Provided by: freebsd-manpages_8.2-1_all bug


     ng_lmi — frame relay LMI protocol netgraph node type


     #include <sys/types.h>
     #include <netgraph/ng_lmi.h>


     The lmi node type performs the frame relay LMI protocol.  It supports the
     ITU Annex A, ANSI Annex D, and Group-of-four LMI types.  It also supports
     auto-detection of the LMI type.

     To enable a specific LMI type, connect the corresponding hook (annexA,
     annexD, or group4) to DLCI 0 or 1023 of a ng_frame_relay(4) node.
     Typically, Annex A and Annex D live on DLCI 0 while Group-of-four lives
     on DLCI 1023.

     To enable LMI type auto-detection, connect the auto0 hook to DLCI 0 and
     the auto1023 hook to DLCI 1023.  The node will attempt to automatically
     determine which LMI type is running at the switch, and go into that mode.

     Only one fixed LMI type, or auto-detection, can be active at any given

     The NGM_LMI_GET_STATUS control message can be used at any time to query
     the current status of the LMI protocol and each DLCI channel.  This node
     also supports the NGM_TEXT_STATUS control message.


     This node type supports the following hooks:

     annexA     ITU Annex A LMI hook.

     annexD     ANSI Annex D LMI hook.

     group4     Group-of-four LMI hook.

     auto0      Auto-detection hook for DLCI 0.

     auto1023   Auto-detection hook for DLCI 1023.


     This node type supports the generic control messages, plus the following:

          This command returns status information in a struct nglmistat:

              #define NGM_LMI_STAT_ARYSIZE   (1024/8)

              struct nglmistat {
                u_char  proto[12];    /* Active proto (same as hook name) */
                u_char  hook[12];     /* Active hook */
                u_char  fixed;        /* If set to fixed LMI mode */
                u_char  autod;        /* If currently auto-detecting */
                u_char  seen[NGM_LMI_STAT_ARYSIZE];   /* bitmap DLCIs seen */
                u_char  up[NGM_LMI_STAT_ARYSIZE];     /* bitmap DLCIs up */

          This generic message returns is a human-readable version of the node


     This node shuts down upon receipt of a NGM_SHUTDOWN control message, or
     when all hooks have been disconnected.


     netgraph(4), ng_frame_relay(4), ngctl(8)

     ANSI T1.617-1991 Annex D.

     ITU-T Q.933 Digital Subscriber Signaling System No. 1 - Signaling
     Specification for Frame Mode Basic Call Control, Annex A.


     The ng_lmi node type was implemented in FreeBSD 4.0.


     Julian Elischer ⟨