Provided by: auditd_1.7.18-1ubuntu1_amd64 bug

NAME

       auditd.conf - audit daemon configuration file

DESCRIPTION

       The  file  /etc/audit/auditd.conf contains configuration information specific to the audit
       daemon.  It should contain one configuration keyword per line, an  equal  sign,  and  then
       followed  by appropriate configuration information. The keywords recognized are: log_file,
       log_format, log_group, priority_boost, flush, freq,  num_logs  ,  disp_qos  ,  dispatcher,
       name_format  ,  name,  max_log_file,  max_log_file_action,  space_left,  action_mail_acct,
       space_left_action,    admin_space_left,     admin_space_left_action,     disk_full_action,
       disk_error_action,   tcp_listen_port,   tcp_listen_queue,  tcp_max_per_addr,  use_libwrap,
       tcp_client_ports, tcp_client_max_idle,  enable_krb5,  krb5_principal,  and  krb5_key_file.
       These keywords are described below.

       log_file
              This  keyword specifies the full path name to the log file where audit records will
              be stored. It must be a regular file.

       log_format
              The log format describes how the information should be stored on disk. There are  2
              options:  raw  and  nolog.   If  set  to RAW, the audit records will be stored in a
              format exactly as the kernel sends it. If this option is  set  to  NOLOG  then  all
              audit  information  is  discarded  instead  of  writing to disk. This mode does not
              affect data sent to the audit event dispatcher.

       log_group
              This keyword specifies the group that is applied to the log file's permissions. The
              default is root. The group name can be either numeric or spelled out.

       priority_boost
              This  is  a  non-negative number that tells the audit daemon how much of a priority
              boost it should take. The default is 4. No change is 0.

       flush  Valid values are none, incremental, data,  and sync.  If set to  none,  no  special
              effort  is made to flush the audit records to disk. If set to incremental, Then the
              freq parameter is used to determine how often an explicit flush to disk is  issued.
              The  data parameter tells the audit damon to keep the data portion of the disk file
              sync'd at all times. The sync option tells the audit daemon to keep both  the  data
              and meta-data fully sync'd with every write to disk.

       freq   This  is a non-negative number that tells the audit damon how many records to write
              before issuing an explicit flush to disk command. this value is only valid when the
              flush keyword is set to incremental.

       num_logs
              This  keyword  specifies  the number of log files to keep if rotate is given as the
              max_log_file_action.  If the number is < 2, logs are not rotated. This number  must
              be  99  or  less.   The default is 0 - which means no rotation. As you increase the
              number of log files being rotated, you  may  need  to  adjust  the  kernel  backlog
              setting  upwards  since  it  takes more time to rotate the files. This is typically
              done in /etc/audit/audit.rules.

       disp_qos
              This option controls  whether  you  want  blocking/lossless  or  non-blocking/lossy
              communication  between  the audit daemon and the dispatcher. There is a 128k buffer
              between the audit daemon and dispatcher. This is good enogh for most uses. If lossy
              is chosen, incoming events going to the dispatcher are discarded when this queue is
              full. (Events are still written to disk if log_format is not nolog.) Otherwise  the
              auditd daemon will wait for the queue to have an empty spot before logging to disk.
              The risk is that while the daemon is waiting for network IO, an event is not  being
              recorded to disk. Valid values are: lossy and lossless. Lossy is the default value.

       dispatcher
              The  dispatcher is a program that is started by the audit daemon when it starts up.
              It will pass a copy of all audit events to that application's stdin. Make sure  you
              trust the application that you add to this line since it runs with root privileges.

       name_format
              This  option  controls  how  computer  node names are inserted into the audit event
              stream. It has the following choices: none, hostname, fqd, numeric, and user.  None
              means that no computer name is inserted into the audit event.  hostname is the name
              returned by the gethostname syscall. The fqd means that it takes the  hostname  and
              resolves it with dns for a fully qualified domain name of that machine.  Numeric is
              similar to fqd except it resolves the IP address of the machine.  User is an  admin
              defined string from the name option. The default value is none.

       name   This  is  the  admin defined string that identifies the machine if user is given as
              the name_format option.

       max_log_file
              This keyword specifies the maximum file size  in  megabytes.  When  this  limit  is
              reached, it will trigger a configurable action. The value given must be numeric.

       max_log_file_action
              This  parameter  tells  the system what action to take when the system has detected
              that the max file size limit has been reached. Valid  values  are  ignore,  syslog,
              suspend,  rotate  and  keep_logs.  If set to ignore, the audit daemon does nothing.
              syslog means that it will issue a warning to syslog.  suspend will cause the  audit
              daemon  to  stop  writing  records to the disk. The daemon will still be alive. The
              rotate option will cause the audit daemon to rotate the logs. It  should  be  noted
              that  logs  with higher numbers are older than logs with lower numbers. This is the
              same convention used by the logrotate utility. The keep_logs option is  similar  to
              rotate  except  it does not use the num_logs setting. This prevents audit logs from
              being overwritten.

       action_mail_acct
              This option should contain a valid email address or alias. The default  address  is
              root. If the email address is not local to the machine, you must make sure you have
              email properly configured on your machine and network. Also, this  option  requires
              that /usr/lib/sendmail exists on the machine.

       space_left
              This  is a numeric value in megabytes that tells the audit daemon when to perform a
              configurable action because the system is starting to run low on disk space.

       space_left_action
              This parameter tells the system what action to take when the  system  has  detected
              that  it  is  starting  to get low on disk space.  Valid values are ignore, syslog,
              email, exec, suspend, single, and halt.  If set to ignore, the  audit  daemon  does
              nothing.  syslog means that it will issue a warning to syslog.  Email means that it
              will send a warning to the email account specified in action_mail_acct as  well  as
              sending  the  message to syslog.  exec /path-to-script will execute the script. You
              cannot pass parameters to the script.  suspend will cause the audit daemon to  stop
              writing records to the disk. The daemon will still be alive. The single option will
              cause the audit daemon to put the computer system in single user mode.  halt option
              will cause the audit daemon to shutdown the computer system.

       admin_space_left
              This  is a numeric value in megabytes that tells the audit daemon when to perform a
              configurable action because the system is running low on disk space. This should be
              considered  the  last  chance to do something before running out of disk space. The
              numeric value for this parameter should be lower than the number for space_left.

       admin_space_left_action
              This parameter tells the system what action to take when the  system  has  detected
              that  it  is  low  on  disk  space.   Valid values are ignore, syslog, email, exec,
              suspend, single, and halt.  If set  to  ignore,  the  audit  daemon  does  nothing.
              Syslog means that it will issue a warning to syslog.  Email means that it will send
              a warning to the email account specified in action_mail_acct as well as sending the
              message  to  syslog.  exec /path-to-script will execute the script. You cannot pass
              parameters to the script.  Suspend will cause the  audit  daemon  to  stop  writing
              records  to  the disk. The daemon will still be alive. The single option will cause
              the audit daemon to put the computer system in single user mode.  halt

       disk_full_action
              This parameter tells the system what action to take when the  system  has  detected
              that the partition to which log files are written has become full. Valid values are
              ignore, syslog, exec, suspend, single, and halt.   If  set  to  ignore,  the  audit
              daemon  does  nothing.   Syslog means that it will issue a warning to syslog.  exec
              /path-to-script will execute the script. You cannot pass parameters to the  script.
              Suspend will cause the audit daemon to stop writing records to the disk. The daemon
              will still be alive. The single option will cause  the  audit  daemon  to  put  the
              computer  system  in  single user mode.  halt option will cause the audit daemon to
              shutdown the computer system.

       disk_error_action
              This parameter tells the system what action to take  whenever  there  is  an  error
              detected  when  writing  audit  events  to  disk or rotating logs. Valid values are
              ignore, syslog, exec, suspend, single, and halt.   If  set  to  ignore,  the  audit
              daemon  does  nothing.   Syslog means that it will issue a warning to syslog.  exec
              /path-to-script will execute the script. You cannot pass parameters to the  script.
              Suspend will cause the audit daemon to stop writing records to the disk. The daemon
              will still be alive. The single option will cause  the  audit  daemon  to  put  the
              computer  system  in  single user mode.  halt option will cause the audit daemon to
              shutdown the computer system.

       tcp_listen_port
              This is a numeric value in the range 1..65535 which, if specified, causes auditd to
              listen  on  the  corresponding  TCP port for audit records from remote systems. The
              audit daemon may be linked with tcp_wrappers. You may want to controll access  with
              an entry in the hosts.allow and deny files.

       tcp_listen_queue
              This is a numeric value which indicates how many pending (requested but unaccepted)
              connections are allowed.  The default is 5.   Setting  this  too  small  may  cause
              connections  to  be  rejected  if too many hosts start up at exactly the same time,
              such as after a power failure.

       tcp_max_per_addr
              This is a numeric value which indicates how many concurrent connections from one IP
              address is allowed.  The default is 1 and the maximum is 16. Setting this too large
              may allow for a Denial of Service attack on the logging server. The default  should
              be  adequate  in most cases unless a custom written recovery script runs to forward
              unsent events. In this case you would increase the number only large enough to  let
              it in too.

       use_libwrap
              This  setting  determines  whether or not to use tcp_wrappers to discern connection
              attempts that are from allowed machines. Legal values are either  yes,  or  no  The
              default value is yes.

       tcp_client_ports
              This  parameter may be a single numeric value or two values separated by a dash (no
              spaces allowed).   It  indicates  which  client  ports  are  allowed  for  incoming
              connections.   If not specified, any port is allowed.  Allowed values are 1..65535.
              For example, to require the client use a priviledged port, specify 1-1023 for  this
              parameter.  You  will  also  need  to  set  the  local_port  option  in the audisp-
              remote.conf file. Making sure that  clients  send  from  a  privileged  port  is  a
              security feature to prevent log injection attacks by untrusted users.

       tcp_client_max_idle
              This  parameter  indicates the number of seconds that a client may be idle (i.e. no
              data from them at all) before auditd complains. This  is  used  to  close  inactive
              connections  if  the  client  machine  has  a  problem where it cannot shutdown the
              connection cleanly. Note that this is a global setting, and must be higher than any
              individual  client  heartbeat_timeout  setting, preferably by a factor of two.  The
              default is zero, which disables this check.

       enable_krb5
              If set to "yes", Kerberos 5 will be used for authentication  and  encryption.   The
              default is "no".

       krb5_principal
              This  is  the  principal  for  this  server.   The default is "auditd".  Given this
              default, the server will look for  a  key  named  like  auditd/hostname@EXAMPLE.COM
              stored  in  /etc/audit/audit.key  to  authenticate  itself,  where  hostname is the
              canonical name for the server's host, as  returned  by  a  DNS  lookup  of  its  IP
              address.

       krb5_key_file
              Location  of  the  key for this client's principal.  Note that the key file must be
              owned by root and mode 0400.  The default is /etc/audit/audit.key

NOTES

       In a CAPP environment, the audit trail is considered so important that  access  to  system
       resources  must  be  denied  if  an audit trail cannot be created. In this environment, it
       would be suggested that /var/log/audit be on its own partition. This  is  to  ensure  that
       space detection is accurate and that no other process comes along and consumes part of it.

       The flush parameter should be set to sync or data.

       Max_log_file  and  num_logs  need  to  be  adjusted  so  that you get complete use of your
       partition. It should be noted that the more files that have to be rotated, the  longer  it
       takes  to  get  back  to  receiving  audit  events.  Max_log_file_action  should be set to
       keep_logs.

       Space_left should be set to a number that gives the admin enough  time  to  react  to  any
       alert  message  and  perform  some maintenance to free up disk space. This would typically
       involve running the aureport -t report and moving the oldest logs to an archive area.  The
       value  of space_left is site dependent since the rate at which events are generated varies
       with each deployment. The space_left_action is recommended to be set to email. If you need
       something like an snmp trap, you can use the exec option to send one.

       Admin_space_left  should  be set to the amount of disk space on the audit partition needed
       for admin actions to be recorded. Admin_space_left_action would be set to single  so  that
       use of the machine is restricted to just the console.

       The  disk_full_action  is  triggered when no more room exists on the partition. All access
       should be terminated since no more audit capability exists. This  can  be  set  to  either
       single or halt.

       The  disk_error_action  should  be  set to syslog, single, or halt depending on your local
       policies regarding handling of hardware malfunctions.

       Specifying a single allowed client port may make it difficult for the  client  to  restart
       their  audit  subsystem,  as it will be unable to recreate a connection with the same host
       addresses and ports until the connection closure TIME_WAIT state times out.

FILES

       /etc/audit/auditd.conf
              Audit daemon configuration file

SEE ALSO

       auditd(8), audisp-remote.conf(5).

AUTHOR

       Steve Grubb