Provided by: openswan_2.6.37-1_i386
ipsec_tncfg - manipulate KLIPS virtual interfaces
ipsec tncfg --create virtual
ipsec tncfg --delete virtual
ipsec tncfg --attach --virtual virtual --physical physical
ipsec tncfg --detach --virtual virtual
ipsec tncfg --clear
ipsec tncfg --version
ipsec tncfg --help
Note that tncfg is only supported on the classic KLIPS stack. It is not
supported on any other stack and will be completely removed in future
versions. A replacement command still needs to be designed
The historical use of tncfg is to attach/detach IPsec virtual
interfaces (e.g. ipsec0) to/from physical interfaces (e.g. eth0)
through which packets will be forwarded once processed by KLIPS.
The modern use of tncfg is to create and delete virtual interfaces
known as mastXXX. mast stands for Mooring and XXX.
The form with no additional arguments lists the contents of
/proc/net/ipsec_tncfg. The format of /proc/net/ipsec_tncfg is discussed
The --attach form attaches the virtual interface to the physical one.
The --detach form detaches the virtual interface from whichever
physical interface it is attached to.
The --clear form clears all the virtual interfaces from whichever
physical interfaces they were attached to.
Virtual interfaces typically have names like ipsec0 or mast0 while
physical interfaces typically have names like eth0 or ppp0.
ipsec tncfg --create mast12
creates the mast12 device.
ipsec tncfg --create ipsec4
creates an ipsec4 device, but does not attach it.
ipsec tncfg --attach --virtual ipsec0 --physical eth0
attaches the ipsec0 virtual device to the eth0 physical device.
ipsec(8), ipsec_manual(8), ipsec_eroute(8), ipsec_spi(8),
ipsec_spigrp(8), ipsec_klipsdebug(8), ipsec_tncfg(5)
Written for the Linux FreeS/WAN project <http://www.freeswan.org/> by
Richard Guy Briggs.
[FIXME: source] 10/06/2010 IPSEC_TNCFG(8)