Provided by: cwdaemon_0.9.4-9_amd64 bug

NAME

       cwdaemon - morse daemon for the serial or parallel port

SYNOPSIS

       cwdaemon [options] ...

DESCRIPTION

       Cwdaemon  is  a  small  daemon  which  uses  the  pc  parallel or serial port and a simple
       transistor switch to output morse code to a transmitter from a text message sent to it via
       udp port 6789.

OPTIONS

       -d <device> Use a different device for keying.

       -h Show summary of options.

       -n Do not fork and print debug information to stdout.

       -p <port> Use a different UDP port number (default = 6789).

       -P <priority> Set cwdaemon priority, -20 to 20 (default = 0).

       -s <speed> Set speed, value larger than 4 (default = 24).

       -t <time> Set PTT delay, value from 0 to 50 ms (default = 0).

       -v <volume> Set volume for soundcard output.

       -V Output version information and exit.

       -w <weight> Set weighting, value from -50 to 50 (default = 0).

       -x <sdevice> Set sound device to be used.

DEVICES

       Any  serial  device that supports getting and setting the modem control lines can be used.
       On Linux, ttyS0, ttyS1, etc. will work.  On FreeBSD these  devices  are  known  as  ttyd0,
       ttyd1,  etc.  On OpenBSD, these same devices are known as tty00, tty01, etc., but may vary
       with platform.

       For parallel ports on Linux try parport0 (default)  or  parport1,  and  on  FreeBSD,  ppi0
       (default),  ppi1,  etc.  OpenBSD does not support parallel port operation, and defaults to
       'tty00'.

       For completeness, a 'null' device is provided.  This device does exactly nothing  (no  rig
       keying, no ssb keying, etc.).

SOUND DEVICES

       Sdevice  should  be one of 'c' (console), 's' (soundcard), 'b' (both), or 'n' (none).  The
       default is console, which is the PC speaker.

SEE ALSO

       The provided README in /usr/share/cwdaemon for a description of the circuitry,  usage  and
       testing of cwdaemon.

AUTHOR

       Cwdaemon  was  written  by  Joop  Stakenborg  <pg4i  at amsat.org>, Rein Couperus <pa0r at
       amsat.org>, Wolf-Ruediger Juergens, DL2WRJ <WJuergens at t-online.de> and  Ladislav  Vaiz,
       OK1ZIA  <ok1zia at nagano.cz>. Cwlib is taken and adapted from the unixcw package, version
       2.2 by Simon Baldwin, G0FRD.  FreeBSD support mostly done by Diane Bruce, VA3DB.   OpenBSD
       support by Jason L. Wright, AI4JW.

       Code maintainer for cwdaemon is Joop, pg4i at amsat.org.

                                                                                      CWDAEMON(8)