Provided by: gammu_1.31.0-1_amd64 bug

NAME

       gammurc - gammu(1) configuration file

SYNOPSIS

       On  Linux,  MacOS  X,  BSD  and  other  Unix-like  systems, the config file is searched in
       following order:

       1. $XDG_CONFIG_HOME/gammu/config

       2. ~/.config/gammu/config

       3. ~/.gammurc

       4. /etc/gammurc

       On Microsoft Windows:

       1. $PROFILE\Application Data\gammurc

       2. .\gammurc

DESCRIPTION

       Gammu requires configuration to be able to properly  talk  to  your  phone.   gammu  reads
       configuration  from  a  config file. It's location is determined on runtime, see above for
       search paths.

       You can use gammu-config or gammu-detect to generate  configuration  file  or  start  from
       Fully documented example.

       For   hints  about  configuring  your  phone,  you  can  check  Gammu  Phone  Database  <‐
       http://wammu.eu/phones/> to see what user users experienced.

       This file use ini file syntax, see ini.

       Configuration file for gammu can contain several sections - [gammu],  [gammu1],  [gammuN],
       ...  Each  section  configures one connection setup and in default mode gammu tries all of
       them in numerical order. You can also specify which configuration section to use by giving
       it's  number ([gammu] has number 0) as a parameter to gammu and it will then use only this
       section.

       [gammu]

       This section is read by default unless you specify other on command line.

   Device connection parameters
       Connection
              Protocol which will be used to talk to your phone.

              For Nokia cables you want to use one of following:

              fbus   serial FBUS connection

              dlr3   DLR-3 and compatible cables

              dku2   DKU-2 and compatible cables

              dku5   DKU-5 and compatible cables

              mbus   serial MBUS connection

              If you use some non original cable, you  might  need  to  append  -nodtr  (eg.  for
              ARK3116  based  cables)  or  -nopower,  but  Gammu  should  be  able to detect this
              automatically.

              For non-Nokia phones connected using cable you generally want:

              at     generic AT commands based connection

              You can optionally specify speed of the connection, eg.  at19200,  but  it  is  not
              needed for modern USB cables.

              For IrDA connections use one of following:

              irdaphonet
                     Phonet connection for Nokia phones.

              irdaat AT commands connection for most of phones (this is not supported on Linux).

              irdaobex
                     OBEX (IrMC or file transfer) connection for most of phones.

              irdagnapbus
                     GNapplet based connection for Symbian phones, see gnapplet.

              For Bluetooth connection use one of following:

              bluephonet
                     Phonet connection for Nokia phones.

              blueat AT commands connection for most of phones.

              blueobex
                     OBEX (IrMC or file transfer) connection for most of phones.

              bluerfgnapbus
                     GNapplet based connection for Symbian phones, see gnapplet.

              blues60
                     Connection to Series60 applet in S60 phones, see s60.

                     New in version 1.29.90.

       See also

              faq-config

       Device New in version 1.27.95.

              Device node or address of phone. It depends on used connection.

              For cables or emulated serial ports, you enter device name (for example /dev/ttyS0,
              /dev/ttyACM0, /dev/ircomm0, /dev/rfcomm0 on Linux, /dev/cuad0 on FreeBSD  or  COM1:
              on Windows). The special exception are DKU-2 and DKU-5 cables on Windows, where the
              device is automatically detected from driver information  and  this  parameters  is
              ignored.

              For  USB connections (currently only fbususb and dku2 on Linux), you can specify to
              which USB device Gammu should connect. You can either provide vendor/product IDs or
              device address on USB:

              Device = 0x1234:0x5678  # Match device by vendor and product id
              Device = 0x1234:-1      # Match device by vendor id
              Device = 1.10           # Match device by usb bus and device address
              Device = 10             # Match device by usb device address
              Device = serial:123456  # Match device by serial string

       Note   On Linux systems, you might lack permissions for some device nodes.  You might need
              to be member of some group (eg. plugdev or dialout) or or add special udev rules to
              enable you access these devices as non-root.

              For  Nokia  phones  you  can  put  follofing  file  (also  available  in sources as
              contrib/udev/45-nokiadku2.rules) as /etc/udev/rules.d/45-nokiadku2.rules:

              # udev rules file for nokia dku2 devices (udev >= 0.98)
              # Put it to /etc/udev/rules.d/ directory
              # Taken from http://git.savannah.gnu.org/cgit/gnokii.git/tree/Docs/sample/45-nokiadku2.rules
              #

              ACTION!="add", GOTO="nokiadku2_rules_end"
              SUBSYSTEM=="usb", GOTO="nokiadku2_rules"
              # This one is for the old kernels
              SUBSYSTEM=="usb_device", GOTO="nokiadku2_rules"
              GOTO="nokiadku2_rules_end"

              LABEL="nokiadku2_rules"
              ATTRS{manufacturer}=="Nokia", MODE="0660", GROUP="plugdev"

              LABEL="nokiadku2_rules_end"

       In case your USB device appears as the serial port in the  system  (eg.   /dev/ttyACM0  on
       Linux or COM5: on Windows), just use same setup as with serial port.

       For  Bluetooth  connection you have to enter Bluetooth address of your phone (you can list
       Bluetooth devices in range on Linux using hcitool scan command). Optionally you  can  also
       force Gammu to use specified channel by including channel number after slash.

       Before  using  Gammu, your device should be paired with computer or you should have set up
       automatic pairing.

       For IrDA connections, this parameters is not used at all.

       If IrDA does not work on Linux, you might need  to  bring  up  the  interface  and  enable
       discovery (you need to run these commands as root):

       ip l s dev irda0 up          # Enables irda0 device
       sysctl net.irda.discovery=1  # Enables device discovery on IrDA

       Note   Native IrDA is not supported on Linux, you need to setup virtual serial port for it
              (eg. /dev/ircomm0) and use it same way as cable.  This can be usually  achieved  by
              loading modules ircomm-tty and irtty-sir:

              modprobe ircomm-tty
              modprobe irtty-sir

       See also

              faq-config

       Port   Deprecated since version 1.27.95.

              Alias for Device, kept for backward compatibility.

       Model  Do  not use this parameter unless really needed! The only use case for this is when
              Gammu does not know your phone and misdetects it's features.

              The only special case for using model is to force special type of  OBEX  connection
              instead of letting Gammu try the best suited for selected operation:

              obexfs force using of file browsing service (file system support)

              obexirmc
                     force using of IrMC service (contacts, calendar and notes support)

              obexnone
                     none  service  chosen,  this  has  only  limited use for sending file (gammu
                     sendfile command)

              mobex  m-obex service for Samsung phones

       Use_Locking
              On Posix systems, you might want to lock serial device when it is being used  using
              UUCP-style  lock files. Enabling this option (setting to yes) will make Gammu honor
              these locks and create it on startup. On most  distributions  you  need  additional
              privileges to use locking (eg. you need to be member of uucp group).

              This option has no meaning on Windows.

   Connection options
       SynchronizeTime
              If you want to set time from computer to phone during starting connection.

       StartInfo
              This  option  allow to set, that you want (setting yes) to see message on the phone
              screen or phone should enable light for a moment during starting connection.  Phone
              will  not  beep  during  starting connection with this option. This works only with
              some Nokia phones.

   Debugging options
       LogFile
              Path to file where information about communication will be stored.

       Note   For most debug levels (excluding errors)  the  log  file  is  overwritten  on  each
              execution.

       LogFormat
              Determines what all will be logged to LogFile. Possible values are:

              nothing
                     no debug level

              text   transmission dump in text format

              textall
                     all possible info in text format

              textalldate
                     all possible info in text format, with time stamp

              errors errors in text format

              errorsdate
                     errors in text format, with time stamp

              binary transmission dump in binary format

              For debugging use either textalldate or textall, it contains all needed information
              to diagnose problems.

       Features
              Custom features for phone. This can be  used  as  override  when  values  coded  in
              common/gsmphones.c  are  bad  or missing. Consult include/gammu-info.h for possible
              values (all GSM_Feature values without leading F_ prefix).  Please  report  correct
              values to Gammu authors.

   Locales and character set options
       GammuCoding
              Forces  using  specified  codepage (for example 1250 will force CP-1250 or utf8 for
              UTF-8). This should not be needed, Gammu detects it according to your locales.

       GammuLoc
              Path  to  directory  with  localisation  files  (the   directory   should   contain
              LANG/LC_MESSAGES/gammu.mo).  If  gammu  is  properly installed it should find these
              files automatically.

   Other options
       DataPath
              Additional path where to search for data files. The default path is  configured  on
              build time (and defaults to /usr/share/data/gammu on Unix systems). Currently it is
              used only for searching files to upload to phone using gammu install.

EXAMPLES

       There is more complete example available in Gammu documentation, see gammu.

   Connection examples
       Gammu configuration for Nokia phone using DLR-3 cable:

       [gammu]
       device = /dev/ttyACM0
       connection = dlr3

       Gammu configuration for Sony-Ericsson phone (or any other AT compatible  phone)  connected
       using USB cable:

       [gammu]
       device = /dev/ttyACM0
       connection = at

       Gammu  configuration  for Sony-Ericsson (or any other AT compatible phone) connected using
       bluetooth:

       [gammu]
       device = B0:0B:00:00:FA:CE
       connection = blueat

       Gammu configuration for phone which needs to manually  adjust  Bluetooth  channel  to  use
       channel 42:

       [gammu]
       device = B0:0B:00:00:FA:CE/42
       connection = blueat

   Working with multiple phones
       Gammu  can  be  configured for multiple phones (however only one connection is used at one
       time, you can choose which one to use with gammu -s parameter). Configuration  for  phones
       on three serial ports would look like following:

       [gammu]
       device = /dev/ttyS0
       connection = at

       [gammmu1]
       device = /dev/ttyS1
       connection = at

       [gammmu2]
       device = /dev/ttyS2
       connection = at

   Fully documented example
       You can find this sample file as docs/config/gammurc in Gammu sources.

       ; This is a sample ~/.gammurc file.
       ; In Unix/Linux  copy it into your home directory and name it .gammurc
       ;                or into /etc and name it gammurc
       ; In Win32       copy it into directory with Gammu.exe and name gammurc
       ; More about parameters later
       ; Anything behind ; or # is comment.
       ; -----------------------------------------------------------------------------

       [gammu]

       device = com8:
       connection = irdaphonet
       ; Do not use model configuration unless you really need it
       ;model = 6110
       ;synchronizetime = yes
       ;logfile = gammulog
       ;logformat = textall
       ;use_locking = yes
       ;gammuloc = locfile
       ;startinfo = yes
       ;gammucoding = utf8
       ;usephonedb = yes

       [gammu1]

       device = com8:
       ;model = 6110
       connection = fbusblue
       ;synchronizetime = yes
       ;logfile = gammulog
       ;logformat = textall
       ;use_locking = yes
       ;gammuloc = locfile
       ;startinfo = yes
       ;gammucoding = utf8

       ; Step 1. Please find required Connection parameter and look into assigned
       ; with it device type. With some Connection you must set concrete model

       ; ================================================================ cables =====
       ; New Nokia protocol for FBUS/DAU9P
       ;    Connection "fbus", device type serial
       ; New Nokia protocol for DLR3/DLR3P
       ;    Connection "fbusdlr3"/"dlr3", device type serial
       ; New Nokia protocol for DKU2 (and phone with USB converter on phone mainboard
       ;                              like 6230)
       ;    Connection "dku2phonet"/"dku2", device type dku2 on Windows
       ;    Connection "fbususb" on Linux
       ; New Nokia protocol for DKU5 (and phone without USB converter on phone
       ;                              mainboard like 5100)
       ;    Connection "dku5fbus"/"dku5", device type dku5
       ; New Nokia protocol for PL2303 USB cable (and phone without USB converter
       ;                                          on phone mainboard like 5100)
       ;    Connection "fbuspl2303", device type usb
       ; Old Nokia protocol for MBUS/DAU9P
       ;    Connection "mbus", device type serial
       ; Variants:
       ; You can modify a bit behaviour of connection using additional flags
       ; specified just after connection name like connection-variant.
       ; If you're using ARK3116 cable (or any other which does not like dtr
       ; handling), you might need -nodtr variant of connection, eg. dlr3-nodtr.
       ; If cable you use is not powered over DTR/RTS, try using -nopower variant of
       ; connection, eg. fbus-nopower.
       ; -----------------------------------------------------------------------------
       ; AT commands for DLR3, DKU5 or other AT compatible cable (8 bits, None
       ; parity, no flow control, 1 stop bit). Used with Nokia, Alcatel, Siemens, etc.
       ;    Connection "at19200"/"at115200"/.., device type serial
       ; AT commands for DKU2 cable
       ;    Connection "dku2at", device type dku2
       ; ============================================================== infrared =====
       ; Nokia protocol for infrared with Nokia 6110/6130/6150
       ;    Connection "fbusirda"/"infrared", device type serial
       ; Nokia protocol for infrared with other Nokia models
       ;    Connection "irdaphonet"/"irda", device type irda
       ; -----------------------------------------------------------------------------
       ; AT commands for infrared. Used with Nokia, Alcatel, Siemens, etc.
       ;    Connection "irdaat", device type irda
       ; -----------------------------------------------------------------------------
       ; OBEX for infrared
       ;    Connection "irdaobex", device type irda.
       ; ============================================================= Bluetooth =====
       ; Nokia protocol with serial device set in BT stack (WidComm, other) from
       ; adequate service and Nokia 6210
       ;    Connection "fbusblue", device type serial
       ; Nokia protocol with serial device set in BT stack (WidComm, other) from
       ; adequate service and other Nokia models
       ;    Connection "phonetblue", device type serial
       ; -----------------------------------------------------------------------------
       ; Nokia protocol for Bluetooth stack with Nokia 6210
       ;    Connection "bluerffbus", device type BT
       ; Nokia protocol for Bluetooth stack with DCT4 Nokia models, which don't inform
       ; about services correctly (6310, 6310i with firmware lower than 5.50, 8910,..)
       ;    Connection "bluerfphonet", device type BT
       ; Nokia protocol for Bluetooth stack with other DCT4 Nokia models
       ;    Connection "bluephonet", device type BT
       ; -----------------------------------------------------------------------------
       ; AT commands for Bluetooth stack and 6210 / DCT4 Nokia models, which don't
       ; inform about BT services correctly (6310, 6310i with firmware lower
       ; than 5.50, 8910,..)
       ;    Connection "bluerfat", device type BT
       ; AT commands for Bluetooth stack with other phones (Siemens, other Nokia,etc.)
       ;    Connection "blueat", device type BT
       ; -----------------------------------------------------------------------------
       ; OBEX for Bluetooth stack with DCT4 Nokia models, which don't inform about
       ; BT services correctly (6310, 6310i with firmware lower than 5.50, 8910,...)
       ;    Connection "bluerfobex", device type BT
       ; OBEX for Bluetooth stack with other phones (Siemens, other Nokia, etc.)
       ;    Connection "blueobex", device type BT.
       ; -----------------------------------------------------------------------------
       ;    Connection "bluerfgnapbus", device type BT, model "gnap"
       ;    Connection "irdagnapbus", device type irda, model "gnap"

       ; Step2. According to device type from Step1 and used OS set Port parameter

       ; -----------------------------------------------------------------------------
       ; Port type | "Port" parameter in Windows/DOS | "Port" parameter in Linux/Unix
       ; ----------|---------------------------------|--------------------------------
       ; serial    | "com*:"                         | "/dev/ttyS*"
       ;           | (example "com1:")               | (example "/dev/ttyS1")
       ;           |                                 | or "/dev/tts/**" (with DevFS)
       ;           |                                 | virtual serial ports like
       ;           |                                 | "/dev/ircomm*" or "/dev/rfcomm*"
       ; ----------|---------------------------------|--------------------------------
       ; irda      | ignored (can be empty)          | ignored (can be empty)
       ; ----------|---------------------------------|--------------------------------
       ; BT        | Bluetooth device address (example "00:11:22:33:44:55").
       ;           | Optionally you can also include channel after slash
       ;           | (example "00:11:22:33:44:55/12"). Can be also empty.
       ; ----------|---------------------------------|--------------------------------
       ; dku2      | ignored (can be empty)          | /dev/ttyUSB* or /dev/ttyACM*
       ; ----------|---------------------------------|--------------------------------
       ; dku5      | ignored (can be empty)          | connection with it not possible
       ; ----------|---------------------------------|--------------------------------
       ; usb       | connection with it not possible | "/dev/ttyUSB*"

       ; Step3. Set other config parameters

       ; -----------------------------------------------------------------------------
       ; Parameter name  | Description
       ; ----------------|------------------------------------------------------------
       ; Model           | Should not be used unless you have a good reason to do so.
       ;                 | If Gammu doesn't recognize your phone model, put it here.
       ;                 | Example values: "6110", "6150", "6210", "8210"
       ; SynchronizeTime | if you want to set time from computer to phone during
       ;                 | starting connection. Do not rather use this option when
       ;                 | when to reset phone during connection (in some phones need
       ;                 | to set time again after restart)
       ; GammuLoc        | name of localisation file
       ; StartInfo       | this option allow to set, that you want (setting "yes")
       ;                 | to see message on the phone screen or phone should enable
       ;                 | light for a moment during starting connection. Phone
       ;                 | WON'T beep during starting connection with this option.
       ; GammuCoding     | forces using specified codepage (in win32 - for example
       ;                 | "1250" will force CP1250) or UTF8 (in Linux - "utf8")
       ; ----------------|------------------------------------------------------------
       ; Logfile         | Use, when want to have logfile from communication.
       ; Logformat       | What debug info and format should be used:
       ;                 |   "nothing" - no debug level (default)
       ;                 |   "text"    - transmission dump in text format
       ;                 |   "textall" - all possible info in text format
       ;                 |   "errors"  - errors in text format
       ;                 |   "binary"  - transmission dump in binary format
       ; ----------------|------------------------------------------------------------
       ; Features        | Custom features for phone. This can be used as override
       ;                 | when values coded in common/gsmphones.c are bad or
       ;                 | missing. Consult include/gammu-info.h for possible values
       ;                 | (all Feature values without leading F_ prefix).
       ;                 | Please report correct values to Gammu authors.
       ; ----------------|------------------------------------------------------------
       ; Use_Locking     | under Unix/Linux use "yes", if want to lock used device
       ;                 | to prevent using it by other applications. In win32 ignored

       ; vim: et ts=4 sw=4 sts=4 tw=78 spell spelllang=en_us

AUTHOR

       Michal Čihař <michal@cihar.com>

COPYRIGHT

       2009-2011, Michal Čihař <michal@cihar.com>