Provided by: xterm_297-1ubuntu1_amd64 
NAME
xterm - terminal emulator for X
SYNOPSIS
xterm [-toolkitoption ...] [-option ...] [shell]
DESCRIPTION
The xterm program is a terminal emulator for the X Window System. It provides DEC VT102/VT220 and
selected features from higher-level terminals such as VT320/VT420/VT520 (VTxxx). It also provides
Tektronix 4014 emulation for programs that cannot use the window system directly. If the underlying
operating system supports terminal resizing capabilities (for example, the SIGWINCH signal in systems
derived from 4.3bsd), xterm will use the facilities to notify programs running in the window whenever it
is resized.
The VTxxx and Tektronix 4014 terminals each have their own window so that you can edit text in one and
look at graphics in the other at the same time. To maintain the correct aspect ratio (height/width),
Tektronix graphics will be restricted to the largest box with a 4014's aspect ratio that will fit in the
window. This box is located in the upper left area of the window.
Although both windows may be displayed at the same time, one of them is considered the “active” window
for receiving keyboard input and terminal output. This is the window that contains the text cursor. The
active window can be chosen through escape sequences, the “VT Options” menu in the VTxxx window, and the
“Tek Options” menu in the 4014 window.
EMULATIONS
The VT102 emulation is fairly complete, but does not support autorepeat. Double-size characters are
displayed properly if your font server supports scalable fonts. The VT220 emulation does not support
soft fonts, it is otherwise complete. Termcap(5) entries that work with xterm include an optional
platform-specific entry (“xterm”), “xterm”, “vt102”, “vt100”, “ansi” and “dumb”. xterm automatically
searches the termcap file in this order for these entries and then sets the “TERM” and the “TERMCAP”
environment variables. You may also use “vt220”, but must set the terminal emulation level with the
decTerminalID resource. (The “TERMCAP” environment variable is not set if xterm is linked against a
terminfo library, since the requisite information is not provided by the termcap emulation of terminfo
libraries).
Many of the special xterm features may be modified under program control through a set of escape
sequences different from the standard VT102 escape sequences. (See the Xterm Control Sequences
document.)
The Tektronix 4014 emulation is also fairly good. It supports 12-bit graphics addressing, scaled to the
window size. Four different font sizes and five different lines types are supported. There is no write-
through or defocused mode support. The Tektronix text and graphics commands are recorded internally by
xterm and may be written to a file by sending the COPY escape sequence (or through the Tektronix menu;
see below). The name of the file will be “COPYyyyy-MM-dd.hh:mm:ss”, where yyyy, MM, dd, hh, mm and ss
are the year, month, day, hour, minute and second when the COPY was performed (the file is created in the
directory xterm is started in, or the home directory for a login xterm).
Not all of the features described in this manual are necessarily available in this version of xterm.
Some (e.g., the non-VT220 extensions) are available only if they were compiled in, though the most
commonly-used are in the default configuration.
OTHER FEATURES
Xterm automatically highlights the text cursor when the pointer enters the window (selected) and
unhighlights it when the pointer leaves the window (unselected). If the window is the focus window, then
the text cursor is highlighted no matter where the pointer is.
In VT102 mode, there are escape sequences to activate and deactivate an alternate screen buffer, which is
the same size as the display area of the window. When activated, the current screen is saved and
replaced with the alternate screen. Saving of lines scrolled off the top of the window is disabled until
the normal screen is restored. The termcap(5) entry for xterm allows the visual editor vi(1) to switch
to the alternate screen for editing and to restore the screen on exit. A popup menu entry makes it
simple to switch between the normal and alternate screens for cut and paste.
In either VT102 or Tektronix mode, there are escape sequences to change the name of the windows.
Additionally, in VT102 mode, xterm implements the window-manipulation control sequences from dtterm, such
as resizing the window, setting its location on the screen.
Xterm allows character-based applications to receive mouse events (currently button-press and release
events, and button-motion events) as keyboard control sequences. See Xterm Control Sequences for
details.
OPTIONS
The xterm terminal emulator accepts the standard X Toolkit command line options as well as many
application-specific options. If the option begins with a `+' instead of a `-', the option is restored
to its default value. The -version and -help options are interpreted even if xterm cannot open the
display, and are useful for testing and configuration scripts. Along with -class, they are checked
before other options.
-version
This causes xterm to print a version number to the standard output, and then exit.
-help This causes xterm to print out a verbose message describing its options, one per line. The
message is written to the standard output. After printing the message, xterm exits. Xterm
generates this message, sorting it and noting whether a “-option” or a “+option” turns the
feature on or off, since some features historically have been one or the other. Xterm generates
a concise help message (multiple options per line) when an unknown option is used, e.g.,
xterm -z
If the logic for a particular option such as logging is not compiled into xterm, the help text for that
option also is not displayed by the -help option.
One parameter (after all options) may be given. That overrides xterm's built-in choice of shell program.
Normally xterm checks the SHELL variable. If that is not set, xterm tries to use the shell program
specified in the password file. If that is not set, xterm uses /bin/sh. If the parameter is not a
relative path, i.e., beginning with “./” or “../”, xterm looks for the file in the user's PATH. In
either case, it constructs an absolute path. The -e option cannot be used with this parameter since it
uses all parameters following the option.
The other options are used to control the appearance and behavior. Not all options are necessarily
configured into your copy of xterm:
-132 Normally, the VT102 DECCOLM escape sequence that switches between 80 and 132 column mode is
ignored. This option causes the DECCOLM escape sequence to be recognized, and the xterm window
will resize appropriately.
-ah This option indicates that xterm should always highlight the text cursor. By default, xterm will
display a hollow text cursor whenever the focus is lost or the pointer leaves the window.
+ah This option indicates that xterm should do text cursor highlighting based on focus.
-ai This option disables active icon support if that feature was compiled into xterm. This is
equivalent to setting the vt100 resource activeIcon to “false”.
+ai This option enables active icon support if that feature was compiled into xterm. This is
equivalent to setting the vt100 resource activeIcon to “true”.
-aw This option indicates that auto-wraparound should be allowed. This allows the cursor to
automatically wrap to the beginning of the next line when it is at the rightmost position of a
line and text is output.
+aw This option indicates that auto-wraparound should not be allowed.
-b number
This option specifies the size of the inner border (the distance between the outer edge of the
characters and the window border) in pixels. That is the vt100 internalBorder resource. The
default is “2”.
+bc turn off text cursor blinking. This overrides the cursorBlink resource.
-bc turn on text cursor blinking. This overrides the cursorBlink resource.
-bcf milliseconds
set the amount of time text cursor is off when blinking via the cursorOffTime resource.
-bcn milliseconds
set the amount of time text cursor is on when blinking via the cursorOffTime resource.
-bdc Set the vt100 resource colorBDMode to “false”, disabling the display of characters with bold
attribute as color
+bdc Set the vt100 resource colorBDMode to “true”, enabling the display of characters with bold
attribute as color rather than bold
-cb Set the vt100 resource cutToBeginningOfLine to “false”.
+cb Set the vt100 resource cutToBeginningOfLine to “true”.
-cc characterclassrange:value[,...]
This sets classes indicated by the given ranges for using in selecting by words. See the section
specifying character classes. and discussion of the charClass resource.
-cjk_width
Set the cjkWidth resource to “true”. When turned on, characters with East Asian Ambiguous (A)
category in UTR 11 have a column width of 2. Otherwise, they have a column width of 1. This may
be useful for some legacy CJK text terminal-based programs assuming box drawings and others to
have a column width of 2. It also should be turned on when you specify a TrueType CJK double-
width (bi-width/monospace) font either with -fa at the command line or faceName resource. The
default is “false”
+cjk_width
Reset the cjkWidth resource.
-class string
This option allows you to override xterm's resource class. Normally it is “XTerm”, but can be
set to another class such as “UXTerm” to override selected resources.
-cm This option disables recognition of ANSI color-change escape sequences. It sets the colorMode
resource to “false”.
+cm This option enables recognition of ANSI color-change escape sequences. This is the same as the
vt100 resource colorMode.
-cn This option indicates that newlines should not be cut in line-mode selections. It sets the
cutNewline resource to “false”.
+cn This option indicates that newlines should be cut in line-mode selections. It sets the
cutNewline resource to “true”.
-cr color
This option specifies the color to use for text cursor. The default is to use the same
foreground color that is used for text. It sets the cursorColor resource according to the
parameter.
-cu This option indicates that xterm should work around a bug in the more(1) program that causes it
to incorrectly display lines that are exactly the width of the window and are followed by a line
beginning with a tab (the leading tabs are not displayed). This option is so named because it
was originally thought to be a bug in the curses(3x) cursor motion package.
+cu This option indicates that xterm should not work around the more(1) bug mentioned above.
-dc This option disables the escape sequence to change dynamic colors: the vt100 foreground and
background colors, its text cursor color, the pointer cursor foreground and background colors,
the Tektronix emulator foreground and background colors, its text cursor color and highlight
color. The option sets the dynamicColors option to “false”.
+dc This option enables the escape sequence to change dynamic colors. The option sets the
dynamicColors option to “true”.
-e program [ arguments ... ]
This option specifies the program (and its command line arguments) to be run in the xterm window.
It also sets the window title and icon name to be the basename of the program being executed if
neither -T nor -n are given on the command line. This must be the last option on the command
line.
-en encoding
This option determines the encoding on which xterm runs. It sets the locale resource. Encodings
other than UTF-8 are supported by using luit. The -lc option should be used instead of -en for
systems with locale support.
-fb font
This option specifies a font to be used when displaying bold text. It sets the boldFont
resource.
This font must be the same height and width as the normal font, otherwise it is ignored. If only
one of the normal or bold fonts is specified, it will be used as the normal font and the bold
font will be produced by overstriking this font.
See also the discussion of boldMode and alwaysBoldMode resources.
-fa pattern
This option sets the pattern for fonts selected from the FreeType library if support for that
library was compiled into xterm. This corresponds to the faceName resource. When a CJK double-
width font is specified, you also need to turn on the cjkWidth resource.
See also the renderFont resource, which combines with this to determine whether FreeType fonts
are initially active.
-fbb This option indicates that xterm should compare normal and bold fonts bounding boxes to ensure
they are compatible. It sets the freeBoldBox resource to “false”.
+fbb This option indicates that xterm should not compare normal and bold fonts bounding boxes to
ensure they are compatible. It sets the freeBoldBox resource to “true”.
-fbx This option indicates that xterm should not assume that the normal and bold fonts have VT100
line-drawing characters. If any are missing, xterm will draw the characters directly. It sets
the forceBoxChars resource to “false”.
+fbx This option indicates that xterm should assume that the normal and bold fonts have VT100 line-
drawing characters. It sets the forceBoxChars resource to “true”.
-fd pattern
This option sets the pattern for double-width fonts selected from the FreeType library if support
for that library was compiled into xterm. This corresponds to the faceNameDoublesize resource.
-fi font
This option sets the font for active icons if that feature was compiled into xterm.
See also the discussion of the iconFont resource.
-fs size
This option sets the pointsize for fonts selected from the FreeType library if support for that
library was compiled into xterm. This corresponds to the faceSize resource.
-fullscreen
This option indicates that xterm should ask the window manager to let it use the full-screen for
display, e.g., without window decorations. It sets the fullscreen resource to “true”.
+fullscreen
This option indicates that xterm should not ask the window manager to let it use the full-screen
for display. It sets the fullscreen resource to “false”.
-fw font
This option specifies the font to be used for displaying wide text. By default, it will attempt
to use a font twice as wide as the font that will be used to draw normal text. If no double-
width font is found, it will improvise, by stretching the normal font. This corresponds to the
wideFont resource.
-fwb font
This option specifies the font to be used for displaying bold wide text. By default, it will
attempt to use a font twice as wide as the font that will be used to draw bold text. If no
double-width font is found, it will improvise, by stretching the bold font. This corresponds to
the wideBoldFont resource.
-fx font
This option specifies the font to be used for displaying the preedit string in the “OverTheSpot”
input method.
See also the discussion of the ximFont resource.
-hc color
(see -selbg).
-hf This option indicates that HP Function Key escape codes should be generated for function keys.
It sets the hpFunctionKeys resource to “true”.
+hf This option indicates that HP Function Key escape codes should not be generated for function
keys. It sets the hpFunctionKeys resource to “false”.
-hm Tells xterm to use highlightTextColor and highlightColor to override the reversed
foreground/background colors in a selection. It sets the highlightColorMode resource to “true”.
+hm Tells xterm not to use highlightTextColor and highlightColor to override the reversed
foreground/background colors in a selection. It sets the highlightColorMode resource to “false”.
-hold Turn on the hold resource, i.e., xterm will not immediately destroy its window when the shell
command completes. It will wait until you use the window manager to destroy/kill the window, or
if you use the menu entries that send a signal, e.g., HUP or KILL.
+hold Turn off the hold resource, i.e., xterm will immediately destroy its window when the shell
command completes.
-ie Turn on the ptyInitialErase resource, i.e., use the pseudo-terminal's sense of the stty erase
value.
+ie Turn off the ptyInitialErase resource, i.e., set the stty erase value using the kb string from
the termcap entry as a reference, if available.
-im Turn on the useInsertMode resource, which forces use of insert mode by adding appropriate entries
to the TERMCAP environment variable.
+im Turn off the useInsertMode resource.
-into windowId
Given an X window identifier (an integer, which can be hexadecimal, octal or decimal according to
whether it begins with "0x", "0" or neither), xterm will reparent its top-level shell widget to
that window. This is used to embed xterm within other applications.
For instance, there are scripts for Tcl/Tk and Gtk which can be used to demonstrate the feature.
When using Gtk, there is a limitation of that toolkit which requires that xterm's allowSendEvents
resource is enabled.
-j This option indicates that xterm should do jump scrolling. It corresponds to the jumpScroll
resource. Normally, text is scrolled one line at a time; this option allows xterm to move
multiple lines at a time so that it does not fall as far behind. Its use is strongly recommended
since it makes xterm much faster when scanning through large amounts of text. The VT100 escape
sequences for enabling and disabling smooth scroll as well as the “VT Options” menu can be used
to turn this feature on or off.
+j This option indicates that xterm should not do jump scrolling.
-k8 This option sets the allowC1Printable resource. When allowC1Printable is set, xterm overrides
the mapping of C1 control characters (code 128-159) to treat them as printable.
+k8 This option resets the allowC1Printable resource.
-kt keyboardtype
This option sets the keyboardType resource. Possible values include: “unknown”, “default”, “hp”,
“sco”, “sun”, “tcap” and “vt220”.
The value “unknown”, causes the corresponding resource to be ignored.
The value “default”, suppresses the associated resources hpFunctionKeys, scoFunctionKeys,
sunFunctionKeys, tcapFunctionKeys and sunKeyboard, using the Sun/PC keyboard layout.
-l Turn logging on. Normally logging is not supported, due to security concerns. Some versions of
xterm may have logging enabled. The logfile is written to the directory from which xterm is
invoked. The filename is generated, of the form
XtermLog.XXXXXX
or
Xterm.log.hostname.yyyy.mm.dd.hh.mm.ss.XXXXXX
depending on how xterm was built.
+l Turn logging off.
-lc Turn on support of various encodings according to the users' locale setting, i.e., LC_ALL,
LC_CTYPE, or LANG environment variables. This is achieved by turning on UTF-8 mode and by
invoking luit for conversion between locale encodings and UTF-8. (luit is not invoked in UTF-8
locales.) This corresponds to the locale resource.
The actual list of encodings which are supported is determined by luit. Consult the luit manual
page for further details.
See also the discussion of the -u8 option which supports UTF-8 locales.
+lc Turn off support of automatic selection of locale encodings. Conventional 8bit mode or, in UTF-8
locales or with -u8 option, UTF-8 mode will be used.
-lcc path
File name for the encoding converter from/to locale encodings and UTF-8 which is used with -lc
option or locale resource. This corresponds to the localeFilter resource.
-leftbar
Force scrollbar to the left side of VT100 screen. This is the default, unless you have set the
rightScrollBar resource.
-lf filename
Specify the log-filename. See the -l option.
-ls This option indicates that the shell that is started in the xterm window will be a login shell
(i.e., the first character of argv[0] will be a dash, indicating to the shell that it should read
the user's .login or .profile).
The -ls flag and the loginShell resource are ignored if -e is also given, because xterm does not
know how to make the shell start the given command after whatever it does when it is a login
shell - the user's shell of choice need not be a Bourne shell after all. Also, xterm -e is
supposed to provide a consistent functionality for other applications that need to start text-
mode programs in a window, and if loginShell were not ignored, the result of ~/.profile might
interfere with that.
If you do want the effect of -ls and -e simultaneously, you may get away with something like
xterm -e /bin/bash -l -c "my command here"
Finally, -ls is not completely ignored, because xterm -ls -e does write a /var/log/wtmp entry (if
configured to do so), whereas xterm -e does not.
-maximized
This option indicates that xterm should ask the window manager to maximize its layout on startup.
This corresponds to the maximized resource.
Maximizing is not the reverse of iconifying; it is possible to do both with certain window
managers.
+maximized
This option indicates that xterm should ask the window manager to not maximize its layout on
startup.
+ls This option indicates that the shell that is started should not be a login shell (i.e., it will
be a normal “subshell”).
-mb This option indicates that xterm should ring a margin bell when the user types near the right end
of a line.
+mb This option indicates that margin bell should not be rung.
-mc milliseconds
This option specifies the maximum time between multi-click selections.
-mesg Turn off the messages resource, i.e., disallow write access to the terminal.
+mesg Turn on the messages resource, i.e., allow write access to the terminal.
-mk_width
Set the mkWidth resource to “true”. This makes xterm use a built-in version of the wide-
character width calculation. The default is “false”
+mk_width
Reset the mkWidth resource.
-ms color
This option specifies the color to be used for the pointer cursor. The default is to use the
foreground color. This sets the pointerColor resource.
-nb number
This option specifies the number of characters from the right end of a line at which the margin
bell, if enabled, will ring. The default is “10”.
-nul This option disables the display of underlining.
+nul This option enables the display of underlining.
-pc This option enables the PC-style use of bold colors (see boldColors resource).
+pc This option disables the PC-style use of bold colors.
-pob This option indicates that the window should be raised whenever a Control-G is received.
+pob This option indicates that the window should not be raised whenever a Control-G is received.
-rightbar
Force scrollbar to the right side of VT100 screen.
-rvc This option disables the display of characters with reverse attribute as color.
+rvc This option enables the display of characters with reverse attribute as color.
-rw This option indicates that reverse-wraparound should be allowed. This allows the cursor to back
up from the leftmost column of one line to the rightmost column of the previous line. This is
very useful for editing long shell command lines and is encouraged. This option can be turned on
and off from the “VT Options” menu.
+rw This option indicates that reverse-wraparound should not be allowed.
-s This option indicates that xterm may scroll asynchronously, meaning that the screen does not have
to be kept completely up to date while scrolling. This allows xterm to run faster when network
latencies are very high and is typically useful when running across a very large internet or many
gateways.
+s This option indicates that xterm should scroll synchronously.
-samename
Does not send title and icon name change requests when the request would have no effect: the name
is not changed. This has the advantage of preventing flicker and the disadvantage of requiring
an extra round trip to the server to find out the previous value. In practice this should never
be a problem.
+samename
Always send title and icon name change requests.
-sb This option indicates that some number of lines that are scrolled off the top of the window
should be saved and that a scrollbar should be displayed so that those lines can be viewed. This
option may be turned on and off from the “VT Options” menu.
+sb This option indicates that a scrollbar should not be displayed.
-selbg color
This option specifies the color to use for the background of selected text. If not specified,
reverse video is used. See the discussion of the highlightColor resource.
-selfg color
This option specifies the color to use for selected text. If not specified, reverse video is
used. See the discussion of the highlightTextColor resource.
-sf This option indicates that Sun Function Key escape codes should be generated for function keys.
+sf This option indicates that the standard escape codes should be generated for function keys.
-sh number
scale line-height values by the given number. See the discussion of the scaleHeight resource.
-si This option indicates that output to a window should not automatically reposition the screen to
the bottom of the scrolling region. This option can be turned on and off from the “VT Options”
menu.
+si This option indicates that output to a window should cause it to scroll to the bottom.
-sk This option indicates that pressing a key while using the scrollbar to review previous lines of
text should cause the window to be repositioned automatically in the normal position at the
bottom of the scroll region.
+sk This option indicates that pressing a key while using the scrollbar should not cause the window
to be repositioned.
-sl number
This option specifies the number of lines to save that have been scrolled off the top of the
screen. This corresponds to the saveLines resource. The default is “64”.
-sm This option, corresponding to the sessionMgt resource, indicates that xterm should set up session
manager callbacks.
+sm This option indicates that xterm should not set up session manager callbacks.
-sp This option indicates that Sun/PC keyboard should be assumed, providing mapping for keypad “+' to
“,', and CTRL-F1 to F13, CTRL-F2 to F14, etc.
+sp This option indicates that the standard escape codes should be generated for keypad and function
keys.
-t This option indicates that xterm should start in Tektronix mode, rather than in VT102 mode.
Switching between the two windows is done using the “Options” menus. Termcap(5) entries that
work with xterm “tek4014”, “tek4015”, “tek4012”, “tek4013”, “tek4010”, and “dumb”. xterm
automatically searches the termcap file in this order for these entries and then sets the “TERM”
and the “TERMCAP” environment variables.
+t This option indicates that xterm should start in VT102 mode.
-tb This option, corresponding to the toolBar resource, indicates that xterm should display a toolbar
(or menubar) at the top of its window. The buttons in the toolbar correspond to the popup menus,
e.g., control/left/mouse for “Main Options”.
+tb This option indicates that xterm should not set up a toolbar.
-ti term_id
Specify the name used by xterm to select the correct response to terminal ID queries. It also
specifies the emulation level, used to determine the type of response to a DA control sequence.
Valid values include vt52, vt100, vt101, vt102, vt220, and vt240 (the “vt” is optional). The
default is “vt420”. The term_id argument specifies the terminal ID to use. (This is the same as
the decTerminalID resource).
-tm string
This option specifies a series of terminal setting keywords followed by the characters that
should be bound to those functions, similar to the stty program. The keywords and their values
are described in detail in the ttyModes resource.
-tn name
This option specifies the name of the terminal type to be set in the TERM environment variable.
It corresponds to the termName resource. This terminal type must exist in the terminal database
(termcap or terminfo, depending on how xterm is built) and should have li# and co# entries. If
the terminal type is not found, xterm uses the built-in list “xterm”, “vt102”, etc.
-u8 This option sets the utf8 resource. When utf8 is set, xterm interprets incoming data as UTF-8.
This sets the wideChars resource as a side-effect, but the UTF-8 mode set by this option prevents
it from being turned off. If you must turn it on and off, use the wideChars resource.
This option and the utf8 resource are overridden by the -lc and -en options and locale resource.
That is, if xterm has been compiled to support luit, and the locale resource is not “false” this
option is ignored. We recommend using the -lc option or the “locale: true” resource in UTF-8
locales when your operating system supports locale, or -en UTF-8 option or the “locale: UTF-8”
resource when your operating system does not support locale.
+u8 This option resets the utf8 resource.
-uc This option makes the cursor underlined instead of a box.
+uc This option makes the cursor a box instead of underlined.
-ulc This option disables the display of characters with underline attribute as color rather than with
underlining.
+ulc This option enables the display of characters with underline attribute as color rather than with
underlining.
-ulit This option, corresponding to the italicULMode resource, disables the display of characters with
underline attribute as italics rather than with underlining.
+ulit This option, corresponding to the italicULMode resource, enables the display of characters with
underline attribute as italics rather than with underlining.
-ut This option indicates that xterm should not write a record into the the system utmp log file.
+ut This option indicates that xterm should write a record into the system utmp log file.
-vb This option indicates that a visual bell is preferred over an audible one. Instead of ringing
the terminal bell whenever a Control-G is received, the window will be flashed.
+vb This option indicates that a visual bell should not be used.
-wc This option sets the wideChars resource. When wideChars is set, xterm maintains internal
structures for 16-bit characters. If you do not set this resource to “true”, xterm will ignore
the escape sequence which turns UTF-8 mode on and off. The default is “false”.
+wc This option resets the wideChars resource.
-wf This option indicates that xterm should wait for the window to be mapped the first time before
starting the subprocess so that the initial terminal size settings and environment variables are
correct. It is the application's responsibility to catch subsequent terminal size changes.
+wf This option indicates that xterm should not wait before starting the subprocess.
-ziconbeep percent
Same as zIconBeep resource. If percent is non-zero, xterms that produce output while iconified
will cause an XBell sound at the given volume and have “***” prepended to their icon titles.
Most window managers will detect this change immediately, showing you which window has the
output. (A similar feature was in x10 xterm.)
-C This option indicates that this window should receive console output. This is not supported on
all systems. To obtain console output, you must be the owner of the console device, and you must
have read and write permission for it. If you are running X under xdm on the console screen you
may need to have the session startup and reset programs explicitly change the ownership of the
console device in order to get this option to work.
-Sccn This option allows xterm to be used as an input and output channel for an existing program and is
sometimes used in specialized applications. The option value specifies the last few letters of
the name of a pseudo-terminal to use in slave mode, plus the number of the inherited file
descriptor. If the option contains a “/” character, that delimits the characters used for the
pseudo-terminal name from the file descriptor. Otherwise, exactly two characters are used from
the option for the pseudo-terminal name, the remainder is the file descriptor. Examples (the
first two are equivalent since the descriptor follows the last “/”):
-S/dev/pts/123/45
-S123/45
-Sab34
Note that xterm does not close any file descriptor which it did not open for its own use. It is
possible (though probably not portable) to have an application which passes an open file
descriptor down to xterm past the initialization or the -S option to a process running in the
xterm.
OLD OPTIONS
The following command line arguments are provided for compatibility with older versions. They may not be
supported in the next release as the X Toolkit provides standard options that accomplish the same task.
%geom This option specifies the preferred size and position of the Tektronix window. It is shorthand
for specifying the “*tekGeometry” resource.
#geom This option specifies the preferred position of the icon window. It is shorthand for specifying
the “*iconGeometry” resource.
-T string
This option specifies the title for xterm's windows. It is equivalent to -title.
-n string
This option specifies the icon name for xterm's windows. It is shorthand for specifying the
“*iconName” resource. Note that this is not the same as the toolkit option -name (see below).
The default icon name is the application name.
If no suitable icon is found, xterm provides a compiled-in pixmap.
-r This option indicates that reverse video should be simulated by swapping the foreground and
background colors. It is equivalent to -rv.
-w number
This option specifies the width in pixels of the border surrounding the window. It is equivalent
to -borderwidth or -bw.
X TOOLKIT OPTIONS
The following standard X Toolkit command line arguments are commonly used with xterm:
-bd color
This option specifies the color to use for the border of the window. The corresponding resource
name is borderColor. xterm uses the X Toolkit default, which is “XtDefaultForeground”.
-bg color
This option specifies the color to use for the background of the window. The corresponding
resource name is background. The default is “XtDefaultBackground”.
-bw number
This option specifies the width in pixels of the border surrounding the window.
This appears to be a legacy of older X releases. It sets the borderWidth resource of the shell
widget, and may provide advice to your window manager to set the thickness of the window frame.
Most window managers do not use this information. See the -b option, which controls the inner
border of the xterm window.
-display display
This option specifies the X server to contact; see X(7).
-fg color
This option specifies the color to use for displaying text. The corresponding resource name is
foreground. The default is “XtDefaultForeground”.
-fn font
This option specifies the font to be used for displaying normal text. The corresponding resource
name is font. The resource value default is fixed.
-font font
This is the same as -fn.
-geometry geometry
This option specifies the preferred size and position of the VT102 window; see X(7).
-iconic This option indicates that xterm should ask the window manager to start it as an icon rather than
as the normal window. The corresponding resource name is iconic.
-name name
This option specifies the application name under which resources are to be obtained, rather than
the default executable file name. Name should not contain “.” or “*” characters.
-rv This option indicates that reverse video should be simulated by swapping the foreground and
background colors. The corresponding resource name is reverseVideo.
+rv Disable the simulation of reverse video by swapping foreground and background colors.
-title string
This option specifies the window title string, which may be displayed by window managers if the
user so chooses. The default title is the command line specified after the -e option, if any,
otherwise the application name.
-xrm resourcestring
This option specifies a resource string to be used. This is especially useful for setting
resources that do not have separate command line options.
RESOURCES
The program understands all of the core X Toolkit resource names and classes. Application specific
resources (e.g., “XTerm.NAME”) follow:
backarrowKeyIsErase (class BackarrowKeyIsErase)
Tie the VTxxx backarrowKey and ptyInitialErase resources together by setting the DECBKM state
according to whether the initial value of stty erase is a backspace (8) or delete (127)
character. A “false” value disables this feature. The default is “True”.
fullscreen (class Fullscreen)
Specifies whether or not xterm should ask the window manager to use a fullscreen layout on
startup. Xterm accepts either a keyword (ignoring case) or the number shown in parentheses:
false (0)
Fullscreen layout is not used initially, but may be later via menu-selection or control
sequence.
true (1)
Fullscreen layout is used initially, but may be disabled later via menu-selection or control
sequence.
always (2)
Fullscreen layout is used initially, and cannot be disabled later via menu-selection or
control sequence.
never (3)
Fullscreen layout is not used, and cannot be enabled later via menu-selection or control
sequence.
The default is “false”.
hold (class Hold)
If true, xterm will not immediately destroy its window when the shell command completes. It will
wait until you use the window manager to destroy/kill the window, or if you use the menu entries
that send a signal, e.g., HUP or KILL. You may scroll back, select text, etc., to perform most
graphical operations. Resizing the display will lose data, however, since this involves
interaction with the shell which is no longer running.
hpFunctionKeys (class HpFunctionKeys)
Specifies whether or not HP Function Key escape codes should be generated for function keys
instead of standard escape sequences.
See also the keyboardType resource.
iconGeometry (class IconGeometry)
Specifies the preferred size and position of the application when iconified. It is not
necessarily obeyed by all window managers.
iconHint (class IconHint)
Specifies a icon which will be added to the window manager hints. xterm provides no default
value.
Set this resource to “none” to omit the hint entirely, using whatever the window manager may
decide.
If the iconHint resource is given (or is set via the -n option) xterm searches for a pixmap file
with that name, in the current directory as well as in /usr/share/pixmaps. if the resource does
not specify an absolute pathname. In each case, xterm adds “_48x48” and/or “.xpm” to the
filename after trying without those suffixes. If it is able to load the file, xterm sets the
window manager hint for the icon-pixmap. These pixmaps are distributed with xterm, and can
optionally be compiled-in:
• mini.xterm_16x16, mini.xterm_32x32, mini.xterm_48x48
• filled-xterm_16x16 filled-xterm_32x32 filled-xterm_48x48
• xterm_16x16 xterm_32x32 xterm_48x48
• xterm-color_16x16 xterm-color_32x32 xterm-color_48x48
In either case, xterm allows for adding a “_48x48” to specify the largest of the pixmaps as a
default. That is, “mini.xterm” is the same as “mini.xterm_48x48”.
If no explicit iconHint resource is given (or if none of the compiled-in names matches), xterm
uses “mini.xterm” (which is always compiled-in).
The iconHint resource has no effect on “desktop” files, including “panel” and “menu”. Those are
typically set via a “.desktop” file; xterm provides samples for itself (and the uxterm script).
The more capable desktop systems allow changing the icon on a per-user basis.
iconName (class IconName)
Specifies a label for xterm when iconified. xterm provides no default value; some window
managers may assume the application name, e.g., “xterm”.
Setting the iconName resource sets the icon label unless overridden by zIconBeep or the control
sequences which change the window and icon labels.
keyboardType (class KeyboardType)
Enables one (or none) of the various keyboard-type resources: hpFunctionKeys, scoFunctionKeys,
sunFunctionKeys, tcapFunctionKeys and sunKeyboard. The resource's value should be one of the
corresponding strings “hp”, “sco”, “sun”, “tcap” or “vt220”. The individual resources are
provided for legacy support; this resource is simpler to use.
The default is “unknown”, i.e., none of the associated resources are set via this resource.
maxBufSize (class MaxBufSize)
Specify the maximum size of the input buffer. The default is “32768”. You cannot set this to a
value less than the minBufSize resource. It will be increased as needed to make that value
evenly divide this one.
On some systems you may want to increase one or both of the maxBufSize and minBufSize resource
values to achieve better performance if the operating system prefers larger buffer sizes.
maximized (class Maximized)
Specifies whether or not xterm should ask the window manager to maximize its layout on startup.
The default is “false”.
messages (class Messages)
Specifies whether write access to the terminal is allowed initially. See mesg(1). The default
is “true”.
menuLocale (class MenuLocale)
Specify the locale used for character-set computations when loading the popup menus. Use this to
improve initialization performance of the Athena popup menus, which may load unnecessary (and
very large) fonts, e.g., in a locale having UTF-8 encoding. The default is “C” (POSIX).
To use the current locale (only useful if you have localized the resource settings for the menu
entries), set the resource to an empty string.
minBufSize (class MinBufSize)
Specify the minimum size of the input buffer, i.e., the amount of data that xterm requests on
each read. The default is “4096”. You cannot set this to a value less than 64.
omitTranslation (class OmitTranslation)
Selectively omit one or more parts of xterm's default translations at startup. The resource
value is a comma-separated list of keywords, which may be abbreviated: “fullscreen”, “scroll-
lock”, “shift-fonts” or “wheel-mouse”. Xterm also recognizes “default”, but omitting that will
make the program unusable unless you provide a similar definition in your resource settings.
ptyHandshake (class PtyHandshake)
If “true”, xterm will perform handshaking during initialization to ensure that the parent and
child processes update the utmp and stty state.
See also waitForMap which waits for the pseudo-terminal's notion of the screen size, and
ptySttySize which resets the screen size after other terminal initialization is complete. The
default is “true”.
ptyInitialErase (class PtyInitialErase)
If “true”, xterm will use the pseudo-terminal's sense of the stty erase value. If “false”, xterm
will set the stty erase value to match its own configuration, using the kb string from the
termcap entry as a reference, if available. In either case, the result is applied to the TERMCAP
variable which xterm sets.
See also the ttyModes resource, which may modify this. The default is “false”.
ptySttySize (class PtySttySize)
If “true”, xterm will reset the screen size after terminal initialization is complete. This is
needed for some systems whose pseudo-terminals cannot propagate terminal characteristics. Where
it is not needed, it can interfere with other methods for setting the intial screen size, e.g.,
via window manager interaction.
See also waitForMap which waits for a handshake-message giving the pseudo-terminal's notion of
the screen size. The default is “false” on Linux and OS X systems, “true” otherwise.
sameName (class SameName)
If the value of this resource is “true”, xterm does not send title and icon name change requests
when the request would have no effect: the name is not changed. This has the advantage of
preventing flicker and the disadvantage of requiring an extra round trip to the server to find
out the previous value. In practice this should never be a problem. The default is “true”.
scaleHeight (class ScaleHeight)
Scale line-height values by the resource value, which is limited to “0.9” to “1.5”. The default
value is “1.0”,
While this resource applies to either bitmap or TrueType fonts, its main purpose is to help work
around incompatible changes in the Xft library's font metrics. Xterm checks the font metrics to
find what the library claims are the bounding boxes for each glyph (character). However, some of
Xft's features (such as the autohinter) can cause the glyphs to be scaled larger than the
bounding boxes, and be partly overwritten by the next row.
See useClipping for a related resource.
scoFunctionKeys (class ScoFunctionKeys)
Specifies whether or not SCO Function Key escape codes should be generated for function keys
instead of standard escape sequences.
See also the keyboardType resource.
sessionMgt (class SessionMgt)
If the value of this resource is “true”, xterm sets up session manager callbacks for
XtNdieCallback and XtNsaveCallback. The default is “true”.
sunFunctionKeys (class SunFunctionKeys)
Specifies whether or not Sun Function Key escape codes should be generated for function keys
instead of standard escape sequences.
See also the keyboardType resource.
sunKeyboard (class SunKeyboard)
Specifies whether or not Sun/PC keyboard layout should be assumed rather than DEC VT220. This
causes the keypad “+' to be mapped to “,'. and CTRL F1-F12 to F11-F20, depending on the setting
of the ctrlFKeys resource. so xterm emulates a DEC VT220 more accurately. Otherwise (the
default, with sunKeyboard set to “false”), xterm uses PC-style bindings for the function keys and
keypad.
PC-style bindings use the Shift, Alt, Control and Meta keys as modifiers for function-keys and
keypad (see the document Xterm Control Sequences for details). The PC-style bindings are
analogous to PCTerm, but not the same thing. Normally these bindings do not conflict with the
use of the Meta key as described for the eightBitInput resource. If they do, note that the PC-
style bindings are evaluated first.
See also the keyboardType resource.
tcapFunctionKeys (class TcapFunctionKeys)
Specifies whether or not function key escape codes read from the termcap/terminfo entry should be
generated for function keys instead of standard escape sequences. The default is “false”, i.e.,
this feature is disabled.
See also the keyboardType resource.
termName (class TermName)
Specifies the terminal type name to be set in the TERM environment variable.
title (class Title)
Specifies a string that may be used by the window manager when displaying this application.
toolBar (class ToolBar)
Specifies whether or not the toolbar should be displayed. The default is “true”.
ttyModes (class TtyModes)
Specifies a string containing terminal setting keywords and the characters to which they may be
bound. Allowable keywords include: brk, dsusp, eof, eol, eol2, erase, erase2, flush, intr, kill,
lnext, quit, rprnt, start, status, stop, susp, swtch and weras. Control characters may be
specified as ^char (e.g., ^c or ^u) and ^? may be used to indicate delete (127). Use ^- to
denote undef. Use \034 to represent ^\, since a literal backslash in an X resource escapes the
next character.
This is very useful for overriding the default terminal settings without having to do an stty
every time an xterm is started. Note, however, that the stty program on a given host may use
different keywords; xterm's table is built-in.
If the ttyModes resource specifies a value for erase, that overrides the ptyInitialErase resource
setting, i.e., xterm initializes the terminal to match that value.
useInsertMode (class UseInsertMode)
Force use of insert mode by adding appropriate entries to the TERMCAP environment variable. This
is useful if the system termcap is broken. The default is “false”.
utmpDisplayId (class UtmpDisplayId)
Specifies whether or not xterm should try to record the display identifier (display number and
screen number) as well as the hostname in the system utmp log file. The default is “true”.
utmpInhibit (class UtmpInhibit)
Specifies whether or not xterm should try to record the user's terminal in the system utmp log
file. If true, xterm will not try. The default is “false”.
waitForMap (class WaitForMap)
Specifies whether or not xterm should wait for the initial window map before starting the
subprocess. This is part of the ptyHandshake logic. When xterm is directed to wait in this
fashion, it passes the terminal size from the display end of the pseudo-terminal to the terminal
I/O connection, e.g., according to the window manager. Otherwise, it uses the size as given in
resource values or command-line option -geom. The default is “false”.
zIconBeep (class ZIconBeep)
Same as -ziconbeep command line argument. If the value of this resource is non-zero, xterms that
produce output while iconified will cause an XBell sound at the given volume and have “*** ”
prepended to their icon titles. Most window managers will detect this change immediately,
showing you which window has the output. (A similar feature was in x10 xterm.) The default is
“false”.
zIconTitleFormat (class ZIconTitleFormat)
Allow customization of the string used in the zIconBeep feature. The default value is “*** %s”.
If the resource value contains a “%s”, then xterm inserts the icon title at that point rather
than prepending the string to the icon title. (Only the first “%s” is used).
VT100 Widget Resources
The following resources are specified as part of the vt100 widget (class VT100). They are specified by
patterns such as “XTerm.vt100.NAME”.
If your xterm is configured to support the “toolbar”, then those patterns need an extra level for the
form-widget which holds the toolbar and vt100 widget. A wildcard between the top-level “XTerm” and the
“vt100” widget makes the resource settings work for either, e.g., “XTerm*vt100.NAME”.
activeIcon (class ActiveIcon)
Specifies whether or not active icon windows are to be used when the xterm window is iconified,
if this feature is compiled into xterm. The active icon is a miniature representation of the
content of the window and will update as the content changes. Not all window managers
necessarily support application icon windows. Some window managers will allow you to enter
keystrokes into the active icon window. The default is “default”.
Xterm accepts either a keyword (ignoring case) or the number shown in parentheses:
false (0)
No active icon is shown.
true (1)
The active icon is shown. If you are using twm, use this setting to enable active-icons.
default (2)
xterm checks at startup, and shows an active icon only for window managers which it can
identify and which are known to support the feature. These are fvwm (full support), and
window maker (limited). A few other windows managers (such as twm and ctwm) support
active icons, but do not support the extensions which allow xterm to identify the window
manager.
allowBoldFonts (class AllowBoldFonts)
When set to “false”, xterm will not use bold fonts. This overrides both the alwaysBoldMode and
the boldMode resources. alwaysBoldMode (class AlwaysBoldMode)
allowC1Printable (class AllowC1Printable)
If true, overrides the mapping of C1 controls (codes 128-159) to make them be treated as if they
were printable characters. Although this corresponds to no particular standard, some users
insist it is a VT100. The default is “false”.
allowColorOps (class AllowColorOps)
Specifies whether control sequences that set/query the dynamic colors should be allowed. ANSI
colors are unaffected by this resource setting. The default is “true”.
allowFontOps (class AllowFontOps)
Specifies whether control sequences that set/query the font should be allowed. The default is
“false”.
allowPasteControls (class AllowPasteControls)
If true, allow control characters such as BEL and CAN to be pasted. Formatting characters (tab,
newline) are always allowed. Other C0 control characters are suppressed unless this resource is
enabled. The exact set of control characters (C0 and C1) depends upon whether UTF-8 encoding is
used, as well as the allowC1Printable resource. The default is “false”.
allowScrollLock (class AllowScrollLock)
Specifies whether control sequences that set/query the Scroll Lock key should be allowed, as well
as whether the Scroll Lock key responds to user's keypress. The default is “false”.
When this feature is enabled, xterm will sense the state of the Scroll Lock key each time it
acquires focus. Pressing the Scroll Lock key toggles xterm's internal state, as well as toggling
the associated LED. While the Scroll Lock is active, xterm attempts to keep a viewport on the
same set of lines. If the current viewport is scrolled past the limit set by the saveLines
resource, then Scroll Lock has no further effect.
The reason for setting the default to “false” is to avoid user surprise. This key is generally
unused in keyboard configurations, and has not acquired a standard meaning even when it is used
in that manner. Consequently, users have assigned it for ad hoc purposes.
allowSendEvents (class AllowSendEvents)
Specifies whether or not synthetic key and button events (generated using the X protocol
SendEvent request) should be interpreted or discarded. The default is “false” meaning they are
discarded. Note that allowing such events would create a very large security hole, therefore
enabling this resource forcefully disables the allowXXXOps resources. The default is “false”.
allowTcapOps (class AllowTcapOps)
Specifies whether control sequences that query the terminal's notion of its function-key strings,
as termcap or terminfo capabilities should be allowed. The default is “true”.
A few programs, e.g., vim, use this feature to get an accurate description of the terminal's
capabilities, independent of the termcap/terminfo setting:
• xterm can tell the querying program how many colors it supports. This is a constant,
depending on how it is compiled, typically 16. It does not change if you alter resource
settings, e.g., the boldColors resource.
• xterm can tell the querying program what strings are sent by modified (shift-, control-,
alt-) function- and keypad-keys. Reporting control- and alt-modifiers is a feature that
relies on the ncurses extended naming.
allowTitleOps (class AllowTitleOps)
Specifies whether control sequences that modify the window title or icon name should be allowed.
The default is “true”.
allowWindowOps (class AllowWindowOps)
Specifies whether extended window control sequences (as used in dtterm) should be allowed. These
include several control sequences which manipulate the window size or position, as well as
reporting these values and the title or icon name. Each of these can be abused in a script;
curiously enough most terminal emulators that implement these restrict only a small part of the
repertoire. For fine-tuning, see disallowedWindowOps. The default is “false”.
altIsNotMeta (class AltIsNotMeta)
If “true”, treat the Alt-key as if it were the Meta-key. Your keyboard may happen to be
configured so they are the same. But if they are not, this allows you to use the same prefix-
and shifting operations with the Alt-key as with the Meta-key. See altSendsEscape and
metaSendsEscape. The default is “false”.
altSendsEscape (class AltSendsEscape)
This is an additional keyboard operation that may be processed after the logic for
metaSendsEscape. It is only available if the altIsNotMeta resource is set.
• If “true”, Alt characters (a character combined with the modifier associated with left/right
Alt-keys) are converted into a two-character sequence with the character itself preceded by
ESC. This applies as well to function key control sequences, unless xterm sees that Alt is
used in your key translations.
• If “false”, Alt characters input from the keyboard cause a shift to 8-bit characters (just
like metaSendsEscape). By combining the Alt- and Meta-modifiers, you can create
corresponding combinations of ESC-prefix and 8-bit characters.
The default is “False”. Xterm provides a menu option for toggling this resource.
alternateScroll (class ScrollCond)
If “true”, the scroll-back and scroll-forw actions send cursor-up and -down keys when xterm is
displaying the alternate screen. The default is “false”.
The alternateScroll state can also be set using a control sequence.
alwaysBoldMode (class AlwaysBoldMode)
Specifies whether xterm should check if the normal and bold fonts are distinct before deciding
whether to use overstriking to simulate bold fonts. If this resource is true, xterm does not
make the check for distinct fonts when deciding how to handle the boldMode resource. The default
is “false”.
boldMode alwaysBoldMode Comparison Action
────────────────────────────────────────────────────
false false ignored use font
false true ignored use font
true false same overstrike
true false different use font
true true ignored overstrike
This resource is used only for bitmap fonts:
• When using bitmap fonts, it is possible that the font server will approximate the bold font
by rescaling it from a different font size than expected. The alwaysBoldMode resource allows
the user to override the (sometimes poor) resulting bold font with overstriking (which is at
least consistent).
• The problem does not occur with TrueType fonts (though there can be other unnecessary issues
such as different coverage of the normal and bold fonts).
As an alternative, setting the allowBoldFonts resource to false overrides both the alwaysBoldMode
and the boldMode resources.
alwaysHighlight (class AlwaysHighlight)
Specifies whether or not xterm should always display a highlighted text cursor. By default (if
this resource is false), a hollow text cursor is displayed whenever the pointer moves out of the
window or the window loses the input focus. The default is “false”.
alwaysUseMods (class AlwaysUseMods)
Override the numLock resource, telling xterm to use the Alt and Meta modifiers to construct
parameters for function key sequences even if those modifiers appear in the translations
resource. Normally xterm checks if Alt or Meta is used in a translation that would conflict with
function key modifiers, and will ignore these modifiers in that special case. The default is
“false”.
answerbackString (class AnswerbackString)
Specifies the string that xterm sends in response to an ENQ (control/E) character from the host.
The default is a blank string, i.e., “”. A hardware VT100 implements this feature as a setup
option.
appcursorDefault (class AppcursorDefault)
If “true”, the cursor keys are initially in application mode. This is the same as the VT102
private DECCKM mode, The default is “false”.
appkeypadDefault (class AppkeypadDefault)
If “true”, the keypad keys are initially in application mode. The default is “false”.
assumeAllChars (class AssumeAllChars)
If “true”, this enables a special case in bitmap fonts to allow the font server to choose how to
display missing glyphs. The default is “false”.
autoWrap (class AutoWrap)
Specifies whether or not auto-wraparound should be enabled. This is the same as the VT102
DECAWM. The default is “true”.
awaitInput (class AwaitInput)
Specifies whether or not the xterm uses a 50 millisecond timeout to await input (i.e., to support
the Xaw3d arrow scrollbar). The default is “false”.
backarrowKey (class BackarrowKey)
Specifies whether the backarrow key transmits a backspace (8) or delete (127) character. This
corresponds to the DECBKM control sequence. A “true” value specifies backspace. The default is
“True”. Pressing the control key toggles this behavior.
background (class Background)
Specifies the color to use for the background of the window. The default is
“XtDefaultBackground”.
bellIsUrgent (class BellIsUrgent)
Specifies whether to set the Urgency hint for the window manager when making a bell sound. The
default is “false”.
bellOnReset (class BellOnReset)
Specifies whether to sound a bell when doing a hard reset. The default is “true”.
bellSuppressTime (class BellSuppressTime)
Number of milliseconds after a bell command is sent during which additional bells will be
suppressed. Default is 200. If set non-zero, additional bells will also be suppressed until the
server reports that processing of the first bell has been completed; this feature is most useful
with the visible bell.
boldColors (class ColorMode)
Specifies whether to combine bold attribute with colors like the IBM PC, i.e., map colors 0
through 7 to colors 8 through 15. These normally are the brighter versions of the first 8
colors, hence bold. The default is “true”.
boldFont (class BoldFont)
Specifies the name of the bold font to use instead of overstriking. There is no default for this
resource.
This font must be the same height and width as the normal font, otherwise it is ignored. If only
one of the normal or bold fonts is specified, it will be used as the normal font and the bold
font will be produced by overstriking this font.
See also the discussion of boldMode and alwaysBoldMode resources.
boldMode (class BoldMode)
This specifies whether or not text with the bold attribute should be overstruck to simulate bold
fonts if the resolved bold font is the same as the normal font. It may be desirable to disable
bold fonts when color is being used for the bold attribute.
Note that xterm has one bold font which you may set explicitly. Xterm attempts to derive a bold
font for the other font selections (font1 through font6). If it cannot find a bold font, it will
use the normal font. In each case (whether the explicit resource or the derived font), if the
normal and bold fonts are distinct, this resource has no effect. The default is “true”.
See the alwaysBoldMode resource which can modify the behavior of this resource.
Although xterm attempts to derive a bold font for other font selections, the font server may not
cooperate. Since X11R6, bitmap fonts have been scaled. The font server claims to provide the
bold font that xterm requests, but the result is not always readable. XFree86 introduced a
feature which can be used to suppress the scaling. In the X server's configuration file (e.g.,
“/etc/X11/XFree86”), you can add “:unscaled” to the end of the directory specification for the
“misc” fonts, which comprise the fixed-pitch fonts that are used by xterm. For example
FontPath "/usr/lib/X11/fonts/misc/"
would become
FontPath "/usr/lib/X11/fonts/misc/:unscaled"
Depending on your configuration, the font server may have its own configuration file. The same
“:unscaled” can be added to its configuration file at the end of the directory specification for
“misc”.
The bitmap scaling feature is also used by xterm to implement VT102 double-width and double-
height characters.
brokenLinuxOSC (class BrokenLinuxOSC)
If true, xterm applies a workaround to ignore malformed control sequences that a Linux script
might send. Compare the palette control sequences documented in console_codes with ECMA-48. The
default is “true”.
brokenSelections (class BrokenSelections)
If true, xterm in 8-bit mode will interpret STRING selections as carrying text in the current
locale's encoding. Normally STRING selections carry ISO-8859-1 encoded text. Setting this
resource to “true” violates the ICCCM; it may, however, be useful for interacting with some
broken X clients. The default is “false”.
brokenStringTerm (class BrokenStringTerm)
provides a work-around for some ISDN routers which start an application control string without
completing it. Set this to “true” if xterm appears to freeze when connecting. The default is
“false”.
Xterm's state parser recognizes several types of control strings which can contain text, e.g.,
APC (Application Program Command),
DCS (Device Control String),
OSC (Operating System Command),
PM (Privacy Message), and
SOS (Start of String),
Each should end with a string-terminator (a special character which cannot appear in these
strings). Ordinary control characters found within the string are not ignored; they are
processed without interfering with the process of accumulating the control string's content.
Xterm recognizes these controls in all modes, although some of the functions may be suppressed
after parsing the control.
When enabled, this feature allows the user to exit from an unterminated control string when any
of these ordinary control characters are found:
control/D (used as an end of file in many shells),
control/H (backspace),
control/I (tab-feed),
control/J (line feed aka newline),
control/K (vertical tab),
control/L (form feed),
control/M (carriage return),
control/N (shift-out),
control/O (shift-in),
control/Q (XOFF),
control/X (cancel)
c132 (class C132)
Specifies whether or not the VT102 DECCOLM escape sequence, used to switch between 80 and 132
columns, should be honored. The default is “false”.
cacheDoublesize (class CacheDoublesize)
Tells whether to cache double-sized fonts by xterm. Set this to zero to disable double-sized
fonts altogether.
cdXtraScroll (class CdXtraScroll)
Specifies whether xterm should scroll to a new page when clearing the whole screen. Like
tiXtraScroll, the intent of this option is to provide a picture of the full-screen application's
display on the scrollback before wiping out the text. The default for this resource is “false”.
charClass (class CharClass)
Specifies comma-separated lists of character class bindings of the form [low-]high:value. These
are used in determining which sets of characters should be treated the same when doing cut and
paste. See the CHARACTER CLASSES section.
cjkWidth (class CjkWidth)
Specifies whether xterm should follow the traditional East Asian width convention. When turned
on, characters with East Asian Ambiguous (A) category in UTR 11 have a column width of 2. You
may have to set this option to “true” if you have some old East Asian terminal based programs
that assume that line-drawing characters have a column width of 2. If this resource is false,
the mkWidth resource controls the choice between the system's wcwidth and xterm's built-in
tables. The default is “false”.
color0 (class Color0)
color1 (class Color1)
color2 (class Color2)
color3 (class Color3)
color4 (class Color4)
color5 (class Color5)
color6 (class Color6)
color7 (class Color7)
These specify the colors for the ISO-6429 extension. The defaults are, respectively, black,
red3, green3, yellow3, a customizable dark blue, magenta3, cyan3, and gray90. The default shades
of color are chosen to allow the colors 8-15 to be used as brighter versions.
color8 (class Color8)
color9 (class Color9)
color10 (class Color10)
color11 (class Color11)
color12 (class Color12)
color13 (class Color13)
color14 (class Color14)
color15 (class Color15)
These specify the colors for the ISO-6429 extension if the bold attribute is also enabled. The
default resource values are respectively, gray30, red, green, yellow, a customizable light blue,
magenta, cyan, and white.
color16 (class Color16)
through
color255 (class Color255)
These specify the colors for the 256-color extension. The default resource values are for colors
16 through 231 to make a 6x6x6 color cube, and colors 232 through 255 to make a grayscale ramp.
Resources past color15 are available as a compile-time option. Due to a hardcoded limit in the X
libraries on the total number of resources (to 400), the resources for 256-colors are omitted
when wide-character support and luit are enabled. Besides inconsistent behavior if only part of
the resources were allowed, determining the exact cutoff is difficult, and the X libraries tend
to crash if the number of resources exceeds the limit. The color palette is still initialized to
the same default values, and can be modified via control sequences.
On the other hand, the resource limit does permit including the entire range for 88-colors.
colorAttrMode (class ColorAttrMode)
Specifies whether colorBD, colorBL, colorRV, and colorUL should override ANSI colors. If not,
these are displayed only when no ANSI colors have been set for the corresponding position. The
default is “false”.
colorBD (class ColorBD)
This specifies the color to use to display bold characters if the “colorBDMode” resource is
enabled. The default is “XtDefaultForeground”.
See also the veryBoldColors resource which allows combining bold and color.
colorBDMode (class ColorAttrMode)
Specifies whether characters with the bold attribute should be displayed in color or as bold
characters. Note that setting colorMode off disables all colors, including bold. The default is
“false”.
colorBL (class ColorBL)
This specifies the color to use to display blink characters if the “colorBLMode” resource is
enabled. The default is “XtDefaultForeground”.
See also the veryBoldColors resource which allows combining underline and color.
colorBLMode (class ColorAttrMode)
Specifies whether characters with the blink attribute should be displayed in color. Note that
setting colorMode off disables all colors, including this. The default is “false”.
colorMode (class ColorMode)
Specifies whether or not recognition of ANSI (ISO-6429) color change escape sequences should be
enabled. The default is “true”.
colorRV (class ColorRV)
This specifies the color to use to display reverse characters if the “colorRVMode” resource is
enabled. The default is “XtDefaultForeground”.
See also the veryBoldColors resource which allows combining reverse and color.
colorRVMode (class ColorAttrMode)
Specifies whether characters with the reverse attribute should be displayed in color. Note that
setting colorMode off disables all colors, including this. The default is “false”.
colorUL (class ColorUL)
This specifies the color to use to display underlined characters if the “colorULMode” resource is
enabled. The default is “XtDefaultForeground”.
See also the veryBoldColors resource which allows combining underline and color.
colorULMode (class ColorAttrMode)
Specifies whether characters with the underline attribute should be displayed in color or as
underlined characters. Note that setting colorMode off disables all colors, including
underlining. The default is “false”.
combiningChars (class CombiningChars)
Specifies the number of wide-characters which can be stored in a cell to overstrike (combine)
with the base character of the cell. This can be set to values in the range 0 to 4. The default
is “2”.
ctrlFKeys (class CtrlFKeys)
In VT220 keyboard mode (see sunKeyboard resource), specifies the amount by which to shift F1-F12
given a control modifier (CTRL). This allows you to generate key symbols for F10-F20 on a Sun/PC
keyboard. The default is “10”, which means that CTRL F1 generates the key symbol for F11.
curses (class Curses)
Specifies whether or not the last column bug in more(1) should be worked around. See the -cu
option for details. The default is “false”.
cursorBlink (class CursorBlink)
Specifies whether to make the cursor blink. The default is “false”.
Xterm uses two variables to determine whether the cursor blinks. One is set by this resource.
The other is set by control sequences (private mode 12 and DECSCUSR). Xterm tests the XOR of the
two variables.
cursorColor (class CursorColor)
Specifies the color to use for the text cursor. The default is “XtDefaultForeground”. By
default, xterm attempts to keep this color from being the same as the background color, since it
draws the cursor by filling the background of a text cell. The same restriction applies to
control sequences which may change this color.
Setting this resource overrides most of xterm's adjustments to cursor color. It will still use
reverse-video to disallow some cases, such as a black cursor on a black background.
cursorOffTime (class CursorOffTime)
Specifies the duration of the “off” part of the cursor blink cycle-time in milliseconds. The
same timer is used for text blinking. The default is “300”.
cursorOnTime (class CursorOnTime)
Specifies the duration of the “on” part of the cursor blink cycle-time, in milliseconds. The
same timer is used for text blinking. The default is “600”.
cutNewline (class CutNewline)
If “false”, triple clicking to select a line does not include the Newline at the end of the line.
If “true”, the Newline is selected. The default is “true”.
cursorUnderLine (class CursorUnderLine)
Specifies whether to make the cursor underlined or a box. The default is “false”.
cutToBeginningOfLine (class CutToBeginningOfLine)
If “false”, triple clicking to select a line selects only from the current word forward. If
“true”, the entire line is selected. The default is “true”.
decTerminalID (class DecTerminalID)
Specifies the emulation level (100=VT100, 220=VT220, etc.), used to determine the type of
response to a DA control sequence. Leading non-digit characters are ignored, e.g., “vt100” and
“100” are the same. The default is “420”.
defaultString (class DefaultString)
Specify the character (or string) which xterm will substitute when pasted text includes a
character which cannot be represented in the current encoding. For instance, pasting UTF-8 text
into a display of ISO-8859-1 characters will only be able to display codes 0-255, while UTF-8
text can include Unicode values above 255. The default is “#” (a single pound sign).
If the undisplayable text would be double-width, xterm will add a space after the “#” character,
to give roughly the same layout on the screen as the original text.
deleteIsDEL (class DeleteIsDEL)
Specifies whether the Delete key on the editing keypad should send DEL (127) or the VT220-style
Remove escape sequence. A “false” value enables the latter. The default is “Maybe”.
disallowedColorOps (class DisallowedColorOps)
Specify which features will be disabled if allowColorOps is false. This is a comma-separated
list of names. The default value is
SetColor,GetColor,GetAnsiColor
The names are listed below. xterm ignores capitalization, but they are shown in mixed-case for
clarity.
SetColor
Set a specific dynamic color.
GetColor
Report the current setting of a given dynamic color.
GetAnsiColor
Report the current setting of a given ANSI color (actually any of the colors set via ANSI-
style controls).
disallowedFontOps (class DisallowedFontOps)
Specify which features will be disabled if allowFontOps is false. This is a comma-separated list
of names. The default value is
SetFont,GetFont
The names are listed below. xterm ignores capitalization, but they are shown in mixed-case for
clarity.
SetFont
Set the specified font.
GetFont
Report the specified font.
disallowedTcapOps (class DisallowedTcapOps)
Specify which features will be disabled if allowTcapOps is false. This is a comma-separated list
of names. The default value is
SetTcap,GetTcap
The names are listed below. xterm ignores capitalization, but they are shown in mixed-case for
clarity.
SetTcap
(not implemented)
GetTcap
Report specified function- and other special keys.
disallowedWindowOps (class DisallowedWindowOps)
Specify which features will be disabled if allowWindowOps is false. This is a comma-separated
list of names, or (for the controls adapted from dtterm the operation number). The default value
is
1,2,3,4,5,6,7,8,9,11,13,14,18,19,20,21,GetSelection,SetSelection,SetWinLines,SetXprop
(i.e. no operations are allowed).
The names are listed below. xterm ignores capitalization, but they are shown in mixed-case for
clarity. Where a number can be used as an alternative, it is given in parentheses after the
name.
GetIconTitle (20)
Report xterm window's icon label as a string.
GetScreenSizeChars (19)
Report the size of the screen in characters as numbers.
GetSelection
Report selection data as a base64 string.
GetWinPosition (13)
Report xterm window position as numbers.
GetWinSizeChars (18)
Report the size of the text area in characters as numbers.
GetWinSizePixels (14)
Report xterm window in pixels as numbers.
GetWinState (11)
Report xterm window state as a number.
GetWinTitle (21)
Report xterm window's title as a string.
LowerWin (6)
Lower the xterm window to the bottom of the stacking order.
MaximizeWin (9)
Maximize window (i.e., resize to screen size).
FullscreenWin (10)
Use full screen (i.e., resize to screen size, without window decorations).
MinimizeWin (2)
Iconify window.
PopTitle (23)
Pop title from internal stack.
PushTitle (22)
Push title to internal stack.
RaiseWin (5)
Raise the xterm window to the front of the stacking order.
RefreshWin (7)
Refresh the xterm window.
RestoreWin (1)
De-iconify window.
SetSelection
Set selection data.
SetWinLines
Resize to a given number of lines, at least 24.
SetWinPosition (3)
Move window to given coordinates.
SetWinSizeChars (8)
Resize the text area to given size in characters.
SetWinSizePixels (4)
Resize the xterm window to given size in pixels.
SetXprop
Set X property on top-level window.
dynamicColors (class DynamicColors)
Specifies whether or not escape sequences to change colors assigned to different attributes are
recognized.
eightBitControl (class EightBitControl)
Specifies whether or not control sequences sent by the terminal should be eight-bit characters or
escape sequences. The default is “false”.
eightBitInput (class EightBitInput)
If “true”, Meta characters (a single-byte character combined with the Meta modifier key) input
from the keyboard are presented as a single character, modified according to the eightBitMeta
resource. If “false”, Meta characters are converted into a two-character sequence with the
character itself preceded by ESC. The default is “true”.
The metaSendsEscape and altSendsEscape resources may override this feature. Generally keyboards
do not have a key labeled “Meta”, but “Alt” keys are common, and they are conventionally used for
“Meta”. If they were synonymous, it would have been reasonable to name this resource
“altSendsEscape”, reversing its sense. For more background on this, see the meta function in
curses.
Note that the Alt key is not necessarily the same as the Meta modifier. xmodmap lists your key
modifiers. X defines modifiers for shift, (caps) lock and control, as well as 5 additional
modifiers which are generally used to configure key modifiers. xterm inspects the same
information to find the modifier associated with either Meta key (left or right), and uses that
key as the Meta modifier. It also looks for the NumLock key, to recognize the modifier which is
associated with that.
If your xmodmap configuration uses the same keycodes for Alt- and Meta-keys, xterm will only see
the Alt-key definitions, since those are tested before Meta-keys. NumLock is tested first. It
is important to keep these keys distinct; otherwise some of xterm's functionality is not
available.
The eightBitInput resource is tested at startup time. If “true”, the xterm tries to put the
terminal into 8-bit mode. If “false”, on startup, xterm tries to put the terminal into 7-bit
mode. For some configurations this is unsuccessful; failure is ignored. After startup, xterm
does not change the terminal between 8-bit and 7-bit mode.
As originally implemented in X11, the resource value did not change after startup. However
(since patch #216 in 2006) xterm can modify eightBitInput after startup via a control sequence.
The corresponding terminfo capabilities smm (set meta mode) and rmm (reset meta mode) have been
recognized by bash for some time. Interestingly enough, bash's notion of "meta mode" differs
from the standard definition (in the terminfo manual), which describes the change to the eighth
bit of a character. It happens that bash views "meta mode" as the ESC character that xterm puts
before a character when a special meta key is pressed. bash's early documentation talks about
the ESC character and ignores the eighth bit.
eightBitMeta (class EightBitMeta)
This controls the way xterm modifies the eighth bit of a single-byte key when the eightBitInput
resource is set. The default is “locale”.
The resource value is a string, evaluated as a boolean after startup.
false
The key is sent unmodified.
locale
The key is modified only if the locale uses eight-bit encoding.
true The key is sent modified.
never
The key is always sent unmodified.
Except for the never choice, xterm honors the terminfo capabilities smm (set meta mode) and rmm
(reset meta mode), allowing the feature to be turned on or off dynamically.
If eightBitMeta is enabled when the locale uses UTF-8, xterm encodes the value as UTF-8 (since
patch #183 in 2003).
eightBitOutput (class EightBitOutput)
Specifies whether or not eight-bit characters sent from the host should be accepted as is or
stripped when printed. The default is “true”, which means that they are accepted as is.
eightBitSelectTypes (class EightBitSelectTypes)
Override xterm's default selection target list (see SELECT/PASTE) for selections in normal
(ISO-8859-1) mode. The default is an empty string, i.e., “”, which does not override anything.
faceName (class FaceName)
Specify the pattern for scalable fonts selected from the FreeType library if support for that
library was compiled into xterm. There is no default value.
If not specified, or if there is no match for both normal and bold fonts, xterm uses the bitmap
font and related resources.
It is possible to select suitable bitmap fonts using a script such as this:
#!/bin/sh
FONT=`xfontsel -print`
test -n "$FONT" && xfd -fn "$FONT"
However (even though xfd accepts a “-fa” option to denote FreeType fonts), xfontsel has not been
similarly extended. As a workaround, you may try
fc-list :scalable=true:spacing=mono: family
to find a list of scalable fixed-pitch fonts which may be used for the faceName resource value.
faceNameDoublesize (class FaceNameDoublesize)
Specify a double-width scalable font for cases where an application requires this, e.g., in CJK
applications. There is no default value.
If the application uses double-wide characters and this resource is not given, xterm will use a
scaled version of the font given by faceName.
faceSize (class FaceSize)
Specify the pointsize for fonts selected from the FreeType library if support for that library
was compiled into xterm. The default is “14.0” On the VT Fonts menu, this corresponds to the
Default entry.
Although the default is “14.0”, this may not be the same as the pointsize for the default bitmap
font, i.e., that assigned with the -fn option, or the font resource. For example, the “fixed”
font usually has a pointsize of “8.0”. If you set faceSize to match the size of the bitmap font,
then switching between bitmap and TrueType fonts via the font menu will give comparable sizes for
the window.
You can specify the pointsize for TrueType fonts selected with the other size-related menu
entries such as Medium, Huge, etc., by using one of the following resource values. If you do not
specify a value, they default to “0.0”, which causes xterm to use the ratio of font sizes from
the corresponding bitmap font resources to obtain a TrueType pointsize.
If all of the faceSize resources are set, then xterm will use this information to determine the
next smaller/larger TrueType font for the larger-vt-font() and smaller-vt-font() actions. If any
are not set, xterm will use only the areas of the bitmap fonts.
faceSize1 (class FaceSize1)
Specifies the pointsize of the first alternative font.
faceSize2 (class FaceSize2)
Specifies the pointsize of the second alternative font.
faceSize3 (class FaceSize3)
Specifies the pointsize of the third alternative font.
faceSize4 (class FaceSize4)
Specifies the pointsize of the fourth alternative font.
faceSize5 (class FaceSize5)
Specifies the pointsize of the fifth alternative font.
faceSize6 (class FaceSize6)
Specifies the pointsize of the sixth alternative font.
font (class Font)
Specifies the name of the normal font. The default is “fixed”.
See the discussion of the locale resource, which describes how this font may be overridden.
NOTE: some resource files use patterns such as
*font: fixed
which are overly broad, affecting both
xterm.vt100.font
and
xterm.vt100.utf8Fonts.font
which is probably not what you intended.
fastScroll (class FastScroll)
Modifies the effect of jump scroll (jumpScroll) by suppressing screen refreshes for the special
case when output to the screen has completely shifted the contents off-screen. For instance,
cat'ing a large file to the screen does this.
font1 (class Font1)
Specifies the name of the first alternative font, corresponding to “Unreadable” in the standard
menu.
font2 (class Font2)
Specifies the name of the second alternative font, corresponding to “Tiny” in the standard menu.
font3 (class Font3)
Specifies the name of the third alternative font, corresponding to “Small” in the standard menu.
font4 (class Font4)
Specifies the name of the fourth alternative font, corresponding to “Medium” in the standard
menu.
font5 (class Font5)
Specifies the name of the fifth alternative font, corresponding to “Large” in the standard menu.
font6 (class Font6)
Specifies the name of the sixth alternative font, corresponding to “Huge” in the standard menu.
fontDoublesize (class FontDoublesize)
Specifies whether xterm should attempt to use font scaling to draw double-sized characters. Some
older font servers cannot do this properly, will return misleading font metrics. The default is
“true”. If disabled, xterm will simulate double-sized characters by drawing normal characters
with spaces between them.
fontWarnings (class FontWarnings)
Specify whether xterm should report an error if it fails to load a font:
0 Never report an error (though the X libraries may).
1 Report an error if the font name was given as a resource setting.
2 Always report an error on failure to load a font.
The default is “1”.
forceBoxChars (class ForceBoxChars)
Specifies whether xterm should assume the normal and bold fonts have VT100 line-drawing
characters:
• The fixed-pitch ISO-8859-*-encoded fonts used by xterm normally have the VT100 line-drawing
glyphs in cells 1-31. Other fixed-pitch fonts may be more attractive, but lack these glyphs.
• When using an ISO-10646-1 font and the wideChars resource is true, xterm uses the Unicode
glyphs which match the VT100 line-drawing glyphs.
If “false”, xterm checks for missing glyphs in the font and makes line-drawing characters
directly as needed. If “true”, xterm assumes the font does not contain the line-drawing
characters, and draws them directly. The default is “false”.
forcePackedFont (class ForcePackedFont)
Specifies whether xterm should use the maximum or minimum glyph width when displaying using a
bitmap font. Use the maximum width to help with proportional fonts. The default is “true”,
denoting the minimum width.
foreground (class Foreground)
Specifies the color to use for displaying text in the window. Setting the class name instead of
the instance name is an easy way to have everything that would normally appear in the text color
change color. The default is “XtDefaultForeground”.
formatOtherKeys (class FormatOtherKeys)
Overrides the format of the escape sequence used to report modified keys with the modifyOtherKeys
resource.
0 send modified keys as parameters for function-key 27 (default).
1 send modified keys as parameters for CSI u.
freeBoldBox (class FreeBoldBox)
Specifies whether xterm should assume the bounding boxes for normal and bold fonts are
compatible. If “false”, xterm compares them and will reject choices of bold fonts that do not
match the size of the normal font. The default is “false”, which means that the comparison is
performed.
geometry (class Geometry)
Specifies the preferred size and position of the VT102 window. There is no default for this
resource.
highlightColor (class HighlightColor)
Specifies the color to use for the background of selected (highlighted) text. If not specified
(i.e., matching the default foreground), reverse video is used. The default is
“XtDefaultForeground”.
highlightColorMode (class HighlightColorMode)
Specifies whether xterm should use highlightTextColor and highlightColor to override the reversed
foreground/background colors in a selection. The default is unspecified: at startup, xterm
checks if those resources are set to something other than the default foreground and background
colors. Setting this resource disables the check.
The following table shows the interaction of the highlighting resources, abbreviated as shown to
fit in this page:
HCM
highlightColorMode
HR highlightReverse
HBG
highlightColor
HFG
highlightTextColor
HCM HR HBG HFG Highlight
──────────────────────────────────────────────────────
false false default default bg/fg
false false default set bg/fg
false false set default fg/HBG
false false set set fg/HBG
──────────────────────────────────────────────────────
false true default default bg/fg
false true default set bg/fg
false true set default fg/HBG
false true set set fg/HBG
──────────────────────────────────────────────────────
true false default default bg/fg
true false default set HFG/fg
true false set default bg/HBG
true false set set HFG/HBG
──────────────────────────────────────────────────────
true true default default fg/fg (useless)
true true default set HFG/fg
true true set default fg/HBG
true true set set HFG/HBG
──────────────────────────────────────────────────────
default false default default bg/fg
default false default set bg/fg
default false set default fg/HBG
default false set set HFG/HBG
──────────────────────────────────────────────────────
default true default default bg/fg
default true default set bg/fg
default true set default fg/HBG
default true set set HFG/HBG
──────────────────────────────────────────────────────
highlightReverse (class HighlightReverse)
Specifies whether xterm should reverse the selection foreground and background colors when
selecting text with reverse-video attribute. This applies only to the highlightColor and
highlightTextColor resources, e.g., to match the color scheme of xwsh. If “true”, xterm reverses
the colors, If “false”, xterm does not reverse colors, The default is “true”.
highlightSelection (class HighlightSelection)
If “false”, selecting with the mouse highlights all positions on the screen between the beginning
of the selection and the current position. If “true”, xterm highlights only the positions that
contain text that can be selected. The default is “false”.
Depending on the way your applications write to the screen, there may be trailing blanks on a
line. Xterm stores data as it is shown on the screen. Erasing the display changes the internal
state of each cell so it is not considered a blank for the purpose of selection. Blanks written
since the last erase are selectable. If you do not wish to have trailing blanks in a selection,
use the trimSelection resource.
highlightTextColor (class HighlightTextColor)
Specifies the color to use for the foreground of selected (highlighted) text. If not specified
(i.e., matching the default background), reverse video is used. The default is
“XtDefaultBackground”.
hpLowerleftBugCompat (class HpLowerleftBugCompat)
Specifies whether to work around a bug in HP's xdb, which ignores termcap and always sends ESC F
to move to the lower left corner. “true” causes xterm to interpret ESC F as a request to move to
the lower left corner of the screen. The default is “false”.
i18nSelections (class I18nSelections)
If false, xterm will not request the targets COMPOUND_TEXT or TEXT. The default is “true”. It
may be set to false in order to work around ICCCM violations by other X clients.
iconBorderColor (class BorderColor)
Specifies the border color for the active icon window if this feature is compiled into xterm.
Not all window managers will make the icon border visible.
iconBorderWidth (class BorderWidth)
Specifies the border width for the active icon window if this feature is compiled into xterm.
The default is “2”. Not all window managers will make the border visible.
iconFont (class IconFont)
Specifies the font for the miniature active icon window, if this feature is compiled into xterm.
The default is “nil2”.
initialFont (class InitialFont)
Specifies which of the VT100 fonts to use initially. Values are the same as for the set-vt-font
action. The default is “d”, i.e., “default”.
inputMethod (class XtCInputMethod)
Tells xterm which type of input method to use. There is no default method.
internalBorder (class BorderWidth)
Specifies the number of pixels between the characters and the window border. The default is “2”.
italicULMode (class ColorAttrMode)
Specifies whether characters with the underline attribute should be displayed in an italic font
or as underlined characters. It is implemented only for TrueType fonts.
jumpScroll (class JumpScroll)
Specifies whether or not jump scroll should be used. This corresponds to the VT102 DECSCLM
private mode. The default is “true”. See fastScroll for a variation.
keepSelection (class KeepSelection)
Specifies whether xterm will keep the selection even after the selected area was touched by some
output to the terminal. The default is “true”.
keyboardDialect (class KeyboardDialect)
Specifies the initial keyboard dialect, as well as the default value when the terminal is reset.
The value given is the same as the final character in the control sequences which change
character sets. The default is “B”, which corresponds to US ASCII.
nameKeymap (class NameKeymap)
See the discussion of the keymap() action.
limitResize (class LimitResize)
Limits resizing of the screen via control sequence to a given multiple of the display dimensions.
The default is “1”.
locale (class Locale)
Specifies how to use luit, an encoding converter between UTF-8 and locale encodings. The
resource value (ignoring case) may be:
true
xterm will use the encoding specified by the users' LC_CTYPE locale (i.e., LC_ALL, LC_CTYPE,
or LANG variables) as far as possible. This is realized by always enabling UTF-8 mode and
invoking luit in non-UTF-8 locales.
medium
xterm will follow users' LC_CTYPE locale only for UTF-8, east Asian, and Thai locales, where
the encodings were not supported by conventional 8bit mode with changing fonts. For other
locales, xterm will use conventional 8bit mode.
checkfont
If mini-luit is compiled-in, xterm will check if a Unicode font has been specified. If so,
it checks if the character encoding for the current locale is POSIX, Latin-1 or Latin-9, uses
the appropriate mapping to support those with the Unicode font. For other encodings, xterm
assumes that UTF-8 encoding is required.
false
xterm will use conventional 8bit mode or UTF-8 mode according to utf8 resource or -u8 option.
Any other value, e.g., “UTF-8” or “ISO8859-2”, is assumed to be an encoding name; luit will be
invoked to support the encoding. The actual list of supported encodings depends on luit. The
default is “medium”.
Regardless of your locale and encoding, you need an ISO-10646-1 font to display the result. Your
configuration may not include this font, or locale-support by xterm may not be needed. At
startup, xterm uses a mechanism equivalent to the load-vt-fonts(utf8Fonts, Utf8Fonts) action to
load font name subresources of the VT100 widget. That is, resource patterns such as
“*vt100.utf8Fonts.font” will be loaded, and (if this resource is enabled), override the normal
fonts. If no subresources are found, the normal fonts such as “*vt100.font”, etc., are used.
The resource files distributed with xterm use ISO-10646-1 fonts, but do not rely on them unless
you are using the locale mechanism.
localeFilter (class LocaleFilter)
Specifies the file name for the encoding converter from/to locale encodings and UTF-8 which is
used with the -lc option or locale resource. The help message shown by “xterm -help” lists the
default value, which depends on your system configuration.
If the encoding converter requires command-line parameters, you can add those after the command,
e.g.,
*localeFilter: xterm-filter -p
Alternatively, you may put those parameter within a shell script to execute the converter, and
set this resource to point to the shell script.
When using a locale-filter, e.g., with the -e option, or the shell, xterm first tries passing
control via that filter. If it fails, xterm will retry without the locale-filter. Xterm warns
about the failure before retrying.
loginShell (class LoginShell)
Specifies whether or not the shell to be run in the window should be started as a login shell.
The default is “false”.
marginBell (class MarginBell)
Specifies whether or not the bell should be rung when the user types near the right margin. The
default is “false”.
metaSendsEscape (class MetaSendsEscape)
If “true”, Meta characters (a character combined with the Meta modifier key) are converted into a
two-character sequence with the character itself preceded by ESC. This applies as well to
function key control sequences, unless xterm sees that Meta is used in your key translations. If
“false”, Meta characters input from the keyboard are handled according to the eightBitInput
resource. The default is “False”.
mkSamplePass (class MkSamplePass)
If mkSampleSize is nonzero, and mkWidth (and cjkWidth) are false, on startup xterm compares its
built-in tables to the system's wide character width data to decide if it will use the system's
data. It tests the first mkSampleSize character values, and allows up to mkSamplePass mismatches
before the test fails. The default (for the allowed number of mismatches) is 256.
mkSampleSize (class MkSampleSize)
With mkSamplePass, this specifies a startup test used for initializing wide character width
calculations. The default (number of characters to check) is 1024.
mkWidth (class MkWidth)
Specifies whether xterm should use a built-in version of the wide character width calculation.
See also the cjkWidth resource which can override this. The default is “false”.
Here is a summary of the resources which control the choice of wide character width calculation:
cjkWidth mkWidth Action
───────────────────────────────────────────────────────────────
false false use system tables subject to mkSamplePass
false true use built-in tables
true false use built-in CJK tables
true true use built-in CJK tables
modifyCursorKeys (class ModifyCursorKeys)
Tells how to handle the special case where Control-, Shift-, Alt- or Meta-modifiers are used to
add a parameter to the escape sequence returned by a cursor-key. The default is “2”:
-1 disables the feature.
0 uses the old/obsolete behavior.
1 prefixes modified sequences with CSI.
2 forces the modifier to be the second parameter if it would otherwise be the first.
3 marks the sequence with a “>” to hint that it is private.
modifyFunctionKeys (class ModifyFunctionKeys)
Tells how to handle the special case where Control-, Shift-, Alt- or Meta-modifiers are used to
add a parameter to the escape sequence returned by a (numbered) function-key. The default is
“2”. The resource values are similar to modifyCursorKeys:
-1 permits the user to use shift- and control-modifiers to construct function-key strings using
the normal encoding scheme.
0 uses the old/obsolete behavior.
1 prefixes modified sequences with CSI.
2 forces the modifier to be the second parameter if it would otherwise be the first.
3 marks the sequence with a “>” to hint that it is private.
If modifyFunctionKeys is zero, xterm uses Control- and Shift-modifiers to allow the user to
construct numbered function-keys beyond the set provided by the keyboard:
Control
adds the value given by the ctrlFKeys resource.
Shift
adds twice the value given by the ctrlFKeys resource.
Control/Shift
adds three times the value given by the ctrlFKeys resource.
modifyKeyboard (class ModifyKeyboard)
Normally xterm makes a special case regarding modifiers (shift, control, etc.) to handle special
keyboard layouts (legacy and vt220). This is done to provide compatible keyboards for DEC VT220
and related terminals that implement user-defined keys (UDK).
The bits of the resource value selectively enable modification of the given category when these
keyboards are selected. The default is “0”:
0 The legacy/vt220 keyboards interpret only the Control-modifier when constructing numbered
function-keys. Other special keys are not modified.
1 allows modification of the numeric keypad
2 allows modification of the editing keypad
4 allows modification of function-keys, overrides use of Shift-modifier for UDK.
8 allows modification of other special keys
modifyOtherKeys (class ModifyOtherKeys)
Like modifyCursorKeys, tells xterm to construct an escape sequence for other keys (such as “2”)
when modified by Control-, Alt- or Meta-modifiers. This feature does not apply to function keys
and well-defined keys such as ESC or the control keys. The default is “0”:
0 disables this feature.
1 enables this feature for keys except for those with well-known behavior, e.g., Tab,
Backarrow and some special control character cases, e.g., Control-Space to make a NUL.
2 enables this feature for keys including the exceptions listed.
multiClickTime (class MultiClickTime)
Specifies the maximum time in milliseconds between multi-click select events. The default is
“250” milliseconds.
multiScroll (class MultiScroll)
Specifies whether or not scrolling should be done asynchronously. The default is “false”.
nMarginBell (class Column)
Specifies the number of characters from the right margin at which the margin bell should be rung,
when enabled by the marginBell resource. The default is “10”.
numLock (class NumLock)
If “true”, xterm checks if NumLock is used as a modifier (see xmodmap(1)). If so, this modifier
is used to simplify the logic when implementing special NumLock for the sunKeyboard resource.
Also (when sunKeyboard is false), similar logic is used to find the modifier associated with the
left and right Alt keys. The default is “true”.
oldXtermFKeys (class OldXtermFKeys)
If “true”, xterm will use old-style control sequences for function keys F1 to F4, for
compatibility with X Consortium xterm. Otherwise, it uses the VT100-style codes for PF1 to PF4.
The default is “false”.
on2Clicks (class On2Clicks)
on3Clicks (class On3Clicks)
on4Clicks (class On4Clicks)
on5Clicks (class On5Clicks)
Specify selection behavior in response to multiple mouse clicks. A single mouse click is always
interpreted as described in the SELECTION section (see POINTER USAGE). Multiple mouse clicks
(using the button which activates the select-start action) are interpreted according to the
resource values of on2Clicks, etc. The resource value can be one of these:
word
Select a “word” as determined by the charClass resource. See the CHARACTER CLASSES section.
line
Select a line (counting wrapping).
group
Select a group of adjacent lines (counting wrapping). The selection stops on a blank line,
and does not extend outside the current page.
page
Select all visible lines, i.e., the page.
all
Select all lines, i.e., including the saved lines.
regex
Select a “word” as determined by the regular expression which follows in the resource value.
none
No selection action is associated with this resource. xterm interprets it as the end of the
list. For example, you may use it to disable triple (and higher) clicking by setting
on3Clicks to “none”.
The default values for on2Clicks and on3Clicks are “word” and “line”, respectively. There is no
default value for on4Clicks or on5Clicks, making those inactive. On startup, xterm determines
the maximum number of clicks by the onXClicks resource values which are set.
openIm (class XtCOpenIm)
Tells xterm whether to open the input method at startup. The default is “true”.
pointerColor (class PointerColor)
Specifies the foreground color of the pointer. The default is “XtDefaultForeground”.
pointerColorBackground (class PointerColorBackground)
Specifies the background color of the pointer. The default is “XtDefaultBackground”.
pointerMode (class PointerMode)
Specifies when the pointer may be hidden as the user types. It will be redisplayed if the user
moves the mouse, or clicks one of its buttons.
0 never
1 the application running in xterm has not activated mouse mode. This is the default.
2 always.
pointerShape (class Cursor)
Specifies the name of the shape of the pointer. The default is “xterm”.
popOnBell (class PopOnBell)
Specifies whether the window would be raised when Control-G is received. The default is “false”.
If the window is iconified, this has no effect. However, the zIconBeep resource provides you
with the ability to see which iconified windows have sounded a bell.
precompose (class XtCPrecompose)
Tells xterm whether to precompose UTF-8 data into Normalization Form C, which combines commonly-
used accents onto base characters. If it does not do this, accents are left as separatate
characters. The default is “true”.
preeditType (class XtCPreeditType)
Tells xterm which types of preedit (preconversion) string to display. The default is
“OverTheSpot,Root”.
printAttributes (class PrintAttributes)
Specifies whether to print graphic attributes along with the text. A real DEC VTxxx terminal
will print the underline, highlighting codes but your printer may not handle these.
• “0” disables the attributes.
• “1” prints the normal set of attributes (bold, underline, inverse and blink) as VT100-style
control sequences.
• “2” prints ANSI color attributes as well.
The default is “1”.
printFileImmediate (PrintFileImmediate)
When the print-immediate action is invoked, xterm prints the screen contents directly to a file.
Set this resource to the prefix of the filename (a timestamp will be appended to the actual
name).
The default is an empty string, i.e., “”, However, when the print-immediate action is invoked, if
the string is empty, then “XTerm” is used.
printFileOnXError (PrintFileOnXError)
If xterm exits with an X error, e.g., your connection is broken when the server crashes, it can
be told to write the contents of the screen to a file. To enable the feature, set this resource
to the prefix of the filename (a timestamp will be appended to the actual name).
The default is an empty string, i.e., “”, which disables this feature. However, when the print-
on-error action is invoked, if the string is empty, then “XTermError” is used.
These error codes are handled: ERROR_XERROR, ERROR_XIOERROR and ERROR_ICEERROR.
printModeImmediate (PrintModeImmediate)
When the print-immediate action is invoked, xterm prints the screen contents directly to a file.
You can use the printModeImmediate resource to tell it to use escape sequences to reconstruct the
video attributes and colors. This uses the same values as the printAttributes resource. The
default is “0”.
printModeOnXError (PrintModeOnXError)
Xterm implements the printFileOnXError feature using the printer feature, although the output is
written directly to a file. You can use the printModeOnXError resource to tell it to use escape
sequences to reconstruct the video attributes and colors. This uses the same values as the
printAttributes resource. The default is “0”.
printOptsImmediate (PrintOptsImmediate)
Specify the range of text which is printed to a file when the print-immediately action is
invoked.
• If zero (0), then this selects the current (visible screen) plus the saved lines, except if
the alternate screen is being used. In that case, only the alternate screen is selectd.
• If nonzero, the bits of this resource value (checked in descending order) select the range:
8 selects the saved lines.
4 selects the alternate screen.
2 selects the normal screen.
1 selects the current screen, which can be either the normal or alternate screen.
The default is “9”, which selects the current visible screen plus saved lines, with no special
case for the alternated screen.
printOptsOnXError (PrintOptsOnXError)
Specify the range of text which is printed to a file when the print-on-error action is invoked.
The resource value is interpreted the same as in printOptsImmediate.
The default is “9”, which selects the current visible screen plus saved lines, with no special
case for the alternated screen.
printerAutoClose (class PrinterAutoClose)
If “true”, xterm will close the printer (a pipe) when the application switches the printer
offline with a Media Copy command. The default is “false”.
printerCommand (class PrinterCommand)
Specifies a shell command to which xterm will open a pipe when the first MC (Media Copy) command
is initiated. The default is an empty string, i.e., “”. If the resource value is given as an
empty string, the printer is disabled.
printerControlMode (class PrinterControlMode)
Specifies the printer control mode. A “1” selects autoprint mode, which causes xterm to print a
line from the screen when you move the cursor off that line with a line feed, form feed or
vertical tab character, or an autowrap occurs. Autoprint mode is overridden by printer
controller mode (a “2”), which causes all of the output to be directed to the printer. The
default is “0”.
printerExtent (class PrinterExtent)
Controls whether a print page function will print the entire page (true), or only the the portion
within the scrolling margins (false). The default is “false”.
printerFormFeed (class PrinterFormFeed)
Controls whether a form feed is sent to the printer at the end of a print page function. The
default is “false”.
printerNewLine (class PrinterNewLine)
Controls whether a newline is sent to the printer at the end of a print page function. The
default is “true”.
privateColorRegisters (class privateColorRegisters)
If true, allocate separate color registers for each sixel device control string, e.g., for
DECGCI. If not true, color registers are allocated only once, when the terminal is reset. The
default is “true”.
quietGrab (class QuietGrab)
Controls whether the cursor is repainted when NotifyGrab and NotifyUngrab event types are
received during change of focus. The default is “false”.
renderFont (class RenderFont)
If xterm is built with the Xft library, this controls whether the faceName resource is used. The
default is “default”.
The resource values are strings, evaluated as booleans after startup.
false
disable the feature and use the normal (bitmap) font.
true
startup using the TrueType font specified by the faceName and faceSize resource settings.
If there is no value for faceName, disable the feature and use the normal (bitmap) font.
After startup, you can still switch to/from the bitmap font using the “TrueType Fonts” menu
entry.
default
startup using the normal (bitmap) font, but enable the “TrueType Fonts” menu entry to allow
runtime switching to/from TrueType fonts.
If there is no faceName resource set, then runtime switching to TrueType fonts is disabled.
Xterm has a separate compiled-in value for faceName for the special case where renderFont
is “default”. That is normally “mono”.
resizeGravity (class ResizeGravity)
Affects the behavior when the window is resized to be taller or shorter. NorthWest specifies
that the top line of text on the screen stay fixed. If the window is made shorter, lines are
dropped from the bottom; if the window is made taller, blank lines are added at the bottom. This
is compatible with the behavior in R4. SouthWest (the default) specifies that the bottom line of
text on the screen stay fixed. If the window is made taller, additional saved lines will be
scrolled down onto the screen; if the window is made shorter, lines will be scrolled off the top
of the screen, and the top saved lines will be dropped.
retryInputMethod (class XtCRetryInputMethod)
Tells xterm how many times to retry, in case the input-method server is not responding. This is
a different issue than unsupported preedit type, etc. You may encounter retries if your X
configuration (and its libraries) are missing pieces. Setting this resource to zero ``0'' will
cancel the retrying. The default is ``3''.
reverseVideo (class ReverseVideo)
Specifies whether or not reverse video should be simulated. The default is “false”.
There are several aspects to reverse video in xterm:
• The command-line -rv option tells the X libraries to reverse the foreground and background
colors. Xterm's command-line options set resource values. In particular, the X Toolkit sets
the reverseVideo resource when the -rv option is used.
• If the user has also used command-line options -fg or -bg to set the foreground and
background colors, xterm does not see these options directly. Instead, it examines the
resource values to reconstruct the command-line options, and determine which of the colors is
the user's intended foreground, etc. Their actual values are irrelevant to the reverse video
function; some users prefer the X defaults (black text on a white background), others prefer
white text on a black background.
• After startup, the user can toggle the “Enable Reverse Video” menu entry. This exchanges the
current foreground and background colors of the VT100 widget, and repaints the screen.
Because of the X resource hierarchy, the reverseVideo resource applies to more than the VT100
widget.
Programs running in an xterm can also use control sequences to enable the VT100 reverse video
mode. These are independent of the reverseVideo resource and the menu entry. Xterm exchanges
the current foreground and background colors when drawing text affected by these control
sequences.
Other control sequences can alter the foreground and background colors which are used:
• Programs can also use the ANSI color control sequences to set the foreground and background
colors.
• Extensions to the ANSI color controls (such as 16-, 88- or 256-colors) are treated similarly
to the ANSI control.
• Using other control sequences (the “dynamic colors” feature), a program can change the
foreground and background colors.
reverseWrap (class ReverseWrap)
Specifies whether or not reverse-wraparound should be enabled. This corresponds to xterm's
private mode 45. The default is “false”.
rightScrollBar (class RightScrollBar)
Specifies whether or not the scrollbar should be displayed on the right rather than the left.
The default is “false”.
saveLines (class SaveLines)
Specifies the number of lines to save beyond the top of the screen when a scrollbar is turned on.
The default is “64”.
scrollBar (class ScrollBar)
Specifies whether or not the scrollbar should be displayed. The default is “false”.
scrollBarBorder (class ScrollBarBorder)
Specifies the width of the scrollbar border. Note that this is drawn to overlap the border of
the xterm window. Modifying the scrollbar's border affects only the line between the VT100
widget and the scrollbar. The default value is 1.
scrollKey (class ScrollCond)
Specifies whether or not pressing a key should automatically cause the scrollbar to go to the
bottom of the scrolling region. This corresponds to xterm's private mode 1011. The default is
“false”.
scrollLines (class ScrollLines)
Specifies the number of lines that the scroll-back and scroll-forw actions should use as a
default. The default value is 1.
scrollTtyOutput (class ScrollCond)
Specifies whether or not output to the terminal should automatically cause the scrollbar to go to
the bottom of the scrolling region. The default is “true”.
selectToClipboard (class SelectToClipboard)
Tells xterm whether to use the PRIMARY or CLIPBOARD for SELECT tokens in the selection mechanism.
The set-select action can change this at runtime, allowing the user to work with programs that
handle only one of these mechanisms. The default is “false”, which tells it to use PRIMARY.
shiftFonts (class ShiftFonts)
Specifies whether to enable the actions larger-vt-font() and smaller-vt-font(), which are
normally bound to the shifted KP_Add and KP_Subtract. The default is “true”.
showBlinkAsBold (class ShowBlinkAsBold)
Tells xterm whether to display text with blink-attribute the same as bold. If xterm has not been
configured to support blinking text, the default is “true”, which corresponds to older versions
of xterm, otherwise the default is “false”.
showMissingGlyphs (class ShowMissingGlyphs)
Tells xterm whether to display a box outlining places where a character has been used that the
font does not represent. The default is “false”.
showWrapMarks (class ShowWrapMarks)
For debugging xterm and applications that may manipulate the wrapped-line flag by writing text at
the right margin, show a mark on the right inner-border of the window. The mark shows which
lines have the flag set.
signalInhibit (class SignalInhibit)
Specifies whether or not the entries in the “Main Options” menu for sending signals to xterm
should be disallowed. The default is “false”.
sixelScrolling (class SixelScrolling)
If true, graphics scroll up one line at a time when sixels would be written past the bottom line
on the window. The default is “false”.
tekGeometry (class Geometry)
Specifies the preferred size and position of the Tektronix window. There is no default for this
resource.
tekInhibit (class TekInhibit)
Specifies whether or not the escape sequence to enter Tektronix mode should be ignored. The
default is “false”.
tekSmall (class TekSmall)
Specifies whether or not the Tektronix mode window should start in its smallest size if no
explicit geometry is given. This is useful when running xterm on displays with small screens.
The default is “false”.
tekStartup (class TekStartup)
Specifies whether or not xterm should start up in Tektronix mode. The default is “false”.
tiXtraScroll (class TiXtraScroll)
Specifies whether xterm should scroll to a new page when processing the ti termcap entry, i.e.,
the private modes 47, 1047 or 1049. This is only in effect if titeInhibit is “true”, because the
intent of this option is to provide a picture of the full-screen application's display on the
scrollback without wiping out the text that would be shown before the application was
initialized. The default for this resource is “false”.
titeInhibit (class TiteInhibit)
Specifies whether or not xterm should remove ti and te termcap entries (used to switch between
alternate screens on startup of many screen-oriented programs) from the TERMCAP string. If set,
xterm also ignores the escape sequence to switch to the alternate screen. Xterm supports
terminfo in a different way, supporting composite control sequences (also known as private modes)
1047, 1048 and 1049 which have the same effect as the original 47 control sequence. The default
for this resource is “false”.
titleModes (class TitleModes)
Tells xterm whether to accept or return window- and icon-labels in ISO-8859-1 (the default) or
UTF-8. Either can be encoded in hexadecimal. The default for this resource is “0”.
Each bit (bit “0” is 1, bit “1” is 2, etc.) corresponds to one of the parameters set by the
title modes control sequence:
0 Set window/icon labels using hexadecimal
1 Query window/icon labels using hexadecimal
2 Set window/icon labels using UTF-8 (overrides utf8Title resource).
3 Query window/icon labels using UTF-8
translations (class Translations)
Specifies the key and button bindings for menus, selections, “programmed strings”, etc. The
translations resource, which provides much of xterm's configurability, is a feature of the X
Toolkit Intrinsics library (Xt). See the ACTIONS section.
trimSelection (class TrimSelection)
If you set highlightSelection, you can see the text which is selected, including any trailing
spaces. Clearing the screen (or a line) resets it to a state containing no spaces. Some lines
may contain trailing spaces when an application writes them to the screen. However, you may not
wish to paste lines with trailing spaces. If this resource is true, xterm will trim trailing
spaces from text which is selected. It does not affect spaces which result in a wrapped line,
nor will it trim the trailing newline from your selection. The default is “false”.
underLine (class UnderLine)
This specifies whether or not text with the underline attribute should be underlined. It may be
desirable to disable underlining when color is being used for the underline attribute. The
default is “true”.
useClipping (class UseClipping)
Tell xterm whether to use clipping to keep from producing dots outside the text drawing area.
Originally used to work around for overstriking effects, this is also needed to work with some
incorrectly-sized fonts. The default is “true”.
utf8 (class Utf8)
This specifies whether xterm will run in UTF-8 mode. If you set this resource, xterm also sets
the wideChars resource as a side-effect. The resource can be set via the menu entry “UTF-8
Encoding”. The default is “default”.
Xterm accepts either a keyword (ignoring case) or the number shown in parentheses:
false (0)
UTF-8 mode is initially off. The command-line option +u8 sets the resource to this value.
Escape sequences for turning UTF-8 mode on/off are allowed.
true (1)
UTF-8 mode is initially on. Escape sequences for turning UTF-8 mode on/off are allowed.
always (2)
The command-line option -u8 sets the resource to this value. Escape sequences for turning
UTF-8 mode on/off are ignored.
default (3)
This is the default value of the resource. It is changed during initialization depending on
whether the locale resource was set, to false (0) or always (2). See the locale resource for
additional discussion of non-UTF-8 locales.
If you want to set the value of utf8, it should be in this range. Other nonzero values are
treated the same as “1”, i.e., UTF-8 mode is initially on, and escape sequences for turning UTF-8
mode on/off are allowed.
utf8Fonts (class Utf8Fonts)
See the discussion of the locale resource. This specifies whether xterm will use UTF-8 fonts
specified via resource patterns such as “*vt100.utf8Fonts.font” or normal (ISO-8859-1) fonts via
patterns such as “*vt100.font”. The resource can be set via the menu entry “UTF-8 Fonts”. The
default is “default”.
Xterm accepts either a keyword (ignoring case) or the number shown in parentheses:
false (0)
Use the ISO-8859-1 fonts. The menu entry is enabled, allowing the choice of fonts to be
changed at runtime.
true (1)
Use the UTF-8 fonts. The menu entry is enabled, allowing the choice of fonts to be
changed at runtime.
always (2)
Always use the UTF-8 fonts. This also disables the menu entry.
default (3)
At startup, the resource is set to true or false, according to the effective value of the
utf8 resource.
utf8Latin1 (class Utf8Latin1)
If true, allow an ISO-8859-1 normal font to be combined with an ISO-10646 font if the latter is
given via the -fw option or its corresponding resource value. The default is “false”.
utf8SelectTypes (class Utf8SelectTypes)
Override xterm's default selection target list (see SELECT/PASTE) for selections in wide-
character (UTF-8) mode. The default is an empty string, i.e., “”, which does not override
anything.
utf8Title (class Utf8Title)
Applications can set xterm's title by writing a control sequence. Normally this control sequence
follows the VT220 convention, which encodes the string in ISO-8859-1 and allows for an 8-bit
string terminator. If xterm is started in a UTF-8 locale, it translates the ISO-8859-1 string to
UTF-8 to work with the X libraries which assume the string is UTF-8.
However, some users may wish to write a title string encoded in UTF-8. The window manager is
responsible for drawing window titles. Some window managers (not all) support UTF-8 encoding of
window titles. Set this resource to “true” to allow UTF-8 encoded title strings. That cancels
the translation to UTF-8, allowing UTF-8 strings to be displayed as is.
This feature is available as a menu entry, since it is related to the particular applications you
are running within xterm. You can also use a control sequence (see the discussion of “Title
Modes” in the control sequences document), to set an equivalent flag. The titleModes resource
sets the same value, which overrides this resource.
The default is “false”.
veryBoldColors (class VeryBoldColors)
Specifies whether to combine video attributes with colors specified by colorBD, colorBL, colorRV
and colorUL. The resource value is the sum of values for each attribute:
1 for reverse,
2 for underline,
4 for bold and
8 for blink.
The default is “0”.
visualBell (class VisualBell)
Specifies whether or not a visible bell (i.e., flashing) should be used instead of an audible
bell when Control-G is received. The default is “false”, which tells xterm to use an audible
bell.
visualBellDelay (class VisualBellDelay)
Number of milliseconds to delay when displaying a visual bell. Default is 100. If set to zero,
no visual bell is displayed. This is useful for very slow displays, e.g., an LCD display on a
laptop.
visualBellLine (class VisualBellLine)
Specifies whether to flash only the current line when displaying a visual bell. rather than
flashing the entire screen: The default is “false”, which tells xterm to flash the entire screen.
vt100Graphics (class VT100Graphics)
This specifies whether xterm will interpret VT100 graphic character escape sequences while in
UTF-8 mode. The default is “true”, to provide support for various legacy applications.
wideBoldFont (class WideBoldFont)
This option specifies the font to be used for displaying bold wide text. By default, it will
attempt to use a font twice as wide as the font that will be used to draw bold text. If no
double-width font is found, it will improvise, by stretching the bold font.
wideChars (class WideChars)
Specifies if xterm should respond to control sequences that process 16-bit characters. The
default is “false”.
wideFont (class WideFont)
This option specifies the font to be used for displaying wide text. By default, it will attempt
to use a font twice as wide as the font that will be used to draw normal text. If no double-
width font is found, it will improvise, by stretching the normal font.
ximFont (class XimFont)
This option specifies the font to be used for displaying the preedit string in the “OverTheSpot”
input method.
In “OverTheSpot” preedit type, the preedit (preconversion) string is displayed at the position of
the cursor. It is the XIM server's responsibility to display the preedit string. The XIM client
must inform the XIM server of the cursor position. For best results, the preedit string must be
displayed with a proper font. Therefore, xterm informs the XIM server of the proper font. The
font is be supplied by a "fontset", whose default value is “*”. This matches every font, the X
library automatically chooses fonts with proper charsets. The ximFont resource is provided to
override this default font setting.
Tek4014 Widget Resources
The following resources are specified as part of the tek4014 widget (class Tek4014). These are specified
by patterns such as “XTerm.tek4014.NAME”:
font2 (class Font)
Specifies font number 2 to use in the Tektronix window.
font3 (class Font)
Specifies font number 3 to use in the Tektronix window.
fontLarge (class Font)
Specifies the large font to use in the Tektronix window.
fontSmall (class Font)
Specifies the small font to use in the Tektronix window.
ginTerminator (class GinTerminator)
Specifies what character(s) should follow a GIN report or status report. The possibilities are
“none”, which sends no terminating characters, “CRonly”, which sends CR, and “CR&EOT”, which
sends both CR and EOT. The default is “none”.
height (class Height)
Specifies the height of the Tektronix window in pixels.
initialFont (class InitialFont)
Specifies which of the four Tektronix fonts to use initially. Values are the same as for the
set-tek-text action. The default is “large”.
width (class Width)
Specifies the width of the Tektronix window in pixels.
Menu Resources
The resources that may be specified for the various menus are described in the documentation for the
Athena SimpleMenu widget. The name and classes of the entries in each of the menus are listed below.
Resources named “lineN” where N is a number are separators with class SmeLine.
As with all X resource-based widgets, the labels mentioned are customary defaults for the application.
The Main Options menu (widget name mainMenu) has the following entries:
toolbar (class SmeBSB)
This entry invokes the set-toolbar(toggle) action.
securekbd (class SmeBSB)
This entry invokes the secure() action.
allowsends (class SmeBSB)
This entry invokes the allow-send-events(toggle) action.
redraw (class SmeBSB)
This entry invokes the redraw() action.
logging (class SmeBSB)
This entry invokes the logging(toggle) action.
print-immediate (class SmeBSB)
This entry invokes the print-immediate() action.
print-on-error (class SmeBSB)
This entry invokes the print-on-error() action.
print (class SmeBSB)
This entry invokes the print() action.
print-redir (class SmeBSB)
This entry invokes the print-redir() action.
8-bit-control (class SmeBSB)
This entry invokes the set-8-bit-control(toggle) action.
backarrow key (class SmeBSB)
This entry invokes the set-backarrow(toggle) action.
num-lock (class SmeBSB)
This entry invokes the set-num-lock(toggle) action.
alt-esc (class SmeBSB)
This entry invokes the alt-sends-escape(toggle) action.
meta-esc (class SmeBSB)
This entry invokes the meta-sends-escape(toggle) action.
delete-is-del (class SmeBSB)
This entry invokes the delete-is-del(toggle) action.
oldFunctionKeys (class SmeBSB)
This entry invokes the old-function-keys(toggle) action.
hpFunctionKeys (class SmeBSB)
This entry invokes the hp-function-keys(toggle) action.
scoFunctionKeys (class SmeBSB)
This entry invokes the sco-function-keys(toggle) action.
sunFunctionKeys (class SmeBSB)
This entry invokes the sun-function-keys(toggle) action.
sunKeyboard (class SmeBSB)
This entry invokes the sunKeyboard(toggle) action.
suspend (class SmeBSB)
This entry invokes the send-signal(tstp) action on systems that support job control.
continue (class SmeBSB)
This entry invokes the send-signal(cont) action on systems that support job control.
interrupt (class SmeBSB)
This entry invokes the send-signal(int) action.
hangup (class SmeBSB)
This entry invokes the send-signal(hup) action.
terminate (class SmeBSB)
This entry invokes the send-signal(term) action.
kill (class SmeBSB)
This entry invokes the send-signal(kill) action.
quit (class SmeBSB)
This entry invokes the quit() action.
The VT Options menu (widget name vtMenu) has the following entries:
scrollbar (class SmeBSB)
This entry invokes the set-scrollbar(toggle) action.
jumpscroll (class SmeBSB)
This entry invokes the set-jumpscroll(toggle) action.
reversevideo (class SmeBSB)
This entry invokes the set-reverse-video(toggle) action.
autowrap (class SmeBSB)
This entry invokes the set-autowrap(toggle) action.
reversewrap (class SmeBSB)
This entry invokes the set-reversewrap(toggle) action.
autolinefeed (class SmeBSB)
This entry invokes the set-autolinefeed(toggle) action.
appcursor (class SmeBSB)
This entry invokes the set-appcursor(toggle) action.
appkeypad (class SmeBSB)
This entry invokes the set-appkeypad(toggle) action.
scrollkey (class SmeBSB)
This entry invokes the set-scroll-on-key(toggle) action.
scrollttyoutput (class SmeBSB)
This entry invokes the set-scroll-on-tty-output(toggle) action.
allow132 (class SmeBSB)
This entry invokes the set-allow132(toggle) action.
cursesemul (class SmeBSB)
This entry invokes the set-cursesemul(toggle) action.
visualbell (class SmeBSB)
This entry invokes the set-visualbell(toggle) action.
bellIsUrgent (class SmeBSB)
This entry invokes the set-bellIsUrgent(toggle) action.
poponbell (class SmeBSB)
This entry invokes the set-poponbell(toggle) action.
cursorblink (class SmeBSB)
This entry invokes the set-cursorblink(toggle) action.
titeInhibit (class SmeBSB)
This entry invokes the set-titeInhibit(toggle) action.
activeicon (class SmeBSB)
This entry toggles active icons on and off if this feature was compiled into xterm. It is
enabled only if xterm was started with the command line option +ai or the activeIcon resource is
set to “true”.
softreset (class SmeBSB)
This entry invokes the soft-reset() action.
hardreset (class SmeBSB)
This entry invokes the hard-reset() action.
clearsavedlines (class SmeBSB)
This entry invokes the clear-saved-lines() action.
tekshow (class SmeBSB)
This entry invokes the set-visibility(tek,toggle) action.
tekmode (class SmeBSB)
This entry invokes the set-terminal-type(tek) action.
vthide (class SmeBSB)
This entry invokes the set-visibility(vt,off) action.
altscreen (class SmeBSB)
This entry invokes the set-altscreen(toggle) action.
sixelScrolling (class SmeBSB)
This entry invokes the set-sixel-scrolling(toggle) action.
The VT Fonts menu (widget name fontMenu) has the following entries:
fontdefault (class SmeBSB)
This entry invokes the set-vt-font(d) action, setting the font using the font (default) resource,
e.g., “Default” in the menu.
font1 (class SmeBSB)
This entry invokes the set-vt-font(1) action, setting the font using the font1 resource, e.g.,
“Unreadable” in the menu.
font2 (class SmeBSB)
This entry invokes the set-vt-font(2) action, setting the font using the font2 resource, e.g.,
“Tiny” in the menu.
font3 (class SmeBSB)
This entry invokes the set-vt-font(3) action, setting the font using the font3 resource, e.g.,
“Small” in the menu.
font4 (class SmeBSB)
This entry invokes the set-vt-font(4) action, letting the font using the font4 resource, e.g.,
“Medium” in the menu.
font5 (class SmeBSB)
This entry invokes the set-vt-font(5) action, letting the font using the font5 resource, e.g.,
“Large” in the menu.
font6 (class SmeBSB)
This entry invokes the set-vt-font(6) action, letting the font using the font6 resource, e.g.,
“Huge” in the menu.
fontescape (class SmeBSB)
This entry invokes the set-vt-font(e) action.
fontsel (class SmeBSB)
This entry invokes the set-vt-font(s) action.
font-linedrawing (class SmeBSB)
This entry invokes the set-font-linedrawing(s) action.
font-packed (class SmeBSB)
This entry invokes the set-font-packed(s) action.
font-doublesize (class SmeBSB)
This entry invokes the set-font-doublesize(s) action.
render-font (class SmeBSB)
This entry invokes the set-render-font(s) action.
utf8-mode (class SmeBSB)
This entry invokes the set-utf8-mode(s) action.
utf8-title (class SmeBSB)
This entry invokes the set-utf8-title(s) action.
The TEK Options menu (widget name tekMenu) has the following entries:
tektextlarge (class SmeBSB)
This entry invokes the set-tek-text(large) action.
tektext2 (class SmeBSB)
This entry invokes the set-tek-text(2) action.
tektext3 (class SmeBSB)
This entry invokes the set-tek-text(3) action.
tektextsmall (class SmeBSB)
This entry invokes the set-tek-text(small) action.
tekpage (class SmeBSB)
This entry invokes the tek-page() action.
tekreset (class SmeBSB)
This entry invokes the tek-reset() action.
tekcopy (class SmeBSB)
This entry invokes the tek-copy() action.
vtshow (class SmeBSB)
This entry invokes the set-visibility(vt,toggle) action.
vtmode (class SmeBSB)
This entry invokes the set-terminal-type(vt) action.
tekhide (class SmeBSB)
This entry invokes the set-visibility(tek,toggle) action.
Scrollbar Resources
The following resources are useful when specified for the Athena Scrollbar widget:
thickness (class Thickness)
Specifies the width in pixels of the scrollbar.
background (class Background)
Specifies the color to use for the background of the scrollbar.
foreground (class Foreground)
Specifies the color to use for the foreground of the scrollbar. The “thumb” of the scrollbar is
a simple checkerboard pattern alternating pixels for foreground and background color.
POINTER USAGE
Once the VT102 window is created, xterm allows you to select text and copy it within the same or other
windows.
SELECTION
The selection functions are invoked when the pointer buttons are used with no modifiers, and when they
are used with the “shift” key. The assignment of the functions described below to keys and buttons may
be changed through the resource database; see ACTIONS below.
Pointer button one (usually left) is used to save text into the cut buffer. Move the cursor to beginning
of the text, and then hold the button down while moving the cursor to the end of the region and releasing
the button. The selected text is highlighted and is saved in the global cut buffer and made the PRIMARY
selection when the button is released. Normally (but see the discussion of on2Clicks, etc):
• Double-clicking selects by words.
• Triple-clicking selects by lines.
• Quadruple-clicking goes back to characters, etc.
Multiple-click is determined by the time from button up to button down, so you can change the selection
unit in the middle of a selection. Logical words and lines selected by double- or triple-clicking may
wrap across more than one screen line if lines were wrapped by xterm itself rather than by the
application running in the window. If the key/button bindings specify that an X selection is to be made,
xterm will leave the selected text highlighted for as long as it is the selection owner.
Pointer button two (usually middle) “types” (pastes) the text from the PRIMARY selection, if any,
otherwise from the cut buffer, inserting it as keyboard input.
Pointer button three (usually right) extends the current selection. (Without loss of generality, you can
swap “right” and “left” everywhere in the rest of this paragraph.) If pressed while closer to the right
edge of the selection than the left, it extends/contracts the right edge of the selection. If you
contract the selection past the left edge of the selection, xterm assumes you really meant the left edge,
restores the original selection, then extends/contracts the left edge of the selection. Extension starts
in the selection unit mode that the last selection or extension was performed in; you can multiple-click
to cycle through them.
By cutting and pasting pieces of text without trailing new lines, you can take text from several places
in different windows and form a command to the shell, for example, or take output from a program and
insert it into your favorite editor. Since cut buffers are globally shared among different applications,
you may regard each as a “file” whose contents you know. The terminal emulator and other text programs
should be treating it as if it were a text file, i.e., the text is delimited by new lines.
SCROLLING
The scroll region displays the position and amount of text currently showing in the window (highlighted)
relative to the amount of text actually saved. As more text is saved (up to the maximum), the size of
the highlighted area decreases.
Clicking button one with the pointer in the scroll region moves the adjacent line to the top of the
display window.
Clicking button three moves the top line of the display window down to the pointer position.
Clicking button two moves the display to a position in the saved text that corresponds to the pointer's
position in the scrollbar.
TEKTRONIX POINTER
Unlike the VT102 window, the Tektronix window does not allow the copying of text. It does allow
Tektronix GIN mode, and in this mode the cursor will change from an arrow to a cross. Pressing any key
will send that key and the current coordinate of the cross cursor. Pressing button one, two, or three
will return the letters “l”, “m”, and “r”, respectively. If the “shift” key is pressed when a pointer
button is pressed, the corresponding upper case letter is sent. To distinguish a pointer button from a
key, the high bit of the character is set (but this is bit is normally stripped unless the terminal mode
is RAW; see tty(4) for details).
SELECT/PASTE
X clients provide select and paste support by responding to requests conveyed by the server.
PRIMARY
When configured to use the primary selection, (the default) xterm can provide the selection data in ways
which help to retain character encoding information as it is pasted.
A user “selects” text on xterm, which highlights the selected text. A subsequent “paste” to another
client forwards a request to the client owning the selection. If xterm owns the primary selection, it
makes the data available in the form of one or more “selection targets”. If it does not own the primary
selection, e.g., if it has released it or another client has asserted ownership, it relies on cut-buffers
to pass the data. But cut-buffers handle only ISO-8859-1 data (officially - some clients ignore the
rules).
CLIPBOARD
When configured to use the clipboard (see resource selectToClipboard), the problem with persistence of
ownership is bypassed. Otherwise, there is no difference regarding the data which can be passed via
selection.
SELECTION TARGETS
The different types of data which are passed depend on what the receiving client asks for. These are
termed selection targets.
When asking for the selection data, xterm tries the following types in this order:
UTF8_STRING
This is an XFree86 extension, which denotes that the data is encoded in UTF-8. When xterm is
built with wide-character support, it both accepts and provides this type.
TEXT the text is in the encoding which corresponds to your current locale.
COMPOUND_TEXT
this is a format for multiple character set data, such as multi-lingual text. It can store
UTF-8 data as a special case.
STRING
This is Latin 1 (ISO-8859-1) data.
The middle two (TEXT and COMPOUND_TEXT) are added if xterm is configured with the i18nSelections resource
set to “true”.
UTF8_STRING is preferred (therefore first in the list) since xterm stores text as Unicode data when
running in wide-character mode, and no translation is needed. On the other hand, TEXT and COMPOUND_TEXT
may require translation. If the translation is incomplete, they will insert X's “defaultString” whose
value cannot be set, and may simply be empty. Xterm's defaultString resource specifies the string to use
for incomplete translations of the UTF8_STRING.
You can alter the types which xterm tries using the eightBitSelectTypes or utf8SelectTypes resources.
For instance, you might have some specific locale setting which does not use UTF-8 encoding. The
resource value is a comma-separated list of the selection targets, which consist of the names shown. You
can use the special name I18N to denote the optional inclusion of TEXT and COMPOUND_TEXT. The names are
matched ignoring case, and can be abbreviated. The default list can be expressed in several ways, e.g.,
UTF8_STRING,I18N,STRING
utf8,i18n,string
u,i,s
MENUS
Xterm has four menus, named mainMenu, vtMenu, fontMenu, and tekMenu. Each menu pops up under the correct
combinations of key and button presses. Each menu is divided into sections, separated by a horizontal
line. Some menu entries correspond to modes that can be altered. A check mark appears next to a mode
that is currently active. Selecting one of these modes toggles its state. Other menu entries are
commands; selecting one of these performs the indicated function.
All of the menu entries correspond to X actions. In the list below, the menu label is shown followed by
the action's name in parenthesis.
Main Options
The xterm mainMenu pops up when the “control” key and pointer button one are pressed in a window. This
menu contains items that apply to both the VT102 and Tektronix windows. There are several sections:
Commands for managing X events:
Toolbar
Clicking on the “Toolbar” menu entry hides the toolbar if it is visible, and shows it if it
is not.
Secure Keyboard (securekbd)
The Secure Keyboard mode is helpful when typing in passwords or other sensitive data in an
unsecure environment; see SECURITY below (but read the limitations carefully).
Allow SendEvents (allowsends)
Specifies whether or not synthetic key and button events generated using the X protocol
SendEvent request should be interpreted or discarded. This corresponds to the
allowSendEvents resource.
Redraw Window (redraw)
Forces the X display to repaint; useful in some environments.
Commands for capturing output:
Log to File (logging)
Captures text sent to the screen in a logfile, as in the -l logging option.
Print-All Immediately
Invokes the print-immediate action, sending the text of the current window directly to a
file, as specified by the printFileImmediate, printModeImmediate and printOptsImmediate
resources.
Print-All on Error
Invokes the print-on-error action, which toggles a flag telling xterm that if it exits with
an X error, to send the text of the current window directly to a file, as specified by the
printFileXError, printModeXError and printOptsXError resources.
Print Window (print)
Sends the text of the current window to the program given in the printerCommand resource.
Redirect to Printer (print-redir)
This sets the printerControlMode to 0 or 2. You can use this to turn the printer on as if
an application had sent the appropriate control sequence. It is also useful for switching
the printer off if an application turns it on without resetting the print control mode.
Modes for setting keyboard style:
8-Bit Controls (8-bit-control)
Enabled for VT220 emulation, this controls whether xterm will send 8-bit control sequences
rather than using 7-bit (ASCII) controls, e.g., sending a byte in the range 128-159 rather
than the escape character followed by a second byte. Xterm always interprets both 8-bit
and 7-bit control sequences (see the document Xterm Control Sequences). This corresponds
to the eightBitControl resource.
Backarrow Key (BS/DEL) (backarrow key)
Modifies the behavior of the backarrow key, making it transmit either a backspace (8) or
delete (127) character. This corresponds to the backarrowKey resource.
Alt/NumLock Modifiers (num-lock)
Controls the treatment of Alt- and NumLock-key modifiers. This corresponds to the numLock
resource.
Meta Sends Escape (meta-esc)
Controls whether Meta keys are converted into a two-character sequence with the character
itself preceded by ESC. This corresponds to the metaSendsEscape resource.
Delete is DEL (delete-is-del)
Controls whether the Delete key on the editing keypad should send DEL (127) or the
VT220-style Remove escape sequence. This corresponds to the deleteIsDEL resource.
Old Function-Keys (oldFunctionKeys)
HP Function-Keys (hpFunctionKeys)
SCO Function-Keys (scoFunctionKeys)
Sun Function-Keys (sunFunctionKeys)
VT220 Keyboard (sunKeyboard)
These act as a radio-button, selecting one style for the keyboard layout. It corresponds
to more than one resource setting: sunKeyboard, sunFunctionKeys, scoFunctionKeys and
hpFunctionKeys ."
Commands for process signalling:
Send STOP Signal (suspend)
Send CONT Signal (continue)
Send INT Signal (interrupt)
Send HUP Signal (hangup)
Send TERM Signal (terminate)
Send KILL Signal (kill)
These send the SIGTSTP, SIGCONT, SIGINT, SIGHUP, SIGTERM and SIGKILL signals respectively,
to the process group of the process running under xterm (usually the shell). The SIGCONT
function is especially useful if the user has accidentally typed CTRL-Z, suspending the
process.
Quit (quit)
Stop processing X events except to support the -hold option, and then send a SIGHUP signal
to the the process group of the process running under xterm (usually the shell).
VT Options
The vtMenu sets various modes in the VT102 emulation, and is popped up when the “control” key and pointer
button two are pressed in the VT102 window.
VT102/VT220 Modes:
Enable Scrollbar (scrollbar)
Enable (or disable) the scrollbar. This corresponds to the -sb option and the scrollBar
resource.
Enable Jump Scroll (jumpscroll)
Enable (or disable) jump scrolling. This corresponds to the -j option and the jumpScroll
resource.
Enable Reverse Video (reversevideo)
Enable (or disable) reverse-video. This corresponds to the -rv option and the reverseVideo
resource.
Enable Auto Wraparound (autowrap)
Enable (or disable) auto-wraparound. This corresponds to the -aw option and the autoWrap
resource.
Enable Reverse Wraparound (reversewrap)
Enable (or disable) reverse wraparound. This corresponds to the -rw option and the
reverseWrap resource.
Enable Auto Linefeed (autolinefeed)
Enable (or disable) auto-linefeed. This is the VT102 NEL function, which causes the
emulator to emit a linefeed after each carriage return. There is no corresponding command-
line option or resource setting.
Enable Application Cursor Keys (appcursor)
Enable (or disable) application cursor keys. This corresponds to the appcursorDefault
resource. There is no corresponding command-line option.
Enable Application Keypad (appkeypad)
Enable (or disable) application keypad keys. This corresponds to the appkeypadDefault
resource. There is no corresponding command-line option.
Scroll to Bottom on Key Press (scrollkey)
Enable (or disable) scrolling to the bottom of the scrolling region on a keypress. This
corresponds to the -sk option and the scrollKey resource.
As a special case, the XON / XOFF keys (control/S and control/Q) are ignored.
Scroll to Bottom on Tty Output (scrollttyoutput)
Enable (or disable) scrolling to the bottom of the scrolling region on output to the
terminal. This corresponds to the -si option and the scrollTtyOutput resource.
Allow 80/132 Column Switching (allow132)
Enable (or disable) switching between 80 and 132 columns. This corresponds to the -132
option and the c132 resource.
Keep Selection (keepSelection)
Tell xterm whether to disown the selection when it stops highlighting it, e.g., when an
application modifies the display so that it no longer matches the text which has been
highlighted. As long as xterm continues to own the selection, it can provide the
corresponding text to other clients via cut/paste. This corresponds to the keepSelection
resource. There is no corresponding command-line option.
Select to Clipboard (selectToClipboard)
Tell xterm whether to use the PRIMARY or CLIPBOARD for SELECT tokens in the translations
resource which maps keyboard and mouse actions to select/paste actions. This corresponds
to the selectToClipboard resource. There is no corresponding command-line option.
Enable Visual Bell (visualbell)
Enable (or disable) visible bell (i.e., flashing) instead of an audible bell. This
corresponds to the -vb option and the visualBell resource.
Enable Bell Urgency (bellIsUrgent)
Enable (or disable) Urgency window manager hint when Control-G is received. This
corresponds to the bellIsUrgent resource.
Enable Pop on Bell (poponbell)
Enable (or disable) raising of the window when Control-G is received. This corresponds to
the -pop option and the popOnBell resource.
Enable Blinking Cursor (cursorblink)
Enable (or disable) the blinking-cursor feature. This corresponds to the -bc option and
the cursorBlink resource. There is also an escape sequence (see the document Xterm Control
Sequences). The menu entry and the escape sequence states are XOR'd: if both are enabled,
the cursor will not blink, if only one is enabled, the cursor will blink.
Enable Alternate Screen Switching (titeInhibit)
Enable (or disable) switching between the normal and alternate screens. This corresponds
to the titeInhibit resource. There is no corresponding command-line option.
Enable Active Icon (activeicon)
Enable (or disable) the active-icon feature. This corresponds to the -ai option and the
activeIcon resource.
Sixel Scrolling (sixelScrolling)
When enabled, sixel graphics are positioned at the current text cursor location, scroll the
image vertically if larger than the screen, and leave the text cursor after the image when
returning to text mode. When disabled, sixel graphics are positioned at the upper left of
the screen, are cropped to fit the screen, and do not affect the text cursor location (this
is the default). This corresponds to the sixelScrolling resource. There is no
corresponding command-line option.
Private Color Registers (privateColorRegisters)
When enabled, each graphic image uses a separate set of color registers, so that it
essentially has a private palette (this is the default). If it is not set, all graphics
images share a common set of registers which is how sixel and ReGIS graphics worked on
actual hardware. The default is likely a more useful mode on modern TrueColor hardware.
This corresponds to the privateColorRegisters resource. There is no corresponding command-
line option.
VT102/VT220 Commands:
Do Soft Reset (softreset)
Reset scroll regions. This can be convenient when some program has left the scroll regions
set incorrectly (often a problem when using VMS or TOPS-20). This corresponds to the VT220
DECSTR control sequence.
Do Full Reset (hardreset)
The full reset entry will clear the screen, reset tabs to every eight columns, and reset
the terminal modes (such as wrap and smooth scroll) to their initial states just after
xterm has finished processing the command line options. This corresponds to the VT102 RIS
control sequence, with a few obvious differences. For example, your session is not
disconnected as a real VT102 would do.
Reset and Clear Saved Lines (clearsavedlines)
Perform a full reset, and also clear the saved lines.
Commands for setting the current screen:
Show Tek Window (tekshow)
When enabled, pops the Tektronix 4014 window up (makes it visible). When disabled, hides
the Tektronix 4014 window.
Switch to Tek Mode (tekmode)
When enabled, pops the Tektronix 4014 window up if it is not already visible, and switches
the input stream to that window. When disabled, hides the Tektronix 4014 window and
switches input back to the VTxxx window.
Hide VT Window (vthide)
When enabled, hides the VTxxx window, shows the Tektronix 4014 window if it was not already
visible and switches the input stream to that window. When disabled, shows the VTxxx
window, and switches the input stream to that window.
Show Alternate Screen (altscreen)
When enabled, shows the alternate screen. When disabled, shows the normal screen. Note
that the normal screen may have saved lines; the alternate screen does not.
VT Fonts
The fontMenu pops up when when the “control” key and pointer button three are pressed in a window. It
sets the font used in the VT102 window, or modifies the way the font is specified or displayed. There
are several sections.
The first section allows you to select the font from a set of alternatives:
Default (fontdefault)
Set the font to the default, i.e., that given by the *VT100.font resource.
Unreadable (font1)
Set the font to that given by the *VT100.font1 resource.
Tiny (font2)
Set the font to that given by the *VT100.font2 resource.
Small (font3)
Set the font to that given by the *VT100.font3 resource.
Medium (font4)
Set the font to that given by the *VT100.font4 resource.
Large (font5)
Set the font to that given by the *VT100.font5 resource.
Huge (font6)
Set the font to that given by the *VT100.font6 resource.
Escape Sequence
This allows you to set the font last specified by the Set Font escape sequence (see the
document Xterm Control Sequences).
Selection (fontsel)
This allows you to set the font specified the current selection as a font name (if the
PRIMARY selection is owned).
The second section allows you to modify the way it is displayed:
Bold Fonts
This is normally checked (enabled). When unchecked, xterm will not use bold fonts. The
setting corresponds to the allowBoldFonts resource.
Line-Drawing Characters (font-linedrawing)
When set, tells xterm to draw its own line-drawing characters. Otherwise it relies on the
font containing these. Compare to the forceBoxChars resource.
Packed Font (font-packed)
When set, tells xterm to use the minimum glyph-width from a font when displaying
characters. Use the maximum width (unchecked) to help display proportional fonts. Compare
to the forcePackedFont resource.
Doublesized Characters (font-doublesize)
When set, xterm may ask the font server to produce scaled versions of the normal font, for
VT102 double-size characters.
The third section allows you to modify the way it is specified:
TrueType Fonts (render-font)
If the renderFont and corresponding resources were set, this is a further control whether
xterm will actually use the Xft library calls to obtain a font.
UTF-8 Encoding (utf8-mode)
This controls whether xterm uses UTF-8 encoding of input/output. It is useful for
temporarily switching xterm to display text from an application which does not follow the
locale settings. It corresponds to the utf8 resource.
UTF-8 Fonts (utf8-fonts)
This controls whether xterm uses UTF-8 fonts for display. It is useful for temporarily
switching xterm to display text from an application which does not follow the locale
settings. It combines the utf8 and utf8Fonts resources.
UTF-8 Titles (utf8-titles)
This controls whether xterm accepts UTF-8 encoding for title control sequences. It
corresponds to the utf8Fonts resource.
Initially the checkmark is set according to both the utf8 and utf8Fonts resource values.
If the latter is set to “always”, the checkmark is disabled. Likewise, if there are no
fonts given in the utf8Fonts subresources, then the checkmark also is disabled.
The standard XTerm app-defaults file defines both sets of fonts, while the UXTerm app-
defaults file defines only one set. assuming the standard app-defaults files, this command
will launch xterm able to switch between UTF-8 and ISO-8859-1 encoded fonts:
uxterm -class XTerm
The fourth section allows you to enable or disable special operations which can be controlled by
writing escape sequences to the terminal. These are disabled if the SendEvents feature is
enabled:
Allow Color Ops (allow-font-ops)
This corresponds to the allowColorOps resource. Enable or disable control sequences that
set/query the colors.
Allow Font Ops (allow-font-ops)
This corresponds to the allowFontOps resource. Enable or disable control sequences that
set/query the font.
Allow Tcap Ops (allow-tcap-ops)
Enable or disable control sequences that query the terminal's notion of its function-key
strings, as termcap or terminfo capabilities. This corresponds to the allowTcapOps
resource.
Allow Title Ops (allow-title-ops)
Enable or disable control sequences that modify the window title or icon name. This
corresponds to the allowTitleOps resource.
Allow Window Ops (allow-window-ops)
Enable or disable extended window control sequences (as used in dtterm). This corresponds
to the allowWindowOps resource.
TEK Options
The tekMenu sets various modes in the Tektronix emulation, and is popped up when the “control” key and
pointer button two are pressed in the Tektronix window. The current font size is checked in the modes
section of the menu.
Large Characters (tektextlarge)
#2 Size Characters (tektext2)
#3 Size Characters (tektext3)
Small Characters (tektextsmall)
Commands:
PAGE (tekpage)
Clear the Tektronix window.
RESET (tekreset)
COPY (tekcopy)
Windows:
Show VT Window (vtshow)
Switch to VT Mode (vtmode)
Hide Tek Window (tekhide)
SECURITY
X environments differ in their security consciousness.
• Most servers, run under xdm, are capable of using a “magic cookie” authorization scheme that can
provide a reasonable level of security for many people. If your server is only using a host-based
mechanism to control access to the server (see xhost(1)), then if you enable access for a host and
other users are also permitted to run clients on that same host, it is possible that someone can run
an application which uses the basic services of the X protocol to snoop on your activities,
potentially capturing a transcript of everything you type at the keyboard.
• Any process which has access to your X display can manipulate it in ways that you might not
anticipate, even redirecting your keyboard to itself and sending events to your application's
windows. This is true even with the “magic cookie” authorization scheme. While the allowSendEvents
provides some protection against rogue applications tampering with your programs, guarding against a
snooper is harder.
• The X input extension for instance allows an application to bypass all of the other (limited)
authorization and security features, including the GrabKeyboard protocol.
• The possibility of an application spying on your keystrokes is of particular concern when you want to
type in a password or other sensitive data. The best solution to this problem is to use a better
authorization mechanism than is provided by X.
Subject to all of these caveats, a simple mechanism exists for protecting keyboard input in xterm.
The xterm menu (see MENUS above) contains a Secure Keyboard entry which, when enabled, attempts to ensure
that all keyboard input is directed only to xterm (using the GrabKeyboard protocol request). When an
application prompts you for a password (or other sensitive data), you can enable Secure Keyboard using
the menu, type in the data, and then disable Secure Keyboard using the menu again.
• This ensures that you know which window is accepting your keystrokes.
• It cannot ensure that there are no processes which have access to your X display that might be
observing the keystrokes as well.
Only one X client at a time can grab the keyboard, so when you attempt to enable Secure Keyboard it may
fail. In this case, the bell will sound. If the Secure Keyboard succeeds, the foreground and background
colors will be exchanged (as if you selected the Reverse Video entry in the Modes menu); they will be
exchanged again when you exit secure mode. If the colors do not switch, then you should be very
suspicious that you are being spoofed. If the application you are running displays a prompt before
asking for the password, it is safest to enter secure mode before the prompt gets displayed, and to make
sure that the prompt gets displayed correctly (in the new colors), to minimize the probability of
spoofing. You can also bring up the menu again and make sure that a check mark appears next to the
entry.
Secure Keyboard mode will be disabled automatically if your xterm window becomes iconified (or otherwise
unmapped), or if you start up a reparenting window manager (that places a title bar or other decoration
around the window) while in Secure Keyboard mode. (This is a feature of the X protocol not easily
overcome.) When this happens, the foreground and background colors will be switched back and the bell
will sound in warning.
CHARACTER CLASSES
Clicking the left pointer button twice in rapid succession (double-clicking) causes all characters of the
same class (e.g., letters, white space, punctuation) to be selected as a “word”. Since different people
have different preferences for what should be selected (for example, should filenames be selected as a
whole or only the separate subnames), the default mapping can be overridden through the use of the
charClass (class CharClass) resource.
This resource is a series of comma-separated of range:value pairs. The range is either a single number
or low-high in the range of 0 to 65535, corresponding to the code for the character or characters to be
set. The value is arbitrary, although the default table uses the character number of the first character
occurring in the set. When not in UTF-8 mode, only the first 256 bytes of this table will be used.
The default table starts as follows -
static int charClass[256] = {
/∗ NUL SOH STX ETX EOT ENQ ACK BEL */
32, 1, 1, 1, 1, 1, 1, 1,
/∗ BS HT NL VT NP CR SO SI */
1, 32, 1, 1, 1, 1, 1, 1,
/∗ DLE DC1 DC2 DC3 DC4 NAK SYN ETB */
1, 1, 1, 1, 1, 1, 1, 1,
/∗ CAN EM SUB ESC FS GS RS US */
1, 1, 1, 1, 1, 1, 1, 1,
/∗ SP ! " # $ % & ' */
32, 33, 34, 35, 36, 37, 38, 39,
/∗ ( ) * + , - . / */
40, 41, 42, 43, 44, 45, 46, 47,
/∗ 0 1 2 3 4 5 6 7 */
48, 48, 48, 48, 48, 48, 48, 48,
/∗ 8 9 : ; < = > ? */
48, 48, 58, 59, 60, 61, 62, 63,
/∗ @ A B C D E F G */
64, 48, 48, 48, 48, 48, 48, 48,
/∗ H I J K L M N O */
48, 48, 48, 48, 48, 48, 48, 48,
/∗ P Q R S T U V W */
48, 48, 48, 48, 48, 48, 48, 48,
/∗ X Y Z [ \ ] ^ _ */
48, 48, 48, 91, 92, 93, 94, 48,
/∗ ` a b c d e f g */
96, 48, 48, 48, 48, 48, 48, 48,
/∗ h i j k l m n o */
48, 48, 48, 48, 48, 48, 48, 48,
/∗ p q r s t u v w */
48, 48, 48, 48, 48, 48, 48, 48,
/∗ x y z { | } ~ DEL */
48, 48, 48, 123, 124, 125, 126, 1,
/∗ x80 x81 x82 x83 IND NEL SSA ESA */
1, 1, 1, 1, 1, 1, 1, 1,
/∗ HTS HTJ VTS PLD PLU RI SS2 SS3 */
1, 1, 1, 1, 1, 1, 1, 1,
/∗ DCS PU1 PU2 STS CCH MW SPA EPA */
1, 1, 1, 1, 1, 1, 1, 1,
/∗ x98 x99 x9A CSI ST OSC PM APC */
1, 1, 1, 1, 1, 1, 1, 1,
/∗ - i c/ L ox Y- | So */
160, 161, 162, 163, 164, 165, 166, 167,
/∗ .. c0 ip << _ R0 - */
168, 169, 170, 171, 172, 173, 174, 175,
/∗ o +- 2 3 ' u q| . */
176, 177, 178, 179, 180, 181, 182, 183,
/∗ , 1 2 >> 1/4 1/2 3/4 ? */
184, 185, 186, 187, 188, 189, 190, 191,
/∗ A` A' A^ A~ A: Ao AE C, */
48, 48, 48, 48, 48, 48, 48, 48,
/∗ E` E' E^ E: I` I' I^ I: */
48, 48, 48, 48, 48, 48, 48, 48,
/∗ D- N~ O` O' O^ O~ O: X */
48, 48, 48, 48, 48, 48, 48, 215,
/∗ O/ U` U' U^ U: Y' P B */
48, 48, 48, 48, 48, 48, 48, 48,
/∗ a` a' a^ a~ a: ao ae c, */
48, 48, 48, 48, 48, 48, 48, 48,
/∗ e` e' e^ e: i` i' i^ i: */
48, 48, 48, 48, 48, 48, 48, 48,
/∗ d n~ o` o' o^ o~ o: -: */
48, 48, 48, 48, 48, 48, 48, 247,
/∗ o/ u` u' u^ u: y' P y: */
48, 48, 48, 48, 48, 48, 48, 48};
For example, the string “33:48,37:48,45-47:48,38:48” indicates that the exclamation mark, percent
sign, dash, period, slash, and ampersand characters should be treated the same way as characters
and numbers. This is useful for cutting and pasting electronic mailing addresses and filenames.
KEY BINDINGS
It is possible to rebind keys (or sequences of keys) to arbitrary strings for input, by changing the
translations resources for the vt100 or tek4014 widgets. Changing the translations resource for events
other than key and button events is not expected, and will cause unpredictable behavior.
ACTIONS
The following actions are provided for use within the vt100 or tek4014 translations resources:
allow-color-ops(on/off/toggle)
This action sets, unsets or toggles the allowColorOps resource and is also invoked by the allow-
color-ops entry in fontMenu.
allow-font-ops(on/off/toggle)
This action sets, unsets or toggles the allowFontOps resource and is also invoked by the allow-
font-ops entry in fontMenu.
allow-send-events(on/off/toggle)
This action sets, unsets or toggles the allowSendEvents resource and is also invoked by the
allowsends entry in mainMenu.
allow-tcap-ops(on/off/toggle)
This action sets, unsets or toggles the allowTcapOps resource and is also invoked by the allow-
tcap-ops entry in fontMenu.
allow-title-ops(on/off/toggle)
This action sets, unsets or toggles the allowTitleOps resource and is also invoked by the allow-
title-ops entry in fontMenu.
allow-window-ops(on/off/toggle)
This action sets, unsets or toggles the allowWindowOps resource and is also invoked by the allow-
window-ops entry in fontMenu.
alt-sends-escape()
This action toggles the state of the altSendsEscape resource.
bell([percent])
This action rings the keyboard bell at the specified percentage above or below the base volume.
clear-saved-lines()
This action does hard-reset() (see below) and also clears the history of lines saved off the top
of the screen. It is also invoked from the clearsavedlines entry in vtMenu. The effect is
identical to a hardware reset (RIS) control sequence.
copy-selection(destname [, ...])
This action puts the currently selected text into all of the selections or cutbuffers specified
by destname. Unlike select-end, it does not send a mouse position or otherwise modify the
internal selection state.
create-menu(m/v/f/t)
This action creates one of the menus used by xterm, if it has not been previously created. The
parameter values are the menu names: mainMenu, vtMenu, fontMenu, tekMenu, respectively.
dabbrev-expand()
Expands the word before cursor by searching in the preceding text on the screen and in the
scrollback buffer for words starting with that abbreviation. Repeating dabbrev-expand() several
times in sequence searches for an alternative expansion by looking farther back. Lack of more
matches is signaled by a beep(). Attempts to expand an empty word (i.e., when cursor is preceded
by a space) yield successively all previous words. Consecutive identical expansions are ignored.
The word here is defined as a sequence of non-whitespace characters. This feature partially
emulates the behavior of “dynamic abbreviation” expansion in Emacs (bound there to M-/). Here is
a resource setting for xterm which will do the same thing:
*VT100*translations: #override \n\
Meta <KeyPress> /:dabbrev-expand()
deiconify()
Changes the window state back to normal, if it was iconified.
delete-is-del()
This action toggles the state of the deleteIsDEL resource.
dired-button()
Handles a button event (other than press and release) by echoing the event's position (i.e.,
character line and column) in the following format:
^X ESC G <line+“ ”> <col+“ ”>
fullscreen(on/off/toggle)
This action sets, unsets or toggles the fullscreen resource.
iconify()
Iconifies the window.
hard-reset()
This action resets the scrolling region, tabs, window size, and cursor keys and clears the
screen. It is also invoked from the hardreset entry in vtMenu.
ignore()
This action ignores the event but checks for special pointer position escape sequences.
insert()
This action inserts the character or string associated with the key that was pressed.
insert-eight-bit()
This action inserts an eight-bit (Meta) version of the character or string associated with the
key that was pressed. Only single-byte values are treated specially. The exact action depends
on the value of the altSendsEscape and the metaSendsEscape and the eightBitInput resources. The
metaSendsEscape resource is tested first. See the eightBitInput resource for a full discussion.
The term “eight-bit” is misleading: xterm checks if the key is in the range 128 to 255 (the
eighth bit is set). If the value is in that range, depending on the resource values, xterm may
then do one of the following:
• add 128 to the value, setting its eighth bit,
• send an ESC byte before the key, or
• send the key unaltered.
exec-formatted(format, sourcename [, ...])
Execute an external command, using the current selection for part of the command's parameters.
The first parameter, format gives the basic command. Succeeding parameters specify the selection
source as in insert-selection.
The format parameter allows these substitutions:
%% inserts a "%".
%P the screen-position at the beginning of the highlighted region, as a semicolon-separated
pair of integers using the values that the CUP control sequence would use.
%p the screen-position after the beginning of the highlighted region, using the same convention
as “%P”.
%S the length of the string that “%s” would insert.
%s the content of the selection, unmodified.
%T the length of the string that “%t” would insert.
%t the selection, trimmed of leading/trailing whitespace, and newlines changed to single
spaces.
%V the video attributes at the beginning of the highlighted region, as a semicolon-separated
list of integers using the values that the SGR control sequence would use.
%v the video attributes after the end of the highlighted region, using the same convention as
“%V”.
After constructing the command-string, xterm forks a subprocess and executes the command, which
completes independently of xterm.
exec-selectable(format, onClicks)
Execute an external command, using data copied from the screen for part of the command's
parameters. The first parameter, format gives the basic command as in exec-formatted. The
second parameter specifies the method for copying the data as in the onClicks resource.
insert-formatted(format, sourcename [, ...])
Insert the current selection or data related to it, formatted. The first parameter, format gives
the template for the data as in exec-formatted. Succeeding parameters specify the selection
source as in insert-selection.
insert-selectable(format, onClicks)
Insert data copied from the screen, formatted. The first parameter, format gives the template
for the data as in exec-formatted. The second parameter specifies the method for copying the
data as in the onClicks resource.
insert-selection(sourcename [, ...])
This action inserts the string found in the selection or cutbuffer indicated by sourcename.
Sources are checked in the order given (case is significant) until one is found. Commonly-used
selections include: PRIMARY, SECONDARY, and CLIPBOARD. Cut buffers are typically named
CUT_BUFFER0 through CUT_BUFFER7.
insert-seven-bit()
This action is a synonym for insert() The term “seven-bit” is misleading: it only implies that
xterm does not try to add 128 to the key's value as in insert-eight-bit().
interpret(control-sequence)
Interpret the given control sequence locally, i.e., without passing it to the host. This works
by inserting the control sequence at the front of the input buffer. Use “\” to escape octal
digits in the string. Xt does not allow you to put a null character (i.e., “\000”) in the
string.
keymap(name)
This action dynamically defines a new translation table whose resource name is name with the
suffix Keymap (case is significant). The name None restores the original translation table.
larger-vt-font()
Set the font to the next larger one, based on the font dimensions. See also set-vt-font().
load-vt-fonts(name[,class])
Load fontnames from the given subresource name and class. That is, load the “*VT100.name.font”,
resource as “*VT100.font” etc. If no name is given, the original set of fontnames is restored.
Unlike set-vt-font(), this does not affect the escape- and select-fonts, since those are not
based on resource values. It does affect the fonts loosely organized under the “Default” menu
entry, including font, boldFont, wideFont and wideBoldFont.
maximize()
Resizes the window to fill the screen.
meta-sends-escape()
This action toggles the state of the metaSendsEscape resource.
popup-menu(menuname)
This action displays the specified popup menu. Valid names (case is significant) include:
mainMenu, vtMenu, fontMenu, and tekMenu.
print(printer-flags)
This action prints the window. It is also invoked by the print entry in mainMenu.
The action accepts optional parameters, which temporarily override resource settings. The
parameter values are matched ignoring case:
noFormFeed
no form feed will be sent at the end of the last line printed (i.e., printerFormFeed is
``false'').
FormFeed
a form feed will be sent at the end of the last line printed (i.e., printerFormFeed is
``true'').
noNewLine
no newline will be sent at the end of the last line printed, and wrapped lines will be
combined into long lines (i.e., printerNewLine is ``false'').
NewLine
a newline will be sent at the end of the last line printed, and each line will be limited
(by adding a newline) to the screen width (i.e., printerNewLine is ``true'').
noAttrs
the page is printed without attributes (i.e., printAttributes is ``0'').
monoAttrs
the page is printed with monochrome (vt220) attributes (i.e., printAttributes is ``1'').
colorAttrs
the page is printed with ANSI color attributes (i.e., printAttributes is ``2'').
print-everything(printer-flags)
This action sends the entire text history, in addition to the text currently visible, to the
program given in the printerCommand resource. It allows the same optional parameters as the
print action. With a suitable printer command, the action can be used to load the text history
in an editor.
print-immediate()
Sends the text of the current window directly to a file, as specified by the printFileImmediate,
printModeImmediate and printOptsImmediate resources.
print-on-error()
Toggles a flag telling xterm that if it exits with an X error, to send the text of the current
window directly to a file, as specified by the printFileXError, printModeXError and
printOptsXError resources.
print-redir()
This action toggles the printerControlMode between 0 and 2. The corresponding popup menu entry
is useful for switching the printer off if you happen to change your mind after deciding to print
random binary files on the terminal.
quit() This action sends a SIGHUP to the subprogram and exits. It is also invoked by the quit entry in
mainMenu.
readline-button()
Supports the optional readline feature by echoing repeated cursor forward or backward control
sequences on button release event, to request that the host application update its notion of the
cursor's position to match the button event.
redraw()
This action redraws the window. It is also invoked by the redraw entry in mainMenu.
restore()
Restores the window to the size before it was last maximized.
scroll-back(count [,units [,mouse] ])
This action scrolls the text window backward so that text that had previously scrolled off the
top of the screen is now visible.
The count argument indicates the number of units (which may be page, halfpage, pixel, or line) by
which to scroll.
An adjustment can be specified for these values by appending a “+” or “-” sign followed by a
number, e.g., page-2 to specify 2 lines less than a page.
If the third parameter mouse is given, the action is ignored when mouse reporting is enabled.
scroll-forw(count [,units [,mouse] ])
This action is similar to scroll-back except that it scrolls in the other direction.
secure()
This action toggles the Secure Keyboard mode described in the section named SECURITY, and is
invoked from the securekbd entry in mainMenu.
scroll-lock(on/off/toggle)
This action sets, unsets or toggles internal state which tells xterm whether Scroll Lock is
active, subject to the allowScrollLock resource.
select-cursor-end(destname [, ...])
This action is similar to select-end except that it should be used with select-cursor-start.
select-cursor-extend()
This action is similar to select-extend except that it should be used with select-cursor-start.
select-cursor-start()
This action is similar to select-start except that it begins the selection at the current text
cursor position.
select-end(destname [, ...])
This action puts the currently selected text into all of the selections or cutbuffers specified
by destname. It also sends a mouse position and updates the internal selection state to reflect
the end of the selection process.
select-extend()
This action tracks the pointer and extends the selection. It should only be bound to Motion
events.
select-set()
This action stores text that corresponds to the current selection, without affecting the
selection mode.
select-start()
This action begins text selection at the current pointer location. See the section on POINTER
USAGE for information on making selections.
send-signal(signame)
This action sends the signal named by signame to the xterm subprocess (the shell or program
specified with the -e command line option). It is also invoked by the suspend, continue,
interrupt, hangup, terminate, and kill entries in mainMenu. Allowable signal names are (case is
not significant): tstp (if supported by the operating system), suspend (same as tstp), cont (if
supported by the operating system), int, hup, term, quit, alrm, alarm (same as alrm) and kill.
set-8-bit-control(on/off/toggle)
This action sets, unsets or toggles the eightBitControl resource. It is also invoked from the
8-bit-control entry in vtMenu.
set-allow132(on/off/toggle)
This action sets, unsets or toggles the c132 resource. It is also invoked from the allow132
entry in vtMenu.
set-altscreen(on/off/toggle)
This action sets, unsets or toggles between the alternate and current screens.
set-appcursor(on/off/toggle)
This action sets, unsets or toggles the handling Application Cursor Key mode and is also invoked
by the appcursor entry in vtMenu.
set-appkeypad(on/off/toggle)
This action sets, unsets or toggles the handling of Application Keypad mode and is also invoked
by the appkeypad entry in vtMenu.
set-autolinefeed(on/off/toggle)
This action sets, unsets or toggles automatic insertion of linefeeds. It is also invoked by the
autolinefeed entry in vtMenu.
set-autowrap(on/off/toggle)
This action sets, unsets or toggles automatic wrapping of long lines. It is also invoked by the
autowrap entry in vtMenu.
set-backarrow(on/off/toggle)
This action sets, unsets or toggles the backarrowKey resource. It is also invoked from the
backarrow key entry in vtMenu.
set-bellIsUrgent(on/off/toggle)
This action sets, unsets or toggles the bellIsUrgent resource. It is also invoked by the
bellIsUrgent entry in vtMenu.
set-cursorblink(on/off/toggle)
This action sets, unsets or toggles the cursorBlink resource. It is also invoked from the
cursorblink entry in vtMenu.
set-cursesemul(on/off/toggle)
This action sets, unsets or toggles the curses resource. It is also invoked from the cursesemul
entry in vtMenu.
set-font-doublesize(on/off/toggle)
This action sets, unsets or toggles the fontDoublesize resource. It is also invoked by the font-
doublesize entry in fontMenu.
set-hp-function-keys(on/off/toggle)
This action sets, unsets or toggles the hpFunctionKeys resource. It is also invoked by the
hpFunctionKeys entry in mainMenu.
set-jumpscroll(on/off/toggle)
This action sets, unsets or toggles the jumpscroll resource. It is also invoked by the
jumpscroll entry in vtMenu.
set-font-linedrawing(on/off/toggle)
This action sets, unsets or toggles the xterm's state regarding whether the current font has
line-drawing characters and whether it should draw them directly. It is also invoked by the
font-linedrawing entry in fontMenu.
set-font-packed(on/off/toggle)
This action sets, unsets or toggles the forcePackedFont's resource which controls use of the
font's minimum or maximum glyph width. It is also invoked by the font-packed entry in fontMenu.
set-keep-selection(on/off/toggle)
This action sets, unsets or toggles the keepSelection resource. It is also invoked by the
keepSelection entry in vtMenu.
set-logging(on/off/toggle)
This action sets, unsets or toggles the state of the logging option.
set-old-function-keys(on/off/toggle)
This action sets, unsets or toggles the state of legacy function keys. It is also invoked by the
oldFunctionKeys entry in mainMenu.
set-marginbell(on/off/toggle)
This action sets, unsets or toggles the marginBell resource.
set-num-lock(on/off/toggle)
This action toggles the state of the numLock resource.
set-pop-on-bell(on/off/toggle)
This action sets, unsets or toggles the popOnBell resource. It is also invoked by the poponbell
entry in vtMenu.
set-private-colors(on/off/toggle)
This action sets, unsets or toggles the privateColorRegisters resource.
set-render-font(on/off/toggle)
This action sets, unsets or toggles the renderFont resource. It is also invoked by the render-
font entry in fontMenu.
set-reverse-video(on/off/toggle)
This action sets, unsets or toggles the reverseVideo resource. It is also invoked by the
reversevideo entry in vtMenu.
set-reversewrap(on/off/toggle)
This action sets, unsets or toggles the reverseWrap resource. It is also invoked by the
reversewrap entry in vtMenu.
set-scroll-on-key(on/off/toggle)
This action sets, unsets or toggles the scrollKey resource. It is also invoked from the
scrollkey entry in vtMenu.
set-scroll-on-tty-output(on/off/toggle)
This action sets, unsets or toggles the scrollTtyOutput resource. It is also invoked from the
scrollttyoutput entry in vtMenu.
set-scrollbar(on/off/toggle)
This action sets, unsets or toggles the scrollbar resource. It is also invoked by the scrollbar
entry in vtMenu.
set-sco-function-keys(on/off/toggle)
This action sets, unsets or toggles the scoFunctionKeys resource. It is also invoked by the
scoFunctionKeys entry in mainMenu.
set-select(on/off/toggle)
This action sets, unsets or toggles the selectToClipboard resource. It is also invoked by the
selectToClipboard entry in vtMenu.
set-sixel-scrolling(on/off/toggle)
This action toggles between inline (sixel scrolling) and absolute positioning. It can also be
controlled via DEC private mode 80 (DECSDM) or from the sixelScrolling entry in the btMenu.
set-sun-function-keys(on/off/toggle)
This action sets, unsets or toggles the sunFunctionKeys resource. It is also invoked by the
sunFunctionKeys entry in mainMenu.
set-sun-keyboard(on/off/toggle)
This action sets, unsets or toggles the sunKeyboard resource. It is also invoked by the
sunKeyboard entry in mainMenu.
set-tek-text(large/2/3/small)
This action sets the font used in the Tektronix window to the value of the selected resource
according to the argument. The argument can be either a keyword or single-letter alias, as shown
in parentheses:
large (l)
Use resource fontLarge, same as menu entry tektextlarge.
two (2)
Use resource font2, same as menu entry tektext2.
three (3)
Use resource font3, same as menu entry tektext3.
small (s)
Use resource fontSmall, same as menu entry tektextsmall.
set-terminal-type(type)
This action directs output to either the vt or tek windows, according to the type string. It is
also invoked by the tekmode entry in vtMenu and the vtmode entry in tekMenu.
set-titeInhibit(on/off/toggle)
This action sets, unsets or toggles the titeInhibit resource, which controls switching between
the alternate and current screens.
set-toolbar(on/off/toggle)
This action sets, unsets or toggles the toolbar feature. It is also invoked by the toolbar entry
in mainMenu.
set-utf8-mode(on/off/toggle)
This action sets, unsets or toggles the utf8 resource. It is also invoked by the utf8-mode entry
in fontMenu.
set-utf8-title(on/off/toggle)
This action sets, unsets or toggles the utf8Title resource. It is also invoked by the utf8-title
entry in fontMenu.
set-visibility(vt/tek,on/off/toggle)
This action sets, unsets or toggles whether or not the vt or tek windows are visible. It is also
invoked from the tekshow and vthide entries in vtMenu and the vtshow and tekhide entries in
tekMenu.
set-visual-bell(on/off/toggle)
This action sets, unsets or toggles the visualBell resource. It is also invoked by the
visualbell entry in vtMenu.
set-vt-font(d/1/2/3/4/5/6/e/s [,normalfont [, boldfont]])
This action sets the font or fonts currently being used in the VT102 window. The first argument
is a single character that specifies the font to be used:
d or D indicate the default font (the font initially used when xterm was started),
1 through 6 indicate the fonts specified by the font1 through font6 resources,
e or E indicate the normal and bold fonts that have been set through escape codes (or specified
as the second and third action arguments, respectively), and
s or S indicate the font selection (as made by programs such as xfontsel(1)) indicated by the
second action argument.
If xterm is configured to support wide characters, an additional two optional parameters are
recognized for the e argument: wide font and wide bold font.
smaller-vt-font()
Set the font to the next smaller one, based on the font dimensions. See also set-vt-font().
soft-reset()
This action resets the scrolling region. It is also invoked from the softreset entry in vtMenu.
The effect is identical to a soft reset (DECSTR) control sequence.
spawn-new-terminal(params)
Spawn a new xterm process. This is available on systems which have a modern version of the
process filesystem, e.g., “/proc”, which xterm can read.
Use the “cwd” process entry, e.g., /proc/12345/cwd to obtain the working directory of the process
which is running in the current xterm.
On systems which have the “exe” process entry, e.g., /proc/12345/exe, use this to obtain the
actual executable. Otherwise, use the $PATH variable to find xterm.
If parameters are given in the action, pass them to the new xterm process.
start-extend()
This action is similar to select-start except that the selection is extended to the current
pointer location.
start-cursor-extend()
This action is similar to select-extend except that the selection is extended to the current text
cursor position.
string(string)
This action inserts the specified text string as if it had been typed. Quotation is necessary if
the string contains whitespace or non-alphanumeric characters. If the string argument begins
with the characters “0x”, it is interpreted as a hex character constant.
tek-copy()
This action copies the escape codes used to generate the current window contents to a file in the
current directory beginning with the name COPY. It is also invoked from the tekcopy entry in
tekMenu.
tek-page()
This action clears the Tektronix window. It is also invoked by the tekpage entry in tekMenu.
tek-reset()
This action resets the Tektronix window. It is also invoked by the tekreset entry in tekMenu.
vi-button()
Handles a button event (other than press and release) by echoing a control sequence computed from
the event's line number in the screen relative to the current line:
ESC ^P
or
ESC ^N
according to whether the event is before, or after the current line, respectively. The ^N (or
^P) is repeated once for each line that the event differs from the current line. The control
sequence is omitted altogether if the button event is on the current line.
visual-bell()
This action flashes the window quickly.
The Tektronix window also has the following action:
gin-press(l/L/m/M/r/R)
This action sends the indicated graphics input code.
DEFAULT KEY BINDINGS
The default bindings in the VT102 window use the SELECT token, which is set by the selectToClipboard
resource:
Shift <KeyPress> Prior:scroll-back(1,halfpage) \n\
Shift <KeyPress> Next:scroll-forw(1,halfpage) \n\
Shift <KeyPress> Select:select-cursor-start() \
select-cursor-end(SELECT, CUT_BUFFER0) \n\
Shift <KeyPress> Insert:insert-selection(SELECT, CUT_BUFFER0) \n\
Alt <Key>Return:fullscreen() \n\
<KeyRelease> Scroll_Lock:scroll-lock() \n\
Shift~Ctrl <KeyPress> KP_Add:larger-vt-font() \n\
Shift Ctrl <KeyPress> KP_Add:smaller-vt-font() \n\
Shift <KeyPress> KP_Subtract:smaller-vt-font() \n\
~Meta <KeyPress>:insert-seven-bit() \n\
Meta <KeyPress>:insert-eight-bit() \n\
!Ctrl <Btn1Down>:popup-menu(mainMenu) \n\
!Lock Ctrl <Btn1Down>:popup-menu(mainMenu) \n\
!Lock Ctrl @Num_Lock <Btn1Down>:popup-menu(mainMenu) \n\
! @Num_Lock Ctrl <Btn1Down>:popup-menu(mainMenu) \n\
~Meta <Btn1Down>:select-start() \n\
~Meta <Btn1Motion>:select-extend() \n\
!Ctrl <Btn2Down>:popup-menu(vtMenu) \n\
!Lock Ctrl <Btn2Down>:popup-menu(vtMenu) \n\
!Lock Ctrl @Num_Lock <Btn2Down>:popup-menu(vtMenu) \n\
! @Num_Lock Ctrl <Btn2Down>:popup-menu(vtMenu) \n\
~Ctrl ~Meta <Btn2Down>:ignore() \n\
Meta <Btn2Down>:clear-saved-lines() \n\
~Ctrl ~Meta <Btn2Up>:insert-selection(SELECT, CUT_BUFFER0) \n\
!Ctrl <Btn3Down>:popup-menu(fontMenu) \n\
!Lock Ctrl <Btn3Down>:popup-menu(fontMenu) \n\
!Lock Ctrl @Num_Lock <Btn3Down>:popup-menu(fontMenu) \n\
! @Num_Lock Ctrl <Btn3Down>:popup-menu(fontMenu) \n\
~Ctrl ~Meta <Btn3Down>:start-extend() \n\
~Meta <Btn3Motion>:select-extend() \n\
Ctrl <Btn4Down>:scroll-back(1,halfpage,m) \n\
Lock Ctrl <Btn4Down>:scroll-back(1,halfpage,m) \n\
Lock @Num_Lock Ctrl <Btn4Down>:scroll-back(1,halfpage,m) \n\
@Num_Lock Ctrl <Btn4Down>:scroll-back(1,halfpage,m) \n\
<Btn4Down>:scroll-back(5,line,m) \n\
Ctrl <Btn5Down>:scroll-forw(1,halfpage,m) \n\
Lock Ctrl <Btn5Down>:scroll-forw(1,halfpage,m) \n\
Lock @Num_Lock Ctrl <Btn5Down>:scroll-forw(1,halfpage,m) \n\
@Num_Lock Ctrl <Btn5Down>:scroll-forw(1,halfpage,m) \n\
<Btn5Down>:scroll-forw(5,line,m) \n\
<BtnUp>:select-end(SELECT, CUT_BUFFER0) \n\
<BtnDown>:ignore()
The default bindings for the scrollbar widget are separate from the VT100 widget:
<Btn5Down>: StartScroll(Forward) \n\
<Btn1Down>: StartScroll(Forward) \n\
<Btn2Down>: StartScroll(Continuous) MoveThumb() NotifyThumb() \n\
<Btn3Down>: StartScroll(Backward) \n\
<Btn4Down>: StartScroll(Backward) \n\
<Btn2Motion>: MoveThumb() NotifyThumb() \n\
<BtnUp>: NotifyScroll(Proportional) EndScroll()
The default bindings in the Tektronix window are:
~Meta<KeyPress>: insert-seven-bit() \n\
Meta<KeyPress>: insert-eight-bit() \n\
!Ctrl <Btn1Down>: popup-menu(mainMenu) \n\
!Lock Ctrl <Btn1Down>: popup-menu(mainMenu) \n\
!Lock Ctrl @Num_Lock <Btn1Down>: popup-menu(mainMenu) \n\
!Ctrl @Num_Lock <Btn1Down>: popup-menu(mainMenu) \n\
!Ctrl <Btn2Down>: popup-menu(tekMenu) \n\
!Lock Ctrl <Btn2Down>: popup-menu(tekMenu) \n\
!Lock Ctrl @Num_Lock <Btn2Down>: popup-menu(tekMenu) \n\
!Ctrl @Num_Lock <Btn2Down>: popup-menu(tekMenu) \n\
Shift ~Meta<Btn1Down>: gin-press(L) \n\
~Meta<Btn1Down>: gin-press(l) \n\
Shift ~Meta<Btn2Down>: gin-press(M) \n\
~Meta<Btn2Down>: gin-press(m) \n\
Shift ~Meta<Btn3Down>: gin-press(R) \n\
~Meta<Btn3Down>: gin-press(r)
Here is an example which uses shifted select/paste to copy to the clipboard, and unshifted select/paste
for the primary selection. In each case, a (different) cut buffer is also a target or source of the
select/paste operation. It is important to remember however, that cut buffers store data in ISO-8859-1
encoding, while selections can store data in a variety of formats and encodings. While xterm owns the
selection, it highlights it. When it loses the selection, it removes the corresponding highlight. But
you can still paste from the corresponding cut buffer.
*VT100*translations: #override \n\
~Shift~Ctrl<Btn2Up>: insert-selection(PRIMARY, CUT_BUFFER0) \n\
Shift~Ctrl<Btn2Up>: insert-selection(CLIPBOARD, CUT_BUFFER1) \n\
~Shift<BtnUp>: select-end(PRIMARY, CUT_BUFFER0) \n\
Shift<BtnUp>: select-end(CLIPBOARD, CUT_BUFFER1)
Below is a sample of how the keymap() action is used to add special keys for entering commonly-typed
works:
*VT100.Translations: #override <Key>F13: keymap(dbx)
*VT100.dbxKeymap.translations: \
<Key>F14: keymap(None) \n\
<Key>F17: string("next") string(0x0d) \n\
<Key>F18: string("step") string(0x0d) \n\
<Key>F19: string("continue") string(0x0d) \n\
<Key>F20: string("print ") insert-selection(PRIMARY, CUT_BUFFER0)
Some people prefer using the left pointer button for dragging the scrollbar thumb. That can be setup by
altering the translations resource, e.g.,
*VT100.scrollbar.translations: #override \n\
<Btn5Down>: StartScroll(Forward) \n\
<Btn1Down>: StartScroll(Continuous) MoveThumb() NotifyThumb() \n\
<Btn4Down>: StartScroll(Backward) \n\
<Btn1Motion>: MoveThumb() NotifyThumb() \n\
<BtnUp>: NotifyScroll(Proportional) EndScroll()
CONTROL SEQUENCES AND KEYBOARD
The Xterm Control Sequences document lists the control sequences which an application can send xterm to
make it perform various operations. Most of these operations are standardized, from either the DEC or
Tektronix terminals, or from more widely used standards such as ISO-6429.
ENVIRONMENT
Xterm sets several environment variables:
DISPLAY
is the display name, pointing to the X server (see DISPLAY NAMES in X(7)).
TERM is set according to the termcap (or terminfo) entry which it is using as a reference.
WINDOWID
is set to the X window id number of the xterm window.
XTERM_FILTER
is set if a locale-filter is used. The value is the pathname of the filter.
XTERM_LOCALE
shows the locale which was used by xterm on startup. Some shell initialization scripts may set a
different locale.
XTERM_SHELL
is set to the pathname of the program which is invoked. Usually that is a shell program, e.g.,
/bin/sh. Since it is not necessarily a shell program however, it is distinct from “SHELL”.
XTERM_VERSION
is set to the string displayed by the -version option. That is normally an identifier for the X
Window libraries used to build xterm, followed by xterm's patch number in parenthesis. The patch
number is also part of the response to a Secondary Device Attributes (DA) control sequence (see
Xterm Control Sequences).
Depending on your system configuration, xterm may also set the following:
COLUMNS
the width of the xterm in characters (cf: “stty columns”).
HOME when xterm is configured to update utmp.
LINES
the height of the xterm in characters (cf: “stty rows”).
LOGNAME
when xterm is configured to update utmp.
SHELL
when xterm is configured to update utmp. It is also set if you provide the shell name as the
optional parameter.
TERMCAP
the contents of the termcap entry corresponding to $TERM, with lines and columns values substituted
for the actual size window you have created.
TERMINFO
may be defined to a nonstandard location in the configure script.
FILES
The actual pathnames given may differ on your system.
/var/run/utmp
the system logfile, which records user logins.
/var/log/wtmp
the system logfile, which records user logins and logouts.
/etc/X11/app-defaults/XTerm
the xterm default application resources.
/etc/X11/app-defaults/XTerm-color
the xterm color application resources. If your display supports color, use this
*customization: -color
in your .Xdefaults file to automatically use this resource file rather than /etc/X11/app-
defaults/XTerm. If you do not do this, xterm uses its compiled-in default resource settings for
colors.
/usr/share/pixmaps
the directory in which xterm's pixmap icon files are installed.
ERROR MESSAGES
Most of the fatal error messages from xterm use the following format:
xterm: Error XXX, errno YYY: ZZZ
The XXX codes (which are used by xterm as its exit-code) are listed below, with a brief explanation.
1 is used for miscellaneous errors, usually accompanied by a specific message,
11 ERROR_FIONBIO
main: ioctl() failed on FIONBIO
12 ERROR_F_GETFL
main: ioctl() failed on F_GETFL
13 ERROR_F_SETFL
main: ioctl() failed on F_SETFL
14 ERROR_OPDEVTTY
spawn: open() failed on /dev/tty
15 ERROR_TIOCGETP
spawn: ioctl() failed on TIOCGETP
17 ERROR_PTSNAME
spawn: ptsname() failed
18 ERROR_OPPTSNAME
spawn: open() failed on ptsname
19 ERROR_PTEM
spawn: ioctl() failed on I_PUSH/"ptem"
20 ERROR_CONSEM
spawn: ioctl() failed on I_PUSH/"consem"
21 ERROR_LDTERM
spawn: ioctl() failed on I_PUSH/"ldterm"
22 ERROR_TTCOMPAT
spawn: ioctl() failed on I_PUSH/"ttcompat"
23 ERROR_TIOCSETP
spawn: ioctl() failed on TIOCSETP
24 ERROR_TIOCSETC
spawn: ioctl() failed on TIOCSETC
25 ERROR_TIOCSETD
spawn: ioctl() failed on TIOCSETD
26 ERROR_TIOCSLTC
spawn: ioctl() failed on TIOCSLTC
27 ERROR_TIOCLSET
spawn: ioctl() failed on TIOCLSET
28 ERROR_INIGROUPS
spawn: initgroups() failed
29 ERROR_FORK
spawn: fork() failed
30 ERROR_EXEC
spawn: exec() failed
32 ERROR_PTYS
get_pty: not enough ptys
34 ERROR_PTY_EXEC
waiting for initial map
35 ERROR_SETUID
spawn: setuid() failed
36 ERROR_INIT
spawn: can't initialize window
46 ERROR_TIOCKSET
spawn: ioctl() failed on TIOCKSET
47 ERROR_TIOCKSETC
spawn: ioctl() failed on TIOCKSETC
49 ERROR_LUMALLOC
luit: command-line malloc failed
50 ERROR_SELECT
in_put: select() failed
54 ERROR_VINIT
VTInit: can't initialize window
57 ERROR_KMMALLOC1
HandleKeymapChange: malloc failed
60 ERROR_TSELECT
Tinput: select() failed
64 ERROR_TINIT
TekInit: can't initialize window
71 ERROR_BMALLOC2
SaltTextAway: malloc() failed
80 ERROR_LOGEXEC
StartLog: exec() failed
83 ERROR_XERROR
xerror: XError event
84 ERROR_XIOERROR
xioerror: X I/O error
85 ERROR_ICEERROR
ICE I/O error
90 ERROR_SCALLOC
Alloc: calloc() failed on base
91 ERROR_SCALLOC2
Alloc: calloc() failed on rows
102 ERROR_SAVE_PTR
ScrnPointers: malloc/realloc() failed
BUGS
Large pastes do not work on some systems. This is not a bug in xterm; it is a bug in the pseudo terminal
driver of those systems. xterm feeds large pastes to the pty only as fast as the pty will accept data,
but some pty drivers do not return enough information to know if the write has succeeded.
When connected to an input method, it is possible for xterm to hang if the XIM server is suspended or
killed.
Many of the options are not resettable after xterm starts.
This program still needs to be rewritten. It should be split into very modular sections, with the
various emulators being completely separate widgets that do not know about each other. Ideally, you'd
like to be able to pick and choose emulator widgets and stick them into a single control widget.
There needs to be a dialog box to allow entry of the Tek COPY file name.
SEE ALSO
resize(1), luit(1), uxterm(1), X(7), pty(4), tty(4)
Xterm Control Sequences (this is the file ctlseqs.ms).
http://invisible-island.net/xterm/xterm.html
http://invisible-island.net/xterm/ctlseqs/ctlseqs.html
AUTHORS
Far too many people, including:
Loretta Guarino Reid (DEC-UEG-WSL), Joel McCormack (DEC-UEG-WSL), Terry Weissman (DEC-UEG-WSL), Edward
Moy (Berkeley), Ralph R. Swick (MIT-Athena), Mark Vandevoorde (MIT-Athena), Bob McNamara (DEC-MAD), Jim
Gettys (MIT-Athena), Bob Scheifler (MIT X Consortium), Doug Mink (SAO), Steve Pitschke (Stellar), Ron
Newman (MIT-Athena), Jim Fulton (MIT X Consortium), Dave Serisky (HP), Jonathan Kamens (MIT-Athena),
Jason Bacon, Stephen P. Wall, David Wexelblat, and Thomas Dickey (invisible-island.net).
Patch #297 2013-09-10 XTERM(1)