Provided by: libsane-common_1.0.22-7ubuntu1_i386 bug

NAME

       sane - Scanner Access Now Easy: API for accessing scanners

DESCRIPTION

       SANE  is  an  application  programming  interface  (API)  that provides
       standardized  access  to  any  raster  image  scanner   hardware.   The
       standardized  interface  makes it possible to write just one driver for
       each scanner  device  instead  of  one  driver  for  each  scanner  and
       application.

       While  SANE  is  primarily targeted at a UNIX environment, the standard
       has been carefully designed to make it possible to implement the API on
       virtually any hardware or operating system.

       This  manual page provides a summary of the information available about
       SANE.

       If you have trouble getting your scanner detected,  read  the  PROBLEMS
       section.

TERMINOLOGY

       An  application that uses the SANE interface is called a SANE frontend.
       A driver that implements the SANE interface is called a  SANE  backend.
       A  meta  backend  provides  some  means  to  manage  one  or more other
       backends.

SOFTWARE PACKAGES

       The package `sane-backends' contains a lot of  backends,  documentation
       (including the SANE standard), networking support, and the command line
       frontend  `scanimage'.   The  frontends   `xscanimage',   `xcam',   and
       `scanadf'  are included in the package `sane-frontends'.  Both packages
       can      be      downloaded      from      the      SANE       homepage
       (http://www.sane-project.org/).   Information about other frontends and
       backends can also be found on the SANE homepage.

GENERAL INFORMATION

       The following sections provide short descriptions  and  links  to  more
       information  about  several  aspects  of SANE.  A name with a number in
       parenthesis (e.g.  `sane-dll(5)') points to a manual page. In this case
       `man    5    sane-dll'    will   display   the   page.   Entries   like
       `/usr/share/doc/libsane/sane.tex' are references  to  text  files  that
       were     copied     to     the     SANE     documentation     directory
       (/usr/share/doc/libsane/) during installation. Everything else is a URL
       to a resource on the web.

       SANE homepage
         Information on all aspects of SANE including a tutorial and a link to
         the   SANE   FAQ   can   be   found    on    the    SANE    homepage:
         http://www.sane-project.org/.

       SANE device lists
         The  SANE  device  lists contain information about the status of SANE
         support for a specific device. If your scanner is  not  listed  there
         (either supported or unsupported), please contact us. See section HOW
         CAN YOU HELP SANE for details. There are lists for specific  releases
         of  SANE,  for  the  current development version and a search engine:
         http://www.sane-project.org/sane-supported-devices.html.   The  lists
         are also installed on your system at /usr/share/doc/libsane/.

       SANE mailing list
         There  is  a  mailing  list  for  the  purpose of discussing the SANE
         standard and its implementations: sane-devel.  Despite its name,  the
         list  is  not only intended for developers, but also for users. There
         are also some more lists for  special  topics,  however,  for  users,
         sane-devel  is  the  right  list.  How  to subscribe and unsubscribe:
         http://www.sane-project.org/mailing-lists.html.

       SANE IRC channel
         The IRC (Internet Relay Chat) channel  #sane  can  be  found  on  the
         Freenode   network   (irc.freenode.net).  It's  for  discussing  SANE
         problems,  talking  about  development  and  general   SANE   related
         chatting. Before asking for help, please read the other documentation
         mentioned in this manual page. The channel's topic is also  used  for
         announcements  of  problems  with SANE infrastructure (mailing lists,
         web server, etc.).

       Compiling and installing SANE
         Look at /usr/share/doc/libsane/README  and  the  os-dependent  README
         files for information about compiling and installing SANE.

       SCSI configuration
         For  information  about  various  systems  and  SCSI  controllers see
         sane-scsi(5).

       USB configuration
         For information about USB configuration see sane-usb(5).

FRONTENDS AND MISCELLANEOUS PROGRAMS

       scanimage
         Command-line frontend. See scanimage(1).

       saned
         SANE network daemon  that  allows  remote  clients  to  access  image
         acquisition devices available on the local host. See saned(8).

       sane-find-scanner
         Command-line  tool  to find SCSI and USB scanners and determine their
         Unix device files. See sane-find-scanner(1).

       Also, have a look at the sane-frontends package (including  xscanimage,
       xcam,   and   scanadf)   and   the   frontend   information   page   at
       http://www.sane-project.org/sane-frontends.html.

BACKENDS FOR SCANNERS

       abaton
         The SANE backend for Abaton flatbed scanners supports the Scan 300/GS
         (8bit,  256  levels  of  gray)  and  the Scan 300/S (black and white,
         untested). See sane-abaton(5) for details.

       agfafocus
         This backend supports AGFA  Focus  scanners  and  the  Siemens  S9036
         (untested).  See sane-agfafocus(5) for details.

       apple
         The  SANE  backend  for Apple flatbed scanners supports the following
         scanners:   AppleScanner,   OneScanner   and   ColorOneScanner.   See
         sane-apple(5) for details.

       artec
         The  SANE  Artec  backend  supports several Artec/Ultima SCSI flatbed
         scanners as well as the BlackWidow BW4800SP and the  Plustek  19200S.
         See sane-artec(5) for details.

       artec_eplus48u
         The SANE artec_eplus48u backend supports the scanner Artec E+ 48U and
         re-badged models like Tevion MD 9693, Medion MD 9693, Medion MD  9705
         and Trust Easy Webscan 19200. See sane-artec_eplus48u(5) for details.

       as6e
         This  is  a  SANE  backend  for  using  the  Artec AS6E parallel port
         interface scanner. See sane-as6e(5) for details.

       avision
         This backend supports several Avision based scanners.  This  includes
         the  original  Avision scanners (like AV 630, AV 620, ...) as well as
         the HP ScanJet  53xx  and  74xx  series,  Fujitsu  ScanPartner,  some
         Mitsubishi   and  Minolta  film-scanners.   See  sane-avision(5)  for
         details.

       bh
         The bh backend provides access  to  Bell+Howell  Copiscan  II  series
         document scanners. See sane-bh(5) for details.

       canon
         The  canon  backend  supports  the  CanoScan  300,  CanoScan 600, and
         CanoScan 2700F SCSI flatbed scanners. See sane-canon(5) for details.

       canon630u
         The canon630u  backend  supports  the  CanoScan  630u  and  636u  USB
         scanners.  See sane-canon630u(5) for details.

       canon_dr
         The  canon_dr  backend  supports the Canon DR-Series ADF SCSI and USB
         scanners. See sane-canon_dr(5) for details.

       canon_pp
         The canon_pp backend supports the CanoScan FB330P, FB630P, N340P  and
         N640P parallel port scanners.  See sane-canon_pp(5) for details.

       cardscan
         This  backend  provides  support for Corex Cardscan USB scanners. See
         sane-cardscan(5) for details.

       coolscan
         This  is  a  SANE  backend  for  Nikon  Coolscan  film-scanners.  See
         sane-coolscan(5) for details.

       coolscan2
         This  is  a  SANE  backend  for  Nikon  Coolscan  film-scanners.  See
         sane-coolscan2(5) or http://coolscan2.sourceforge.net for details.

       epjitsu
         The epjitsu backend provides  support  for  Epson-based  Fujitsu  USB
         scanners. See sane-epjitsu(5) for details.

       epson
         The SANE epson backend provides support for Epson SCSI, parallel port
         and USB flatbed scanners. See sane-epson(5) for details.

       fujitsu
         The fujitsu backend provides support for most Fujitsu SCSI  and  USB,
         flatbed and adf scanners. See sane-fujitsu(5) for details.

       genesys
         The  genesys  backend  provides  support  for  scanners  based on the
         Genesys Logic GL646 and GL841 chips like the Medion 6471 and Hewlett-
         Packard  2300c.   Support  for GL841 based scanners is far from being
         complete. See sane-genesys(5) for details.

       gt68xx
         The gt68xx  backend  provides  support  for  scanners  based  on  the
         Grandtech  GT-6801  and  GT-6816 chips like the Artec Ultima 2000 and
         several Mustek BearPaw  CU  and  TA  models.  Some  Genius,  Lexmark,
         Medion, Packard Bell, Plustek, and Trust scanners are also supported.
         See sane-gt68xx(5) for details.

       hp
         The SANE  hp  backend  provides  access  to  Hewlett-Packard  ScanJet
         scanners  which  support  SCL  (Scanner  Control Language by HP). See
         sane-hp(5) for details.

       hpsj5s
         The SANE backend for the  Hewlett-Packard  ScanJet  5S  scanner.  See
         sane-hpsj5s(5) for details.

       hp3500
         The  SANE  backend  for  the Hewlett-Packard ScanJet 3500 series. See
         sane-hp3500(5) for details.

       hp3900
         The SANE backend for the Hewlett-Packard  ScanJet  3900  series.  See
         sane-hp3900(5) for details.

       hp4200
         The  SANE  backend  for  the Hewlett-Packard ScanJet 4200 series. See
         sane-hp4200(5) for details.

       hp5400
         The SANE backend for the Hewlett-Packard ScanJet  54XXC  series.  See
         sane-hp5400(5) for details.

       hpljm1005
         The  SANE backend for the Hewlett-Packard LaserJet M1005 scanner. See
         sane-hpljm1005(5) for details.

       hs2p
         The SANE backend for the Ricoh IS450 family  of  SCSI  scanners.  See
         sane-hs2p(5) for details.

       ibm
         The   SANE  backend  for  some  IBM  and  Ricoh  SCSI  scanners.  See
         sane-ibm(5) for details.

       kodak
         The SANE backend for some large Kodak scanners. See sane-kodak(5) for
         details.

       kvs1025
         The    SANE   backend   for   Panasonic   KV-S102xC   scanners.   See
         sane-kvs1025(5) for details.

       leo
         This backend supports the Leo S3 and the Across FS-1130, which  is  a
         re-badged LEO FS-1130 scanner. See sane-leo(5) for details.

       lexmark
         This  backend  supports the Lexmark X1100 series of USB scanners. See
         sane-lexmark(5) for details.

       ma1509
         The ma1509 backend supports the  Mustek  BearPaw  1200F  USB  flatbed
         scanner. See sane-ma1509(5) for details.

       magicolor
         The  magicolor  backend  supports the KONICA MINOLTA magicolor 1690MF
         multi-function   printer/scanner/fax.   See   sane-magicolor(5)   for
         details.

       matsushita
         This  backend  supports  some Panasonic KVSS high speed scanners. See
         sane-matsushita(5) for details.

       microtek
         The microtek backend  provides  access  to  the  "second  generation"
         Microtek  scanners  with SCSI-1 command set. See sane-microtek(5) for
         details.

       microtek2
         The microtek2 backend provides access to some Microtek scanners  with
         a SCSI-2 command set. See sane-microtek2(5) for details.

       mustek
         The  SANE  mustek  backend supports most Mustek SCSI flatbed scanners
         including the Paragon and ScanExpress series and the 600 II N and 600
         II  EP  (non-SCSI).  Some  Trust  scanners  are  also  supported. See
         sane-mustek(5) for details.

       mustek_pp
         The mustek_pp backend provides access to Mustek parallel port flatbed
         scanners. See sane-mustek_pp(5) for details.

       mustek_usb
         The mustek_usb backend provides access to some Mustek ScanExpress USB
         flatbed scanners. See sane-mustek_usb(5) for details.

       mustek_usb2
         The mustek_usb2 backend provides access to scanners using  the  SQ113
         chipset  like the Mustek BearPaw 2448 TA Pro USB flatbed scanner. See
         sane-mustek_usb2(5) for details.

       nec
         The SANE nec backend supports the NEC PC-IN500/4C SCSI  scanner.  See
         sane-nec(5) for details.

       niash
         The niash backend supports the Agfa Snapscan Touch and the HP ScanJet
         3300c, 3400c, and 4300c USB flatbed scanners. See  sane-niash(5)  for
         details.

       p5
         The SANE backend for Primax PagePartner. See sane-p5(5) for details.

       pie
         The  pie  backend  provides access to Pacific Image Electronics (PIE)
         and Devcom SCSI flatbed scanners. See sane-pie(5) for details.

       pixma
         The pixma backend supports  Canon  PIXMA  MP  series  (multi-function
         devices).  See  sane-pixma(5) or http://home.arcor.de/wittawat/pixma/
         for details.

       plustek
         The SANE plustek backend supports USB flatbed scanners that  use  the
         National  Semiconductor  LM983[1/2/3]-chipset  aka  Merlin.  Scanners
         using this LM983x chips include some models from Plustek, KYE/Genius,
         Hewlett-Packard,  Mustek, Umax, Epson, and Canon. See sane-plustek(5)
         for details.

       plustek_pp
         The SANE plustek_pp backend supports Plustek  parallel  port  flatbed
         scanners.  Scanners using the Plustek ASIC P96001, P96003, P98001 and
         P98003 include some models  from  Plustek,  KYE/Genius,  Primax.  See
         sane-plustek_pp(5) for details.

       ricoh
         The  ricoh  backend  provides  access  to the following Ricoh flatbed
         scanners: IS50 and IS60. See sane-ricoh(5) for details.

       s9036
         The s9036 backend provides access to Siemens 9036  flatbed  scanners.
         See sane-s9036(5) for details.

       sceptre
         The  sceptre  backend  provides  access  to the Sceptre S1200 flatbed
         scanner. See sane-sceptre(5) for details.

       sharp
         The  SANE  sharp  backend   supports   Sharp   SCSI   scanners.   See
         sane-sharp(5) for details.

       sm3600
         The  SANE  sm3600  backend  supports  the Microtek ScanMaker 3600 USB
         scanner. See sane-sm3600(5) for details.

       sm3840
         The SANE sm3840 backend supports  the  Microtek  ScanMaker  3840  USB
         scanner.  See sane-sm3840(5) for details.

       snapscan
         The  snapscan  backend  supports  AGFA SnapScan flatbed scanners. See
         sane-snapscan(5) for details.

       sp15c
         This backend  supports  the  Fujitsu  FCPA  ScanPartner  15C  flatbed
         scanner. See sane-sp15c(5) for details.

       st400
         The  sane-st400  backend  provides access to Siemens ST400 and ST800.
         See sane-st400(5) for details.

       tamarack
         The  SANE  tamarack  backend  supports  Tamarack   Artiscan   flatbed
         scanners. See sane-tamarack(5) for details.

       teco1 teco2 teco3
         The  SANE teco1, teco2 and teco3 backends support some TECO scanners,
         usually sold under the Relisys, Trust, Primax, Piotech, Dextra names.
         See sane-teco1(5), sane-teco2(5) and sane-teco3(5) for details.

       u12
         The sane-u12 backend provides USB flatbed scanners based on Plustek's
         ASIC 98003 (parallel-port ASIC) and  a  GeneSys  Logics'  USB-parport
         bridge  chip  like  the  Plustek OpticPro U(T)12. See sane-u12(5) for
         details.

       umax
         The sane-umax backend provides access to  several  UMAX-SCSI-scanners
         and some Linotype Hell SCSI-scanners. See sane-umax(5) for details.

       umax_pp
         The  sane-umax_pp  backend  provides  access  to  Umax  parallel port
         flatbed scanners and the HP 3200C. See sane-umax_pp(5) for details.

       umax1200u
         The sane-umax1220u  backend  supports  the  UMAX  Astra  1220U  (USB)
         flatbed  scanner  (and  also  the  UMAX  Astra  2000U,  sort of). See
         sane-umax1220u(5) for details.

       Also,   have   a   look   at   the   backend   information   page    at
       http://www.sane-project.org/sane-supported-devices.html and the list of
       projects in /usr/share/doc/libsane/PROJECTS.

BACKENDS FOR DIGITAL CAMERAS

       dc210
         Backend for Kodak DC210 Digital Camera. See sane-dc210(5).

       dc240
         Backend for Kodak DC240 Digital Camera. See sane-dc240(5).

       dc25
         Backend for Kodak DC20/DC25 Digital Cameras. See sane-dc25(5).

       dmc
         Backend for the Polaroid Digital Microscope Camera. See sane-dmc(5).

       gphoto2
         Backend for digital cameras supported by the gphoto2 library package.
         (See  http://www.gphoto.org  for  more  information  and  a  list  of
         supported cameras.)   Gphoto2  supports  over  140  different  camera
         models.   However,  please  note that more development and testing is
         needed before all of these cameras will be supported by SANE backend.
         See sane-gphoto2(5).

       qcam
         Backend for Connectix QuickCam cameras. See sane-qcam(5).

       stv680
         The sane-st680 backend provides access to webcams with a stv680 chip.
         See sane-st680(5) for details.

       Also,   have   a   look   at   the   backend   information   page    at
       http://www.sane-project.org/sane-supported-devices.html and the list of
       projects in /usr/share/doc/libsane/PROJECTS.

MISCELLANEOUS BACKENDS

       dll
         The sane-dll library implements a SANE backend that  provides  access
         to an arbitrary number of other SANE backends by dynamic loading. See
         sane-dll(5).

       net
         The SANE network daemon saned provides access to scanners located  on
         different   computers   in  connection  with  the  net  backend.  See
         sane-net(5) and saned(8).

       pnm
         PNM image reader pseudo-backend.  The  purpose  of  this  backend  is
         primarily to aid in debugging of SANE frontends. See sane-pnm(5).

       pint
         Backend  for  scanners  that  use the PINT (Pint Is Not Twain) device
         driver.  The PINT driver is being actively developed on  the  OpenBSD
         platform,  and  has  been  ported  to a few other *nix-like operating
         systems. See sane-pint(5).

       test
         The  SANE  test  backend  is  for  testing  frontends  and  the  SANE
         installation.   It  provides  test pictures and various test options.
         See sane-test(5).

       v4l
         The sane-v4l library implements a SANE backend that provides  generic
         access  to  video  cameras and similar equipment using the V4L (Video
         for Linux) API. See sane-v4l(5).

       Also,   have   a   look   at   the   backend   information   page    at
       http://www.sane-project.org/sane-supported-devices.html and the list of
       projects in /usr/share/doc/libsane/PROJECTS.

CHANGING THE TOP-LEVEL BACKEND

       By default, all SANE backends (drivers) are loaded dynamically  by  the
       sane-dll  meta  backend.  If  you  have any questions about the dynamic
       loading, read sane-dll(5).  SANE frontend can also be linked  to  other
       backends  directly  by  copying  or  linking a backend to libsane.so in
       /usr/lib/arch_triplet/sane.

DEVELOPER'S DOCUMENTATION

       It's not hard to write a SANE backend. It can take some time,  however.
       You  should  have  basic  knowledge  of  C  and enough patience to work
       through the documentation and find out how your scanner works. Appended
       is a list of some documents that help to write backends and frontends.

       The  SANE  standard defines the application programming interface (API)
       that is used to communicate between frontends and backends. It  can  be
       found  at /usr/share/doc/libsane/sane.ps (if latex is installed on your
       system) and  on  the  SANE  website:  http://www.sane-project.org/html/
       (HTML), or http://www.sane-project.org/sane.ps (Postscript).

       There     is    some    more    information    for    programmers    in
       /usr/share/doc/libsane/backend-writing.txt.  Most of the internal  SANE
       routines      (sanei)      are      documented      using      doxygen:
       http://www.sane-project.org/sanei/.  Before a new backend  or  frontend
       project  is started, have a look at /usr/share/doc/libsane/PROJECTS for
       projects  that  are  planned  or  not  yet  included  into   the   SANE
       distribution       and       at      our      bug-tracking      system:
       http://www.http://www.sane-project.org/bugs.html.

       There are some links on how  to  find  out  about  the  protocol  of  a
       scanner: http://www.meier-geinitz.de/sane/misc/develop.html.

       If  you  start writing a backend or frontend or any other part of SANE,
       please contact the sane-devel mailing list for coordination so the same
       work isn't done twice.

FILES

       /etc/sane.d/*.conf
              The backend configuration files.

       /usr/lib/arch_triplet/sane/libsane-*.a
              The static libraries implementing the backends.

       /usr/lib/arch_triplet/sane/libsane-*.so
              The  shared  libraries  implementing  the  backends  (present on
              systems that support dynamic loading).

       /usr/share/doc/libsane/*
              SANE  documentation:  The  standard,  READMEs,  text  files  for
              backends etc.

PROBLEMS

       If your device isn't found but you know that it is supported, make sure
       that it is  detected  by  your  operating  system.  For  SCSI  and  USB
       scanners,  use the sane-find-scanner tool (see sane-find-scanner(1) for
       details). It prints one line for each scanner it has detected and  some
       comments  (#). If sane-find-scanner finds your scanner only as root but
       not as normal user, the  permissions  for  the  device  files  are  not
       adjusted  correctly.  If  the scanner isn't found at all, the operating
       system hasn't detected it and may need some help. Depending on the type
       of your scanner, read sane-usb(5) or sane-scsi(5).  If your scanner (or
       other device) is not connected over the  SCSI  bus  or  USB,  read  the
       backend's manual page for details on how to set it up.

       Now  your  scanner is detected by the operating system but not by SANE?
       Try scanimage -L.   If  the  scanner  is  not  found,  check  that  the
       backend's name is mentioned in /etc/sane.d/dll.conf.  Some backends are
       commented out by default. Remove the comment sign for your  backend  in
       this  case.  Also  some backends aren't compiled at all if one of their
       prerequisites are missing. Examples  include  dc210,  dc240,  canon_pp,
       hpsj5s,  gphoto2,  pint,  qcam, v4l, net, sm3600, snapscan, pnm. If you
       need one of these backends and they aren't available,  read  the  build
       instructions  in the README file and the individual manual pages of the
       backends.

       Another reason for not being detected by scanimage -L may be a  missing
       or  wrong configuration in the backend's configuration file. While SANE
       tries  to  automatically  find  most  scanners,  some  can't  be  setup
       correctly  without  the intervention of the administrator. Also on some
       operating systems auto-detection may  not  work.  Check  the  backend's
       manual page for details.

       If your scanner is still not found, try setting the various environment
       variables that are available to assist in debugging.   The  environment
       variables are documented in the relevant manual pages.  For example, to
       get the maximum amount of debug information when testing a Mustek  SCSI
       scanner,  set  environment variables SANE_DEBUG_DLL, SANE_DEBUG_MUSTEK,
       and SANE_DEBUG_SANEI_SCSI to 128 and then invoke scanimage  -L  .   The
       debug messages for the dll backend tell if the mustek backend was found
       and loaded at all. The mustek messages explain what the mustek  backend
       is  doing while the SCSI debugging shows the low level handling. If you
       can't find out what's going on  by  checking  the  messages  carefully,
       contact  the  sane-devel  mailing  list  for  help  (see REPORTING BUGS
       below).

       Now that your scanner is found by scanimage  -L,  try  to  do  a  scan:
       scanimage  >image.pnm.   This  command  starts  a  scan for the default
       scanner with default settings. All the available options are listed  by
       running  scanimage  --help.   If scanning aborts with an error message,
       turn on debugging as mentioned  above.  Maybe  the  configuration  file
       needs  some tuning, e.g. to setup the path to a firmware that is needed
       by some scanners. See the backend's manual page  for  details.  If  you
       can't find out what's wrong, contact sane-devel.

       To  check  that  the SANE libraries are installed correctly you can use
       the test backend, even if you  don't  have  a  scanner  or  other  SANE
       device:

              scanimage -d test -T

       You  should  get  a list of PASSed tests. You can do the same with your
       backend by changing "test" to your backend's name.

       So now scanning with scanimage works and you want to  use  one  of  the
       graphical  frontends  like  xsane, xscanimage, or quiteinsane but those
       frontends don't detect  your  scanner?  One  reason  may  be  that  you
       installed two versions of SANE.  E.g. the version that was installed by
       your distribution  in  /usr  and  one  you  installed  from  source  in
       /usr/local/.   Make  sure  that  only one version is installed. Another
       possible reason is, that your system's dynamic loader  can't  find  the
       SANE  libraries.  For  Linux,  make  sure that /etc/ld.so.conf contains
       /usr/local/lib and does not contain /usr/local/lib/sane.  See also  the
       documentation of the frontends.

HOW CAN YOU HELP SANE

       We  appreciate  any help we can get. Please have a look at our web page
       about contributing to SANE: http://www.sane-project.org/contrib.html

CONTACT

       For reporting bugs or requesting new  features,  please  use  our  bug-
       tracking  system:  http://www.sane-project.org/bugs.html.  You can also
       contact the author of your backend directly. Usually the email  address
       can   be  found  in  the  /usr/share/doc/libsane/AUTHORS  file  or  the
       backend's manpage. For general discussion about SANE,  please  use  the
       SANE           mailing           list          sane-devel          (see
       http://www.sane-project.org/mailing-lists.html for details).

SEE ALSO

       saned(8),    sane-find-scanner(1),    scanimage(1),     sane-abaton(5),
       sane-agfafocus(5),             sane-apple(5),            sane-artec(5),
       sane-artec_eplus48u(5),  sane-as6e(5),   sane-avision(5),   sane-bh(5),
       sane-canon(5),  sane-canon630u(5),  sane-canon_dr(5), sane-canon_pp(5),
       sane-cardscan(5), sane-coolscan2(5),  sane-coolscan(5),  sane-dc210(5),
       sane-dc240(5),  sane-dc25(5),  sane-dll(5), sane-dmc(5), sane-epson(5),
       sane-fujitsu(5),  sane-genesys(5),   sane-gphoto2(5),   sane-gt68xx(5),
       sane-hp(5),     sane-hpsj5s(5),     sane-hp3500(5),     sane-hp3900(5),
       sane-hp4200(5),   sane-hp5400(5),    sane-hpljm1005(5),    sane-ibm(5),
       sane-kodak(5),     sane-leo(5),     sane-lexmark(5),    sane-ma1509(5),
       sane-matsushita(5),        sane-microtek2(5),         sane-microtek(5),
       sane-mustek(5),          sane-mustek_pp(5),         sane-mustek_usb(5),
       sane-mustek_usb2(5),    sane-nec(5),    sane-net(5),     sane-niash(5),
       sane-pie(5),    sane-pint(5),    sane-plustek(5),   sane-plustek_pp(5),
       sane-pnm(5),      sane-qcam(5),      sane-ricoh(5),      sane-s9036(5),
       sane-sceptre(5),     sane-scsi(5),    sane-sharp(5),    sane-sm3600(5),
       sane-sm3840(5),   sane-snapscan(5),    sane-sp15c(5),    sane-st400(5),
       sane-stv680(5),    sane-tamarack(5),    sane-teco1(5),   sane-teco2(5),
       sane-teco3(5),    sane-test(5),     sane-u12(5),     sane-umax1220u(5),
       sane-umax(5), sane-umax_pp(5), sane-usb(5), sane-v4l(5)

AUTHOR

       David      Mosberger-Tang      and      many     many     more     (see
       /usr/share/doc/libsane/AUTHORS for details).  This man page was written
       by  Henning  Meier-Geinitz. Quite a lot of text was taken from the SANE
       standard, several man pages, and README files.

                                  14 Jul 2008                          sane(7)