Provided by: crrcsim_0.9.12-5build2_amd64
crrcsim - a model-airplane flight simulation program
crrcsim [-fvhV] [-l landscape-file] [-c cdepth] [-x xres] [-y yres] [-d winddir] [-w windvel] [-g config-file] [-s on|off] [-u on|off] [-m AILERON|RUDDER] [-b nr:buttonfunc] [-i method] airplane-file
crrcsim is a model-airplane flight simulation program for Linux with ports to other platforms. Using crrcsim you can learn how to fly model aircraft, test new aircraft designs, and improve your skills by practicing in the relative safety of your PC.
-b nr:buttonfunc Bind a joystick button to a function. nr is the number of the joystick button. For example, -b 2:INCTHROTTLE will increase the current throttle setting by 10% each time button #2 is pressed. See section BUTTON FUNCTIONS for a listing of all possible functions. -c cdepth Color-depth in bits-per-pixel -d winddir Wind direction in degrees. -f Start in fullscreen mode. -g config-file Specify a config file. -h Display help and exit. -i type Select input method. -l landscape-file Load the landscape defined by landscape-file -m AILERON|RUDDER Specify which function is controlled by horizontal mouse movement (if the input method is set to MOUSE). -s on|off Enable/disable sound (default: on). -u on|off Enable/disable graphical user interface (default: on). -v Enable on-screen display of some values. This option may be specified up to three times. -V Only print version information and exit. -w windvel Wind velocity in ft/s. -x xres Horizontal resolution in pixels. -y yres Vertical resolution in pixels.
PAUSE Pause the simulation. RESUME Resume the simulation from pause mode. RESET Restart the simulation with the current configuration. ZOOMIN Increase the zoom factor of the current view. ZOOMOUT Decrease the zoom factor of the current view. INCTHROTTLE Increase the throttle by 10%. DECTHROTTLE Decrease the throttle by 10%.
KEYBOARD The airplane is controlled by the keyboard. MOUSE Elevator and either aileron or rudder (depending on the -m option) are controlled by the mouse. Throttle can be adjusted by using the keyboard. JOYSTICK The airplane is controlled by the joystick. Control functions can be mapped to the joystick axes with the -b option. RCTRAN Reads the PPM signal from an r/c transmitter using the parallel port and the rctran kernel module. SERPIC For PPM interfaces connected to a serial port (aka 'FMS interface'). SERIAL2 A different serial port interface. PARALLEL Reads the PPM signal from an r/c transmitter using the parallel port. AUDIO Reads the PPM signal from an r/c transmitter using a sound card. MNAV Interface to the MNAV autopilot system. ZHENHUA For Walkera transmitters connected directly to the serial port.
~/.crrcsim/crrcsim.xml Default configuration file. Overridden by the -g option.
crrcsim was originally written by Jan Kansky <email@example.com>. You may contact the current maintainers on the crrcsim-devel mailing list at <firstname.lastname@example.org>.