Provided by: dacs_1.4.28b-3ubuntu1_amd64 bug


       dacshttp - perform an HTTP/HTTPS request


       dacshttp [-get | -post | -delete | -head | -options | -soptions | -put] [-ll log_level]
                [-prompt] [-v] [--version] [[-ct string] | [--content-type string]]
                [{-header name value}...] [-headers filename] [-body filename] [-ih]
                [-user-agent string] [{-p name value}...] [-proto version-num]
                [-proxy proxyhost:proxyport]
                [-proxymatch hostname[:port] proxyhost:proxyport] [-f name filename]
                [{-cookies filename}...] [-ah] [-ssl command-line] [-ssl-flags flags] uri


       This program is part of the DACS suite. It is a stand-alone program that neither accepts
       the usual DACS command line options (dacsoptions[1]) nor accesses any DACS configuration

       This general-purpose utility sends an HTTP/HTTPS request for uri to a web server and
       prints the reply to its standard output.

       dacshttp will automatically follow redirects according to RFC 2616[2] and up to a
       compile-time maximum, unless the -prompt flag is given. A non-standard extension is that a
       redirect to a non-absolute URI is interpreted in a manner compatible with most browsers.

       In versions 1.4.27b and earlier, this command was called http.

           DACS can issue its own HTTP requests, such as from dacs_authenticate to an external
           authentication module. This HTTP functionality is provided by the same support code
           that the dacshttp command uses, and therefore much of the following information
           applies to these internally generated requests also (e.g., HTTP_PROG[3], SSL_PROG[4],


       The HTTP GET method is used by default, but some flags implicitly select a different
       method (e.g., -f and -p). One of the following flags can be used to explicitly specify the
       HTTP method, provided it is compatible with the other options:

           Use the GET method (the default).

           Use the POST method.

           Use the HEAD method.

           Use the PUT method.

           Use the DELETE method.

           Use the OPTIONS method.

           Use the OPTIONS method but ignore anything that follows the authority component of uri
           and instead use the special case "*" request URI that means that the request applies
           to the server itself rather than to a particular resource.

       These command line flags are also recognized:

           If cookies (credentials) are to be sent (see -cookies), use an Authorization header
           rather than a Cookie header.

       -body filename
           Read the message body from filename. It is assumed that the body has already been
           appropriately formatted for the request's content type.

       -cookies filename
           Obtain cookies from filename, one per line, to send with the request using the Cookie
           header. Multiple cookies are separated using a semi-colon, which follows the Netscape
           spec[9]. Alternatively, multiple cookies can be combined on a single line, separated
           by either a semi-colon or a comma (following RFC 2109[10] or RFC 2965[11]). This
           argument may be repeated.

       -ct string
       --content-type string
           Set the Content-Type request-header to string. If the request has an entity-body, the
           default Content-Type is application/x-www-form-urlencoded; if the request does not
           have an entity-body, by default the Content-Type request-header is not set.

       -f name filename
           Passes and encodes the contents of filename as the value for name. By default, the
           POST method will be used, although PUT and OPTIONS can be selected. If filename is
           "-", the standard input is read; this form can only be used once on the command line.
           This argument may be repeated.

       -header name value
           This flag, which may be repeated, causes the HTTP header name: value to be sent with
           the request. Neither name nor value are checked in any way.

               This will not override headers required or implied by other command line flags;
               for example, the following flags are not equivalent:

                   -header User-Agent foo
                   -user-agent foo

               The former case will send the User-Agent header twice.

       -headers filename
           Read additional message headers from filename, one per line, and send them with the
           request (refer to the -header flag). This flag may be repeated.

           Include the HTTP response headers in the output. They are terminated by a blank line.
           The status line is labelled "Status-Line".

       -ll log_level
           Set the debugging output level to log_level (see dacs(1)[12]). The default level is
           warn, and the -v flag bumps the level to debug or trace.

       -p name value
           Passes and encodes name=value as part of the entity-body. By default, the POST method
           will be used, although PUT and OPTIONS can be selected. This argument may be repeated.

           Prompt the user for permission to proceed after certain events, such as receiving a
           redirect; the response is affirmative only if it is "yes" or "y". If this option is
           not specified, the affirmative action will automatically be taken.

       -proto version-num
           Function in compliance with version-num of the HTTP protocol (e.g., 1.0).

       -proxy proxyhost:proxyport
           Forward all HTTP requests (except for those that match a -proxymatch flag) to the
           proxy server at proxyport (a numeric port number or recognized service name) on
           proxyhost (a domain name or IP address). Proxying is not fully supported by dacshttp,
           but it will connect to the specified proxy server instead of the server implied by

       -proxymatch hostname[:port] proxyhost:proxyport
           If hostname matches the host specified in uri, proxy the HTTP request through
           proxyhost (a domain name or IP address) at proxyport (a numeric port number or
           recognized service name). If port is not given, it is assumed to be 80 (for the http
           scheme) or 443 (for the https scheme). Matching is done by resolving hostname to an IP
           address (if necessary) and comparing it to the effective IP address that is specified
           by uri. This flag is given priority over the -proxy flag, so it can be used to
           override a default proxy server.

               This option is not implemented. The SSL flags apply to all connections; this is
               probably a bug.

       -ssl command-line
           This flag indicates that HTTPS (i.e, HTTP over an SSL connection) is to be used,
           regardless of the scheme specified by uri. Because dacshttp does not directly include
           SSL functionality, it uses pipes to communicate with an external program that provides
           the SSL connection. The sslclient(1)[13] command is strongly recommended for this
           purpose (version 3.26 of stunnel(1) and stunnel3, which comes with some releases of
           stunnel-4.x, might also work).

           The command-line is a complete shell command line that will be used to run the program
           as a filter. For example, this argument might look like either of:

               -ssl "/usr/local/dacs/bin/sslclient"

               -ssl "/usr/local/bin/stunnel -c -r"

           If the -ssl argument is absent but the uri argument uses the https scheme, dacshttp
           will still try to use SSL. It will attempt to use sslclient(1)[13] and assume it is in
           its default location. If the -ssl argument is present but specifies only one string,
           that string is assumed to be the path to sslclient(1)[13]. The first example below
           will run sslclient(1)[13] from /tmp/sslclient to connect to port 443 at;
           the second example has the same effect but will run sslclient(1)[13] from its default

               % dacshttp -ssl "/tmp/sslclient"
               % dacshttp

       -ssl-flags flags
           If SSL operation is enabled but the -ssl flag is absent or did not simply specify a
           pathname, append flags to the list of arguments to be passed to the external SSL
           provider; when the -ssl flag specifies more than one argument, this flag is ignored.
           The flags string is a space-separated list of arguments. This flag may be repeated.

           For example, in this example dacshttp will invoke sslclient with the two arguments -sm

               % dacshttp -ssl-flags "-sm"

           If a wildcard server certificate is used, it may be necessary to explicitly match all
           hosts within a specific domain:

               % dacshttp -ssl-flags "-sm .*\.example\.com"

               When called by dacshttp, error messages produced by sslclient may be lost. If you
               encounter problems with SSL operation, work with sslclient(1)[13] to ensure that
               an SSL connection can be established, or to determine and resolve the problem. If
               you discover that sslclient requires command line flags for proper operation, you
               will need to make sure that dacshttp passes those flags to it.

       -user-agent string
           Set the User-Agent request-header to string. If not provided, this string will have
           the prefix "DACS-http/", followed by a DACS release identifier (example:

           Increase the level of debugging output. This will cause response headers to be
           displayed, for example. The flag may be repeated.

           Print version information to stderr, then exit immediately.

       The uri argument is the URL to invoke. It may include a query string suffix (even if HTTP
       POST is selected).

       Whether selected implicitly or explicitly, the command line must specify exactly one of
       the HTTP methods.

       Request headers specified using the -header or -headers flags are sent in the order in
       which the flags appear on the command line. If they are read from a file, there ordering
       is maintained.


       The following will retrieve RFC 2616[2] and save it in rfc2616.txt:

           % dacshttp "" > rfc2616.txt

       This will do a GET on the given URL, passing the query string foo=baz, and writing the
       result to stdout:

           % dacshttp ""

       This will do a POST on the given URL, passing two arguments:

           % dacshttp -p foo baz -p bar zork

       This will make an HTTP GET method request over SSL to the given URL:

           % dacshttp -ssl "/usr/local/dacs/bin/sslclient" \


       The program exits 0 if everything was fine, 1 if an error occurred.


       Use of an SSL provider other than sslclient(1)[13] is officially deprecated. Recent
       development makes it doubtful that any other program will function properly with dacshttp.

       It is only a partial implementation of RFC 2616[2] (HTTP 1.0). It only talks HTTP (no
       other URI schemes are supported). Received cookies are discarded, there is no support for
       RFC 2617[14] authentication, including proxy authentication, and no client-side caching is
       performed.  dacshttp should not require an external program to provide SSL functionality.
       The program is a bit confused about when it should be able to send a message body.


       sslclient(1)[13], lynx(1)[15], curl(1)[16], Wget(1)[17], RFC 1738[18], RFC 2396[19], RFC
       2616[2], RFC 3986[20]


       Distributed Systems Software ([21])


       Copyright2003-2013 Distributed Systems Software. See the LICENSE[22] file that accompanies
       the distribution for licensing information.


        1. dacsoptions

        2. RFC 2616

        3. HTTP_PROG

        4. SSL_PROG

        5. SSL_PROG_ARGS

        6. SSL_PROG_CA_CRT


        8. VFS

        9. Netscape spec

       10. RFC 2109

       11. RFC 2965

       12. dacs(1)

       13. sslclient(1)

       14. RFC 2617

       15. lynx(1)

       16. curl(1)

       17. Wget(1)

       18. RFC 1738

       19. RFC 2396

       20. RFC 3986


       22. LICENSE