Provided by: manpages_3.35-0.1ubuntu1_all
cpuset - confine processes to processor and memory node subsets
The cpuset file system is a pseudo-file-system interface to the kernel
cpuset mechanism, which is used to control the processor placement and
memory placement of processes. It is commonly mounted at /dev/cpuset.
On systems with kernels compiled with built in support for cpusets, all
processes are attached to a cpuset, and cpusets are always present. If
a system supports cpusets, then it will have the entry nodev cpuset in
the file /proc/filesystems. By mounting the cpuset file system (see
the EXAMPLE section below), the administrator can configure the cpusets
on a system to control the processor and memory placement of processes
on that system. By default, if the cpuset configuration on a system is
not modified or if the cpuset file system is not even mounted, then the
cpuset mechanism, though present, has no affect on the system's
A cpuset defines a list of CPUs and memory nodes.
The CPUs of a system include all the logical processing units on which
a process can execute, including, if present, multiple processor cores
within a package and Hyper-Threads within a processor core. Memory
nodes include all distinct banks of main memory; small and SMP systems
typically have just one memory node that contains all the system's main
memory, while NUMA (non-uniform memory access) systems have multiple
Cpusets are represented as directories in a hierarchical pseudo-file
system, where the top directory in the hierarchy (/dev/cpuset)
represents the entire system (all online CPUs and memory nodes) and any
cpuset that is the child (descendant) of another parent cpuset contains
a subset of that parent's CPUs and memory nodes. The directories and
files representing cpusets have normal file-system permissions.
Every process in the system belongs to exactly one cpuset. A process
is confined to only run on the CPUs in the cpuset it belongs to, and to
allocate memory only on the memory nodes in that cpuset. When a
process fork(2)s, the child process is placed in the same cpuset as its
parent. With sufficient privilege, a process may be moved from one
cpuset to another and the allowed CPUs and memory nodes of an existing
cpuset may be changed.
When the system begins booting, a single cpuset is defined that
includes all CPUs and memory nodes on the system, and all processes are
in that cpuset. During the boot process, or later during normal system
operation, other cpusets may be created, as subdirectories of this top
cpuset, under the control of the system administrator, and processes
may be placed in these other cpusets.
Cpusets are integrated with the sched_setaffinity(2) scheduling
affinity mechanism and the mbind(2) and set_mempolicy(2) memory-
placement mechanisms in the kernel. Neither of these mechanisms let a
process make use of a CPU or memory node that is not allowed by that
process's cpuset. If changes to a process's cpuset placement conflict
with these other mechanisms, then cpuset placement is enforced even if
it means overriding these other mechanisms. The kernel accomplishes
this overriding by silently restricting the CPUs and memory nodes
requested by these other mechanisms to those allowed by the invoking
process's cpuset. This can result in these other calls returning an
error, if for example, such a call ends up requesting an empty set of
CPUs or memory nodes, after that request is restricted to the invoking
Typically, a cpuset is used to manage the CPU and memory-node
confinement for a set of cooperating processes such as a batch
scheduler job, and these other mechanisms are used to manage the
placement of individual processes or memory regions within that set or
Each directory below /dev/cpuset represents a cpuset and contains a
fixed set of pseudo-files describing the state of that cpuset.
New cpusets are created using the mkdir(2) system call or the mkdir(1)
command. The properties of a cpuset, such as its flags, allowed CPUs
and memory nodes, and attached processes, are queried and modified by
reading or writing to the appropriate file in that cpuset's directory,
as listed below.
The pseudo-files in each cpuset directory are automatically created
when the cpuset is created, as a result of the mkdir(2) invocation. It
is not possible to directly add or remove these pseudo-files.
A cpuset directory that contains no child cpuset directories, and has
no attached processes, can be removed using rmdir(2) or rmdir(1). It
is not necessary, or possible, to remove the pseudo-files inside the
directory before removing it.
The pseudo-files in each cpuset directory are small text files that may
be read and written using traditional shell utilities such as cat(1),
and echo(1), or from a program by using file I/O library functions or
system calls, such as open(2), read(2), write(2), and close(2).
The pseudo-files in a cpuset directory represent internal kernel state
and do not have any persistent image on disk. Each of these per-cpuset
files is listed and described below.
tasks List of the process IDs (PIDs) of the processes in that cpuset.
The list is formatted as a series of ASCII decimal numbers, each
followed by a newline. A process may be added to a cpuset
(automatically removing it from the cpuset that previously
contained it) by writing its PID to that cpuset's tasks file
(with or without a trailing newline.)
Warning: only one PID may be written to the tasks file at a
time. If a string is written that contains more than one PID,
only the first one will be used.
Flag (0 or 1). If set (1), that cpuset will receive special
handling after it is released, that is, after all processes
cease using it (i.e., terminate or are moved to a different
cpuset) and all child cpuset directories have been removed. See
the Notify On Release section, below.
cpus List of the physical numbers of the CPUs on which processes in
that cpuset are allowed to execute. See List Format below for a
description of the format of cpus.
The CPUs allowed to a cpuset may be changed by writing a new
list to its cpus file.
Flag (0 or 1). If set (1), the cpuset has exclusive use of its
CPUs (no sibling or cousin cpuset may overlap CPUs). By default
this is off (0). Newly created cpusets also initially default
this to off (0).
Two cpusets are sibling cpusets if they share the same parent
cpuset in the /dev/cpuset hierarchy. Two cpusets are cousin
cpusets if neither is the ancestor of the other. Regardless of
the cpu_exclusive setting, if one cpuset is the ancestor of
another, and if both of these cpusets have nonempty cpus, then
their cpus must overlap, because the cpus of any cpuset are
always a subset of the cpus of its parent cpuset.
mems List of memory nodes on which processes in this cpuset are
allowed to allocate memory. See List Format below for a
description of the format of mems.
Flag (0 or 1). If set (1), the cpuset has exclusive use of its
memory nodes (no sibling or cousin may overlap). Also if set
(1), the cpuset is a Hardwall cpuset (see below.) By default
this is off (0). Newly created cpusets also initially default
this to off (0).
Regardless of the mem_exclusive setting, if one cpuset is the
ancestor of another, then their memory nodes must overlap,
because the memory nodes of any cpuset are always a subset of
the memory nodes of that cpuset's parent cpuset.
mem_hardwall (since Linux 2.6.26)
Flag (0 or 1). If set (1), the cpuset is a Hardwall cpuset (see
below.) Unlike mem_exclusive, there is no constraint on whether
cpusets marked mem_hardwall may have overlapping memory nodes
with sibling or cousin cpusets. By default this is off (0).
Newly created cpusets also initially default this to off (0).
memory_migrate (since Linux 2.6.16)
Flag (0 or 1). If set (1), then memory migration is enabled.
By default this is off (0). See the Memory Migration section,
memory_pressure (since Linux 2.6.16)
A measure of how much memory pressure the processes in this
cpuset are causing. See the Memory Pressure section, below.
Unless memory_pressure_enabled is enabled, always has value zero
(0). This file is read-only. See the WARNINGS section, below.
memory_pressure_enabled (since Linux 2.6.16)
Flag (0 or 1). This file is only present in the root cpuset,
normally /dev/cpuset. If set (1), the memory_pressure
calculations are enabled for all cpusets in the system. By
default this is off (0). See the Memory Pressure section,
memory_spread_page (since Linux 2.6.17)
Flag (0 or 1). If set (1), pages in the kernel page cache
(file-system buffers) are uniformly spread across the cpuset.
By default this is off (0) in the top cpuset, and inherited from
the parent cpuset in newly created cpusets. See the Memory
Spread section, below.
memory_spread_slab (since Linux 2.6.17)
Flag (0 or 1). If set (1), the kernel slab caches for file I/O
(directory and inode structures) are uniformly spread across the
cpuset. By default this is off (0) in the top cpuset, and
inherited from the parent cpuset in newly created cpusets. See
the Memory Spread section, below.
sched_load_balance (since Linux 2.6.24)
Flag (0 or 1). If set (1, the default) the kernel will
automatically load balance processes in that cpuset over the
allowed CPUs in that cpuset. If cleared (0) the kernel will
avoid load balancing processes in this cpuset, unless some other
cpuset with overlapping CPUs has its sched_load_balance flag
set. See Scheduler Load Balancing, below, for further details.
sched_relax_domain_level (since Linux 2.6.26)
Integer, between -1 and a small positive value. The
sched_relax_domain_level controls the width of the range of CPUs
over which the kernel scheduler performs immediate rebalancing
of runnable tasks across CPUs. If sched_load_balance is
disabled, then the setting of sched_relax_domain_level does not
matter, as no such load balancing is done. If
sched_load_balance is enabled, then the higher the value of the
sched_relax_domain_level, the wider the range of CPUs over which
immediate load balancing is attempted. See Scheduler Relax
Domain Level, below, for further details.
In addition to the above pseudo-files in each directory below
/dev/cpuset, each process has a pseudo-file, /proc/<pid>/cpuset, that
displays the path of the process's cpuset directory relative to the
root of the cpuset file system.
Also the /proc/<pid>/status file for each process has four added lines,
displaying the process's Cpus_allowed (on which CPUs it may be
scheduled) and Mems_allowed (on which memory nodes it may obtain
memory), in the two formats Mask Format and List Format (see below) as
shown in the following example:
The "allowed" fields were added in Linux 2.6.24; the "allowed_list"
fields were added in Linux 2.6.26.
In addition to controlling which cpus and mems a process is allowed to
use, cpusets provide the following extended capabilities.
If a cpuset is marked cpu_exclusive or mem_exclusive, no other cpuset,
other than a direct ancestor or descendant, may share any of the same
CPUs or memory nodes.
A cpuset that is mem_exclusive restricts kernel allocations for buffer
cache pages and other internal kernel data pages commonly shared by the
kernel across multiple users. All cpusets, whether mem_exclusive or
not, restrict allocations of memory for user space. This enables
configuring a system so that several independent jobs can share common
kernel data, while isolating each job's user allocation in its own
cpuset. To do this, construct a large mem_exclusive cpuset to hold all
the jobs, and construct child, non-mem_exclusive cpusets for each
individual job. Only a small amount of kernel memory, such as requests
from interrupt handlers, is allowed to be placed on memory nodes
outside even a mem_exclusive cpuset.
A cpuset that has mem_exclusive or mem_hardwall set is a hardwall
cpuset. A hardwall cpuset restricts kernel allocations for page,
buffer, and other data commonly shared by the kernel across multiple
users. All cpusets, whether hardwall or not, restrict allocations of
memory for user space.
This enables configuring a system so that several independent jobs can
share common kernel data, such as file system pages, while isolating
each job's user allocation in its own cpuset. To do this, construct a
large hardwall cpuset to hold all the jobs, and construct child cpusets
for each individual job which are not hardwall cpusets.
Only a small amount of kernel memory, such as requests from interrupt
handlers, is allowed to be taken outside even a hardwall cpuset.
Notify On Release
If the notify_on_release flag is enabled (1) in a cpuset, then whenever
the last process in the cpuset leaves (exits or attaches to some other
cpuset) and the last child cpuset of that cpuset is removed, the kernel
will run the command /sbin/cpuset_release_agent, supplying the pathname
(relative to the mount point of the cpuset file system) of the
abandoned cpuset. This enables automatic removal of abandoned cpusets.
The default value of notify_on_release in the root cpuset at system
boot is disabled (0). The default value of other cpusets at creation
is the current value of their parent's notify_on_release setting.
The command /sbin/cpuset_release_agent is invoked, with the name
(/dev/cpuset relative path) of the to-be-released cpuset in argv.
The usual contents of the command /sbin/cpuset_release_agent is simply
the shell script:
As with other flag values below, this flag can be changed by writing an
ASCII number 0 or 1 (with optional trailing newline) into the file, to
clear or set the flag, respectively.
The memory_pressure of a cpuset provides a simple per-cpuset running
average of the rate that the processes in a cpuset are attempting to
free up in-use memory on the nodes of the cpuset to satisfy additional
This enables batch managers that are monitoring jobs running in
dedicated cpusets to efficiently detect what level of memory pressure
that job is causing.
This is useful both on tightly managed systems running a wide mix of
submitted jobs, which may choose to terminate or reprioritize jobs that
are trying to use more memory than allowed on the nodes assigned them,
and with tightly coupled, long-running, massively parallel scientific
computing jobs that will dramatically fail to meet required performance
goals if they start to use more memory than allowed to them.
This mechanism provides a very economical way for the batch manager to
monitor a cpuset for signs of memory pressure. It's up to the batch
manager or other user code to decide what action to take if it detects
signs of memory pressure.
Unless memory pressure calculation is enabled by setting the pseudo-
file /dev/cpuset/memory_pressure_enabled, it is not computed for any
cpuset, and reads from any memory_pressure always return zero, as
represented by the ASCII string "0\n". See the WARNINGS section,
A per-cpuset, running average is employed for the following reasons:
* Because this meter is per-cpuset rather than per-process or per
virtual memory region, the system load imposed by a batch scheduler
monitoring this metric is sharply reduced on large systems, because
a scan of the tasklist can be avoided on each set of queries.
* Because this meter is a running average rather than an accumulating
counter, a batch scheduler can detect memory pressure with a single
read, instead of having to read and accumulate results for a period
* Because this meter is per-cpuset rather than per-process, the batch
scheduler can obtain the key information--memory pressure in a
cpuset--with a single read, rather than having to query and
accumulate results over all the (dynamically changing) set of
processes in the cpuset.
The memory_pressure of a cpuset is calculated using a per-cpuset simple
digital filter that is kept within the kernel. For each cpuset, this
filter tracks the recent rate at which processes attached to that
cpuset enter the kernel direct reclaim code.
The kernel direct reclaim code is entered whenever a process has to
satisfy a memory page request by first finding some other page to
repurpose, due to lack of any readily available already free pages.
Dirty file system pages are repurposed by first writing them to disk.
Unmodified file system buffer pages are repurposed by simply dropping
them, though if that page is needed again, it will have to be reread
The memory_pressure file provides an integer number representing the
recent (half-life of 10 seconds) rate of entries to the direct reclaim
code caused by any process in the cpuset, in units of reclaims
attempted per second, times 1000.
There are two Boolean flag files per cpuset that control where the
kernel allocates pages for the file-system buffers and related in-
kernel data structures. They are called memory_spread_page and
If the per-cpuset Boolean flag file memory_spread_page is set, then the
kernel will spread the file-system buffers (page cache) evenly over all
the nodes that the faulting process is allowed to use, instead of
preferring to put those pages on the node where the process is running.
If the per-cpuset Boolean flag file memory_spread_slab is set, then the
kernel will spread some file-system-related slab caches, such as those
for inodes and directory entries, evenly over all the nodes that the
faulting process is allowed to use, instead of preferring to put those
pages on the node where the process is running.
The setting of these flags does not affect the data segment (see
brk(2)) or stack segment pages of a process.
By default, both kinds of memory spreading are off and the kernel
prefers to allocate memory pages on the node local to where the
requesting process is running. If that node is not allowed by the
process's NUMA memory policy or cpuset configuration or if there are
insufficient free memory pages on that node, then the kernel looks for
the nearest node that is allowed and has sufficient free memory.
When new cpusets are created, they inherit the memory spread settings
of their parent.
Setting memory spreading causes allocations for the affected page or
slab caches to ignore the process's NUMA memory policy and be spread
instead. However, the effect of these changes in memory placement
caused by cpuset-specified memory spreading is hidden from the mbind(2)
or set_mempolicy(2) calls. These two NUMA memory policy calls always
appear to behave as if no cpuset-specified memory spreading is in
effect, even if it is. If cpuset memory spreading is subsequently
turned off, the NUMA memory policy most recently specified by these
calls is automatically reapplied.
Both memory_spread_page and memory_spread_slab are Boolean flag files.
By default they contain "0", meaning that the feature is off for that
cpuset. If a "1" is written to that file, that turns the named feature
Cpuset-specified memory spreading behaves similarly to what is known
(in other contexts) as round-robin or interleave memory placement.
Cpuset-specified memory spreading can provide substantial performance
improvements for jobs that:
a) need to place thread-local data on memory nodes close to the CPUs
which are running the threads that most frequently access that data;
b) need to access large file-system data sets that must to be spread
across the several nodes in the job's cpuset in order to fit.
Without this policy, the memory allocation across the nodes in the
job's cpuset can become very uneven, especially for jobs that might
have just a single thread initializing or reading in the data set.
Normally, under the default setting (disabled) of memory_migrate, once
a page is allocated (given a physical page of main memory) then that
page stays on whatever node it was allocated, so long as it remains
allocated, even if the cpuset's memory-placement policy mems
When memory migration is enabled in a cpuset, if the mems setting of
the cpuset is changed, then any memory page in use by any process in
the cpuset that is on a memory node that is no longer allowed will be
migrated to a memory node that is allowed.
Furthermore, if a process is moved into a cpuset with memory_migrate
enabled, any memory pages it uses that were on memory nodes allowed in
its previous cpuset, but which are not allowed in its new cpuset, will
be migrated to a memory node allowed in the new cpuset.
The relative placement of a migrated page within the cpuset is
preserved during these migration operations if possible. For example,
if the page was on the second valid node of the prior cpuset, then the
page will be placed on the second valid node of the new cpuset, if
Scheduler Load Balancing
The kernel scheduler automatically load balances processes. If one CPU
is underutilized, the kernel will look for processes on other more
overloaded CPUs and move those processes to the underutilized CPU,
within the constraints of such placement mechanisms as cpusets and
The algorithmic cost of load balancing and its impact on key shared
kernel data structures such as the process list increases more than
linearly with the number of CPUs being balanced. For example, it costs
more to load balance across one large set of CPUs than it does to
balance across two smaller sets of CPUs, each of half the size of the
larger set. (The precise relationship between the number of CPUs being
balanced and the cost of load balancing depends on implementation
details of the kernel process scheduler, which is subject to change
over time, as improved kernel scheduler algorithms are implemented.)
The per-cpuset flag sched_load_balance provides a mechanism to suppress
this automatic scheduler load balancing in cases where it is not needed
and suppressing it would have worthwhile performance benefits.
By default, load balancing is done across all CPUs, except those marked
isolated using the kernel boot time "isolcpus=" argument. (See
Scheduler Relax Domain Level, below, to change this default.)
This default load balancing across all CPUs is not well suited to the
following two situations:
* On large systems, load balancing across many CPUs is expensive. If
the system is managed using cpusets to place independent jobs on
separate sets of CPUs, full load balancing is unnecessary.
* Systems supporting real-time on some CPUs need to minimize system
overhead on those CPUs, including avoiding process load balancing if
that is not needed.
When the per-cpuset flag sched_load_balance is enabled (the default
setting), it requests load balancing across all the CPUs in that
cpuset's allowed CPUs, ensuring that load balancing can move a process
(not otherwise pinned, as by sched_setaffinity(2)) from any CPU in that
cpuset to any other.
When the per-cpuset flag sched_load_balance is disabled, then the
scheduler will avoid load balancing across the CPUs in that cpuset,
except in so far as is necessary because some overlapping cpuset has
So, for example, if the top cpuset has the flag sched_load_balance
enabled, then the scheduler will load balance across all CPUs, and the
setting of the sched_load_balance flag in other cpusets has no effect,
as we're already fully load balancing.
Therefore in the above two situations, the flag sched_load_balance
should be disabled in the top cpuset, and only some of the smaller,
child cpusets would have this flag enabled.
When doing this, you don't usually want to leave any unpinned processes
in the top cpuset that might use nontrivial amounts of CPU, as such
processes may be artificially constrained to some subset of CPUs,
depending on the particulars of this flag setting in descendant
cpusets. Even if such a process could use spare CPU cycles in some
other CPUs, the kernel scheduler might not consider the possibility of
load balancing that process to the underused CPU.
Of course, processes pinned to a particular CPU can be left in a cpuset
that disables sched_load_balance as those processes aren't going
anywhere else anyway.
Scheduler Relax Domain Level
The kernel scheduler performs immediate load balancing whenever a CPU
becomes free or another task becomes runnable. This load balancing
works to ensure that as many CPUs as possible are usefully employed
running tasks. The kernel also performs periodic load balancing off
the software clock described in time(7). The setting of
sched_relax_domain_level only applies to immediate load balancing.
Regardless of the sched_relax_domain_level setting, periodic load
balancing is attempted over all CPUs (unless disabled by turning off
sched_load_balance.) In any case, of course, tasks will only be
scheduled to run on CPUs allowed by their cpuset, as modified by
sched_setaffinity(2) system calls.
On small systems, such as those with just a few CPUs, immediate load
balancing is useful to improve system interactivity and to minimize
wasteful idle CPU cycles. But on large systems, attempting immediate
load balancing across a large number of CPUs can be more costly than it
is worth, depending on the particular performance characteristics of
the job mix and the hardware.
The exact meaning of the small integer values of
sched_relax_domain_level will depend on internal implementation details
of the kernel scheduler code and on the non-uniform architecture of the
hardware. Both of these will evolve over time and vary by system
architecture and kernel version.
As of this writing, when this capability was introduced in Linux
2.6.26, on certain popular architectures, the positive values of
sched_relax_domain_level have the following meanings.
(1) Perform immediate load balancing across Hyper-Thread siblings on
the same core.
(2) Perform immediate load balancing across other cores in the same
(3) Perform immediate load balancing across other CPUs on the same node
(4) Perform immediate load balancing across over several
(implementation detail) nodes [On NUMA systems].
(5) Perform immediate load balancing across over all CPUs in system [On
The sched_relax_domain_level value of zero (0) always means don't
perform immediate load balancing, hence that load balancing is only
done periodically, not immediately when a CPU becomes available or
another task becomes runnable.
The sched_relax_domain_level value of minus one (-1) always means use
the system default value. The system default value can vary by
architecture and kernel version. This system default value can be
changed by kernel boot-time "relax_domain_level=" argument.
In the case of multiple overlapping cpusets which have conflicting
sched_relax_domain_level values, then the highest such value applies to
all CPUs in any of the overlapping cpusets. In such cases, the value
minus one (-1) is the lowest value, overridden by any other value, and
the value zero (0) is the next lowest value.
The following formats are used to represent sets of CPUs and memory
The Mask Format is used to represent CPU and memory-node bitmasks in
the /proc/<pid>/status file.
This format displays each 32-bit word in hexadecimal (using ASCII
characters "0" - "9" and "a" - "f"); words are filled with leading
zeros, if required. For masks longer than one word, a comma separator
is used between words. Words are displayed in big-endian order, which
has the most significant bit first. The hex digits within a word are
also in big-endian order.
The number of 32-bit words displayed is the minimum number needed to
display all bits of the bitmask, based on the size of the bitmask.
Examples of the Mask Format:
00000001 # just bit 0 set
40000000,00000000,00000000 # just bit 94 set
00000001,00000000,00000000 # just bit 64 set
000000ff,00000000 # bits 32-39 set
00000000,000E3862 # 1,5,6,11-13,17-19 set
A mask with bits 0, 1, 2, 4, 8, 16, 32, and 64 set displays as:
The first "1" is for bit 64, the second for bit 32, the third for bit
16, the fourth for bit 8, the fifth for bit 4, and the "7" is for bits
2, 1, and 0.
The List Format for cpus and mems is a comma-separated list of CPU or
memory-node numbers and ranges of numbers, in ASCII decimal.
Examples of the List Format:
0-4,9 # bits 0, 1, 2, 3, 4, and 9 set
0-2,7,12-14 # bits 0, 1, 2, 7, 12, 13, and 14 set
The following rules apply to each cpuset:
* Its CPUs and memory nodes must be a (possibly equal) subset of its
* It can only be marked cpu_exclusive if its parent is.
* It can only be marked mem_exclusive if its parent is.
* If it is cpu_exclusive, its CPUs may not overlap any sibling.
* If it is memory_exclusive, its memory nodes may not overlap any
The permissions of a cpuset are determined by the permissions of the
directories and pseudo-files in the cpuset file system, normally
mounted at /dev/cpuset.
For instance, a process can put itself in some other cpuset (than its
current one) if it can write the tasks file for that cpuset. This
requires execute permission on the encompassing directories and write
permission on the tasks file.
An additional constraint is applied to requests to place some other
process in a cpuset. One process may not attach another to a cpuset
unless it would have permission to send that process a signal (see
A process may create a child cpuset if it can access and write the
parent cpuset directory. It can modify the CPUs or memory nodes in a
cpuset if it can access that cpuset's directory (execute permissions on
the each of the parent directories) and write the corresponding cpus or
There is one minor difference between the manner in which these
permissions are evaluated and the manner in which normal file-system
operation permissions are evaluated. The kernel interprets relative
pathnames starting at a process's current working directory. Even if
one is operating on a cpuset file, relative pathnames are interpreted
relative to the process's current working directory, not relative to
the process's current cpuset. The only ways that cpuset paths relative
to a process's current cpuset can be used are if either the process's
current working directory is its cpuset (it first did a cd or chdir(2)
to its cpuset directory beneath /dev/cpuset, which is a bit unusual) or
if some user code converts the relative cpuset path to a full file-
In theory, this means that user code should specify cpusets using
absolute pathnames, which requires knowing the mount point of the
cpuset file system (usually, but not necessarily, /dev/cpuset). In
practice, all user level code that this author is aware of simply
assumes that if the cpuset file system is mounted, then it is mounted
at /dev/cpuset. Furthermore, it is common practice for carefully
written user code to verify the presence of the pseudo-file
/dev/cpuset/tasks in order to verify that the cpuset pseudo-file system
is currently mounted.
By default, the per-cpuset file memory_pressure always contains zero
(0). Unless this feature is enabled by writing "1" to the pseudo-file
/dev/cpuset/memory_pressure_enabled, the kernel does not compute per-
Using the echo command
When using the echo command at the shell prompt to change the values of
cpuset files, beware that the built-in echo command in some shells does
not display an error message if the write(2) system call fails. For
example, if the command:
echo 19 > mems
failed because memory node 19 was not allowed (perhaps the current
system does not have a memory node 19), then the echo command might not
display any error. It is better to use the /bin/echo external command
to change cpuset file settings, as this command will display write(2)
errors, as in the example:
/bin/echo 19 > mems
/bin/echo: write error: Invalid argument
Not all allocations of system memory are constrained by cpusets, for
the following reasons.
If hot-plug functionality is used to remove all the CPUs that are
currently assigned to a cpuset, then the kernel will automatically
update the cpus_allowed of all processes attached to CPUs in that
cpuset to allow all CPUs. When memory hot-plug functionality for
removing memory nodes is available, a similar exception is expected to
apply there as well. In general, the kernel prefers to violate cpuset
placement, rather than starving a process that has had all its allowed
CPUs or memory nodes taken offline. User code should reconfigure
cpusets to only refer to online CPUs and memory nodes when using hot-
plug to add or remove such resources.
A few kernel-critical, internal memory-allocation requests, marked
GFP_ATOMIC, must be satisfied immediately. The kernel may drop some
request or malfunction if one of these allocations fail. If such a
request cannot be satisfied within the current process's cpuset, then
we relax the cpuset, and look for memory anywhere we can find it. It's
better to violate the cpuset than stress the kernel.
Allocations of memory requested by kernel drivers while processing an
interrupt lack any relevant process context, and are not confined by
You can use the rename(2) system call to rename cpusets. Only simple
renaming is supported; that is, changing the name of a cpuset directory
is permitted, but moving a directory into a different directory is not
The Linux kernel implementation of cpusets sets errno to specify the
reason for a failed system call affecting cpusets.
The possible errno settings and their meaning when set on a failed
cpuset call are as listed below.
E2BIG Attempted a write(2) on a special cpuset file with a length
larger than some kernel-determined upper limit on the length of
EACCES Attempted to write(2) the process ID (PID) of a process to a
cpuset tasks file when one lacks permission to move that
EACCES Attempted to add, using write(2), a CPU or memory node to a
cpuset, when that CPU or memory node was not already in its
EACCES Attempted to set, using write(2), cpu_exclusive or mem_exclusive
on a cpuset whose parent lacks the same setting.
EACCES Attempted to write(2) a memory_pressure file.
EACCES Attempted to create a file in a cpuset directory.
EBUSY Attempted to remove, using rmdir(2), a cpuset with attached
EBUSY Attempted to remove, using rmdir(2), a cpuset with child
EBUSY Attempted to remove a CPU or memory node from a cpuset that is
also in a child of that cpuset.
EEXIST Attempted to create, using mkdir(2), a cpuset that already
EEXIST Attempted to rename(2) a cpuset to a name that already exists.
EFAULT Attempted to read(2) or write(2) a cpuset file using a buffer
that is outside the writing processes accessible address space.
EINVAL Attempted to change a cpuset, using write(2), in a way that
would violate a cpu_exclusive or mem_exclusive attribute of that
cpuset or any of its siblings.
EINVAL Attempted to write(2) an empty cpus or mems list to a cpuset
which has attached processes or child cpusets.
EINVAL Attempted to write(2) a cpus or mems list which included a range
with the second number smaller than the first number.
EINVAL Attempted to write(2) a cpus or mems list which included an
invalid character in the string.
EINVAL Attempted to write(2) a list to a cpus file that did not include
any online CPUs.
EINVAL Attempted to write(2) a list to a mems file that did not include
any online memory nodes.
EINVAL Attempted to write(2) a list to a mems file that included a node
that held no memory.
EIO Attempted to write(2) a string to a cpuset tasks file that does
not begin with an ASCII decimal integer.
EIO Attempted to rename(2) a cpuset into a different directory.
Attempted to read(2) a /proc/<pid>/cpuset file for a cpuset path
that is longer than the kernel page size.
Attempted to create, using mkdir(2), a cpuset whose base
directory name is longer than 255 characters.
Attempted to create, using mkdir(2), a cpuset whose full
pathname, including the mount point (typically "/dev/cpuset/")
prefix, is longer than 4095 characters.
ENODEV The cpuset was removed by another process at the same time as a
write(2) was attempted on one of the pseudo-files in the cpuset
ENOENT Attempted to create, using mkdir(2), a cpuset in a parent cpuset
that doesn't exist.
ENOENT Attempted to access(2) or open(2) a nonexistent file in a cpuset
ENOMEM Insufficient memory is available within the kernel; can occur on
a variety of system calls affecting cpusets, but only if the
system is extremely short of memory.
ENOSPC Attempted to write(2) the process ID (PID) of a process to a
cpuset tasks file when the cpuset had an empty cpus or empty
ENOSPC Attempted to write(2) an empty cpus or mems setting to a cpuset
that has tasks attached.
Attempted to rename(2) a nonexistent cpuset.
EPERM Attempted to remove a file from a cpuset directory.
ERANGE Specified a cpus or mems list to the kernel which included a
number too large for the kernel to set in its bitmasks.
ESRCH Attempted to write(2) the process ID (PID) of a nonexistent
process to a cpuset tasks file.
Cpusets appeared in version 2.6.12 of the Linux kernel.
Despite its name, the pid parameter is actually a thread ID, and each
thread in a threaded group can be attached to a different cpuset. The
value returned from a call to gettid(2) can be passed in the argument
memory_pressure cpuset files can be opened for writing, creation, or
truncation, but then the write(2) fails with errno set to EACCES, and
the creation and truncation options on open(2) have no effect.
The following examples demonstrate querying and setting cpuset options
using shell commands.
Creating and attaching to a cpuset.
To create a new cpuset and attach the current command shell to it, the
1) mkdir /dev/cpuset (if not already done)
2) mount -t cpuset none /dev/cpuset (if not already done)
3) Create the new cpuset using mkdir(1).
4) Assign CPUs and memory nodes to the new cpuset.
5) Attach the shell to the new cpuset.
For example, the following sequence of commands will set up a cpuset
named "Charlie", containing just CPUs 2 and 3, and memory node 1, and
then attach the current shell to that cpuset.
$ mkdir /dev/cpuset
$ mount -t cpuset cpuset /dev/cpuset
$ cd /dev/cpuset
$ mkdir Charlie
$ cd Charlie
$ /bin/echo 2-3 > cpus
$ /bin/echo 1 > mems
$ /bin/echo $$ > tasks
# The current shell is now running in cpuset Charlie
# The next line should display '/Charlie'
$ cat /proc/self/cpuset
Migrating a job to different memory nodes.
To migrate a job (the set of processes attached to a cpuset) to
different CPUs and memory nodes in the system, including moving the
memory pages currently allocated to that job, perform the following
1) Let's say we want to move the job in cpuset alpha (CPUs 4-7 and
memory nodes 2-3) to a new cpuset beta (CPUs 16-19 and memory nodes
2) First create the new cpuset beta.
3) Then allow CPUs 16-19 and memory nodes 8-9 in beta.
4) Then enable memory_migration in beta.
5) Then move each process from alpha to beta.
The following sequence of commands accomplishes this.
$ cd /dev/cpuset
$ mkdir beta
$ cd beta
$ /bin/echo 16-19 > cpus
$ /bin/echo 8-9 > mems
$ /bin/echo 1 > memory_migrate
$ while read i; do /bin/echo $i; done < ../alpha/tasks > tasks
The above should move any processes in alpha to beta, and any memory
held by these processes on memory nodes 2-3 to memory nodes 8-9,
Notice that the last step of the above sequence did not do:
$ cp ../alpha/tasks tasks
The while loop, rather than the seemingly easier use of the cp(1)
command, was necessary because only one process PID at a time may be
written to the tasks file.
The same effect (writing one PID at a time) as the while loop can be
accomplished more efficiently, in fewer keystrokes and in syntax that
works on any shell, but alas more obscurely, by using the -u
(unbuffered) option of sed(1):
$ sed -un p < ../alpha/tasks > tasks
taskset(1), get_mempolicy(2), getcpu(2), mbind(2),
sched_getaffinity(2), sched_setaffinity(2), sched_setscheduler(2),
set_mempolicy(2), CPU_SET(3), proc(5), numa(7), migratepages(8),
The kernel source file Documentation/cpusets.txt.
This page is part of release 3.35 of the Linux man-pages project. A
description of the project, and information about reporting bugs, can
be found at http://man7.org/linux/man-pages/.