Ubuntu Manpage: e2fsck.conf - Configuration file for e2fsck

Provided by: e2fsprogs_1.42.9-3ubuntu1.3_amd64

NAME

       e2fsck.conf - Configuration file for e2fsck

DESCRIPTION

       e2fsck.conf  is the configuration file for e2fsck(8).  It controls the default behavior of
       e2fsck(8) while it is checking ext2, ext3, or ext4 filesystems.

       The e2fsck.conf file uses an  INI-style  format.   Stanzas,  or  top-level  sections,  are
       delimited by square braces: [ ].  Within each section, each line defines a relation, which
       assigns tags  to  values,  or  to  a  subsection,  which  contains  further  relations  or
       subsections.   An  example of the INI-style format used by this configuration file follows
       below:

            [section1]
                 tag1 = value_a
                 tag1 = value_b
                 tag2 = value_c

            [section 2]
                 tag3 = {
                      subtag1 = subtag_value_a
                      subtag1 = subtag_value_b
                      subtag2 = subtag_value_c
                 }
                 tag1 = value_d
                 tag2 = value_e
            }

       Comments are delimited by a semicolon (';') or a hash ('#') character at the beginning  of
       the comment, and are terminated by the end of line character.

       Tags  and  values  must  be  quoted  using double quotes if they contain spaces.  Within a
       quoted string, the  standard  backslash  interpretations  apply:  "\n"  (for  the  newline
       character),  "\t"  (for  the  tab character), "\b" (for the backspace character), and "\\"
       (for the backslash character).

       The following stanzas are used in the e2fsck.conf file.  They will be  described  in  more
       detail in future sections of this document.

       [options]
              This stanza contains general configuration parameters for e2fsck's behavior.

       [problems]
              This  stanza  allows  the  administrator  to reconfigure how e2fsck handles various
              filesystem inconsistencies.

       [scratch_files]
              This stanza controls when e2fsck will attempt to use scratch files  to  reduce  the
              need for memory.

THE [options] STANZA

The following relations are defined in the [options] stanza.

allow_cancellation
If this relation is set to a boolean value of true, then if the user interrupts
e2fsck using ^C, and the filesystem is not explicitly flagged as containing errors,
e2fsck will exit with an exit status of 0 instead of 32. This setting defaults to
false.

accept_time_fudge
Unfortunately, due to Windows' unfortunate design decision to configure the
hardware clock to tick localtime, instead of the more proper and less error-prone
UTC time, many users end up in the situation where the system clock is incorrectly
set at the time when e2fsck is run.

Historically this was usually due to some distributions having buggy init scripts
and/or installers that didn't correctly detect this case and take appropriate
countermeasures. Unfortunately, this is occasionally true even today, usually due
to a buggy or misconfigured virtualization manager or the installer not having
access to a network time server during the installation process. So by default, we
allow the superblock times to be fudged by up to 24 hours. This can be disabled by
setting accept_time_fudge to the boolean value of false. This setting defaults to
true.

broken_system_clock
The e2fsck(8) program has some heuristics that assume that the system clock is
correct. In addition, many system programs make similar assumptions. For example,
the UUID library depends on time not going backwards in order for it to be able to
make its guarantees about issuing universally unique ID's. Systems with broken
system clocks, are well, broken. However, broken system clocks, particularly in
embedded systems, do exist. E2fsck will attempt to use heuristics to determine if
the time can not be trusted; and to skip time-based checks if this is true. If
this boolean is set to true, then e2fsck will always assume that the system clock
can not be trusted.

buggy_init_scripts
This boolean relation is an alias for accept_time_fudge for backwards
compatibility; it used to be that the behavior defined by accept_time_fudge above
defaulted to false, and buggy_init_scripts would enable superblock time field to be
wrong by up to 24 hours. When we changed the default, we also renamed this boolean
relation to accept_time_fudge.

clear_test_fs_flag
This boolean relation controls whether or not e2fsck(8) will offer to clear the
test_fs flag if the ext4 filesystem is available on the system. It defaults to
true.

defer_check_on_battery
This boolean relation controls whether or not the interval between filesystem
checks (either based on time or number of mounts) should be doubled if the system
is running on battery. This setting defaults to true.

indexed_dir_slack_percentage
When e2fsck(8) repacks a indexed directory, reserve the specified percentage of
empty space in each leaf nodes so that a few new entries can be added to the
directory without splitting leaf nodes, so that the average fill ratio of
directories can be maintained at a higher, more efficient level. This relation
defaults to 20 percent.

log_dir
If the log_filename relation contains a relative pathname, then the log file will
be placed in the directory named by the log_dir relation.

log_dir_fallback
This relation contains an alternate directory that will be used if the directory
specified by log_dir is not available or is not writeable.

log_dir_wait
If this boolean relation is true, them if the directories specified by log_dir or
log_dir_fallback are not available or are not yet writeable, e2fsck will save the
output in a memory buffer, and a child process will periodically test to see if the
log directory has become available after the boot sequence has mounted the requiste
filesytem for reading/writing. This implements the functionality provided by
logsave(8) for e2fsck log files.

log_filename
This relation specifies the file name where a copy of e2fsck's output will be
written. If certain problem reports are suppressed using the max_count_problems
relation, (or on a per-problem basis using the max_count relation), the full set of
problem reports will be written to the log file. The filename may contain various
percent-expressions (%D, %T, %N, etc.) which will be expanded so that the file name
for the log file can include things like date, time, device name, and other run-
time parameters. See the LOGGING section for more details.

max_count_problems
This relation specifies the maximum number of problem reports of a particular type
will be printed to stdout before further problem reports of that type are
squelched. This can be useful if the console is slow (i.e., connected to a serial
port) and so a large amount of output could end up delaying the boot process for a
long time (potentially hours).

report_features
If this boolean relation is true, e2fsck will print the file system features as
part of its verbose reporting (i.e., if the -v option is specified)

report_time
If this boolean relation is true, e2fsck will run as if the options -tt are always
specified. This will cause e2fsck to print timing statistics on a pass by pass
basis for full file system checks.

report_verbose
If this boolean relation is true, e2fsck will run as if the option -v is always
specified. This will cause e2fsck to print some additional information at the end
of each full file system check.

THE [problems] STANZA

Each tag in the [problems] stanza names a problem code specified with a leading "0x"
followed by six hex digits. The value of the tag is a subsection where the relations in
that subsection override the default treatment of that particular problem code.

Note that inappropriate settings in this stanza may cause e2fsck to behave incorrectly, or
even crash. Most system administrators should not be making changes to this section
without referring to source code.

Within each problem code's subsection, the following tags may be used:

description
This relation allows the message which is printed when this filesystem
inconsistency is detected to be overridden.

preen_ok
This boolean relation overrides the default behavior controlling whether this
filesystem problem should be automatically fixed when e2fsck is running in preen
mode.

max_count
This integer relation overrides the max_count_problems parameter (set in the
options section) for this particular problem.

no_ok This boolean relation overrides the default behavior determining whether or not the
filesystem will be marked as inconsistent if the user declines to fix the reported
problem.

no_default
This boolean relation overrides whether the default answer for this problem (or
question) should be "no".

preen_nomessage
This boolean relation overrides the default behavior controlling whether or not the
description for this filesystem problem should be suppressed when e2fsck is running
in preen mode.

no_nomsg
This boolean relation overrides the default behavior controlling whether or not the
description for this filesystem problem should be suppressed when a problem forced
not to be fixed, either because e2fsck is run with the -n option or because the
force_no flag has been set for the problem.

force_no
This boolean option, if set to true, forces a problem to never be fixed. That is,
it will be as if the user problem responds 'no' to the question of 'should this
problem be fixed?'. The force_no option even overrides the -y option given on the
command-line (just for the specific problem, of course).

THE [scratch_files] STANZA

       The following relations are defined in the [scratch_files] stanza.

       directory
              If  the  directory named by this relation exists and is writeable, then e2fsck will
              attempt to use this directory to store scratch files  instead  of  using  in-memory
              data structures.

       numdirs_threshold
              If  this  relation  is set, then in-memory data structures be used if the number of
              directories in the filesystem are fewer than amount specified.

       dirinfo
              This relation controls whether or not the scratch file directory is used instead of
              an in-memory data structure for directory information.  It defaults to true.

       icount This relation controls whether or not the scratch file directory is used instead of
              an in-memory data structure when tracking inode counts.  It defaults to true.

LOGGING

E2fsck has the facility to save the information from an e2fsck run in a directory so that
a system administrator can review its output at their leisure. This allows information
captured during the automatic e2fsck preen run, as well as a manually started e2fsck run,
to be saved for posterity. This facility is controlled by the log_filename, log_dir,
log_dir_fallback, and log_dir_wait relations in the [options] stanza.

The filename in log_filename may contain the following percent-expressions that will be
expanded as follows.

%d The current day of the month

%D The current date; this is a equivalent of %Y%m%d

%h The hostname of the system.

%H The current hour in 24-hour format (00..23)

%m The current month as a two-digit number (01..12)

%M The current minute (00..59)

%N The name of the block device containing the file system, with any directory
pathname stripped off.

%p The pid of the e2fsck process

%s The current time expressed as the number of seconds since 1970-01-01 00:00:00 UTC

%S The current second (00..59)

%T The current time; this is equivalent of %H%M%S

%u The name of the user running e2fsck.

%U This percent expression does not expand to anything, but it signals that any
following date or time expressions should be expressed in UTC time instead of the
local timzeone.

%y The last two digits of the current year (00..99)

%Y The current year (i.e., 2012).

EXAMPLES

       The following recipe will prevent e2fsck from aborting during  the  boot  process  when  a
       filesystem  contains  orphaned  files.   (Of course, this is not always a good idea, since
       critical files that are needed for the security of the system could potentially end up  in
       lost+found,  and  starting  the  system  without first having a system administrator check
       things out may be dangerous.)

            [problems]
                 0x040002 = {
                      preen_ok = true
                      description = "@u @i %i.  "
                 }

       The following recipe will  cause  an  e2fsck  logfile  to  be  written  to  the  directory
       /var/log/e2fsck,  with  a  filename  that  contains  the  device name, the hostname of the
       system, the date,  and  time:  e.g.,  "e2fsck-sda3.server.INFO.20120314-112142".   If  the
       directory  containing  /var/log  is  located  on  the  root file system which is initially
       mounted read-only, then the output will be saved in memory and written out once  the  root
       file  system  has been remounted read/write.   To avoid too much detail from being written
       to the serial console (which could potentially slow down the boot sequence), only print no
       more than 16 instances of each type of file system corruption.

            [options]
                 max_count_problems = 16
                 log_dir = /var/log/e2fsck
                 log_filename = e2fsck-%N.%h.INFO.%D-%T
                 log_dir_wait = true

FILES

       /etc/e2fsck.conf
              The configuration file for e2fsck(8).