Provided by: nut-server_2.7.1-1ubuntu1.2_amd64 bug

NAME

       ups.conf - UPS definitions for Network UPS Tools

DESCRIPTION

       This file is read by the driver controller upsdrvctl(8), the UPS drivers that use the
       common core (see nutupsdrv(8), and upsd(8)). The file begins with global directives, and
       then each UPS has a section which contains a number of directives that set parameters for
       that UPS.

       A UPS section begins with the name of the UPS in brackets, and continues until the next
       UPS name in brackets or until EOF. The name "default" is used internally in upsd, so you
       can’t use it in this file.

       You must define the driver and port elements for each entry. Anything after that in a
       section is optional. A simple example might look like this:

           [myups]
                   driver = blazer_ser
                   port = /dev/ttyS0
                   desc = "Web server UPS"

       A slightly more complicated version includes some extras for the hardware-specific part of
       the driver:

           [bigups]
                   driver = apcsmart
                   port = /dev/cua00
                   cable = 940-0095B
                   sdtype = 2
                   desc = "Database server UPS"

       In this case, the apcsmart(8) driver will receive variables called "cable" and "sdtype"
       which have special meanings. See the man pages of your driver(s) to learn which variables
       are supported and what they do.

GLOBAL DIRECTIVES

       chroot
           Optional. The driver will chroot(2) to this directory during initialization. This can
           be useful when securing systems.

       driverpath
           Optional. Path name of the directory in which the UPS driver executables reside. If
           you don’t specify this, the programs look in a built-in default directory, which is
           often /usr/local/ups/bin.

       maxstartdelay
           Optional. Same as the UPS field of the same name, but this is the default for UPSes
           that don’t have the field.

       pollinterval
           Optional. The status of the UPS will be refreshed after a maximum delay which is
           controlled by this setting. This is normally 2 seconds. This may be useful if the
           driver is creating too much of a load on your system or network.

       user
           Optional. If started as root, the driver will setuid(2) to the user id associated with
           username.

UPS FIELDS

       driver
           Required. This specifies which program will be monitoring this UPS. You need to
           specify the one that is compatible with your hardware. See nutupsdrv(8) for more
           information on drivers in general and pointers to the man pages of specific drivers.

       port
           Required. This is the serial port where the UPS is connected. On a Linux system, the
           first serial port usually is /dev/ttyS0. On FreeBSD and similar systems, it probably
           will be /dev/cuaa0.

       sdorder
           Optional. When you have multiple UPSes on your system, you usually need to turn them
           off in a certain order. upsdrvctl shuts down all the 0s, then the 1s, 2s, and so on.
           To exclude a UPS from the shutdown sequence, set this to -1.

           The default value for this parameter is 0.

       desc
           Optional. This allows you to set a brief description that upsd will provide to clients
           that ask for a list of connected equipment.

       nolock
           Optional. When you specify this, the driver skips the port locking routines every time
           it starts. This may allow other processes to seize the port if you start more than one
           accidentally.

           You should only use this if your system won’t work without it.

           This may be needed on Mac OS X systems.

       ignorelb
           Optional. When you specify this, the driver ignores a low battery condition flag that
           is reported by the UPS (some devices will switch off almost immediately after setting
           this flag, or will report this as soons as the mains fails). Instead it will use
           either of the following conditions to determine when the battery is low:

               battery.charge < battery.charge.low
               battery.runtime < battery.runtime.low

           The idea is to set the battery.charge.low and/or battery.runtime.low levels in
           ups.conf to a value that gives enough time to cleanly shutdown your system:

               override.battery.charge.low = 30
               override.battery.runtime.low = 180

           In order for this to work, your UPS should be able to (reliably) report charge and/or
           runtime remaining on battery. Use with caution!

       maxstartdelay
           Optional. This can be set as a global variable above your first UPS definition and it
           can also be set in a UPS section. This value controls how long upsdrvctl will wait for
           the driver to finish starting. This keeps your system from getting stuck due to a
           broken driver or UPS.

           The default is 45 seconds.

       default.<variable>
           Optional. Set a default value for <variable> which is used in case the UPS doesn’t
           provide a value, but will be overwritten if a value is available from the UPS:

               default.input.voltage.nominal = 230

           The above will report the nominal input voltage to be 230, unless the UPS tells us
           differently.

       override.<variable>
           Optional. Set a value for <value> that overrides any value that may be read from the
           UPS. Used for overriding values from the UPS that are clearly wrong (some devices
           report wrong values for battery voltage for instance):

               override.battery.voltage.nominal = 12

           Use with caution! This will only change the appearance of the variable to the outside
           world, internally in the UPS the original value is used.

       All other fields are passed through to the hardware-specific part of the driver. See those
       manuals for the list of what is allowed.

INTEGRATION

       upsdrvctl(8) uses this file to start and stop the drivers.

       The drivers themselves also obtain configuration data from this file. Each driver looks up
       its section and uses that to configure itself.

       upsd(8) learns about which UPSes are installed on this system by reading this file. If
       this system is called "doghouse" and you have defined a UPS in your ups.conf called
       "snoopy", then you can monitor it from upsc(8) or similar as "snoopy@doghouse".

SEE ALSO

       upsd(8), nutupsdrv(8), upsdrvctl(8)

   Internet resources
       The NUT (Network UPS Tools) home page: http://www.networkupstools.org/