Provided by: srecord_1.56-1build1_i386
srec_needham - Needham EMP‐series programmer ASCII file format
This format is understood by Needham Electronics' EMP‐series
programmers. See www.needhams.com/winman.pdf for more information.
(This format is very similar to the ASCII‐Hex format, but without the
^B and ^C guard characters.)
Each data byte is represented as 2 hexadecimal characters, and is
separated by white space from all other data bytes.
The address for data bytes is set by using a sequence of $Annnn,
characters, where nnnn is the 8‐character ascii representation of the
address. The comma is required. There is no need for an address
record unless there are gaps. Implicitly, the file starts a address 0
if no address is set before the first data byte.
In general, binary data will expand in sized by approximately 3.0 times
when represented with this format.
Here is an example ascii‐hex file. It contains the data “Hello,
World[rq] to be loaded at address 0x1000.
48 65 6C 6C 6F 2C 20 57 6F 72 6C 64 0A
srec_cat version 1.56
Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
2007, 2008, 2009, 2010 Peter Miller
The srec_cat program comes with ABSOLUTELY NO WARRANTY; for details use
the 'srec_cat -VERSion License' command. This is free software and you
are welcome to redistribute it under certain conditions; for details
use the 'srec_cat -VERSion License' command.
Peter Miller E‐Mail: email@example.com
/\/\* WWW: http://miller.emu.id.au/pmiller/