Provided by: xpdf_3.02-21build1_amd64
xpdfrc - configuration file for Xpdf tools (version 3.02)
All of the Xpdf tools read a single configuration file. If you have a .xpdfrc file in your home directory, it will be read. Otherwise, a system-wide configuration file will be read from /etc/xpdf/xpdfrc, if it exists. (This is its default location; depending on build options, it may be placed elsewhere.) On Win32 systems, the xpdfrc file should be placed in the same directory as the executables. The xpdfrc file consists of a series of configuration options, one per line. Blank lines and lines starting with a ´#' (comments) are ignored. The following sections list all of the configuration options, sorted into functional groups. There is an examples section at the end. Note that all settings are case-sensitive; in particular, boolean options are "yes" and "no" (rather than "Yes" or "No").
include config-file Includes the specified config file. The effect of this is equivalent to inserting the contents of config-file directly into the parent config file in place of the include command. Config files can be nested arbitrarily deeply.
nameToUnicode map-file Specifies a file with the mapping from character names to Unicode. This is used to handle PDF fonts that have valid encodings but no ToUnicode entry. Each line of a nameToUnicode file looks like this: hex-string name The hex-string is the Unicode (UCS-2) character index, and name is the corresponding character name. Multiple nameToUnicode files can be used; if a character name is given more than once, the code in the last specified file is used. There is a built-in default nameToUnicode table with all of Adobe's standard character names. cidToUnicode registry-ordering map-file Specifies the file with the mapping from character collection to Unicode. Each line of a cidToUnicode file represents one character: hex-string The hex-string is the Unicode (UCS-2) index for that character. The first line maps CID 0, the second line CID 1, etc. File size is determined by size of the character collection. Only one file is allowed per character collection; the last specified file is used. There are no built-in cidToUnicode mappings. unicodeToUnicode font-name-substring map-file This is used to work around PDF fonts which have incorrect Unicode information. It specifies a file which maps from the given (incorrect) Unicode indexes to the correct ones. The mapping will be used for any font whose name contains font-name-substring. Each line of a unicodeToUnicode file represents one Unicode character: in-hex out-hex1 out-hex2 ... The in-hex field is an input (incorrect) Unicode index, and the rest of the fields are one or more output (correct) Unicode indexes. Each occurrence of in-hex will be converted to the specified output sequence. unicodeMap encoding-name map-file Specifies the file with mapping from Unicode to encoding-name. These encodings are used for X display fonts and text output (see below). Each line of a unicodeMap file represents a range of one or more Unicode characters which maps linearly to a range in the output encoding: in-start-hex in-end-hex out-start-hex Entries for single characters can be abbreviated to: in-hex out-hex The in-start-hex and in-end-hex fields (or the single in-hex field) specify the Unicode range. The out-start-hex field (or the out-hex field) specifies the start of the output encoding range. The length of the out-start-hex (or out-hex) string determines the length of the output characters (e.g., UTF-8 uses different numbers of bytes to represent characters in different ranges). Entries must be given in increasing Unicode order. Only one file is allowed per encoding; the last specified file is used. The Latin1, ASCII7, Symbol, ZapfDingbats, UTF-8, and UCS-2 encodings are predefined. cMapDir registry-ordering dir Specifies a search directory, dir, for CMaps for the registry-ordering character collection. There can be multiple directories for a particular collection. There are no default CMap directories. toUnicodeDir dir Specifies a search directory, dir, for ToUnicode CMaps. There can be multiple ToUnicode directories. There are no default ToUnicode directories.
displayFontT1 PDF-font-name T1-file Maps a PDF font, PDF-font-name, to a Type 1 font for display. The Type 1 font file, T1-file, should be a standard .pfa or .pfb file. displayFontTT PDF-font-name TT-file Maps a PDF font, PDF-font-name, to a TrueType font for display. The TrueType font file, TT-file, should be a standard .ttf file. displayNamedCIDFontT1 PDF-font-name T1-file Maps a specific PDF CID (16-bit) font, PDF-font-name, to a CID font (16-bit PostScript font), for display. There are no default CID font mappings. displayCIDFontT1 registry-ordering T1-file Maps the registry-ordering character collection to a CID font (16-bit PostScript font), for display. This mapping is used if the font name doesn't match any of the fonts declared with displayNamedCIDFont* commands. There are no default CID font mappings. displayNamedCIDFontTT PDF-font-name TT-file Maps a specific PDF CID (16-bit) font, PDF-font-name, to a (16-bit) TrueType font, for display. There are no default CID font mappings. displayCIDFontTT registry-ordering TT-file Maps the registry-ordering character collection to a (16-bit) TrueType font, for display. This mapping is used if the font name doesn't match any of the fonts declared with displayNamedCIDFont* commands. There are no default CID font mappings. fontDir dir Specifies a search directory for external font files. There can be multiple fontDir directories. If a PDF file uses a font but doesn't embed it, these directories will be searched for a matching font file. These fonts are used by both xpdf (for display) and pdftops (for embedding in the generated PostScript). Type 1 fonts must have a suffix of ".pfa", ".pfb", ".ps", or no suffix at all. TrueType fonts must have a ".ttf" suffix. Other files in these directories will be ignored. There are no default fontDir directories.
psPaperSize width(pts) height(pts) Sets the paper size for PostScript output. The width and height parameters give the paper size in PostScript points (1 point = 1/72 inch). psPaperSize letter | legal | A4 | A3 | match Sets the paper size for PostScript output to a standard size. The default paper size is set when xpdf and pdftops are built, typically to "letter" or "A4". This can also be set to "match", which will set the paper size to match the size specified in the PDF file. psImageableArea llx lly urx ury Sets the imageable area for PostScript output. The four integers are the coordinates of the lower-left and upper-right corners of the imageable region, specified in points (with the origin being the lower-left corner of the paper). This defaults to the full paper size; the psPaperSize option will reset the imageable area coordinates. psCrop yes | no If set to "yes", PostScript output is cropped to the CropBox specified in the PDF file; otherwise no cropping is done. This defaults to "yes". psExpandSmaller yes | no If set to "yes", PDF pages smaller than the PostScript imageable area are expanded to fill the imageable area. Otherwise, no scalling is done on smaller pages. This defaults to "no". psShrinkLarger yes | no If set to yes, PDF pages larger than the PostScript imageable area are shrunk to fit the imageable area. Otherwise, no scaling is done on larger pages. This defaults to "yes". psCenter yes | no If set to yes, PDF pages smaller than the PostScript imageable area (after any scaling) are centered in the imageable area. Otherwise, they are aligned at the lower-left corner of the imageable area. This defaults to "yes". psDuplex yes | no If set to "yes", the generated PostScript will set the "Duplex" pagedevice entry. This tells duplex-capable printers to enable duplexing. This defaults to "no". psLevel level1 | level1sep | level2 | level2sep | level3 | level3Sep Sets the PostScript level to generate. This defaults to "level2". psFont PDF-font-name PS-font-name When the PDF-font-name font is used in a PDF file, it will be translated to the PostScript font PS-font-name, which is assumed to be resident in the printer. Typically, PDF-font-name and PS-font-name are the same. By default, only the Base-14 fonts are assumed to be resident. psNamedFont16 PDF-font-name wMode PS-font-name encoding When the 16-bit font PDF-font-name is used in a PDF file with the wMode writing mode and is not embedded, the PS-font-name font is substituted for it. The writing mode must be either ´H' for horizontal or ´V' for vertical. The PS-font-name font is assumed to be resident in the printer and to use the specified encoding (which must have been defined with the unicodeMap command). psFont16 registry-ordering wMode PS-font-name encoding When a 16-bit font using the registry-ordering character collection and wMode writing mode is not embedded and does not match any of the fonts declared in psNamedFont16 commands, the PS-font-name font is substituted for it. The writing mode must be either ´H' for horizontal or ´V' for vertical. The PS-font-name font is assumed to be resident in the printer and to use the specified writing mode and encoding (which must have been defined with the unicodeMap command). psEmbedType1Fonts yes | no If set to "no", prevents embedding of Type 1 fonts in generated PostScript. This defaults to "yes". psEmbedTrueTypeFonts yes | no If set to "no", prevents embedding of TrueType fonts in generated PostScript. This defaults to "yes". psEmbedCIDTrueTypeFonts yes | no If set to "no", prevents embedding of CID TrueType fonts in generated PostScript. For Level 3 PostScript, this generates a CID font, for lower levels it generates a non-CID composite font. psEmbedCIDPostScriptFonts yes | no If set to "no", prevents embedding of CID PostScript fonts in generated PostScript. For Level 3 PostScript, this generates a CID font, for lower levels it generates a non-CID composite font. psPreload yes | no If set to "yes", PDF forms are converted to PS procedures, and image data is preloaded. This uses more memory in the PostScript interpreter, but generates significantly smaller PS files in situations where, e.g., the same image is drawn on every page of a long document. This defaults to "no". psOPI yes | no If set to "yes", generates PostScript OPI comments for all images and forms which have OPI information. This option is only available if the Xpdf tools were compiled with OPI support. This defaults to "no". psASCIIHex yes | no If set to "yes", the ASCIIHexEncode filter will be used instead of ASCII85Encode for binary data. This defaults to "no". psFile file-or-command Sets the default PostScript file or print command for xpdf. Commands start with a ´|' character; anything else is a file. If the file name or command contains spaces it must be quoted. This defaults to unset, which tells xpdf to generate a name of the form <file>.ps for a PDF file <file>.pdf. fontDir dir See the description above, in the DISPLAY FONTS section.
textEncoding encoding-name Sets the encoding to use for text output. (This can be overridden with the "-enc" switch on the command line.) The encoding-name must be defined with the unicodeMap command (see above). This defaults to "Latin1". textEOL unix | dos | mac Sets the end-of-line convention to use for text output. The options are: unix = LF dos = CR+LF mac = CR (This can be overridden with the "-eol" switch on the command line.) The default value is based on the OS where xpdf and pdftotext were built. textPageBreaks yes | no If set to "yes", text extraction will insert page breaks (form feed characters) between pages. This defaults to "yes". textKeepTinyChars yes | no If set to "yes", text extraction will keep all characters. If set to "no", text extraction will discard tiny (smaller than 3 point) characters after the first 50000 per page, avoiding extremely slow run times for PDF files that use special fonts to do shading or cross-hatching. This defaults to "no".
initialZoom percentage | page | width | height Sets the initial zoom factor. A number specifies a zoom percentage, where 100 means 72 dpi. You may also specify ´page', to fit the page to the window size, ´width', to fit the page width to the window width, or ´height', to fit the page height to the window height. continuousView yes | no If set to "yes", xpdf will start in continuous view mode, i.e., with one vertical screoll bar for the whole document. This defaults to "no". enableT1lib yes | no Enables or disables use of t1lib (a Type 1 font rasterizer). This is only relevant if the Xpdf tools were built with t1lib support. ("enableT1lib" replaces the old "t1libControl" option.) This option defaults to "yes". enableFreeType yes | no Enables or disables use of FreeType (a TrueType / Type 1 font rasterizer). This is only relevant if the Xpdf tools were built with FreeType support. ("enableFreeType" replaces the old "freetypeControl" option.) This option defaults to "yes". antialias yes | no Enables or disables font anti-aliasing in the PDF rasterizer. This option affects all font rasterizers. ("antialias" replaces the anti-aliasing control provided by the old "t1libControl" and "freetypeControl" options.) This default to "yes". vectorAntialias yes | no Enables or disables anti-aliasing of vector graphics in the PDF rasterizer. This defaults to "yes". strokeAdjust yes | no Enables or disables stroke adjustment. This defaults to "yes". screenType dispersed | clustered | stochasticClustered Sets the halftone screen type, which will be used when generating a monochrome (1-bit) bitmap. The three options are dispersed-dot dithering, clustered-dot dithering (with a round dot and 45-degree screen angle), and stochastic clustered- dot dithering. By default, "stochasticClustered" is used for resolutions of 300 dpi and higher, and "dispersed" is used for resolutions lower then 300 dpi. screenSize integer Sets the size of the (square) halftone screen threshold matrix. By default, this is 4 for dispersed-dot dithering, 10 for clustered-dot dithering, and 100 for stochastic clustered-dot dithering. screenDotRadius integer Sets the halftone screen dot radius. This is only used when screenType is set to stochasticClustered, and it defaults to 2. In clustered-dot mode, the dot radius is half of the screen size. Dispersed-dot dithering doesn't have a dot radius. screenGamma float Sets the halftone screen gamma correction parameter. Gamma values greater than 1 make the output brighter; gamma values less than 1 make it darker. The default value is 1. screenBlackThreshold float When halftoning, all values below this threshold are forced to solid black. This parameter is a floating point value between 0 (black) and 1 (white). The default value is 0. screenWhiteThreshold float When halftoning, all values above this threshold are forced to solid white. This parameter is a floating point value between 0 (black) and 1 (white). The default value is 1. urlCommand command Sets the command executed when you click on a URL link. The string "%s" will be replaced with the URL. (See the example below.) This has no default value. movieCommand command Sets the command executed when you click on a movie annotation. The string "%s" will be replaced with the movie file name. This has no default value. mapNumericCharNames yes | no If set to "yes", the Xpdf tools will attempt to map various numeric character names sometimes used in font subsets. In some cases this leads to usable text, and in other cases it leads to gibberish -- there is no way for Xpdf to tell. This defaults to "yes". mapUnknownCharNames yes | no If set to "yes", and mapNumericCharNames is set to "no", the Xpdf tools will apply a simple pass-through mapping (Unicode index = character code) for all unrecognized glyph names. In some cases, this leads to usable text, and in other cases it leads to gibberish -- there is no way for Xpdf to tell. This defaults to "no". bind modifiers-key context command ... Add a key or mouse button binding. Modifiers can be zero or more of: shift- ctrl- alt- Key can be a regular ASCII character, or any one of: space tab return enter backspace insert delete home end pgup pgdn left / right / up / down (arrow keys) f1 .. f35 (function keys) mousePress1 .. mousePress7 (mouse buttons) mouseRelease1 .. mouseRelease7 (mouse buttons) Context is either "any" or a comma-separated combination of: fullScreen / window (full screen mode on/off) continuous / singlePage (continuous mode on/off) overLink / offLink (mouse over link or not) scrLockOn / scrLockOff (scroll lock on/off) The context string can include only one of each pair in the above list. Command is an Xpdf command (see the COMMANDS section of the xpdf(1) man page for details). Multiple commands are separated by whitespace. The bind command replaces any existing binding, but only if it was defined for the exact same modifiers, key, and context. All tokens (modifiers, key, context, commands) are case-sensitive. Example key bindings: # bind ctrl-a in any context to the nextPage # command bind ctrl-a any nextPage # bind uppercase B, when in continuous mode # with scroll lock on, to the reload command # followed by the prevPage command bind B continuous,scrLockOn reload prevPage See the xpdf(1) man page for more examples. unbind modifiers-key context Removes a key binding established with the bind command. This is most useful to remove default key bindings before establishing new ones (e.g., if the default key binding is given for "any" context, and you want to create new key bindings for multiple contexts). printCommands yes | no If set to "yes", drawing commands are printed as they're executed (useful for debugging). This defaults to "no". errQuiet yes | no If set to "yes", this suppresses all error and warning messages from all of the Xpdf tools. This defaults to "no".
The following is a sample xpdfrc file. # from the Thai support package nameToUnicode /usr/local/share/xpdf/Thai.nameToUnicode # from the Japanese support package cidToUnicode Adobe-Japan1 /usr/local/share/xpdf/Adobe-Japan1.cidToUnicode unicodeMap JISX0208 /usr/local/share/xpdf/JISX0208.unicodeMap cMapDir Adobe-Japan1 /usr/local/share/xpdf/cmap/Adobe-Japan1 # use the Base-14 Type 1 fonts from ghostscript displayFontT1 Times-Roman /usr/local/share/ghostscript/fonts/n021003l.pfb displayFontT1 Times-Italic /usr/local/share/ghostscript/fonts/n021023l.pfb displayFontT1 Times-Bold /usr/local/share/ghostscript/fonts/n021004l.pfb displayFontT1 Times-BoldItalic /usr/local/share/ghostscript/fonts/n021024l.pfb displayFontT1 Helvetica /usr/local/share/ghostscript/fonts/n019003l.pfb displayFontT1 Helvetica-Oblique /usr/local/share/ghostscript/fonts/n019023l.pfb displayFontT1 Helvetica-Bold /usr/local/share/ghostscript/fonts/n019004l.pfb displayFontT1 Helvetica-BoldOblique /usr/local/share/ghostscript/fonts/n019024l.pfb displayFontT1 Courier /usr/local/share/ghostscript/fonts/n022003l.pfb displayFontT1 Courier-Oblique /usr/local/share/ghostscript/fonts/n022023l.pfb displayFontT1 Courier-Bold /usr/local/share/ghostscript/fonts/n022004l.pfb displayFontT1 Courier-BoldOblique /usr/local/share/ghostscript/fonts/n022024l.pfb displayFontT1 Symbol /usr/local/share/ghostscript/fonts/s050000l.pfb displayFontT1 ZapfDingbats /usr/local/share/ghostscript/fonts/d050000l.pfb # use the Bakoma Type 1 fonts # (this assumes they happen to be installed in /usr/local/fonts/bakoma) fontDir /usr/local/fonts/bakoma # set some PostScript options psPaperSize letter psDuplex no psLevel level2 psEmbedType1Fonts yes psEmbedTrueTypeFonts yes psFile "| lpr -Pprinter5" # assume that the PostScript printer has the Univers and # Univers-Bold fonts psFont Univers Univers psFont Univers-Bold Univers-Bold # set the text output options textEncoding UTF-8 textEOL unix # misc options t1libControl low freetypeControl low urlCommand "netscape -remote 'openURL(%s)'"
/etc/xpdf/xpdfrc This is the default location for the system-wide configuration file. Depending on build options, it may be placed elsewhere. $HOME/.xpdfrc This is the user's configuration file. If it exists, it will be read in place of the system-wide file.
The Xpdf software and documentation are copyright 1996-2007 Glyph & Cog, LLC.