Provided by: libpcre3-dev_8.12-4_i386 bug

NAME

       PCRE - Perl-compatible regular expressions

PCRE REGULAR EXPRESSION SYNTAX SUMMARY


       The  full  syntax  and  semantics  of  the regular expressions that are
       supported by PCRE are described in the pcrepattern documentation.  This
       document contains just a quick-reference summary of the syntax.

QUOTING


         \x         where x is non-alphanumeric is a literal x
         \Q...\E    treat enclosed characters as literal

CHARACTERS


         \a         alarm, that is, the BEL character (hex 07)
         \cx        "control-x", where x is any ASCII character
         \e         escape (hex 1B)
         \f         formfeed (hex 0C)
         \n         newline (hex 0A)
         \r         carriage return (hex 0D)
         \t         tab (hex 09)
         \ddd       character with octal code ddd, or backreference
         \xhh       character with hex code hh
         \x{hhh..}  character with hex code hhh..

CHARACTER TYPES


         .          any character except newline;
                      in dotall mode, any character whatsoever
         \C         one byte, even in UTF-8 mode (best avoided)
         \d         a decimal digit
         \D         a character that is not a decimal digit
         \h         a horizontal whitespace character
         \H         a character that is not a horizontal whitespace character
         \N         a character that is not a newline
         \p{xx}     a character with the xx property
         \P{xx}     a character without the xx property
         \R         a newline sequence
         \s         a whitespace character
         \S         a character that is not a whitespace character
         \v         a vertical whitespace character
         \V         a character that is not a vertical whitespace character
         \w         a "word" character
         \W         a "non-word" character
         \X         an extended Unicode sequence

       In  PCRE,  by  default, \d, \D, \s, \S, \w, and \W recognize only ASCII
       characters, even in UTF-8 mode. However, this can be changed by setting
       the PCRE_UCP option.

GENERAL CATEGORY PROPERTIES FOR \p and \P


         C          Other
         Cc         Control
         Cf         Format
         Cn         Unassigned
         Co         Private use
         Cs         Surrogate

         L          Letter
         Ll         Lower case letter
         Lm         Modifier letter
         Lo         Other letter
         Lt         Title case letter
         Lu         Upper case letter
         L&         Ll, Lu, or Lt

         M          Mark
         Mc         Spacing mark
         Me         Enclosing mark
         Mn         Non-spacing mark

         N          Number
         Nd         Decimal number
         Nl         Letter number
         No         Other number

         P          Punctuation
         Pc         Connector punctuation
         Pd         Dash punctuation
         Pe         Close punctuation
         Pf         Final punctuation
         Pi         Initial punctuation
         Po         Other punctuation
         Ps         Open punctuation

         S          Symbol
         Sc         Currency symbol
         Sk         Modifier symbol
         Sm         Mathematical symbol
         So         Other symbol

         Z          Separator
         Zl         Line separator
         Zp         Paragraph separator
         Zs         Space separator

PCRE SPECIAL CATEGORY PROPERTIES FOR \p and \P


         Xan        Alphanumeric: union of properties L and N
         Xps        POSIX space: property Z or tab, NL, VT, FF, CR
         Xsp        Perl space: property Z or tab, NL, FF, CR
         Xwd        Perl word: property Xan or underscore

SCRIPT NAMES FOR \p AND \P


       Arabic, Armenian, Avestan, Balinese, Bamum, Bengali, Bopomofo, Braille,
       Buginese, Buhid, Canadian_Aboriginal, Carian, Cham,  Cherokee,  Common,
       Coptic,    Cuneiform,    Cypriot,    Cyrillic,   Deseret,   Devanagari,
       Egyptian_Hieroglyphs, Ethiopic, Georgian,  Glagolitic,  Gothic,  Greek,
       Gujarati,   Gurmukhi,   Han,   Hangul,   Hanunoo,   Hebrew,   Hiragana,
       Imperial_Aramaic,           Inherited,           Inscriptional_Pahlavi,
       Inscriptional_Parthian,  Javanese, Kaithi, Kannada, Katakana, Kayah_Li,
       Kharoshthi, Khmer, Lao, Latin, Lepcha, Limbu, Linear_B,  Lisu,  Lycian,
       Lydian,  Malayalam, Meetei_Mayek, Mongolian, Myanmar, New_Tai_Lue, Nko,
       Ogham,   Old_Italic,   Old_Persian,   Old_South_Arabian,    Old_Turkic,
       Ol_Chiki,   Oriya,   Osmanya,   Phags_Pa,  Phoenician,  Rejang,  Runic,
       Samaritan,  Saurashtra,  Shavian,  Sinhala,  Sundanese,   Syloti_Nagri,
       Syriac,  Tagalog,  Tagbanwa, Tai_Le, Tai_Tham, Tai_Viet, Tamil, Telugu,
       Thaana, Thai, Tibetan, Tifinagh, Ugaritic, Vai, Yi.

CHARACTER CLASSES


         [...]       positive character class
         [^...]      negative character class
         [x-y]       range (can be used for hex characters)
         [[:xxx:]]   positive POSIX named set
         [[:^xxx:]]  negative POSIX named set

         alnum       alphanumeric
         alpha       alphabetic
         ascii       0-127
         blank       space or tab
         cntrl       control character
         digit       decimal digit
         graph       printing, excluding space
         lower       lower case letter
         print       printing, including space
         punct       printing, excluding alphanumeric
         space       whitespace
         upper       upper case letter
         word        same as \w
         xdigit      hexadecimal digit

       In PCRE, POSIX character set names recognize only ASCII  characters  by
       default,  but  some  of them use Unicode properties if PCRE_UCP is set.
       You can use \Q...\E inside a character class.

QUANTIFIERS


         ?           0 or 1, greedy
         ?+          0 or 1, possessive
         ??          0 or 1, lazy
         *           0 or more, greedy
         *+          0 or more, possessive
         *?          0 or more, lazy
         +           1 or more, greedy
         ++          1 or more, possessive
         +?          1 or more, lazy
         {n}         exactly n
         {n,m}       at least n, no more than m, greedy
         {n,m}+      at least n, no more than m, possessive
         {n,m}?      at least n, no more than m, lazy
         {n,}        n or more, greedy
         {n,}+       n or more, possessive
         {n,}?       n or more, lazy

ANCHORS AND SIMPLE ASSERTIONS


         \b          word boundary
         \B          not a word boundary
         ^           start of subject
                      also after internal newline in multiline mode
         \A          start of subject
         $           end of subject
                      also before newline at end of subject
                      also before internal newline in multiline mode
         \Z          end of subject
                      also before newline at end of subject
         \z          end of subject
         \G          first matching position in subject

MATCH POINT RESET


         \K          reset start of match

ALTERNATION


         expr|expr|expr...

CAPTURING


         (...)           capturing group
         (?<name>...)    named capturing group (Perl)
         (?'name'...)    named capturing group (Perl)
         (?P<name>...)   named capturing group (Python)
         (?:...)         non-capturing group
         (?|...)         non-capturing group; reset group numbers for
                          capturing groups in each alternative

ATOMIC GROUPS


         (?>...)         atomic, non-capturing group

COMMENT


         (?#....)        comment (not nestable)

OPTION SETTING


         (?i)            caseless
         (?J)            allow duplicate names
         (?m)            multiline
         (?s)            single line (dotall)
         (?U)            default ungreedy (lazy)
         (?x)            extended (ignore white space)
         (?-...)         unset option(s)

       The following are recognized only at the start of a  pattern  or  after
       one of the newline-setting options with similar syntax:

         (*NO_START_OPT) no start-match optimization (PCRE_NO_START_OPTIMIZE)
         (*UTF8)         set UTF-8 mode (PCRE_UTF8)
         (*UCP)          set PCRE_UCP (use Unicode properties for \d etc)

LOOKAHEAD AND LOOKBEHIND ASSERTIONS


         (?=...)         positive look ahead
         (?!...)         negative look ahead
         (?<=...)        positive look behind
         (?<!...)        negative look behind

       Each top-level branch of a look behind must be of a fixed length.

BACKREFERENCES


         \n              reference by number (can be ambiguous)
         \gn             reference by number
         \g{n}           reference by number
         \g{-n}          relative reference by number
         \k<name>        reference by name (Perl)
         \k'name'        reference by name (Perl)
         \g{name}        reference by name (Perl)
         \k{name}        reference by name (.NET)
         (?P=name)       reference by name (Python)

SUBROUTINE REFERENCES (POSSIBLY RECURSIVE)


         (?R)            recurse whole pattern
         (?n)            call subpattern by absolute number
         (?+n)           call subpattern by relative number
         (?-n)           call subpattern by relative number
         (?&name)        call subpattern by name (Perl)
         (?P>name)       call subpattern by name (Python)
         \g<name>        call subpattern by name (Oniguruma)
         \g'name'        call subpattern by name (Oniguruma)
         \g<n>           call subpattern by absolute number (Oniguruma)
         \g'n'           call subpattern by absolute number (Oniguruma)
         \g<+n>          call subpattern by relative number (PCRE extension)
         \g'+n'          call subpattern by relative number (PCRE extension)
         \g<-n>          call subpattern by relative number (PCRE extension)
         \g'-n'          call subpattern by relative number (PCRE extension)

CONDITIONAL PATTERNS


         (?(condition)yes-pattern)
         (?(condition)yes-pattern|no-pattern)

         (?(n)...        absolute reference condition
         (?(+n)...       relative reference condition
         (?(-n)...       relative reference condition
         (?(<name>)...   named reference condition (Perl)
         (?('name')...   named reference condition (Perl)
         (?(name)...     named reference condition (PCRE)
         (?(R)...        overall recursion condition
         (?(Rn)...       specific group recursion condition
         (?(R&name)...   specific recursion condition
         (?(DEFINE)...   define subpattern for reference
         (?(assert)...   assertion condition

BACKTRACKING CONTROL


       The following act immediately they are reached:

         (*ACCEPT)       force successful match
         (*FAIL)         force backtrack; synonym (*F)

       The  following  act  only  when  a  subsequent  match  failure causes a
       backtrack to reach them. They all  force  a  match  failure,  but  they
       differ  in  what  happens  afterwards. Those that advance the start-of-
       match point do so only if the pattern is not anchored.

         (*COMMIT)       overall failure, no advance of starting point
         (*PRUNE)        advance to next starting character
         (*SKIP)         advance start to current matching position
         (*THEN)         local failure, backtrack to next alternation

NEWLINE CONVENTIONS


       These are recognized only at the very start of the pattern or  after  a
       (*BSR_...) or (*UTF8) or (*UCP) option.

         (*CR)           carriage return only
         (*LF)           linefeed only
         (*CRLF)         carriage return followed by linefeed
         (*ANYCRLF)      all three of the above
         (*ANY)          any Unicode newline sequence

WHAT \R MATCHES


       These  are  recognized only at the very start of the pattern or after a
       (*...) option that sets the newline convention or UTF-8 or UCP mode.

         (*BSR_ANYCRLF)  CR, LF, or CRLF
         (*BSR_UNICODE)  any Unicode newline sequence

CALLOUTS


         (?C)      callout
         (?Cn)     callout with data n

SEE ALSO


       pcrepattern(3), pcreapi(3), pcrecallout(3), pcrematching(3), pcre(3).

AUTHOR


       Philip Hazel
       University Computing Service
       Cambridge CB2 3QH, England.

REVISION


       Last updated: 21 November 2010
       Copyright (c) 1997-2010 University of Cambridge.

                                                                 PCRESYNTAX(3)