Provided by: sg3-utils_1.36-1ubuntu1_amd64 bug

NAME

       sg_referrals - send SCSI REPORT REFERRALS command

SYNOPSIS

       sg_referrals   [--help]   [--hex]   [--lba=LBA]   [--maxlen=LEN]  [--one-segment]  [--raw]
       [--verbose] [--version] DEVICE

DESCRIPTION

       Send the SCSI REPORT REFERRALS command to  the  DEVICE  and  outputs  the  response.  This
       command  was  introduced  in  (draft) SBC-3 revision 24 and devices that support referrals
       should support this command.

       The default action  is  to  decode  the  response  for  all  user  data  segment  referral
       descriptors. The amount of output can be reduced by the --lba and --one-segment options.

OPTIONS

       Arguments to long options are mandatory for short options as well.

       -h, --help
              output the usage message then exit.

       -H, --hex
              output response to this command in ASCII hex.

       -l, --lba=LBA
              where  LBA  is  the  Logical Block Address (LBA) in the first user data segment the
              DEVICE should report the referrals parameter data for.

       -m, --maxlen=LEN
              where LEN is the (maximum) response length in bytes. It  is  placed  in  the  cdb's
              "allocation  length"  field. If not given then 256 is used. 256 is enough space for
              the response header and user data segment descriptors.

       -s, --one-segment
              report the user data segment of the segment spefified by the LBA parameter only.

       -r, --raw
              output response in binary (to stdout).

       -v, --verbose
              increase the level of verbosity, (i.e. debug output). Additional output  caused  by
              this option is sent to stderr.

       -V, --version
              print the version string and then exit.

NOTES

       For  a  discussion  of referrals see section 4.25 of sbc3r25.pdf at http://www.t10.org (or
       the corresponding section of a later draft).

EXIT STATUS

       The exit status of sg_referrals is 0 when it is successful. Otherwise see the sg3_utils(8)
       man page.

AUTHORS

       Written by Douglas Gilbert and Hannes Reinecke.

REPORTING BUGS

       Report bugs to <dgilbert at interlog dot com>.

COPYRIGHT

       Copyright © 2009-2012 Douglas Gilbert and Hannes Reinecke
       This  software  is distributed under a FreeBSD license. There is NO warranty; not even for
       MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

SEE ALSO

       sg_vpd(8)