Provided by: srecord_1.56-1build1_i386
srec_ti_txt - Texas Instruments ti‐txt (MSP430) file format
The ti‐TXT format is used by the Texas Instruments MSP430 familty
The TI‐TXT hex format supports 16‐bit hexadecimal data. It consists of
one or more sections, followed by the end‐of‐file indicator.
Each section consistes of an at (@) sign followed a execution start
address (in hexadecimal), and newline, and then data bytes (in
hexadecimal). The section address is followed by a newline. There are
to be 16 data bytes per line, except for the last line in a section.
The end‐of‐file indicator is the letter q followed by a newline. The
end‐of‐file indicator mandatory.
In general, binary data will expand in sized by approximately 3.0 times
when represented with this format.
Here is an example ti‐txt file taken from the reference below:
31 40 00 03 B2 40 80 5A 20 01 D2 D3 22 00 D2 E3
21 00 3F 40 E8 FD 1F 83 FE 23 F9 3F
http://www.ti.com/lit/pdf/slau101, section A.2. Note: the portion
which says addresses must be even, and the number of data bytes in a
section must be even, is wrong.
srec_ti_txt version 1.56
Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
2007, 2008, 2009, 2010 Peter Miller
The srec_ti_txt program comes with ABSOLUTELY NO WARRANTY; for details
use the 'srec_ti_txt -VERSion License' command. This is free software
and you are welcome to redistribute it under certain conditions; for
details use the 'srec_ti_txt -VERSion License' command.
Peter Miller E‐Mail: firstname.lastname@example.org
/\/\* WWW: http://miller.emu.id.au/pmiller/