control  compression  speed   for   all   compression   methods.
              Currently only deflation is controlled.

       -!
       --use-privileges
              [WIN32]  Use  privileges  (if  granted) to obtain all aspects of
              WinNT security.

       -@
       --names-stdin
              Take the list of input  files  from  standard  input.  Only  one
              filename per line.

       -$
       --volume-label
              [MSDOS,  OS/2,  WIN32]  Include  the  volume label for the drive
              holding the first file to be compressed.  If you want to include
              only  the  volume  label  or  to force a specific drive, use the
              drive name as first file name, as in:

                     zip -$ foo a: c:bar

EXAMPLES

       The simplest example:

              zip stuff *

       creates the archive stuff.zip (assuming it does not exist) and puts all
       the  files in the current directory in it, in compressed form (the .zip
       suffix is added automatically, unless the archive name contains  a  dot
       already; this allows the explicit specification of other suffixes).

       Because  of the way the shell on Unix does filename substitution, files
       starting with "." are not included; to include these as well:

              zip stuff .* *

       Even  this  will  not  include  any  subdirectories  from  the  current
       directory.

       To zip up an entire directory, the command:

              zip -r foo foo

       creates  the  archive foo.zip, containing all the files and directories
       in the directory foo that is contained within the current directory.

       You may want to make a zip archive that  contains  the  files  in  foo,
       without  recording  the directory name, foo.  You can use the -j option
       to leave off the paths, as in:

              zip -j foo foo/*

       If you are short on disk space, you might not have enough room to  hold
       both  the  original  directory  and  the  corresponding  compressed zip
       archive.  In this case, you can create the archive in steps  using  the
       -m  option.   If  foo contains the subdirectories tom, dick, and harry,
       you can:

              zip -rm foo foo/tom
              zip -rm foo foo/dick
              zip -rm foo foo/harry

       where the first command creates foo.zip, and the next two  add  to  it.
       At  the  completion  of  each  zip command, the last created archive is
       deleted, making room for the next zip command to function.

       Use -s to set the split size and create a split archive.  The  size  is
       given as a number followed optionally by one of k (kB), m (MB), g (GB),
       or t (TB).  The command

              zip -s 2g -r split.zip foo

       creates a split archive of the directory foo with splits no bigger than
       2 GB  each.   If  foo  contained 5 GB of contents and the contents were
       stored in the split archive without compression (to make  this  example
       simple),  this  would create three splits, split.z01 at 2 GB, split.z02
       at 2 GB, and split.zip at a little over 1 GB.

       The -sp option can be  used  to  pause  zip  between  splits  to  allow
       changing  removable  media,  for example, but read the descriptions and
       warnings for both -s and -sp below.

       Though zip does not update split archives, zip provides the new  option
       -O (--output-file) to allow split archives to be updated and saved in a
       new archive.  For example,

              zip inarchive.zip foo.c bar.c --out outarchive.zip

       reads archive inarchive.zip, even if split, adds the  files  foo.c  and
       bar.c,   and  writes  the  resulting  archive  to  outarchive.zip.   If
       inarchive.zip is split then outarchive.zip defaults to the  same  split
       size.   Be  aware  that  outarchive.zip  and  any  split files that are
       created with it are always overwritten without warning.   This  may  be
       changed in the future.

PATTERN MATCHING

       This  section  applies  only  to Unix.  Watch this space for details on
       MSDOS and VMS operation.  However, the special  wildcard  characters  *
       and [] below apply to at least MSDOS also.

       The  Unix  shells  (sh,  csh,  bash,  and  others) normally do filename
       substitution (also called "globbing") on command arguments.   Generally
       the special characters are:

       ?      match any single character

       *      match any number of characters (including none)

       []     match  any  character in the range indicated within the brackets
              (example: [a-f], [0-9]).  This form of wildcard matching  allows
              a  user  to specify a list of characters between square brackets
              and if any of the characters match the expression matches.   For
              example:

                     zip archive "*.[hc]"

              would  archive all files in the current directory that end in .h
              or .c.

              Ranges of characters are supported:

                     zip archive "[a-f]*"

              would add to the archive all files  starting  with  "a"  through
              "f".

              Negation is also supported, where any character in that position
              not in the list matches.  Negation is supported by adding ! or ^
              to the beginning of the list:

                     zip archive "*.[!o]"

              matches files that don't end in ".o".

              On  WIN32, [] matching needs to be turned on with the -RE option
              to avoid the confusion that names with [ or ] have caused.

       When these characters are encountered (without  being  escaped  with  a
       backslash  or  quotes),  the  shell will look for files relative to the
       current path that match the pattern, and replace the  argument  with  a
       list of the names that matched.

       The  zip  program can do the same matching on names that are in the zip
       archive being modified or, in the  case  of  the  -x  (exclude)  or  -i
       (include)  options,  on  the  list of files to be operated on, by using
       backslashes or quotes to tell the shell not to do the  name  expansion.
       In  general,  when zip encounters a name in the list of files to do, it
       first looks for the name in the file system.  If it finds it,  it  then
       adds  it  to the list of files to do.  If it does not find it, it looks
       for the name in the zip archive being modified (if  it  exists),  using
       the  pattern matching characters described above, if present.  For each
       match, it will add that name to the list  of  files  to  be  processed,
       unless  this  name  matches  one  given with the -x option, or does not
       match any name given with the -i option.

       The pattern matching includes the path, and so patterns like \*.o match
       names  that  end in ".o", no matter what the path prefix is.  Note that
       the backslash must precede every special character (i.e. ?*[]), or  the
       entire argument must be enclosed in double quotes ("").

       In  general,  use  backslashes  or  double  quotes  for paths that have
       wildcards to make zip do the  pattern  matching  for  file  paths,  and
       always  for paths and strings that have spaces or wildcards for -i, -x,
       -R, -d, and -U and anywhere zip needs to process the wildcards.

ENVIRONMENT

       The following environment  variables  are  read  and  used  by  zip  as
       described.

       ZIPOPT
              contains  default  options  that  will be used when running zip.
              The contents of this environment variable will get added to  the
              command line just after the zip command.

       ZIP
              [Not on RISC OS and VMS] see ZIPOPT

       Zip$Options
              [RISC OS] see ZIPOPT

       Zip$Exts
              [RISC  OS]  contains extensions separated by a : that will cause
              native filenames with one of  the  specified  extensions  to  be
              added to the zip file with basename and extension swapped.

       ZIP_OPTS
              [VMS] see ZIPOPT

SEE ALSO

       compress(1), shar(1), tar(1), unzip(1), gzip(1)

DIAGNOSTICS

       The exit status (or error level) approximates the exit codes defined by
       PKWARE and takes on the following values, except under VMS:

              0      normal; no errors or warnings detected.

              2      unexpected end of zip file.

              3      a generic error  in  the  zipfile  format  was  detected.
                     Processing  may  have completed successfully anyway; some
                     broken zipfiles created by other  archivers  have  simple
                     work-arounds.

              4      zip was unable to allocate memory for one or more buffers
                     during program initialization.

              5      a severe  error  in  the  zipfile  format  was  detected.
                     Processing probably failed immediately.

              6      entry  too  large  to  be  processed (such as input files
                     larger than 2 GB when not using Zip64 or trying  to  read
                     an existing archive that is too large) or entry too large
                     to be split with zipsplit

              7      invalid comment format

              8      zip -T failed or out of memory

              9      the user  aborted  zip  prematurely  with  control-C  (or
                     similar)

              10     zip encountered an error while using a temp file

              11     read or seek error

              12     zip has nothing to do

              13     missing or empty zip file

              14     error writing to a file

              15     zip was unable to create a file to write to

              16     bad command line parameters

              18     zip could not open a specified file to read

              19     zip  was  compiled  with  options  not  supported on this
                     system

       VMS interprets standard Unix (or PC) return values as  other,  scarier-
       looking  things,  so zip instead maps them into VMS-style status codes.
       In  general,  zip  sets  VMS  Facility  =  1955  (0x07A3),  Code  =  2*
       Unix_status,  and  an  appropriate Severity (as specified in ziperr.h).
       More details are  included  in  the  VMS-specific  documentation.   See
       [.vms]NOTES.TXT and [.vms]vms_msg_gen.c.

BUGS

       zip 3.0 is not compatible with PKUNZIP 1.10. Use zip 1.1 to produce zip
       files which can be extracted by PKUNZIP 1.10.

       zip files produced by zip 3.0 must not be updated by zip 1.1  or  PKZIP
       1.10,  if  they contain encrypted members or if they have been produced
       in a pipe or on a non-seekable device. The old versions of zip or PKZIP
       would create an archive with an incorrect format.  The old versions can
       list the contents of the zip file but cannot extract it anyway (because
       of  the  new  compression algorithm).  If you do not use encryption and
       use regular disk files, you do not have to care about this problem.

       Under VMS, not all of the odd file formats are treated properly.   Only
       stream-LF  format  zip files are expected to work with zip.  Others can
       be converted using Rahul Dhesi's BILF program.   This  version  of  zip
       handles  some  of  the  conversion  internally.   When  using Kermit to
       transfer zip files from VMS to MSDOS, type "set  file  type  block"  on
       VMS.   When  transferring from MSDOS to VMS, type "set file type fixed"
       on VMS.  In both cases, type "set file type binary" on MSDOS.

       Under some older VMS versions, zip may  hang  for  file  specifications
       that use DECnet syntax foo::*.*.

       On  OS/2,  zip  cannot  match  some  names,  such as those including an
       exclamation mark or a hash sign.  This is a bug  in  OS/2  itself:  the
       32-bit DosFindFirst/Next don't find such names.  Other programs such as
       GNU tar are also affected by this bug.

       Under OS/2, the amount of Extended Attributes displayed by DIR is  (for
       compatibility)   the   amount   returned   by  the  16-bit  version  of
       DosQueryPathInfo(). Otherwise OS/2 1.3 and 2.0 would  report  different
       EA sizes when DIRing a file.  However, the structure layout returned by
       the 32-bit DosQueryPathInfo() is a bit different, it uses extra padding
       bytes  and  link  pointers  (it's  a linked list) to have all fields on
       4-byte  boundaries  for  portability  to  future  RISC  OS/2  versions.
       Therefore  the value reported by zip (which uses this 32-bit-mode size)
       differs from that reported by DIR.  zip stores the  32-bit  format  for
       portability, even the 16-bit MS-C-compiled version running on OS/2 1.3,
       so even this one shows the 32-bit-mode size.

AUTHORS

       Copyright (C) 1997-2008 Info-ZIP.

       Currently distributed under the Info-ZIP license.

       Copyright (C) 1990-1997 Mark Adler, Richard B. Wales, Jean-loup Gailly,
       Onno  van  der Linden, Kai Uwe Rommel, Igor Mandrichenko, John Bush and
       Paul Kienitz.

       Original copyright:

       Permission is granted to any individual or institution to use, copy, or
       redistribute  this  software  so  long as all of the original files are
       included, that it is not sold  for  profit,  and  that  this  copyright
       notice is retained.

       LIKE  ANYTHING  ELSE  THAT'S FREE, ZIP AND ITS ASSOCIATED UTILITIES ARE
       PROVIDED AS IS AND COME WITH NO WARRANTY OF ANY KIND, EITHER  EXPRESSED
       OR  IMPLIED.  IN  NO EVENT WILL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY
       DAMAGES RESULTING FROM THE USE OF THIS SOFTWARE.

       Please send bug reports and comments using the web page  at:  www.info-
       zip.org.   For  bug  reports,  please  include  the version of zip (see
       zip -h), the make options used to compile it (see zip -v), the  machine
       and  operating  system  in  use,  and as much additional information as
       possible.

ACKNOWLEDGEMENTS

       Thanks to R. P. Byrne for his Shrink.Pas program, which  inspired  this
       project,  and  from which the shrink algorithm was stolen; to Phil Katz
       for placing in the public  domain  the  zip  file  format,  compression
       format, and .ZIP filename extension, and for accepting minor changes to
       the file format; to  Steve  Burg  for  clarifications  on  the  deflate
       format;  to  Haruhiko  Okumura  and  Leonid Broukhis for providing some
       useful ideas for the compression algorithm;  to  Keith  Petersen,  Rich
       Wales,  Hunter  Goatley and Mark Adler for providing a mailing list and
       ftp site for the Info-ZIP group to use; and most  importantly,  to  the
       Info-ZIP  group  itself  (listed in the file infozip.who) without whose
       tireless testing and bug-fixing efforts a portable zip would  not  have
       been  possible.   Finally  we  should  thank (blame) the first Info-ZIP
       moderator, David Kirschbaum, for getting us into this mess in the first
       place.   The manual page was rewritten for Unix by R. P. C. Rodgers and
       updated by E. Gordon for zip 3.0.