Provided by: pciutils_3.1.8-2ubuntu5_i386 bug

NAME

       setpci - configure PCI devices

SYNOPSIS

       setpci [options] devices operations...

DESCRIPTION

       setpci is a utility for querying and configuring PCI devices.

       All numbers are entered in hexadecimal notation.

       Root  privileges  are  necessary  for  almost all operations, excluding
       reads of the  standard  header  of  the  configuration  space  on  some
       operating systems.  Please see lspci(8) for details on access rights.

OPTIONS

   General options
       -v     Tells  setpci  to  be  verbose  and display detailed information
              about configuration space accesses.

       -f     Tells setpci not to complain when there's nothing to do (when no
              devices  are  selected).   This  option  is  intended for use in
              widely-distributed configuration scripts  where  it's  uncertain
              whether the device in question is present in the machine or not.

       -D     `Demo  mode'  --  don't  write  anything  to  the  configuration
              registers.  It's useful to try setpci -vD to  verify  that  your
              complex  sequence  of  setpci  operations does what you think it
              should do.

       --version
              Show setpci version. This option should be used stand-alone.

       --help Show detailed help on available options. This option  should  be
              used stand-alone.

       --dumpregs
              Show  a  list  of all known PCI registers and capabilities. This
              option should be used stand-alone.

   PCI access options
       The PCI utilities use the PCI library  to  talk  to  PCI  devices  (see
       pcilib(7)  for details). You can use the following options to influence
       its behavior:

       -A <method>
              The library supports a variety of  methods  to  access  the  PCI
              hardware.    By   default,  it  uses  the  first  access  method
              available,  but  you  can  use  this  option  to  override  this
              decision.  See -A help for a list of available methods and their
              descriptions.

       -O <param>=<value>
              The behavior of the  library  is  controlled  by  several  named
              parameters.   This  option allows to set the value of any of the
              parameters. Use -O help for a list of known parameters and their
              default values.

       -H1    Use  direct hardware access via Intel configuration mechanism 1.
              (This is a shorthand for -A intel-conf1.)

       -H2    Use direct hardware access via Intel configuration mechanism  2.
              (This is a shorthand for -A intel-conf2.)

       -G     Increase debug level of the library.

DEVICE SELECTION

       Before each sequence of operations you need to select which devices you
       wish that operation to affect.

       -s [[[[<domain>]:]<bus>]:][<slot>][.[<func>]]
              Consider only devices in the  specified  domain  (in  case  your
              machine has several host bridges, they can either share a common
              bus number space or each of them can address a PCI domain of its
              own;  domains  are numbered from 0 to ffff), bus (0 to ff), slot
              (0 to 1f) and function (0 to 7).  Each component of  the  device
              address  can be omitted or set to "*", both meaning "any value".
              All numbers are hexadecimal.  E.g., "0:" means  all  devices  on
              bus  0,  "0"  means  all functions of device 0 on any bus, "0.3"
              selects third function of device 0 on all buses and ".4" matches
              only the fourth function of each device.

       -d [<vendor>]:[<device>]
              Select  devices  with  specified vendor and device ID. Both ID's
              are given in hexadecimal and may be omitted  or  given  as  "*",
              both meaning "any value".

       When  -s and -d are combined, only devices that match both criteria are
       selected. When multiple options of the same  kind  are  specified,  the
       rightmost one overrides the others.

OPERATIONS

       There  are  two  kinds  of  operations:  reads  and  writes.  To read a
       register,   just   specify   its   name.   Writes   have    the    form
       name=value,value...  where each value is either a hexadecimal number or
       an  expression  of  type  data:mask  where  both  data  and  mask   are
       hexadecimal numbers. In the latter case, only the bits corresponding to
       binary ones in the mask are  changed  (technically,  this  is  a  read-
       modify-write operation).

       There are several ways how to identity a register:

       o      Tell its address in hexadecimal.

       o      Spell  its  name. Setpci knows the names of all registers in the
              standard configuration headers. Use `setpci --dumpregs'  to  get
              the  complete  list.  See PCI bus specifications for the precise
              meaning   of   these   registers   or   consult   header.h    or
              /usr/include/pci/pci.h for a brief sketch.

       o      If  the  register is a part of a PCI capability, you can specify
              the name of the capability to  get  the  address  of  its  first
              register.  See  the names starting with `CAP_' or `ECAP_' in the
              --dumpregs output.

       o      If the name of the capability is not known to  setpci,  you  can
              refer  to it by its number in the form CAPid or ECAPid, where id
              is the numeric identifier of the capability in hexadecimal.

       o      Each of the previous formats can be followed by +offset  to  add
              an  offset  (a  hex  number) to the address. This feature can be
              useful for addressing of registers living within  a  capability,
              or  to  modify  parts  of standard registers.  IP o Finally, you
              should append a width specifier .B, .W, or .L to choose how many
              bytes  (1,  2,  or  4)  should  be transferred. The width can be
              omitted if you are referring to a register by its name  and  the
              width of the register is well known.

       All names of registers and width specifiers are case-insensitive.

EXAMPLES

       COMMAND
              asks for the word-sized command register.

       4.w    is a numeric address of the same register.

       COMMAND.l
              asks  for  a 32-bit word starting at the location of the command
              register, i.e., the command and status registers together.

       VENDOR_ID+1.b
              specifies the upper byte of the vendor  ID  register  (remember,
              PCI is little-endian).

       CAP_PM+2.w
              corresponds   to   the  second  word  of  the  power  management
              capability.

       ECAP108.l
              asks for the first 32-bit word of the extended  capability  with
              ID 0x108.

SEE ALSO

       lspci(8), pcilib(7)

AUTHOR

       The PCI Utilities are maintained by Martin Mares <mj@ucw.cz>.