Provided by: gammu_1.33.0-3_amd64 bug

NAME

       gammu - Does some neat things with your cellular phone or modem.

SYNOPSIS

          gammu [parameters] <command> [options]

       Commands  actually  indicate  which  operation should Gammu perform. They can be specified
       with or without leading --.

DESCRIPTION

       This program is a tool for mobile phones. Many  vendors  and  phones  are  supported,  for
       actual listing see Gammu Phones Database.

   Options
       Parameters before command configure gammu behaviour:

       -c, --config <filename>
              name of configuration file

       -s, --section <confign>
              section of config file to use, eg. 42

       -d, --debug <level>
              debug level (see LogFormat in gammurc for possible values)

       -f, --debug-file <filename>
              file for logging debug messages

   Call commands
       answercall [id]
              Answer incoming call.

       cancelcall [id]
              Cancel incoming call

       canceldiverts
              Cancel all existing call diverts.

       conferencecall id
              Initiates a conference call.

       dialvoice number [show|hide]
              Make voice call from SIM card line set in phone.

              show|hide - optional parameter whether to disable call number indication.

       divert get|set all|busy|noans|outofreach all|voice|fax|data [number timeout]
              Manage or display call diverts.

              get or set
                     whether to get divert information or to set it.

              all or busy or noans or outofreach
                     condition when apply divert

              all or voice or fax or data
                     call type when apply divert

              number number where to divert

              timeout
                     timeout when the diversion will happen

       getussd code
              Retrieves USSD information - dials a service number and reads response.

       holdcall id
              Holds call.

       maketerminatedcall number length [show|hide]
              Make  voice  call  from  SIM  card line set in phone which will be terminated after
              length seconds.

       senddtmf sequence
              Plays DTMF sequence. In some phones available only during calls

       splitcall id
              Splits call.

       switchcall [id]
              Switches call.

       transfercall [id]
              Transfers call.

       unholdcall id
              Unholds call.

   SMS and EMS commands
       Sending messages might look a bit complicated on first attempt to use.   But  be  patient,
       the  command  line  has  been  written  in  order to allow almost every usage. See EXAMPLE
       section for some hints on usage.

       There is also an option to use gammu-smsd when you want to send or receive  more  messages
       and process them automatically.

   Introduction to SMS formats
       Gammu has support for many SMS formats like:

       Nokia Smart Messaging
              used   for  monochromatic  picture  images,  downloadable  profiles,  monochromatic
              operator logos, monochromatic caller logos and monophonic ringtones

       Linked SMS
              both with 8 and 16-bit identification numbers in headers

       EMS    this is SMS format used for  saving  monochromatic  images,  monophonic  ringtones,
              animations, text formatting and others

       MMS notifications
              contains links where phone should download MMS

       Alcatel logo messages
              proprietary format for logos

       You need to ensure that the target phone supports message type you want to send. Otherwise
       the phone will not be able to display it or will even crash, because firmware of phone did
       not expect this possibility.

   Encoding chars in SMS text
       Text in SMS can be coded using two ways:

   GSM Default Alphabet
       With  GSM  Default  Alphabet  you can fit at most 160 chars into single SMS (Gammu doesn't
       support compressing such texts according to GSM standards, but it isn't big limit, because
       there are no phones supporting them), but they're from limited set:

       · all Latin small and large

       · all digits

       · some Greek

       · some other national

       · some symbols like  @ ! " # & / ( ) % * + = - , . : ; < > ?

       · few others

   Unicode
       With Unicode single SMS can contain at most 70 chars, but these can be any chars including
       all national and special ones.

       WARNING:
          Please note, that some older phones might have problems displaying such message.

   Conversion
       Gammu tries to do the best to handle non ASCII characters in your message.  Everything  is
       internally  handled  in  Unicode  (the  input  is  converted  depending  on  your  locales
       configuration) and in case message uses Unicode the text will be  given  as  such  to  the
       message.

       Should  the  message  be  sent  in  GSM  Default  Alphabet,  Gammu will try to convert all
       characters to keep message readable. Gammu does  support  multi  byte  encoding  for  some
       characters  in  GSM  Default  Alphabet  (it is needed for ^ { } \ [ ] ~ |). The characters
       which are not present  in  GSM  Default  Alphabet  are  transliterated  to  closest  ASCII
       equivalent (accents are removed).  Remaining not known characters are replaced by question
       mark.

   SMS commands
       addsmsfolder name

       deleteallsms folder
              Delete all SMS from specified SMS folder.

       deletesms folder start [stop]
              Delete SMS from phone. See description for gammu getsms for info about sms  folders
              naming convention.

              Locations are numerated from 1.

       displaysms ... (options like in sendsms)
              Displays  PDU  data of encoded SMS messages. It accepts same parameters and behaves
              same like sendsms.

       getallsms -pbk
              Get all SMS from phone. In some phones you will have also SMS  templates  and  info
              about  locations  used to save Picture Images. With each sms you will see location.
              If you want to get such sms from phone alone, use gammu getsms.

       geteachsms -pbk
              Similiary to gammu getallsms. Difference is, that links all concatenated sms

       getsms folder start [stop]
              Get SMS.

              Locations are numerated from 1.

              Folder 0 means that sms is being read from "flat" memory (all sms from all  folders
              have  unique  numbers).  It's  sometimes emulated by Gammu. You can use it with all
              phones.

              Other folders like 1, 2, etc. match folders in phone such as  Inbox,  Outbox,  etc.
              and  each  sms  has unique number in his folder. Name of folders can depend on your
              phone (the most often 1="Inbox", 2="Outbox", etc.).  This method is  not  supported
              by  all phones (for example, not supported by Nokia 3310, 5110, 6110). If work with
              your phone, use gammu getsmsfolders to get folders list.

       getsmsc [start [stop]]
              Get SMSC settings from SIM card.

              Locations are numerated from 1.

       getsmsfolders
              Get names for SMS folders in phone

       savesms TYPE [type parameters] [type options] [-folder  id]  [-unread]  [-read]  [-unsent]
       [-sent]  [-sender  number] [-smsname name] [-smscset number] [-smscnumber number] [-reply]
       [-maxsms num]
              Saves SMS to phone, see bellow for TYPE options.

                 -smscset number
                        SMSC number will be taken from phone stored SMSC configuration number.

                        Default: 1

                 -smscnumber number
                        SMSC number

                 -reply reply SMSC is set

                 -folder number
                        save to specified folder.

                        Folders are numerated from 1.

                        The  most  often  folder  1  =  "Inbox",  2  =  "Outbox",etc.  Use  gammu
                        getsmsfolders to get folder list.

                 -unread
                        makes message unread. In some phones (like 6210) you won't see unread sms
                        envelope after saving such sms. In some phones with internal  SMS  memory
                        (like 6210) after using it with folder 1 SIM SMS memory will be used

                 -read  makes  message  read. In some phones with internal SMS memory (like 6210)
                        after using it with folder 1 SIM SMS memory will be used

                 -unsent
                        makes message unsent

                 -sent  makes message sent

                 -smsname name
                        set message name

                 -sender number
                        set sender number (default: Gammu)

                 -maxsms num
                        Limit maximal number of messages which will be created. If there are more
                        messages, Gammu will terminate with failure.

                 Types of messages:

                 ANIMATION frames file1 file2...
                        Save an animation as a SMS. You need to give number of frames and picture
                        for each frame. Each picture can be in any  picture  format  which  Gammu
                        supports (B/W bmp, gif, wbmp, nol, nlm...).

                 BOOKMARK file location
                        Read  WAP bookmark from file created by gammu backup command and saves in
                        Nokia format as SMS

                 CALENDAR file location
                        Read calendar note from file created by gammu backup command and saves in
                        VCALENDAR 1.0 format as SMS. The location identifies position of calendar
                        item to be read in backup file (usually 1, but can be useful in case  the
                        backup contains more items).

                 CALLER file
                        Save  caller  logo as sms in Nokia (Smart Messaging) format - size 72x14,
                        two colors.

                        WARNING:
                            Please note, that it isn't designed for colour  logos  available  for
                            example in DCT4/TIKU - you need to put bitmap file there inside phone
                            using filesystem commands.

                 EMS [-unicode] [-16bit] [-format lcrasbiut] [-text text] [-unicodefiletext file]
                 [-defsound  ID]  [-defanimation  ID]  [-tone10 file] [-tone10long file] [-tone12
                 file] [-tone12long file] [-toneSE file] [-toneSElong file]  [-fixedbitmap  file]
                 [-variablebitmap  file] [-variablebitmaplong file] [-animation frames file1 ...]
                 [-protected number]
                        Saves EMS sequence. All format specific parameters (like  -defsound)  can
                        be used few times.

                        -text  adds text

                        -unicodefiletext
                               adds text from Unicode file

                        -defanimation
                               adds default animation with ID specified by user. ID for different
                               phones are different.

                        -animation
                               adds "frames" frames read from file1, file2, etc.

                        -defsound
                               adds default sound with ID specified by  user.  ID  for  different
                               phones are different.

                        -tone10
                               adds IMelody version 1.0 read from RTTL or other compatible file

                        -tone10long
                               IMelody  version  1.0  saved  in  one  of few SMS with UPI. Phones
                               compatible with UPI (like Sony-Ericsson  phones)  will  read  such
                               ringtone as one

                        -tone12
                               adds IMelody version 1.2 read from RTTL or other compatible file

                        -tone12long
                               IMelody  version  1.2  saved  in  one  of few SMS with UPI. Phones
                               compatible with UPI (like Sony-Ericsson  phones)  will  read  such
                               ringtone as one

                        -toneSE
                               adds IMelody in "short" form supported by Sony-Ericsson phones

                        -toneSElong
                               add Sony-Ericsson IMelody saved in one or few SMS with UPI

                        -variablebitmap
                               bitmap in any size saved in one SMS

                        -variablebitmaplong
                               bitmap with maximal size 96x128 saved in one or few sms

                        -fixedbitmap
                               bitmap 16x16 or 32x32

                        -protected
                               all  ringtones and bitmaps after this parameter (excluding default
                               ringtones and logos) will be  "protected"  (in  phones  compatible
                               with  ODI  like  SonyEricsson  products  it  won't  be possible to
                               forward them from phone menu)

                        -16bit Gammu uses SMS headers with 16-bit numbers for saving linking info
                               in SMS (it means less chars available for user in each SMS)

                        -format lcrasbiut
                               last text will be formatted. You can use combinations of chars:

                                                ┌──────────┬────────────────────┐
                                                │Character │ Formating          │
                                                ├──────────┼────────────────────┤
                                                │l         │ left aligned       │
                                                ├──────────┼────────────────────┤
                                                │c         │ centered           │
                                                ├──────────┼────────────────────┤
                                                │r         │ right aligned      │
                                                ├──────────┼────────────────────┤
                                                │a         │ large font         │
                                                ├──────────┼────────────────────┤
                                                │s         │ small font         │
                                                ├──────────┼────────────────────┤
                                                │b         │ bold font          │
                                                ├──────────┼────────────────────┤
                                                │i         │ italic font        │
                                                ├──────────┼────────────────────┤
                                                │u         │ underlined font    │
                                                ├──────────┼────────────────────┤
                                                │t         │ strikethrough font │
                                                └──────────┴────────────────────┘

                 MMSINDICATOR URL Title Sender
                        Creates  a  MMS  indication  SMS.  It  contains  URL where the actual MMS
                        payload is stored which needs to  be  SMIL  encoded.  The  phone  usually
                        downloads  the  MMS  data  using  special  APN,  which  does not count to
                        transmitted data, however there might be limitations which  URLs  can  be
                        accessed.

                 MMSSETTINGS file location
                        Saves  a  message  with MMS configuration. The configuration will be read
                        from Gammu backup file from given location.

                 OPERATOR file [-netcode netcode] [-biglogo]
                        Save operator logo as sms in Nokia (Smart Messaging) format - size  72x14
                        in two colors.

                        -biglogo
                               Use 78x21 formatted logo instead of standard 72x14.

                        NOTE:
                            This  isn't  designed for colour logos available for example in newer
                            phones - you need  to  put  bitmap  file  there  inside  phone  using
                            filesystem commands.

                 PICTURE file [-text text] [-unicode] [-alcatelbmmi]
                        Read  bitmap  from  2  colors file (bmp, nlm, nsl, ngg, nol, wbmp, etc.),
                        format into bitmap in Smart Messaging  (72x28,  2  colors,  called  often
                        Picture  Image  and saved with text) or Alcatel format and send/save over
                        SMS.

                 PROFILE [-name name] [-bitmap bitmap] [-ringtone ringtone]
                        Read ringtone (RTTL) format, bitmap (Picture Image size) and name, format
                        into Smart Messaging profile and send/save as SMS.

                        WARNING:
                            Please  note, that this format is abandoned by Nokia and supported by
                            some (older) devices only like Nokia 3310.

                 RINGTONE file [-long] [-scale]
                        Read RTTL ringtone from file and  save  as  SMS  into  SIM/phone  memory.
                        Ringtone is saved in Nokia (Smart Messaging) format.

                        -long  ringtone is saved using Profile style. It can be longer (and saved
                               in 2 SMS), but decoded only by newer phones (like 33xx)

                        -scale ringtone will have Scale info for each note. It will allow one  to
                               edit it correctly later in phone composer (for example, in 33xx)

                 SMSTEMPLATE  [-unicode]  [-text  text]  [-unicodefiletext  file]  [-defsound ID]
                 [-defanimation ID] [-tone10 file] [-tone10long file] [-tone12 file] [-tone12long
                 file]    [-toneSE    file]    [-toneSElong    file]    [-variablebitmap    file]
                 [-variablebitmaplong file] [-animation frames file1 ...]
                        Saves a SMS template (for Alcatel phones).

                 TEXT [-inputunicode] [-16bit] [-flash]  [-len  len]  [-autolen  len]  [-unicode]
                 [-enablevoice]   [-disablevoice]   [-enablefax]   [-disablefax]   [-enableemail]
                 [-disableemail] [-voidsms]  [-replacemessages  ID]  [-replacefile  file]  [-text
                 msgtext] [-textutf8 msgtext]
                        Take text from stdin (or commandline if -text specified) and save as text
                        SMS into SIM/phone memory.

                        -flash Class 0 SMS (should be displayed after  receiving  on  recipients'
                               phone display after receiving without entering Inbox)

                        -len len
                               specify,  how  many  chars  will be read. When use this option and
                               text will be longer than 1 SMS, will be split into more linked SMS

                        -autolen len
                               specify, how many chars will be read. When  use  this  option  and
                               text  will  be  longer  than 1 SMS, will be split into more linked
                               SMS.Coding type (SMS default alphabet/Unicode) is set according to
                               input text

                        -enablevoice
                               sms will set voice mail indicator. Text will be cut to 1 sms.

                        -disablevoice
                               sms will not set voice mail indicator. Text will be cut to 1 sms.

                        -enablefax
                               sms will set fax indicator. Text will be cut to 1 sms.

                        -disablefax
                               sms will not set fax indicator. Text will be cut to 1 sms.

                        -enableemail
                               sms will set email indicator. Text will be cut to 1 sms.

                        -disableemail
                               sms will not set email indicator. Text will be cut to 1 sms.

                        -voidsms
                               many  phones after receiving it won't display anything, only beep,
                               vibrate or turn on light. Text will be cut to 1 sms.

                        -unicode
                               SMS will be saved in Unicode format

                               NOTE:
                                   The ~ char in SMS text and  -unicode  option  (Unicode  coding
                                   required)  can  cause  text of SMS after ~ char  blink in some
                                   phones (like Nokia 33xx).

                        -inputunicode
                               input text is in Unicode.

                               NOTE:
                                   You can create Unicode file using WordPad in  Windows  (during
                                   saving select "Unicode Text Document" format). In Unix can use
                                   for example YUdit or vim.

                        -text  get text from command line instead of stdin.

                        -textutf8
                               get text in UTF-8 from command line instead of stdin.

                               NOTE:
                                   Gammu detects your locales and uses by default encoding  based
                                   on  this. Use this option only when you know the input will be
                                   in UTF-8 in all cases.

                        -16bit Gammu uses SMS headers with 16-bit numbers for saving linking info
                               in SMS (it means less chars available for user in each SMS)

                        -replacemessages ID
                               ID  can be 1..7. When you will use option and send more single SMS
                               to one recipient with the same ID, each another SMS  will  replace
                               each previous with the same ID

                        -replacefile file
                               File  with  replacement  table in unicode (UCS-2), preferably with
                               byte order mark (BOM). It contains pairs of chars, first one is to
                               replace,  second is replacement one. The replacement is done after
                               reading text for the message.

                               For example replacement 1 (0x0061) with a (0x0031) would  be  done
                               by file with following content (hex dump, first two bytes is BOM):

                                   ff fe 61 00 31 00

                 TODO file location
                        Saves  a  message  with  a  todo entry. The content will be read from any
                        backup format which Gammu supports and from given location.

                 VCARD10|VCARD21 file SM|ME location [-nokia]
                        Read phonebook entry from file created by gammu backup command and  saves
                        in  VCARD  1.0  (only  name  and  default number) or VCARD 2.1 (all entry
                        details with all numbers, text and name) format  as  SMS.   The  location
                        identifies position of contact item to be read in backup file (usually 1,
                        but can be useful in case the backup contains more items).

                 WAPINDICATOR URL Title
                        Saves a SMS with a WAP indication for given URL and title.

                 WAPSETTINGS file location DATA|GPRS
                        Read WAP settings from file created by gammu backup command and saves  in
                        Nokia format as SMS

       sendsms  TYPE  destination [type parameters] [type options] [-smscset number] [-smscnumber
       number] [-reply]  [-report]  [-validity  HOUR|6HOURS|DAY|3DAYS|WEEK|MAX]  [-save  [-folder
       number]]
              Sends  a  message  to  a  destination number, most parameters are same as for gammu
              savesms.

              -save  will also save message which is being sent

              -report
                     request delivery report for message

              -validity HOUR|6HOURS|DAY|3DAYS|WEEK|MAX
                     sets how long will be the message valid (SMSC will the discard  the  message
                     after this time if it could not deliver it).

       setsmsc location number
              Set  SMSC  settings  on SIM card. This keeps all SMSC configuration intact, it just
              changes the SMSC number.

              Locations are numerated from 1.

   Memory (phonebooks and calls) commands
   Memory types
       Gammu recognizes following memory types:

       DC     Dialled calls

       MC     Missed calls

       RC     Received calls

       ON     Own numbers

       VM     voice mailbox

       SM     SIM phonebook

       ME     phone internal phonebook

       FD     fixed dialling

       SL     sent SMS log

   Memory commands
       deleteallmemory DC|MC|RC|ON|VM|SM|ME|MT|FD|SL
              Deletes all entries from specified memory type.

              For memory types description see Memory types.

       deletememory DC|MC|RC|ON|VM|SM|ME|MT|FD|SL start [stop]
              Deletes entries in specified range from specified memory type.

              For memory types description see Memory types.

       getallmemory DC|MC|RC|ON|VM|SM|ME|MT|FD|SL
              Get all memory locations from phone.

              For memory types description see Memory types.

       getmemory DC|MC|RC|ON|VM|SM|ME|MT|FD|SL start [stop [-nonempty]]
              Get memory location from phone.

              For memory types description see Memory types.

              Locations are numerated from 1.

       getspeeddial start [stop]
              Gets speed dial choices.

       searchmemory text
              Scans all memory entries for given text. It  performs  case  insensitive  substring
              lookup. You can interrupt searching by pressing Ctrl+C.

   Filesystem commands
       Gammu  allows  one to access phones using native protocol (Nokias) or OBEX. Your phone can
       also support usb storage, which is handled on the operating system level  and  Gammu  does
       not use that.

       addfile   folderID   name  [-type  JAR|BMP|PNG|GIF|JPG|MIDI|WBMP|AMR|3GP|NRT]  [-readonly]
       [-protected] [-system] [-hidden] [-newtime]
              Add file with specified name to folder with specified folder ID.

              -type  File type was required for filesystem 1 in Nokia phones (current  filesystem
                     2 doesn't need this).

              -readonly
                     Sets the read only attribute.

              -protected
                     Sets the protected attribute (file can't be for example forwarded from phone
                     menu).

              -system
                     Sets the system attribute.

              -hidden
                     Sets the hidden attribute (file is hidden from phone menu).

              -newtime
                     After using it date/time of file modification  will  be  set  to  moment  of
                     uploading.

       addfolder parentfolderID name
              Create a folder in phone with specified name in a folder with specified folder ID.

       deletefiles fileID
              Delete files with given IDs.

       deletefolder name
              Delete folder with given ID.

       getfilefolder fileID, fileID, ...
              Retrieve files or all files from folder with given IDs from a phone filesytem.

       getfiles fileID, fileID, ...
              Retrieve files with given IDs from a phone filesytem.

       getfilesystem [-flatall|-flat]
              Display  info  about  all folders and files in phone memory/memory card. By default
              there is tree displayed, you can change it:

              -flatall
                     there are displayed full file/folder details like  ID  (first  parameter  in
                     line)

              -flat

              NOTE:
                 In some phones (like N6230) content of some folders (with more files) can be cut
                 (only part of files will be displayed) for example on infrared connection.  This
                 is not Gammu issue, but phone firmware problem.

       getfilesystemstatus
              Display  info  filesystem  status - number of bytes available, used or used by some
              specific content.

       getfolderlisting folderID
              Display files and folders available in folder with given folder  ID.  You  can  get
              ID's using getfilesystem -flatall.

              WARNING:
                 Please note, that in some phones (like N6230) content of some folders (with more
                 files) can be cut (only part of files will be displayed) for example on infrared
                 connection. This is not Gammu issue, but phone firmware problem.

       getrootfolders
              Display info about drives available in phone/memory card.

       sendfile name
              Sends  file to a phone. It's up to phone to decide where to store this file and how
              to handle it (for example when you send vCard or vCalendar,  most  of  phones  will
              offer you to import it.

       setfileattrib folderID [-system] [-readonly] [-hidden] [-protected]

   Logo and pictures commands
       These  options  are  mainly  (there are few exceptions) for monochromatic logos and images
       available in older phones. Recognized file formats: xpm (only saving), 2-colors bmp,  nlm,
       nsl, ngg, nol, wbmp, gif (for Samsung).

       In new models all bitmaps are saved in filesystem and should go into filesystem section

       copybitmap inputfile [outputfile [OPERATOR|PICTURE|STARTUP|CALLER]]
              Allow  one to convert logos files to another. When give ONLY inputfile, output will
              be written to stdout using ASCII art. When give output file  and  format,  in  some
              file formats (like NLM) will be set indicator informing about logo type to given.

       getbitmap TYPE [type options]
              Reads bitmap from phone, following types are supported:

              CALLER location [file]
                     Get caller group logo from phone. Locations 1-5.

              DEALER In  some  models  it's possible to save dealer welcome note - text displayed
                     during enabling phone, which can't be edited from phone menu.  Here you  can
                     get it.

              OPERATOR [file]
                     Get operator logo (picture displayed instead of operator name) from phone.

              PICTURE location [file]
                     Get Picture Image from phone.

              STARTUP [file]
                     Get static startup logo from phone. Allow one to save it in file.

              TEXT   Get startup text from phone.

       setbitmap TYPE [type options]
              Sets bitmap in phone, following types are supported:

              CALLER location [file]
                     Set caller logo.

              COLOUROPERATOR [fileID [netcode]]
                     Sets color operator logo in phone.

              COLOURSTARTUP [fileID]

              DEALER text
                     Sets  welcome message configured by dealer, which usually can not be changed
                     in phone menus.

              OPERATOR [file [netcode]]
                     Set operator logo in phone. When won't give file and netcode, operator  logo
                     will be removed from phone. When will give only filename, operator logo will
                     be displayed for your current  GSM  operator.  When  you  give  additionally
                     network code, it will be displayed for this operator.

              PICTURE file location [text]
                     Sets picture image in phone.

              STARTUP file|1|2|3
                     Set startup logo in phone. It can be static (then you will have to give file
                     name) or one of predefined animated (only some phones  like  Nokia  3310  or
                     3330 supports it, use location 1, 2 or 3 for these).

              TEXT text
                     Sets startup text in phone.

              WALLPAPER fileID
                     Sets wallpaper in phone.

   Ringtones commands
       Ringtones  are  mostly supported only for older phones. For recent phones you usually just
       upload them to some folder in phone filesystem.

       There are recognized various file formats by options described below: rttl, binary  format
       created  for  Gammu, mid (saving), re (reading), ott, communicator, ringtones format found
       in fkn.pl, wav (saving), ime/imy (saving), rng, mmf (for Samsung).

       copyringtone source destination [RTTL|BINARY]
              Copy source ringtone to destination.

       getphoneringtone location [file]
              Get one of "default" ringtones and saves into file

       getringtone location [file]
              Get ringtone from phone in RTTL or BINARY format.

              Locations are numerated from 1.

       getringtoneslist

       playringtone file
              Play aproximation of ringtone over phone buzzer. File can  be  in  RTTL  or  BINARY
              (Nokia DCT3) format.

       playsavedringtone number
              Play  one  of  built-in  ringtones.  This option is available for DCT4 phones.  For
              getting ringtones list use gammu getringtoneslist.

       setringtone file [-location location] [-scale] [-name name]
              Set ringtone in phone. When don't give location, it will be written "with  preview"
              (in phones supporting this feature like 61xx or 6210).

              -scale Scale information will be added to each note of RTTL ringtone. It will avoid
                     scale problems available during editing ringtone in composer from phone menu
                     (for example, in Nokia 33xx).

              NOTE:
                 When  use  ~  char  in ringtone name, in some phones (like 33xx) name will blink
                 later in phone menus.

   Calendar notes commands
       In Nokia 3310, 3315 and 3330  these  are  named  "Reminders"  and  have  some  limitations
       (depending on phone firmware version).

       deletecalendar start [stop]
              Deletes selected calendar entries in phone.

       getallcalendar
              Retrieves all calendar entries from phone.

       getcalendar start [stop]
              Retrieves selected calendar entries from phone.

   To do list commands
       deletetodo start [stop]
              Deletes selected todo entries in phone.

       getalltodo
              Retrieves all todo entries from phone.

       gettodo start [stop]
              Retrieves selected todo entries from phone.

   Notes commands
       getallnotes
              Reads all notes from the phone.

              NOTE:
                 Not all phones supports this function, especially most Sony Ericsson phones even
                 if they have notes inside phone.

   Date, time and alarm commands
       getalarm [start]
              Get alarm from phone, if no location is specified, 1 is used.

       getdatetime
              Get date and time from phone

       setalarm hour minute
              Sets repeating alarm in phone on selected time.

       setdatetime [HH:MM[:SS]] [YYYY/MM/DD]
              Set date and time in phone to date and time set in computer. Please note, that this
              option doesn't show clock on phone screen. It only set date and time.

              NOTE:
                 You  can  make  such synchronization each time, when will connect your phone and
                 use Gammu. See SynchronizeTime in gammurc for details.

   Categories commands
       NOTE:
          Categories are supported only on few phones (Alcatel).

       addcategory TODO|PHONEBOOK text

       getallcategory TODO|PHONEBOOK

       getcategory TODO|PHONEBOOK start [stop]

       listmemorycategory text|number

       listtodocategory text|number

   Backing up and restoring commands
       addnew file [-yes] [-memory ME|SM|..]
              Adds data written in file created using gammu backup command. All things backed  up
              gammu backup can be restored (when made backup to Gammu text file).

              Please  note  that  this adds all content of backup file to phone and does not care
              about current data in the phone (no duplicates are detected).

              Use -yes parameter to answer yes  to  all  questions  (you  want  to  automatically
              restore all data).

              Use  -memory  parameter  to  force usage of defined memory type for storing entries
              regardless what backu format says.

       addsms folder file [-yes]
              Adds SMSes from file (format like gammu  backupsms  uses)  to  selected  folder  in
              phone.

       backup file [-yes]
              Backup  your  phone  to  file. It's possible to backup (depends on phone and backup
              format):

              · phonebook from SIM and phone memory

              · calendar notes

              · SMSC settings

              · operator logo

              · startup (static) logo or startup text

              · WAP bookmarks

              · WAP settings

              · caller logos and groups

              · user ringtones

              There are various backup formats supported and the backup format is  guessed  based
              on file extension:

              · .lmb - Nokia backup, supports contacts, caller logos and startup logo.

              · .vcs - vCalendar, supports calendar and todo.

              · .vcf - vCard, supports contacts.

              · .ldif - LDAP import, supports contacts.

              · .ics - iCalendar, supports calendar and todo.

              · Any  other  extension  is  Gammu  backup  file and it supports all data mentioned
                above, see gammu-backup for more details.

              By default this command is interactive and asks which items tou want to backup.

              Use -yes for answering yes to all questions.

       backupsms file [-yes|-all]
              Stores all SMSes from phone to file into gammu-smsbackup.

              By default this command is interactive and asks which folders you  want  to  backup
              and whether you want to remove messages from phone afterwards.

              Use  -yes  for  answering yes to all questions (backup all messages and delete them
              from phone), or -all to just backup all folders while keeping messages in phone.

       restore file [-yes]

              WARNING:
                 Please note that restoring deletes all current content in  phone.  If  you  want
                 only to add entries to phone, use gammu addnew.

              Restore settings written in file created using gammu backup command.

              In  some  phones  restoring  calendar notes will not show error, but won't be done,
              when phone doesn't have set clock inside.

       restoresms file [-yes]

              WARNING:
                 Please note that this overwrites existing messages in phone (if it supports it).

              Restores SMSes from file (format like gammu backupsms uses) to selected  folder  in
              phone.

       savefile TYPE [type options]
              Converts  between  various  file  formats  supported  by Gammu, following types are
              supported:

              BOOKMARK target.url file location
                     Converts backup format supported by Gammu to vBookmark file.

              CALENDAR target.vcs file location
                     Allows one to convert between various backup formats  which  gammu  supports
                     for calendar events. The file type is guessed (for input file guess is based
                     on extension and file content, for output solely on extension).

              TODO target.vcs file location
                     Allows one to convert between various backup formats  which  gammu  supports
                     for  todo events. The file type is guessed (for input file guess is based on
                     extension and file content, for output solely on extension).

              VCARD10|VCARD21 target.vcf file SM|ME location
                     Allows one to convert between various backup formats  which  gammu  supports
                     for  phonebook  events.  The  file  type is guessed (for input file guess is
                     based on extension and file content, for output solely on extension).

                 See also

                        gammu convertbackup

       convertbackup source.file output.file
              New in version 1.28.94.

              Converts backup between formats supported by Gammu.  Unlike  gammu  savefile,  this
              does  not  give  you any options what to convert, it simply takes converts all what
              can be saved into output file.

                 See also

                        gammu savefile

   Nokia specific commands
       nokiaaddfile TYPE [type options]
              Uploads file to phone to specific location for the type:

              APPLICATION|GAME file [-readonly] [-overwrite] [-overwriteall]
                     Install the *.jar/*.jad file pair of a midlet in  the  application  or  game
                     menu  of the phone. You need to specify filename without the jar/jad suffix,
                     both will be added automatically.

                     -overwrite
                            Delete the application's .jad and .jar files before  installing,  but
                            doesn't delete the application data.

                     -overwriteall
                            Delete the application (same as -overwrite) and all it's data.

                     You can use jadmaker to generate a .jad file from a .jar file.

              GALLERY|GALLERY2|CAMERA|TONES|TONES2|RECORDS|VIDEO|PLAYLIST|MEMORYCARD  file [-name
              name] [-protected] [-readonly] [-system] [-hidden] [-newtime]

       nokiaaddplaylists
              Goes through phone memory and generated playlist for all music files found.

              To manually manage playlists:

                 gammu addfile a:\\predefplaylist filename.m3u

              Will add playlist filename.m3u

                 gammu getfilesystem

              Will get list of all files (including names of files with playlists)

                 gammu deletefiles a:\\predefplaylist\\filename.m3u

              Will delete playlist filename.m3u

              Format of m3u playlist is easy (standard mp3 playlist):

              First  line  is  #EXTM3U,  next  lines  contain   names  of  files   (b:\file1.mp3,
              b:\folder1\file2.mp3,  etc.).  File needs t have \r\n terminated lines. So just run
              unix2dos on the resulting file before uploading it your your phone.

       nokiacomposer file
              Show, how to enter RTTL ringtone in composer existing in many Nokia phones (and how
              should it look like).

       nokiadebug filename [[v11-22] [,v33-44]...]

       nokiadisplayoutput

       nokiadisplaytest number

       nokiagetadc

       nokiagetoperatorname
              6110.c  phones  have  place  for name for one GSM network (of course, with flashing
              it's possible to change all names, but Gammu is not flasher ;-)). You can get  this
              name using this option.

       nokiagetpbkfeatures memorytype

       nokiagett9
              This option should display T9 dictionary content from DCT4 phones.

       nokiagetvoicerecord location
              Get  voice  record from location and save to WAV file. File is coded using GSM 6.10
              codec (available for example in win32). Name of file is like name of  voice  record
              in phone.

              Created  WAV  files require GSM 6.10 codec to be played. In Win XP it's included by
              Microsoft. If you deleted it by accident in this operating system, make such steps:

              1.  Control Panel

              2.  Add hardware

              3.  click Next

              4.  select "Yes. I have already connected the hardware

              5.  select "Add a new hardware device

              6.  select "Install the hardware that I manually select from a list

              7.  select "Sound, video and game controllers

              8.  select "Audio codecs

              9.  select "windows\system32" directory and file "mmdriver.inf

              10. if You will be asked for file msgsm32.acm, it should unpacked from Windows CD

              11. now You can be asked if want to install unsigned  driver  (YES),  about  select
                  codec configuration (select what you want) and rebotting PC (make it)

       nokiamakecamerashoot

       nokianetmonitor test
              Takes output or set netmonitor for Nokia DCT3 phones.

                 See also

                        For  more  info  about  this  option, please visit Marcin's page and read
                        netmonitor manual there.

              NOTE:
                 test 243 enables all tests (after using command  gammu  nokianetmonitor  243  in
                 some phones like 6210 or 9210 have to reboot them to see netmonitor menu)

       nokianetmonitor36
              Reset counters from netmonitor test 36 in Nokia DCT3 phones.

                 See also

                        For  more  info  about  this  option, please visit Marcin's page and read
                        netmonitor manual there.

       nokiasecuritycode
              Get/reset to "12345" security code

       nokiaselftests
              Perform tests for Nokia DCT3 phones.

              NOTE:
                 EEPROM test can show an error when your phone  has  an  EEPROM  in  flash  (like
                 82xx/7110/62xx/33xx).  The  clock test will show an error when the phone doesn?t
                 have an internal battery for the clock (like 3xxx).

       nokiasetlights keypad|display|torch on|off

       nokiasetoperatorname [networkcode name]

       nokiasetphonemenus
              Enable all (?) possible menus for DCT3 Nokia phones:

              1. ALS (Alternative Line Service) option menu

              2. vibra menu for 3210

              3. 3315 features in 3310 5.45 and higher

              4. two additional games (React and Logic) for 3210 5.31 and higher

              5. WellMate menu for 6150

              6. NetMonitor

              and for DCT4:

              1. ALS (Alternative Line Service) option menu

              2. Bluetooth, WAP bookmarks and settings menu, ... (6310i)

              3. GPRS Always Online

              4. and others...

       nokiasetvibralevel level
              Set vibra power to "level" (given in percent)

       nokiatuneradio

       nokiavibratest

   Siemens specific commands
       siemensnetmonact netmon_type
              Enables network monitor in Siemens phone. Currently known values for type are 1 for
              full and 2 for simple mode.

       siemensnetmonitor test

       siemenssatnetmon

   Network commands
       getgprspoint start [stop]

       listnetworks [country]
              Show names/codes of GSM networks known for Gammu

       networkinfo
              Show information about network status from the phone.

       setautonetworklogin

   WAP settings and bookmarks commands
       deletewapbookmark start [stop]
              Delete WAP bookmarks from phone.

              Locations are numerated from 1.

       getchatsettings start [stop]

       getsyncmlsettings start [stop]

       getwapbookmark start [stop]
              Get WAP bookmarks from phone.

              Locations are numerated from 1.

       getwapsettings start [stop]
              Get WAP settings from phone.

              Locations are numerated from 1.

   MMS and MMS settings commands
       getallmms [-save]

       geteachmms [-save]

       getmmsfolders

       getmmssettings start [stop]

       readmmsfile file [-save]

   FM radio commands
       getfmstation start [stop]
              Show info about FM stations in phone

   Phone information commands
       battery
              Displays information about battery and power source.

       getdisplaystatus

       getlocation
              Gets  network  information  from  phone  (same  as networkinfo) and prints location
              (latitude and longitude) based on information from OpenCellID.

       getsecuritystatus
              Show, if phone wait for security code (like PIN, PUK, etc.) or not

       identify
              Show the most important phone data.

       monitor [times]
              Retrieves phone status and writes it continuously to standard output. Press  Ctrl+C
              to interrupt this command.

              If  no parameter is given, the program runs until interrupted, otherwise only given
              number of iterations is performed.

              This command outputs almost all information Gammu supports:

              · Number of contacts, calendar and todo entries, messages, calls, etc.

              · Signal strength.

              · Battery state.

              · Currently used network.

              · Notifications of incoming messages and calls.

   Phone settings commands
       getcalendarsettings
              Displays calendar settings like first day of week  or  automatic  deleting  of  old
              entries.

       getprofile start [stop]

       resetphonesettings PHONE|DEV|UIF|ALL|FACTORY

              WARNING:
                 This will delete user data, be careful.

              Reset phone settings.

              PHONE  Clear phone settings.

              DEV    Clear device settings.

              ALL    Clear user settings.

                     · removes or set logos to default

                     · set default phonebook and other menu settings

                     · clear T9 words,

                     · clear call register info

                     · set default profiles settings

                     · clear user ringtones

              UIF    Clear user settings and disables hidden menus.

                     · changes like after ALL

                     · disables netmon and PPS (all "hidden" menus)

              FACTORY
                     Reset to factory defaults.

                     · changes like after UIF

                     · clear date/time

   Dumps decoding commands
       NOTE:
          These commands are available only if Gammu was compiled with debugging options.

       decodebinarydump file [phonemodel]
              Decodes a dump made by Gammu with LogFormat set to binary.

       decodesniff MBUS2|IRDA file [phonemodel]
              Allows one to decode sniffs. See Discovering protocol for more details.

   Other commands
       entersecuritycode PIN|PUK|PIN2|PUK2|PHONE|NETWORK code|- [newpin|-]
              Allow one to enter security code from PC. When code is -, it is read from stdin.

              In case entering PUK, some phones require you to set new PIN as well.

       presskeysequence mMnNpPuUdD+-123456789*0#gGrR<>[]hHcCjJfFoOmMdD@
              Press specified key sequence on phone keyboard

              mM     Menu

              nN     Names key

              pP     Power

              uU     Up

              dD     Down

              +-     +-

              gG     Green

              rR     Red

              123456789*0#
                     numeric keyboard

       reset SOFT|HARD
              Make phone reset:

              SOFT   without asking for PIN

              HARD   with asking for PIN

              NOTE:
                 Some phones will ask for PIN even with SOFT option.

              WARNING:
                 Some phones will reset user data on HARD reset.

       screenshot filename
              Captures  phone screenshot and saves it as filename. The extension is automatically
              appended to filename based on what data phone provides.

   Batch mode commands
       batch [file]
              Starts Gammu in a batch mode. In this mode you can issue several commands  each  on
              one line. Lines starting with # are treated as a comments.

              By default, commands are read from standard input, but you can optionally specify a
              file from where they would be read (special case - means standard input).

   Configuration commands
       searchphone [-debug]
              Attempts to search for a connected phone.

              WARNING:
                 Please note that this can take a very long time, but in case you  have  no  clue
                 how  to  configure  phone  connection,  this is a convenient way to find working
                 setup for Gammu.

       install [-minimal]
              Installs applet for currently configured connection to the phone.

              You can configure search path for instllation files by DataPath.

              The -minimal parameter forces installation of applet only without possible  support
              libraries, this can be useful for updates.

   Gammu information commands
       checkversion [STABLE]
              Checks  whether  there  is  newer Gammu version available online (if Gammu has been
              compiled with CURL). If you pass additional parameter STABLE, only stable  versions
              will be checked.

       features
              Print information about compiled in features.

       help [topic]
              Print  help.  By  default  general help is printed, but you can also specify a help
              category to get more detailed help on some topic.

       version
              Print version information and license.

RETURN VALUES

       gammu returns 0 on success. In case of failure non zero code is returned.

       1      Out of memory or other critical error.

       2      Invalid command line parameters.

       3      Failed to open file specified on command line.

       4      Program was interrupted.

       98     Gammu library version mismatch.

       99     Functionality has been moved. For example to gammu-smsd.

       Errors codes greater than 100 map to the GSM_Error values increased by 100:

       101    No error.

       102    Error opening device. Unknown, busy or no permissions.

       103    Error opening device, it is locked.

       104    Error opening device, it doesn't exist.

       105    Error opening device, it is already opened by other application.

       106    Error opening device, you don't have permissions.

       107    Error opening device. No required driver in operating system.

       108    Error opening device. Some hardware not connected/wrongly configured.

       109    Error setting device DTR or RTS.

       110    Error setting device speed. Maybe speed not supported.

       111    Error writing to the device.

       112    Error during reading from the device.

       113    Can't set parity on the device.

       114    No response in specified timeout. Probably phone not connected.

       115    Frame not requested right now. See <http://wammu.eu/support/bugs/> for  information
              how to report it.

       116    Unknown  response  from  phone. See <http://wammu.eu/support/bugs/> for information
              how to report it.

       117    Unknown frame. See <http://wammu.eu/support/bugs/> for information  how  to  report
              it.

       118    Unknown connection type string. Check config file.

       119    Unknown model type string. Check config file.

       120    Some   functions  not  available  for  your  system  (disabled  in  config  or  not
              implemented).

       121    Function not supported by phone.

       122    Entry is empty.

       123    Security error. Maybe no PIN?

       124    Invalid location. Maybe too high?

       125    Functionality not implemented. You are welcome to help authors with it.

       126    Memory full.

       127    Unknown error.

       128    Can not open specified file.

       129    More memory required...

       130    Operation not allowed by phone.

       131    No SMSC number given. Provide it manually or use the one configured in phone.

       132    You're inside phone menu (maybe editing?). Leave it and try again.

       133    Phone is not connected.

       134    Function is currently being implemented.  If  you  want  to  help,  please  contact
              authors.

       135    Phone is disabled and connected to charger.

       136    File format not supported by Gammu.

       137    Nobody  is  perfect,  some  bug appeared in protocol implementation. Please contact
              authors.

       138    Transfer was canceled by phone, maybe you pressed cancel on phone.

       139    Phone module need to send another answer frame.

       140    Current connection type doesn't support called function.

       141    CRC error.

       142    Invalid date or time specified.

       143    Phone memory error, maybe it is read only.

       144    Invalid data given to phone.

       145    File with specified name already exists.

       146    File with specified name doesn't exist.

       147    You have to give folder name and not file name.

       148    You have to give file name and not folder name.

       149    Can not access SIM card.

       150    Wrong GNAPPLET version in phone. Use version from currently used Gammu.

       151    Only part of folder has been listed.

       152    Folder must be empty.

       153    Data were converted.

       154    Gammu is not configured.

       155    Wrong folder used.

       156    Internal phone error.

       157    Error writing file to disk.

       158    No such section exists.

       159    Using default values.

       160    Corrupted data returned by phone.

       161    Bad feature string in configuration.

       162    Desired functionality has been disabled on compile time.

       163    Bluetooth configuration requires channel option.

       164    Service is not running.

       165    Service configuration is missing.

       166    Command rejected because device was busy. Wait and restart.

       167    Could not connect to the server.

       168    Could not resolve the host name.

       169    Failed to get SMSC number from phone.

       170    Operation aborted.

       171    Installation data not found, please consult debug log and/or documentation for more
              details.

       172    Entry is read only.

EXAMPLES

   Configuration
       To  check  it  out,  you  need  to have configuration file for gammu, see gammurc for more
       details about it.

   Sending messages
       NOTE:
          All messages bellow are sent to number 123456, replace it with proper destination.

       Send text message up to standard 160 chars:

          echo "All your base are belong to us" | gammu sendsms TEXT 123456

       or

          gammu sendsms TEXT 123456 -text "All your base are belong to us"

       Send long text message:

          echo "All your base are belong to us" | gammu sendsms TEXT 123456 -len 400

       or

          gammu sendsms TEXT 123456 -len 400 -text "All your base are belong to us"

       or

          gammu sendsms EMS 123456 -text "All your base are belong to us"

       Send some funky message with predefined sound and animation from 2 bitmaps:

          gammu sendsms EMS 123456 -text "Greetings" -defsound 1 -text "from Gammu -tone10 axelf.txt -animation 2 file1.bmp file2.bmp

       Send protected message with ringtone:

          gammu sendsms EMS 123456 -protected 2 -variablebitmaplong ala.bmp -toneSElong axelf.txt -toneSE ring.txt

   Retrieving USSD replies
       For example for retrieving prepaid card status or retrieving various network info:

          gammu getussd '#555#'

   Uploading files to Nokia
       Add Alien to applications in your phone (you need to have files Alien.JAD and Alien.JAR in
       current directory):

          gammu nokiaaddfile APPLICATION Alien

       Add file.mid to ringtones folder:

          gammu nokiaaddfile TONES file.mid

   Setting operator logo
       Set logo for network 230 03 (Vodafone CZ):

          gammu setbitmap OPERATOR ala.bmp "230 03"

   Converting file formats
       The formats conversion can done using gammu savefile or gammu convertbackup commands.

       Convert single entry (at position 260) from gammu-backup to vCalendar:

          gammu savefile CALENDAR output.vcs myCalendar.backup 260

       Convert first phonebook entry from gammu-backup to vCard:

          gammu savefile VCARD21 output.vcf phone.backup ME 1

       Convert all contacts from backup to vCard:

          gammu convertbackup phone.backup output.vcf

   Reporting bugs
       There are definitely many bugs, reporting to author is welcome. Please include some useful
       information when sending bug  reports  (especially  debug  logs,  operating  system,  it's
       version and phone information are needed).

       To generate debug log, enable it in gammurc:

          [gammu]
          YOUR CONNECTION SETTINGS
          logfile = /tmp/gammu.log
          logformat = textall

       Alternatively you can specify logging on command line:

          gammu -d textall -f /tmp/gammu.log ...

       With  this settings, Gammu generates /tmp/gammu.log on each connection to phone and stores
       dump of communication there. You can also find some hints for improving support  for  your
       phone in this log.

       See <http://wammu.eu/support/bugs/> for more information on reporting bugs.

       Please report bugs to Gammu bug tracker.

AUTHOR

       Michal Čihař <michal@cihar.com>

COPYRIGHT

       2009-2012, Michal Čihař <michal@cihar.com>