Provided by: freebsd-manpages_8.2-1_all bug


     net80211 — 802.11 network layer


     #include <net80211/ieee80211_var.h>

     ieee80211_ifattach(struct ieee80211com *ic,
         const uint8_t macaddr[IEEE80211_ADDR_LEN]);

     ieee80211_ifdetach(struct ieee80211com *ic);


     IEEE 802.11 device drivers are written to use the infrastructure provided
     by the net80211 software layer.  This software provides a support
     framework for drivers that includes ifnet cloning, state management, and
     a user management API by which applications interact with 802.11 devices.
     Most drivers depend on the net80211 layer for protocol services but
     devices that off-load functionality may bypass the layer to connect
     directly to the device (e.g. the ndis(4) emulation support does this).

     A net80211 device driver implements a virtual radio API that is exported
     to users through network interfaces (aka vaps) that are cloned from the
     underlying device.  These interfaces have an operating mode (station,
     adhoc, hostap, wds, monitor, etc.)  that is fixed for the lifetime of the
     interface.  Devices that can support multiple concurrent interfaces allow
     multiple vaps to be cloned.  This enables construction of interesting
     applications such as an AP vap and one or more WDS vaps or multiple AP
     vaps, each with a different security model.  The net80211 layer
     virtualizes most 802.11 state and coordinates vap state changes including
     scheduling multiple vaps.  State that is not virtualized includes the
     current channel and WME/WMM parameters.  Protocol processing is typically
     handled entirely in the net80211 layer with drivers responsible purely
     for moving data between the host and device.  Similarly, net80211 handles
     most ioctl(2) requests without entering the driver; instead drivers are
     notified of state changes that require their involvement.

     The virtual radio interface defined by the net80211 layer means that
     drivers must be structured to follow specific rules.  Drivers that
     support only a single interface at any time must still follow these


     The virtual radio architecture splits state between a single per-device
     ieee80211com structure and one or more ieee80211vap structures.  Drivers
     are expected to setup various shared state in these structures at device
     attach and during vap creation but otherwise should treat them as read-
     only.  The ieee80211com structure is allocated by the net80211 layer as
     adjunct data to a device's ifnet; it is accessed through the if_l2com
     structure member.  The ieee80211vap structure is allocated by the driver
     in the “vap create” method and should be extended with any driver-private
     state.  This technique of giving the driver control to allocate data
     structures is used for other net80211 data structures and should be
     exploited to maintain driver-private state together with public net80211

     The other main data structures are the station, or node, table that
     tracks peers in the local BSS, and the channel table that defines the
     current set of available radio channels.  Both tables are bound to the
     ieee80211com structure and shared by all vaps.  Long-lasting references
     to a node are counted to guard against premature reclamation.  In
     particular every packet sent/received holds a node reference (either
     explicitly for transmit or implicitly on receive).

     The ieee80211com and ieee80211vap structures also hold a collection of
     method pointers that drivers fill-in and/or override to take control of
     certain operations.  These methods are the primary way drivers are bound
     to the net80211 layer and are described below.


     Drivers attach to the net80211 layer with the ieee80211_ifattach()
     function.  The driver is expected to allocate and setup any device-
     private data structures before passing control.  The ieee80211com
     structure must be pre-initialized with state required to setup the
     net80211 layer:

     ic_ifp       Backpointer to the physical device's ifnet.

     ic_caps      Device/driver capabilities; see below for a complete

     ic_channels  Table of channels the device is capable of operating on.
                  This is initially provided by the driver but may be changed
                  through calls that change the regulatory state.

     ic_nchan     Number of entries in ic_channels.

     On return from ieee80211_ifattach() the driver is expected to override
     default callback functions in the ieee80211com structure to register it's
     private routines.  Methods marked with a “*” must be provided by the

                  Create a vap instance of the specified type (operating
                  mode).  Any fixed BSSID and/or MAC address is provided.
                  Drivers that support multi-bssid operation may honor the
                  requested BSSID or assign their own.

                  Destroy a vap instance created with ic_vap_create.

                  Return the list of calibrated channels for the radio.  The
                  default method returns the current list of channels (space

                  Process a request to change regulatory state.  The routine
                  may reject a request or constrain changes (e.g. reduce
                  transmit power caps).  The default method accepts all
                  proposed changes.

                  Send an 802.11 management frame.  The default method
                  fabricates the frame using net80211 state and passes it to
                  the driver through the ic_raw_xmit method.

     ic_raw_xmit  Transmit a raw 802.11 frame.  The default method drops the
                  frame and generates a message on the console.

                  Update hardware state after an 802.11 IFS slot time change,
                  There is no default method; the pointer may be NULL in which
                  case it will not be used.

                  Update hardware for a change in the multicast packet filter,
                  The default method prints a console message.

                  Update hardware for a change in the promiscuous mode
                  setting.  The default method prints a console message.

     ic_newassoc  Update driver/device state for association to a new AP (in
                  station mode) or when a new station associates (e.g. in AP
                  mode).  There is no default method; the pointer may be NULL
                  in which case it will not be used.

                  Allocate and initialize a ieee80211_node structure.  This
                  method cannot sleep.  The default method allocates zero'd
                  memory using malloc(9).  Drivers should override this method
                  to allocate extended storage for their own needs.  Memory
                  allocated by the driver must be tagged with M_80211_NODE to
                  balance the memory allocation statistics.

                  Reclaim storage of a node allocated by ic_node_alloc.
                  Drivers are expected to interpose their own method to
                  cleanup private state but must call through this method to
                  allow net80211 to reclaim it's private state.

                  Cleanup state in a ieee80211_node created by ic_node_alloc.
                  This operation is distinguished from ic_node_free in that it
                  may be called long before the node is actually reclaimed to
                  cleanup adjunct state.  This can happen, for example, when a
                  node must not be reclaimed due to references held by packets
                  in the transmit queue.  Drivers typically interpose
                  ic_node_cleanup instead of ic_node_free.

     ic_node_age  Age, and potentially reclaim, resources associated with a
                  node.  The default method ages frames on the power-save
                  queue (in AP mode) and pending frames in the receive reorder
                  queues (for stations using A-MPDU).

                  Reclaim all optional resources associated with a node.  This
                  call is used to free up resources when they are in short

                  Return the Receive Signal Strength Indication (RSSI) in .5
                  dBm units for the specified node.  This interface returns a
                  subset of the information returned by ic_node_getsignal, The
                  default method calculates a filtered average over the last
                  ten samples passed in to ieee80211_input(9) or

                  Return the RSSI and noise floor (in .5 dBm units) for a
                  station.  The default method calculates RSSI as described
                  above; the noise floor returned is the last value supplied
                  to ieee80211_input(9) or ieee80211_input_all(9).

                  Return MIMO radio state for a station in support of the
                  IEEE80211_IOC_STA_INFO ioctl request.  The default method
                  returns nothing.

                  Prepare driver/hardware state for scanning.  This callback
                  is done in a sleepable context.

                  Restore driver/hardware state after scanning completes.
                  This callback is done in a sleepable context.

                  Set the current radio channel using ic_curchan.  This
                  callback is done in a sleepable context.

                  Start scanning on a channel.  This method is called
                  immediately after each channel change and must initiate the
                  work to scan a channel and schedule a timer to advance to
                  the next channel in the scan list.  This callback is done in
                  a sleepable context.  The default method handles active scan
                  work (e.g. sending ProbeRequest frames), and schedules a
                  call to ieee80211_scan_next(9) according to the maximum
                  dwell time for the channel.  Drivers that off-load scan work
                  to firmware typically use this method to trigger per-channel
                  scan activity.

                  Handle reaching the minimum dwell time on a channel when
                  scanning.  This event is triggered when one or more stations
                  have been found on a channel and the minimum dwell time has
                  been reached.  This callback is done in a sleepable context.
                  The default method signals the scan machinery to advance to
                  the next channel as soon as possible.  Drivers can use this
                  method to preempt further work (e.g. if scanning is handled
                  by firmware) or ignore the request to force maximum dwell
                  time on a channel.

                  Process a received Action frame.  The default method points
                  to ieee80211_recv_action(9) which provides a mechanism for
                  setting up handlers for each Action frame class.

                  Transmit an Action frame.  The default method points to
                  ieee80211_send_action(9) which provides a mechanism for
                  setting up handlers for each Action frame class.

                  Check if transmit A-MPDU should be enabled for the specified
                  station and AC.  The default method checks a per-AC traffic
                  rate against a per-vap threshold to decide if A-MPDU should
                  be enabled.  This method also rate-limits ADDBA requests so
                  that requests are not made too frequently when a receiver
                  has limited resources.

                  Request A-MPDU transmit aggregation.  The default method
                  sets up local state and issues an ADDBA Request Action
                  frame.  Drivers may interpose this method if they need to
                  setup private state for handling transmit A-MPDU.

                  Process a received ADDBA Response Action frame and setup
                  resources as needed for doing transmit A-MPDU,

                  Shutdown an A-MPDU transmit stream for the specified station
                  and AC.  The default method reclaims local state after
                  sending a DelBA Action frame.

                  Process a response to a transmitted BAR control frame.

                  Prepare to receive A-MPDU data from the specified station
                  for the TID.

                  Terminate receipt of A-MPDU data from the specified station
                  for the TID.

     Once the net80211 layer is attached to a driver there are two more steps
     typically done to complete the work:

     1.   Setup “radiotap support” for capturing raw 802.11 packets that pass
          through the device.  This is done with a call to

     2.   Do any final device setup like enabling interrupts.

     State is torn down and reclaimed with a call to ieee80211_ifdetach().
     Note this call may result in multiple callbacks into the driver so it
     should be done before any critical driver state is reclaimed.  On return
     from ieee80211_ifdetach() all associated vaps and ifnet structures are
     reclaimed or inaccessible to user applications so it is safe to teardown
     driver state without worry about being re-entered.  The driver is
     responsible for calling if_free(9) on the ifnet it allocated for the
     physical device.


     Driver/device capabilities are specified using several sets of flags in
     the ieee80211com structure.  General capabilities are specified by
     ic_caps.  Hardware cryptographic capabilities are specified by
     ic_cryptocaps.  802.11n capabilities, if any, are specified by ic_htcaps.
     The net80211 layer propagates a subset of these capabilities to each vap
     through the equivalent fields: iv_caps, iv_cryptocaps, and iv_htcaps.
     The following general capabilities are defined:

     IEEE80211_C_STA        Device is capable of operating in station (aka
                            Infrastructure) mode.

     IEEE80211_C_8023ENCAP  Device requires 802.3-encapsulated frames be
                            passed for transmit.  By default net80211 will
                            encapsulate all outbound frames as 802.11 frames
                            (without a PLCP header).

     IEEE80211_C_FF         Device supports Atheros Fast-Frames.

     IEEE80211_C_TURBOP     Device supports Atheros Dynamic Turbo mode.

     IEEE80211_C_IBSS       Device is capable of operating in adhoc/IBSS mode.

     IEEE80211_C_PMGT       Device supports dynamic power-management (aka
                            power save) in station mode.

     IEEE80211_C_HOSTAP     Device is capable of operating as an Access Point
                            in Infrastructure mode.

     IEEE80211_C_AHDEMO     Device is capable of operating in Adhoc Demo mode.
                            In this mode the device is used purely to
                            send/receive raw 802.11 frames.

     IEEE80211_C_SWRETRY    Device supports software retry of transmitted

     IEEE80211_C_TXPMGT     Device support dynamic transmit power changes on
                            transmitted frames; also known as Transmit Power
                            Control (TPC).

     IEEE80211_C_SHSLOT     Device supports short slot time operation (for

                            Device supports short preamble operation (for

     IEEE80211_C_MONITOR    Device is capable of operating in monitor mode.

     IEEE80211_C_DFS        Device supports radar detection and/or DFS.  DFS
                            protocol support can be handled by net80211 but
                            the device must be capable of detecting radar

     IEEE80211_C_MBSS       Device is capable of operating in MeshBSS (MBSS)
                            mode (as defined by 802.11s Draft 3.0).

     IEEE80211_C_WPA1       Device supports WPA1 operation.

     IEEE80211_C_WPA2       Device supports WPA2/802.11i operation.

     IEEE80211_C_BURST      Device supports frame bursting.

     IEEE80211_C_WME        Device supports WME/WMM operation (at the moment
                            this is mostly support for sending and receiving
                            QoS frames with EDCF).

     IEEE80211_C_WDS        Device supports transmit/receive of 4-address

     IEEE80211_C_BGSCAN     Device supports background scanning.

     IEEE80211_C_TXFRAG     Device supports transmit of fragmented 802.11

     IEEE80211_C_TDMA       Device is capable of operating in TDMA mode.

     The follow general crypto capabilities are defined.  In general net80211
     will fall-back to software support when a device is not capable of
     hardware acceleration of a cipher.  This can be done on a per-key basis.
     net80211 can also handle software Michael calculation combined with
     hardware AES acceleration.

     IEEE80211_CRYPTO_WEP   Device supports hardware WEP cipher.

     IEEE80211_CRYPTO_TKIP  Device supports hardware TKIP cipher.

                            Device supports hardware AES-OCB cipher.

                            Device supports hardware AES-CCM cipher.

                            Device supports hardware Michael for use with

     IEEE80211_CRYPTO_CKIP  Devices supports hardware CKIP cipher.

     The follow general 802.11n capabilities are defined.  The first
     capabilities are defined exactly as they appear in the 802.11n
     specification.  Capabilities beginning with IEEE80211_HTC_AMPDU are used
     soley by the net80211 layer.

                            Device supports 20/40 channel width operation.

                            Device supports dynamic SM power save operation.

                            Device supports static SM power save operation.

                            Device supports Greenfield preamble.

                            Device supports Short Guard Interval on 20MHz

                            Device supports Short Guard Interval on 40MHz

                            Device supports Space Time Block Convolution
                            (STBC) for transmit.

                            Device supports 1 spatial stream for STBC receive.

                            Device supports 1-2 spatial streams for STBC

                            Device supports 1-3 spatial streams for STBC

                            Device supports A-MSDU frames up to 7935 octets.

                            Device supports A-MSDU frames up to 3839 octets.

                            Device supports use of DSSS/CCK on 40MHz channels.

     IEEE80211_HTCAP_PSMP   Device supports PSMP.

                            Device is intolerant of 40MHz wide channel use.

                            Device supports L-SIG TXOP protection.

     IEEE80211_HTC_AMPDU    Device supports A-MPDU aggregation.  Note that any
                            802.11n compliant device must support A-MPDU
                            receive so this implicitly means support for
                            transmit of A-MPDU frames.

     IEEE80211_HTC_AMSDU    Device supports A-MSDU aggregation.  Note that any
                            802.11n compliant device must support A-MSDU
                            receive so this implicitly means support for
                            transmit of A-MSDU frames.

     IEEE80211_HTC_HT       Device supports High Throughput (HT) operation.
                            This capability must be set to enable 802.11n
                            functionality in net80211.

     IEEE80211_HTC_SMPS     Device supports MIMO Power Save operation.

     IEEE80211_HTC_RIFS     Device supports Reduced Inter Frame Spacing


     ioctl(2), ndis(4), ieee80211_amrr(9), ieee80211_beacon(9),
     ieee80211_bmiss(9), ieee80211_crypto(9), ieee80211_ddb(9),
     ieee80211_input(9), ieee80211_node(9), ieee80211_output(9),
     ieee80211_proto(9), ieee80211_radiotap(9), ieee80211_regdomain(9),
     ieee80211_scan(9), ieee80211_vap(9), ifnet(9), malloc(9)