Provided by: mc-data_4.8.11-1_all bug

NAME

       mc - Visual shell for Unix-like systems.

USAGE

       mc [-abcCdfhPstuUVx] [-l log] [dir1 [dir2]] [-e [file] ...] [-v file]

DESCRIPTION

       GNU  Midnight  Commander  is  a  directory  browser/file  manager  for Unix-like operating
       systems.

OPTIONS

       -a, --stickchars
              Disable usage of graphic characters for line drawing.

       -b, --nocolor
              Force black and white display.

       -c, --color
              Force color mode, please check the section Colors for more information.

       -C arg, --colors=arg
              Specify a different color set in the command line.  The format of arg is documented
              in the Colors section.

       --configure-options
              Display configure options.

       -d, --nomouse
              Disable mouse support.

       -D N, --debuglevel=N
              Save the debug level for SMB VFS. N is in 0-10 range.

       -e [file], --edit[=file]
              Start the internal editor.  If the file is specified, open it on startup.  See also
              mcedit (1).

       -f, --datadir
              Display the compiled-in search paths for Midnight Commander files.

       -F, --datadir-info
              Display extended info about compiled-in paths for Midnight Commander.

       -g, --oldmouse
              Force a "normal tracking" mouse mode. Used when running on xterm-capable  terminals
              (tmux/screen).

       -k, --resetsoft
              Reset  softkeys to their default from the termcap/terminfo database. Only useful on
              HP terminals when the function keys don't work.

       -K file, --keymap=file
              Specify a name of keymap file in the command line.

       -l file, --ftplog=file
              Save the ftpfs dialog with the server in file.

       --nokeymap
              Don't load key bindings from any file, use default hardcoded keys.

       -P file, --printwd=file
              Print the last working directory to the specified file.  This option is  not  meant
              to  be  used  directly.   Instead,  it's  used  from  a  special  shell script that
              automatically changes the current directory of the shell to the last directory  the
              Midnight  Commander was in.  Source the file /usr/lib/mc/mc.sh (bash and zsh users)
              or /usr/lib/mc.csh (tcsh users) respectively to  define  mc  as  an  alias  to  the
              appropriate shell script.

       -s, --slow
              Set  alternative mode drawing of frameworks.  If the section [Lines] is not filled,
              the symbol for the pseudographics frame is a space, otherwise the frame  characters
              are taken from follow params.

              You can redefine the following variables:

       lefttop
              left-top corner

       righttop
              right-top corner

       centertop
              center-top cross

       centerbottom
              center-bottom cross

       leftbottom
              left-bottom corner

       rightbottom
              right-bottom corner

       leftmiddle
              left-middle cross

       rightmiddle
              right-middle cross

       centermiddle
              center cross

       horiz  default horizontal line

       vert   default vertical line

       thinhoriz
              thin horizontal line

       thinvert
              thin vertical line

       -S arg, --skin=arg
              Specify  a  name  of skin in the command line. Technology of skins is documented in
              the Skins section.

       -t, --termcap
              Used only if the code was compiled with Slang and terminfo: it makes  the  Midnight
              Commander  use  the  value  of  the  TERMCAP  variable for the terminal information
              instead of the information on the system wide terminal database

       -u, --nosubshell
              Disable use of the concurrent shell (only makes sense if the Midnight Commander has
              been built with concurrent shell support).

       -U, --subshell
              Enable  use  of  the  concurrent  shell  support  (only makes sense if the Midnight
              Commander was built with the subshell support set as an optional feature).

       -v file, --view=file
              Start the internal viewer to view the specified file.  See also mcview (1).

       -V, --version
              Display the version of the program.

       -x, --xterm
              Force xterm mode.  Used when running on xterm-capable terminals (two screen  modes,
              and able to send mouse escape sequences).

       -X, --no-x11
              Do not use X11 to get the state of modifiers Alt, Ctrl, Shift

       If  both  paths  are specified, the first path name is the directory to show in the active
       panel; the second path name is the directory to be shown in the other panel.

       If one path is specified, the path name is the directory to  show  in  the  active  panel;
       value of "other_dir" from panels.ini is the directory to be shown in the passive panel.

       If  no  paths  are  specified,  current  directory  is shown in the active panel; value of
       "other_dir" from panels.ini is the directory to be shown in the passive panel.

Overview

       The screen of the Midnight Commander is divided into four parts.  Almost all of the screen
       space is taken up by two directory panels.  By default, the second line from the bottom of
       the screen is the shell command line, and the bottom line shows the function  key  labels.
       The  topmost line is the menu bar line.  The menu bar line may not be visible, but appears
       if you click the topmost line with the mouse or press the F9 key.

       The Midnight Commander provides a view of two directories at the same  time.  One  of  the
       panels  is  the  current  panel  (a  selection  bar  is  in the current panel). Almost all
       operations take place on the current panel. Some file operations like Rename and  Copy  by
       default  use  the  directory  of  the unselected panel as a destination (don't worry, they
       always ask you for confirmation first). For more information,  see  the  sections  on  the
       Directory Panels, the Left and Right Menus and the File Menu.

       You  can  execute  system  commands  from  the  Midnight  Commander by simply typing them.
       Everything you type will appear on the shell command line, and when you  press  Enter  the
       Midnight  Commander  will  execute the command line you typed; read the Shell Command Line
       and Input Line Keys sections to learn more about the command line.

Mouse Support

       The Midnight Commander comes with mouse support.  It is activated whenever you are running
       on  an  xterm(1) terminal (it even works if you take a telnet, ssh or rlogin connection to
       another machine from the xterm) or if you are running on a Linux console and have the  gpm
       mouse server running.

       When you left click on a file in the directory panels, that file is selected; if you click
       with the right button, the file is marked (or unmarked, depending on the previous state).

       Double-clicking on a file will try to execute the command if it is an executable  program;
       and  if the extension file has a program specified for the file's extension, the specified
       program is executed.

       Also, it is possible to execute the commands  assigned  to  the  function  key  labels  by
       clicking on them.

       The  default  auto  repeat  rate  for  the  mouse buttons is 400 milliseconds. This may be
       changed  to  other  values  by  editing  the  ~/.config/mc/ini  file  and   changing   the
       mouse_repeat_rate parameter.

       If  you are running the Midnight Commander with the mouse support, you can get the default
       mouse behavior (cutting and pasting text) by holding down the Shift key.

Keys

       Some commands in the Midnight Commander involve the use of the Control (sometimes  labeled
       CTRL  or CTL) and the Meta (sometimes labeled ALT or even Compose) keys. In this manual we
       will use the following abbreviations:

       C-<chr>
              means hold the Control key while typing the character <chr>.  Thus  C-f  would  be:
              hold the Control key and type f.

       Alt-<chr>
              means hold the Meta or Alt key down while typing <chr>.  If there is no Meta or Alt
              key, type ESC, release it, then type the character <chr>.

       S-<chr>
              means hold the Shift key down while typing <chr>.

       All input lines in the Midnight Commander use an approximation to the GNU  Emacs  editor's
       key bindings (default).

       You may redefine key bindings. See redefine hotkey bindings

       for  more  info.  All  other  key  bindings (described in this manual) relative to default
       behavior.

       There are many sections which tell about the keys. The following are the most important.

       The File Menu section documents the keyboard shortcuts for the commands appearing  in  the
       File  menu.  This  section includes the function keys. Most of these commands perform some
       action, usually on the selected file or the tagged files.

       The Directory Panels section documents the keys which select a file  or  tag  files  as  a
       target for a later action (the action is usually one from the file menu).

       The  Shell  Command  Line  section  list  the keys which are used for entering and editing
       command lines. Most of these copy file names and such from the  directory  panels  to  the
       command line (to avoid excessive typing) or access the command line history.

       Input Line Keys are used for editing input lines. This means both the command line and the
       input lines in the query dialogs.

  Redefine hotkey bindings
       Hotkey bindings may  be  read  from  external  file  (keymap-file).   Initially,  Mignight
       Commander  creates  key  bindings using keymap defined in the source code. Then, two files
       /usr/share/mc/mc.keymap and /etc/mc/mc.keymap are loaded always,  sequentially  reassigned
       key  bindings  defined  earlier.   User-defined  keymap-file  is searched on the following
       algorithm (to the first one found):

              1) command line option -K <keymap> or --keymap=<keymap>
              2) Environment variable MC_KEYMAP
              3) Parameter keymap in section [Midnight-Commander] of config file.
              4) File ~/.config/mc/mc.keymap

       Command line option, environment variable and parameter in config  file  may  contain  the
       absolute  path  to  the  keymap-file (with the extension .keymap or without it). Search of
       keymap-file will occur in (to the first one found):

              1) ~/.config/mc
              2) /etc/mc/
              3) /usr/share/mc/

  Miscellaneous Keys
       Here are some keys which don't fall into any of the other categories:

       Enter  if there is some text in the command line (the one at the bottom  of  the  panels),
              then  that command is executed. If there is no text in the command line then if the
              selection bar is over a directory the Midnight Commander does  a  chdir(2)  to  the
              selected directory and reloads the information on the panel; if the selection is an
              executable file then it is executed. Finally, if the extension of the selected file
              name  matches  one  of the extensions in the extensions file then the corresponding
              command is executed.

       C-l    repaint all the information in the Midnight Commander.

       C-x c  run the Chmod command on a file or on the tagged files.

       C-x o  run the Chown command on the current file or on the tagged files.

       C-x l  run the hard link command.

       C-x s  run the absolute symbolic link command.

       C-x v  run the relative symbolic  link  command.  See  the  File  Menu  section  for  more
              information about symbolic links.

       C-x i  set the other panel display mode to information.

       C-x q  set the other panel display mode to quick view.

       C-x !  execute the External panelize command.

       C-x h  run the add directory to hotlist command.

       Alt-!  executes the Filtered view command, described in the view command.

       Alt-?  executes the Find file command.

       Alt-c  pops up the quick cd dialog.

       C-o    when the program is being run in the Linux or FreeBSD console or under an xterm, it
              will show you the output of the previous command.  When ran on the  Linux  console,
              the  Midnight  Commander uses an external program (cons.saver) to handle saving and
              restoring of information on the screen.

       When the subshell support is compiled in, you can type C-o at any time  and  you  will  be
       taken  back to the Midnight Commander main screen, to return to your application just type
       C-o.  If you have an application suspended by using this  trick,  you  won't  be  able  to
       execute  other  programs  from  the  Midnight  Commander until you terminate the suspended
       application.

  Directory Panels
       This section lists the keys which operate on the directory panels. If you want to know how
       to change the appearance of the panels take a look at the section on Left and Right Menus.

       Tab, C-i
              change the current panel. The old other panel becomes the new current panel and the
              old current panel becomes the new other panel. The selection bar moves from the old
              current panel to the new current panel.

       Insert, C-t
              to  tag  files  you may use the Insert key (the kich1 terminfo sequence).  To untag
              files, just retag a tagged file.

       M-e    to change charset of panel you may use M-e (Alt-e).  Recoding is made from selected
              codepage into system codepage. To cancel the recoding you may select "directory up"
              (..) in active panel.  To cancel  the  charsets  in  all  directories,  select  "No
              translation " in the dialog of encodings.

       Alt-g, Alt-r, Alt-j
              used  to  select  the  top  file  in  a  panel, the middle file and the bottom one,
              respectively.

       Alt-t  toggle the current display listing to show the next  display  listing  mode.   With
              this  it is possible to quickly switch to brief listing, long listing, user defined
              listing mode, and back to the default.

       C-\ (control-backslash)
              show the directory hotlist and change to the selected directory.

       +  (plus)
              this is used to select (tag) a group of files.  The Midnight Commander will  prompt
              for  a  selection  options.  When  Files  only  checkbox  is on, only files will be
              selected.  If Files only is off, as files as directories will  be  selected.   When
              Shell  Patterns  checkbox  is  on, the regular expression is much like the filename
              globbing in the shell (* standing for zero or more characters and  ?  standing  for
              one  character).  If  Shell Patterns is off, then the tagging of files is done with
              normal regular expressions (see ed (1)). When Case sensitive checkbox  is  on,  the
              selection  will  be  case sensitive characters.  If Case sensitive is off, the case
              will be ignored.

       \ (backslash)
              use the "\" key to unselect a group of files. This is the opposite of the Plus key.

       up-key, C-p
              move the selection bar to the previous entry in the panel.

       down-key, C-n
              move the selection bar to the next entry in the panel.

       home, a1, Alt-<
              move the selection bar to the first entry in the panel.

       end, c1, Alt->
              move the selection bar to the last entry in the panel.

       next-page, C-v
              move the selection bar one page down.

       prev-page, Alt-v
              move the selection bar one page up.

       Alt-o  If the currently selected file is a directory, load that  directory  on  the  other
              panel  and  moves the selection to the next file. If the currently selected file is
              not a directory, load the parent  directory  on  the  other  panel  and  moves  the
              selection to the next file.

       Alt-i  make  the  current directory of the current panel also the current directory of the
              other panel.  Put the other panel to the listing mode if needed.   If  the  current
              panel is panelized, the other panel doesn't become panelized.

       C-PageUp, C-PageDown
              only  when  supported by the terminal: change to ".." and to the currently selected
              directory respectively.

       Alt-y  moves to the previous directory in the history, equivalent to clicking the  <  with
              the mouse.

       Alt-u  moves  to  the next directory in the history, equivalent to clicking the > with the
              mouse.

       Alt-Shift-h, Alt-H
              displays the directory history, equivalent to depressing the 'v' with the mouse.

  Quick search
       The Quick search mode allows you to perform fast file search in file panel.  Press C-s  or
       Alt-s to start a filename search in the directory listing.

       When  the  search  is active, the user input will be added to the search string instead of
       the command line. If the Show mini-status option is enabled the search string is shown  on
       the  mini-status  line. When typing, the selection bar will move to the next file starting
       with the typed letters. The Backspace or DEL keys can be used to correct typing  mistakes.
       If C-s is pressed again, the next match is searched for.

       If  quick search is started with double pressing of C-s, the previous quick search pattern
       will be used for current search.

       Besides the filename characters, you can also use wildcard characters '*' and '?'.

  Shell Command Line
       This section lists keys which are useful to avoid excessive  typing  when  entering  shell
       commands.

       Alt-Enter
              copy the currently selected file name to the command line.

       C-Enter
              same a Alt-Enter.  May not work on remote systems and some terminals.

       C-Shift-Enter
              copy  the  full  path name of the currently selected file to the command line.  May
              not work on remote systems and some terminals.

       Alt-Tab
              does the filename, command, variable, username and hostname completion for you.

       C-x t, C-x C-t
              copy the tagged files (or if there are no tagged files, the selected file)  of  the
              current panel (C-x t) or of the other panel (C-x C-t) to the command line.

       C-x p, C-x C-p
              the  first  key  sequence copies the current path name to the command line, and the
              second one copies the unselected panel's path name to the command line.

       C-q    the quote command can be used to insert characters that are  otherwise  interpreted
              by the Midnight Commander (like the '+' symbol)

       Alt-p, Alt-n
              use  these  keys to browse through the command history. Alt-p takes you to the last
              entry, Alt-n takes you to the next one.

       Alt-h  displays the history for the current input line.

  General Movement Keys
       The help viewer, the file viewer and the directory tree use common code to handle  moving.
       Therefore  they  accept  exactly the same keys. Each of them also accepts some keys of its
       own.

       Other parts of the Midnight Commander use some of the same movement keys, so this  section
       may be of use for those parts too.

       Up, C-p
              moves one line backward.

       Down, C-n
              moves one line forward.

       Prev Page, Page Up, Alt-v
              moves one page up.

       Next Page, Page Down, C-v
              moves one page down.

       Home, A1
              moves to the beginning.

       End, C1
              move to the end.

       The  help  viewer  and  the  file viewer accept the following keys in addition the to ones
       mentioned above:

       b, C-b, C-h, Backspace, Delete
              moves one page up.

       Space bar
              moves one page down.

       u, d   moves one half of a page up or down.

       g, G   moves to the beginning or to the end.

  Input Line Keys
       The input lines (they are used for the command line and  for  the  query  dialogs  in  the
       program) accept these keys:

       C-a    puts the cursor at the beginning of line.

       C-e    puts the cursor at the end of the line.

       C-b, move-left
              move the cursor one position left.

       C-f, move-right
              move the cursor one position right.

       Alt-f  moves one word forward.

       Alt-b  moves one word backward.

       C-h, Backspace
              delete the previous character.

       C-d, Delete
              delete the character in the point (over the cursor).

       C-@    sets the mark for cutting.

       C-w    copies  the  text  between the cursor and the mark to a kill buffer and removes the
              text from the input line.

       Alt-w  copies the text between the cursor and the mark to a kill buffer.

       C-y    yanks back the contents of the kill buffer.

       C-k    kills the text from the cursor to the end of the line.

       Alt-p, Alt-n
              Use these keys to browse through the command history. Alt-p takes you to  the  last
              entry, Alt-n takes you to the next one.

       Alt-C-h, Alt-Backspace
              delete one word backward.

       Alt-Tab
              does the filename, command, variable, username and hostname completion for you.

Menu Bar

       The  menu  bar  pops up when you press F9 or click the mouse on the top row of the screen.
       The menu bar has five menus: "Left", "File", "Command", "Options" and "Right".

       The Left and Right Menus allow you  to  modify  the  appearance  of  the  left  and  right
       directory panels.

       The  File  Menu  lists  the  actions you can perform on the currently selected file or the
       tagged files.

       The Command Menu lists the actions which are more general and  bear  no  relation  to  the
       currently selected file or the tagged files.

       The Options Menu lists the actions which allow you to customize the Midnight Commander.

  Left and Right (Above and Below) Menus
       The outlook of the directory panels can be changed from the Left and Right menus (they are
       named Above and Below when the horizontal panel split is chosen from  the  Layout  options
       dialog).

    Listing Mode...
       The  listing  mode  view  is  used to display a listing of files, there are four different
       listing modes available: Full, Brief, Long and User.  The full directory  view  shows  the
       file name, the size of the file and the modification time.

       The brief view shows only the file name and it has two columns (therefore showing twice as
       many files as other views). The long view is similar to the output of ls -l  command.  The
       long view takes the whole screen width.

       If you choose the "User" display format, then you have to specify the display format.

       The  user  display  format  must start with a panel size specifier.  This may be "half" or
       "full", and they specify a half screen panel and a full screen panel respectively.

       After the panel size, you may specify the two columns mode on the panel, this is  done  by
       adding the number "2" to the user format string.

       After  this  you add the name of the fields with an optional size specifier.  This are the
       available fields you may display:

       name   displays the file name.

       size   displays the file size.

       bsize  is an alternative form of the size format. It displays the size of  the  files  and
              for directories it just shows SUB-DIR or UP--DIR.

       type   displays  a  one  character  wide type field.  This character is similar to what is
              displayed by ls with the -F flag - * for executable files, / for directories, @ for
              links,  = for sockets, - for character devices, + for block devices, | for pipes, ~
              for symbolic links to directories and !   for  stale  symlinks  (links  that  point
              nowhere).

       mark   an asterisk if the file is tagged, a space if it's not.

       mtime  file's last modification time.

       atime  file's last access time.

       ctime  file's status change time.

       perm   a string representing the current permission bits of the file.

       mode   an octal value with the current permission bits of the file.

       nlink  the number of links to the file.

       ngid   the GID (numeric).

       nuid   the UID (numeric).

       owner  the owner of the file.

       group  the group of the file.

       inode  the inode of the file.

       Also you can use following keywords to define the panel layout:

       space  a space in the display format.

       |      add a vertical line to the display format.

       To  force  one  field  to  a fixed size (a size specifier), you just add : followed by the
       number of characters you want the field to have.  If the number is followed by the  symbol
       +, then the size specifies the minimal field size - if the program finds out that there is
       more space on the screen, it will then expand that field.

       For example, the Full display corresponds to this format:

       half type name | size | mtime

       And the Long display corresponds to this format:

       full perm space nlink space owner space group space size space mtime space name

       This is a nice user display format:

       half name | size:7 | type mode:3

       Panels may also be set to the following modes:

       Info   The info view display information related to the currently  selected  file  and  if
              possible information about the current file system.

       Tree   The tree view is quite similar to the directory tree feature. See the section about
              it for more information.

       Quick View
              In this mode, the panel will switch to a reduced viewer that displays the  contents
              of  the  currently  selected file, if you select the panel (with the tab key or the
              mouse), you will have access to the usual viewer commands.

    Sort Order...
       The eight sort orders are by name, by extension, by modification time, by access time, and
       by inode information modification time, by size, by inode and unsorted.  In the Sort order
       dialog box you can choose the sort order and you may also specify if you want to  sort  in
       reverse order by checking the reverse box.

       By  default  directories  are  sorted  before files but this can be changed from the Panel
       options menu (option Mix all files).

    Filter...
       The filter command allows you to specify a shell pattern (for example *.tar.gz) which  the
       files  must  match  to be shown. Regardless of the filter pattern, the directories and the
       links to directories are always shown in the directory panel.

    Reread
       The reread command reload the list of files in  the  directory.  It  is  useful  if  other
       processes have created or removed files.

  File Menu
       The Midnight Commander uses the F1 - F10 keys as keyboard shortcuts for commands appearing
       in the file menu.  The escape sequences for the function keys  are  terminfo  capabilities
       kf1  trough  kf10.   On  terminals  without function key support, you can achieve the same
       functionality by pressing the ESC key and then a number in the range 1  through  9  and  0
       (corresponding to F1 to F9 and F10 respectively).

       The File menu has the following commands (keyboard shortcuts in parentheses):

       Help (F1)

       Invokes  the  built-in  hypertext help viewer. Inside the help viewer, you can use the Tab
       key to select the next link and the Enter key to follow that  link.  The  keys  Space  and
       Backspace  are used to move forward and backward in a help page. Press F1 again to get the
       full list of accepted keys.

       Menu (F2)

       Invoke the user menu.  The user menu provides an easy way to provide users with a menu and
       add extra features to the Midnight Commander.

       View (F3, F13)

       View  the currently selected file. By default this invokes the Internal File Viewer but if
       the option "Use internal view" is off, it invokes an external file viewer specified by the
       VIEWER  environment  variable.   If VIEWER is undefined, the PAGER environment variable is
       tried.  If PAGER is also undefined, the  "view"  command  is  invoked.   If  you  use  F13
       instead,  the  viewer will be invoked without doing any formatting or preprocessing to the
       file.

       See parameters for external viewer for explain how you may  specify  an  extended  command
       line options for external viewers.

       Filtered View (Alt-!)

       This  command  prompts  for  a  command  and  its  arguments (the argument defaults to the
       currently selected file name), the output from such command is shown in the internal  file
       viewer.

       Edit (F4, F14)

       Press F4 to edit the highlighted file.  Press F14 (usually F14) to start the editor with a
       new, empty file.  Currently they invoke the vi editor, or  the  editor  specified  in  the
       EDITOR  environment  variable, or the Internal File Editor if the use_internal_edit option
       is on.

       See parameters for external editor for explain how you may  specify  an  extended  command
       line options for external editors.

       Copy (F5, F15)

       Press  F5  to  pop  up  an input dialog to copy the currently selected file (or the tagged
       files, if there is at least one file tagged) to the directory/filename you specify in  the
       input  dialog.  The destination defaults to the directory in the non-selected panel. Space
       for destination file may be preallocated relative to preallocate_space  configure  option.
       During  this  process, you can press C-c or ESC to abort the operation.  For details about
       source mask (which will be usually either * or ^\(.*\)$ depending on setting of Use  shell
       patterns) and possible wildcards in the destination see Mask copy/rename.

       F15  (usually  F15)  is  similar,  but defaults to the directory in the selected panel. It
       always operates on the selected file, regardless of any tagged files.

       On some systems, it is possible to do the copy  in  the  background  by  clicking  on  the
       background  button  (or pressing Alt-b in the dialog box).  The Background Jobs is used to
       control the background process.

       Link (C-x l)

       Create a hard link to the current file.

       Absolute symlink (C-x s)

       Create a absolute symbolic link to the current file.

       Relative symLink (C-x v)

       Create a relative symbolic link to the current file.

       To those of you who don't know what links are: creating a link to a file  is  a  bit  like
       copying  the file, but both the source filename and the destination filename represent the
       same file image. For example, if you edit one of these files, all changes  you  make  will
       appear in both files. Some people call links aliases or shortcuts.

       A  hard link appears as a real file. After making it, there is no way of telling which one
       is the original and which is the link. If you delete either one of them the other  one  is
       still  intact. It is very difficult to notice that the files represent the same image. Use
       hard links when you don't even want to know.

       A symbolic link is a reference to the name of the original file. If the original  file  is
       deleted  the symbolic link is useless. It is quite easy to notice that the files represent
       the same image. The Midnight Commander shows an "@"-sign in front of the file name  if  it
       is  a  symbolic  link to somewhere (except to directory, where it shows a tilde (~)).  The
       original file which the  link  points  to  is  shown  on  mini-status  line  if  the  Show
       mini-status  option  is  enabled.  Use symbolic links when you want to avoid the confusion
       that can be caused by hard links.

       When you press "C-x  s"  Midnight  Commander  will  automatically  fill  in  the  complete
       path+filename of the original file and suggest a name for the link.  You can change either
       one.

       Sometimes you may want to change the absolute path of the original into a  relative  path.
       An absolute path starts from the root directory:

       /home/frodo/mc/mc -> /home/frodo/new/mc

       A  relative  link describes the original file's location starting from the location of the
       link itself:

       /home/frodo/mc/mc -> ../new/mc

       You can force Midnight Commander to suggest a relative path by pressing "C-x v" instead of
       "C-x s".

       Rename/Move (F6, F16)

       Press  F6  to  pop  up  an input dialog to copy the currently selected file (or the tagged
       files, if there is at least one file tagged) to the directory/filename you specify in  the
       input  dialog.   The  destination defaults to the directory in the non-selected panel. For
       more details look at Copy (F5) operation above, most of the things are quite similar.

       F16 (usually F16) is similar, but defaults to the directory  in  the  selected  panel.  It
       always operates on the selected file, regardless of any tagged files.

       On  some  systems,  it  is  possible  to  do the copy in the background by clicking on the
       background button (or pressing Alt-b in the dialog box).  The Background Jobs is  used  to
       control the background process.

       Mkdir (F7)

       Pop up an input dialog and creates the directory specified.

       Delete (F8)

       Delete  the  currently  selected file or the tagged files in the currently selected panel.
       During the process, you can press C-c or ESC to abort the operation.

       Quick cd (Alt-c) Use the quick cd command if you have full command line  and  want  to  cd
       somewhere.

       Select group (+)

       This  is  used  to select (tag) a group of files. The Midnight Commander will prompt for a
       selection options. When Files only checkbox is on, only files will be selected.  If  Files
       only  is  off,  as files as directories will be selected.  When Shell Patterns checkbox is
       on, the regular expression is much like the filename globbing in the shell (* standing for
       zero or more characters and ?  standing for one character). If Shell Patterns is off, then
       the tagging of files is done with normal regular  expressions  (see  ed  (1)).  When  Case
       sensitive  checkbox  is  on,  the  selection  will  be case sensitive characters.  If Case
       sensitive is off, the case will be ignored.

       Unselect group (\)

       Used to unselect a group of files. This is the opposite of the Select group command.

       Quit (F10, Shift-F10)

       Terminate the Midnight Commander.  Shift-F10 is used when you want to  quit  and  you  are
       using  the  shell  wrapper.  Shift-F10 will not take you to the last directory you visited
       with the Midnight Commander, instead it will stay at the directory where you  started  the
       Midnight Commander.

    Quick cd
       This  command  is  useful if you have a full command line and want to cd somewhere without
       having to yank and paste the command line. This command pops up a small dialog, where  you
       enter  everything  you  would enter after cd on the command line and then you press enter.
       This features all the things that are already in the internal cd command.

  Command Menu
       The Directory tree command shows a tree figure of the directories.

       The "Find file" command allows you to search for a specific file.

       The "Swap panels" command swaps the contents of the two directory panels.

       The "Switch panels on/off" command shows the output of the last shell command.  This works
       only on xterm and on Linux and FreeBSD console.

       The  "Compare  directories" command compares the directory panels with each other. You can
       then use the Copy (F5) command to make the  panels  identical.  There  are  three  compare
       methods. The quick method compares only file size and file date. The thorough method makes
       a full byte-by-byte compare. The thorough method is not available if the machine does  not
       support  the  mmap(2)  system  call.   The size-only compare method just compares the file
       sizes and does not check the contents or the date times, it just checks the file size.

       The "External panelize" allows you to execute an external program, and make the output  of
       that program the contents of the current panel.

       The  "Command  history"  command  shows  a list of typed commands. The selected command is
       copied to the command line. The command history can also be accessed by  typing  Alt-p  or
       Alt-n.

       The  "Directory  hotlist"  command  makes  changing of the current directory to often used
       directories faster.

       The "Screen list" command shows a  dialog  window  with  the  list  of  currently  running
       internal editors, viewers and other MC modules that support this mode.

       The  "Edit extension file" command allows you to specify programs to executed when you try
       to execute, view, edit and do a bunch of other thing  on  files  with  certain  extensions
       (filename endings).

       The  "Edit  Menu  File"  command  may  be used for editing the user menu (which appears by
       pressing F2).

    Directory Tree
       The Directory Tree command shows a tree figure  of  the  directories.  You  can  select  a
       directory from the figure and the Midnight Commander will change to that directory.

       There  are  two ways to invoke the tree. The real directory tree command is available from
       Commands menu. The other way is to select tree view from the Left or Right menu.

       To get rid of long delays the Midnight Commander creates the tree figure by scanning  only
       a  small subset of all the directories. If the directory which you want to see is missing,
       move to its parent directory and press C-r (or F2).

       You can use the following keys:

       General movement keys are accepted.

       Enter.  In the directory tree, exits the directory tree and changes to this  directory  in
       the  current  panel.  In  the  tree view, changes to this directory in the other panel and
       stays in tree view mode in the current panel.

       C-r, F2 (Rescan).  Rescan this directory. Use this when the tree figure is out of date: it
       is missing subdirectories or shows some subdirectories which don't exist any more.

       F3  (Forget).  Delete this directory from the tree figure. Use this to remove clutter from
       the figure. If you want the directory back to the tree  figure  press  F2  in  its  parent
       directory.

       F4  (Static/Dynamic).  Toggle between the dynamic navigation mode (default) and the static
       navigation mode.

       In the static navigation mode you can use the Up and Down keys to select a directory.  All
       known directories are shown.

       In  the  dynamic  navigation  mode  you  can  use the Up and Down keys to select a sibling
       directory, the Left key to move to the parent directory, and the Right key to  move  to  a
       child  directory.  Only the parent, sibling and children directories are shown, others are
       left out. The tree figure changes dynamically as you traverse.

       F5 (Copy).  Copy the directory.

       F6 (RenMov).  Move the directory.

       F7 (Mkdir).  Make a new directory below this directory.

       F8 (Delete).  Delete this directory from the file system.

       C-s, Alt-s.  Search the next directory matching the search string. If  there  is  no  such
       directory these keys will move one line down.

       C-h, Backspace.  Delete the last character of the search string.

       Any  other  character.   Add  the  character  to  the  search  string and move to the next
       directory which starts with these characters. In the tree view you must first activate the
       search mode by pressing C-s. The search string is shown in the mini status line.

       The  following  actions are available only in the directory tree. They aren't supported in
       the tree view.

       F1 (Help).  Invoke the help viewer and show this section.

       Esc, F10.  Exit the directory tree. Do not change the directory.

       The mouse is supported. A double-click behaves like Enter. See also the section  on  mouse
       support.

    Find File
       The  Find  File feature first asks for the start directory for the search and the filename
       to be searched for. By pressing the Tree button you can select the  start  directory  from
       the directory tree figure.

       Option form whole words. Like grep -w.

       You  can  start the search by pressing the OK button.  During the search you can stop from
       the Stop button and continue from the Start button.

       You can browse the filelist with the up and down arrow keys. The Chdir button will  change
       to  the  directory  of  the  currently  selected  file.  The Again button will ask for the
       parameters for a new search. The Quit button quits  the  search  operation.  The  Panelize
       button  will  place  the  found  files  to  the current directory panel so that you can do
       additional operations on them (view, copy, move, delete and so on). After  panelizing  you
       can press C-r to return to the normal file listing.

       The 'Enable ignore directories' checkbox and input field below it allow to set up the list
       of directories that should be skip during the search files (for example, you may  want  to
       avoid searches on a CD-ROM or on a NFS directory that is mounted across a slow link). List
       components must be separated with a colon, here is an example:

       /cdrom:/nfs/wuarchive:/afs

       Relative paths are supported also.  The  following  example  shows  how  to  skip  special
       directories of version control systems:
       /cdrom:/nfs/wuarchive:/afs:.svn:.git:CVS

       Attention: input field can contain a dot (.), this means the current absolute path.

       You  may  consider  using  the  External  panelize  command for some operations. Find file
       command is for simple queries only, while using External panelize you can do as mysterious
       searches as you would like.

    External panelize
       The  External  panelize  allows you to execute an external program, and make the output of
       that program the contents of the current panel.

       For example, if you want to manipulate in one of the panels all the symbolic links in  the
       current directory, you can use external panelization to run the following command:

       find . -type l -print

       Upon  command  completion,  the  directory  contents  of  the  panel will no longer be the
       directory listing of the current directory, but all the files that are symbolic links.

       If you want to panelize all of the files that have been downloaded from your  FTP  server,
       you can use this awk command to extract the file name from the transfer log files:

       awk '$9 ~! /incoming/ { print $9 }' < /var/log/xferlog

       You  may  want  to save often used panelize commands under a descriptive name, so that you
       can recall them quickly. You do this by typing the command on the input line and  pressing
       Add  new  button. Then you enter a name under which you want the command to be saved. Next
       time, you just choose that command from the list and do not have to type it again.

    Hotlist
       The Directory hotlist command shows  the  labels  of  the  directories  in  the  directory
       hotlist.   The  Midnight  Commander  will  change  to  the  directory corresponding to the
       selected label.  From the hotlist dialog, you can remove already  created  label/directory
       pairs  and  add  new ones.  To add new directories quickly, you can use the Add to hotlist
       command (C-x h), which adds the current directory into the directory hotlist, asking  just
       for the label for the directory.

       This makes cd to often used directories faster. You may consider using the CDPATH variable
       as described in internal cd command description.

    Edit Extension File
       This will invoke your editor on the file ~/.config/mc/mc.ext.  The  format  of  this  file
       following:

       All lines starting with # or empty lines are thrown away.

       Lines starting in the first column should have following format:

       keyword/expr, i.e. everything after the slash until new line is expr.

       keyword can be:

       shell  -  expr  is  an extension (no wildcards).  File matches it its name ends with expr.
              Example: shell/.tar matches *.tar.

       regex  - expr is a regular expression.  File matches  if  its  name  matches  the  regular
              expression.

       directory
              -  expr  is  a  regular expression.  File matches if it is a directory and its name
              matches the regular expression.

       type   - expr is a regular expression.  File matches if the output of file %f without  the
              initial "filename:" part matches regular expression expr.

       default
              - matches any file.  expr is ignored.

       include
              - denotes a common section.  expr is the name of the section.

       Other  lines should start with a space or tab and should be of the format: keyword=command
       (with no spaces around =), where keyword should be:  Open  (invoked  on  Enter  or  double
       click),  View  (F3), Edit (F4) or Include (to add rules from the common section).  command
       is any one-line shell command, with the simple macro substitution.

       Rules are matched from top to bottom, thus the order is  important.   If  the  appropriate
       action  is  missing, search continues as if this rule didn't match (i.e. if a file matches
       the first and second entry and View action is missing in the first one, then  on  pressing
       F3  the  View  action  from  the second entry will be used).  default should match all the
       actions.

    Background Jobs
       This lets you control the state of any background Midnight Commander  process  (only  copy
       and  move files operations can be done in the background).  You can stop, restart and kill
       a background job from here.

    Edit Menu File
       The user menu is a menu of useful actions that can be customized by  the  user.  When  you
       access  the  user menu, the file .mc.menu from the current directory is used if it exists,
       but only if it is owned by user or root and is not world-writable.  If no such file found,
       ~/.config/mc/menu  is tried in the same way, and otherwise mc uses the default system-wide
       menu /usr/share/mc/mc.menu.

       The format of the menu file is very simple. Lines that start with anything  but  space  or
       tab are considered entries for the menu (in order to be able to use it like a hot key, the
       first character should be a letter). All the lines that start with a space or  a  tab  are
       the commands that will be executed when the entry is selected.

       When  an  option is selected all the command lines of the option are copied to a temporary
       file in the temporary directory (usually /usr/tmp) and then that file  is  executed.  This
       allows  the  user  to  put  normal  shell  constructs  in  the  menus.  Also  simple macro
       substitution takes place before executing the menu code. For more information,  see  macro
       substitution.

       Here is a sample mc.menu file:

       A    Dump the currently selected file
            od -c %f

       B    Edit a bug report and send it to root
            I=`mktemp ${MC_TMPDIR:-/tmp}/mail.XXXXXX` || exit 1
            vi $I
            mail -s "Midnight Commander bug" root < $I
            rm -f $I

       M    Read mail
            emacs -f rmail

       N    Read Usenet news
            emacs -f gnus

       H    Call the info hypertext browser
            info

       J    Copy current directory to other panel recursively
            tar cf - . | (cd %D && tar xvpf -)

       K    Make a release of the current subdirectory
            echo -n "Name of distribution file: "
            read tar
            ln -s %d `dirname %d`/$tar
            cd ..
            tar cvhf ${tar}.tar $tar

       = f *.tar.gz | f *.tgz & t n
       X       Extract the contents of a compressed tar file
            tar xzvf %f

       Default Conditions

       Each  menu  entry  may be preceded by a condition. The condition must start from the first
       column with a '=' character. If the condition is true, the menu entry will be the  default
       entry.

       Condition syntax:   = <sub-cond>
         or:               = <sub-cond> | <sub-cond> ...
         or:               = <sub-cond> & <sub-cond> ...

       Sub-condition is one of following:

         y <pattern>       syntax of current file matching pattern?
                      (for edit menu only)
         f <pattern>       current file matching pattern?
         F <pattern>       other file matching pattern?
         d <pattern>       current directory matching pattern?
         D <pattern>       other directory matching pattern?
         t <type>          current file of type?
         T <type>          other file of type?
         x <filename>      is it executable filename?
         ! <sub-cond>      negate the result of sub-condition

       Pattern is a normal shell pattern or a regular expression, according to the shell patterns
       option. You can override the  global  value  of  the  shell  patterns  option  by  writing
       "shell_patterns=x" on the first line of the menu file (where "x" is either 0 or 1).

       Type is one or more of the following characters:

         n  not a directory
         r  regular file
         d  directory
         l  link
         c  character device
         b  block device
         f  FIFO (pipe)
         s  socket
         x  executable file
         t  tagged

       For  example  'rlf'  means  either  regular  file,  link or fifo. The 't' type is a little
       special because it acts on the panel instead of the file. The condition '=t t' is true  if
       there are tagged files in the current panel and false if not.

       If  the condition starts with '=?' instead of '=' a debug trace will be shown whenever the
       value of the condition is calculated.

       The conditions are calculated from left to right. This means
            = f *.tar.gz | f *.tgz & t n
       is calculated as
            ( (f *.tar.gz) | (f *.tgz) ) & (t n)

       Here is a sample of the use of conditions:

       = f *.tar.gz | f *.tgz & t n
       L    List the contents of a compressed tar-archive
            gzip -cd %f | tar xvf -

       Addition Conditions

       If the condition begins with '+' (or '+?') instead of '=' (or  '=?')  it  is  an  addition
       condition.  If  the  condition is true the menu entry will be included in the menu. If the
       condition is false the menu entry will not be included in the menu.

       You can combine default and addition conditions by starting condition with  '+='  or  '=+'
       (or  '+=?' or '=+?' if you want debug trace). If you want to use two different conditions,
       one for adding and another for defaulting, you can precede a menu entry with two condition
       lines, one starting with '+' and another starting with '='.

       Comments  are started with '#'. The additional comment lines must start with '#', space or
       tab.

  Options Menu
       The Midnight Commander has some options that may be toggled on and off in several  dialogs
       which  are  accessible from this menu. Options are enabled if they have an asterisk or "x"
       in front of them.

       The Configuration command pops up a dialog from which you can change most of  settings  of
       the Midnight Commander.

       The Layout command pops up a dialog from which you specify a bunch of options how mc looks
       like on the screen.

       The Panel options command pops up a dialog from which you specify options of file  manager
       panels.

       The Confirmation command pops up a dialog from which you specify which actions you want to
       confirm.

       The Display bits command pops up a dialog from which you may select  which  characters  is
       your terminal able to display.

       The  Learn  keys  command  pops  up  a  dialog from which you test some keys which are not
       working on some terminals and you may fix them.

       The Virtual FS command pops up a dialog from which you specify some VFS related options.

       The Save setup command saves the current settings of the Left, Right and Options menus.  A
       small number of other settings is saved, too.

    Configuration
       The options in this dialog are divided into several groups: "File operation options", "Esc
       key mode", "Pause after run" and "Other options".

       File operation options

       Verbose operation.  This toggles whether the file Copy, Rename and Delete  operations  are
       verbose  (i.e., display a dialog box for each operation). If you have a slow terminal, you
       may wish to disable the verbose operation. It is automatically turned off if the speed  of
       your terminal is less than 9600 bps.

       Compute  totals.   If  this  option is enabled, the Midnight Commander computes total byte
       sizes and total number of files prior to any Copy, Rename and Delete operations. This will
       provide  you  with  a more accurate progress bar at the expense of some speed. This option
       has no effect, if Verbose operation is disabled.

       Classic progressbar.  If this option  is  enabled,  the  progressbar  of  Copy/Move/Delete
       operations  is  always  grown  form  left  to right. If disabled, the growing direction of
       progressbar follows to direction of Copy/Move/Delete operation: from left panel  to  right
       one and vice versa. Enabled by default.

       Mkdir  autoname.   When  you  press  F7 to create a new directory, the input line in popup
       dialog will be filled by name of current file or directory in active panel.   Disabled  by
       default.

       Preallocate  space.   Preallocate  space  for  whole target file, if possible, before copy
       operation.  Disabled by default.

       Esc key mode.

       By default the Midnight Commander treats the ESC key as  a  key  prefix.   Therefore,  you
       should  press  Esc code twice to exit a dialog. But there is a possibility to use a single
       press of ESC key for that action.

       Single press.  By default this option is disabled. If you'll enable it, the ESC  key  will
       act  as  a prefix key for set up time interval (see Timeout option below), and if no extra
       keys have arrived, then the ESC key is interpreted as a cancel key (ESC ESC).

       Timeout.  This options is used to setup the time interval  (in  microseconds)  for  single
       press of ESC key. By default, this inrerval is one second (1000000 microseconds). Also the
       timeout  can  be  set  via   KEYBOARD_KEY_TIMEOUT_US   environment   variable   (also   in
       microseconds), which has higher priority than Timeout option value.

       Pause after run

       After  executing  your commands, the Midnight Commander can pause, so that you can examine
       the output of the command.  There are three possible settings for this variable:

       Never.  Means that you do not want to see the output of your command.  If  you  are  using
       the  Linux  or  FreeBSD  console  or  an  xterm, you will be able to see the output of the
       command by typing C-o.

       On dumb terminals.  You will get the pause message on terminals that are  not  capable  of
       showing  the output of the last command executed (any terminal that is not an xterm or the
       Linux console).

       Always.  The program will pause after executing all of your commands.

       Other options

       Use internal editor.  If this option is enabled, the built-in file editor is used to  edit
       files.  If the option is disabled, the editor specified in the EDITOR environment variable
       is used.  If no editor is specified, vi is used.  See the section  on  the  internal  file
       editor.

       Use  internal viewer.  If this option is enabled, the built-in file viewer is used to view
       files. If the option is disabled, the pager specified in the PAGER environment variable is
       used.   If  no  pager  is  specified,  the  view  command is used.  See the section on the
       internal file viewer.

       Ask new file name.  If this option is enabled, file name is asked before open new file  in
       editor.

       Auto  menus.  If this option is enabled, the user menu will be invoked at startup.  Useful
       for building menus for non-unixers.

       Drop down menus.  When this option is enabled, the pull down menus will  be  activated  as
       soon  as  you  press the F9 key. Otherwise, you will only get the menu title, and you will
       have to activate the menu  either  with  the  arrow  keys  or  with  the  hotkeys.  It  is
       recommended if you are using hotkeys.

       Shell  Patterns.   By default the Select, Unselect and Filter commands will use shell-like
       regular expressions. The following conversions are performed to achieve this: the  '*'  is
       replaced  by  '.*'  (zero  or  more  characters); the '?'  is replaced by '.' (exactly one
       character) and '.' by the literal dot.  If  the  option  is  disabled,  then  the  regular
       expressions are the ones described in ed(1).

       Complete: show all.  By default the Midnight Commander pops up all possible completions if
       the completion is ambiguous only when you press Alt-Tab for  the  second  time.   For  the
       first  time,  it  just  completes  as much as possible and beeps in the case of ambiguity.
       Enable this option if you want to see all possible completions even after pressing Alt-Tab
       the first time.

       Rotating dash.  If this option is enabled, the Midnight Commander shows a rotating dash in
       the upper right corner as a work in progress indicator.

       Cd follows links.  This option, if set,  causes  the  Midnight  Commander  to  follow  the
       logical  chain  of  directories  when  changing current directory either in the panels, or
       using the cd command. This is the default behavior  of  bash.  When  unset,  the  Midnight
       Commander  follows the real directory structure, so cd .. if you've entered that directory
       through a link will move you to the  current  directory's  real  parent  and  not  to  the
       directory where the link was present.

       Safe  delete.   If  this  option  is enabled, deleting files and directory hotlist entries
       unintentionally becomes more difficult.  The default selection in the confirmation dialogs
       for deletion changes from "Yes" to "No".  This option is disabled by default.

       Auto  save  setup.   If  this  option is enabled, when you exit the Midnight Commander the
       configurable options of the Midnight Commander are saved in the ~/.config/mc/ini file.

    Layout
       The layout dialog gives you a possibility to change the  general  layout  of  screen.  The
       options  in  this  dialog are divided into several groups: "Panel split", "Console output"
       and "Other options".

       Panel split

       The rest of the screen area is used for the two directory panels. You can specify  whether
       the  area  is split to the panels in Vertical or Horizontal direction. Panel layout can be
       changed using Alt-, (Alt-comma) shortcut.

       Equal split.  By default, panels have equal sizes. Using this option you  can  specify  an
       unequal split.

       Console output

       On  the  Linux  or  FreeBSD console you can specify how many lines are shown in the output
       window. This option is available if Midnight Commander runs on native console only.

       Other options

       Menu bar visible.  If enabled, main menu of Midnight Commander is always  visible  on  the
       top row of screen above panels. Enabled by default.

       Command prompt.  If enabled, command line is avalable. Enabled by default.

       Keybar  visible.   If  enabled,  10  lables associated with F1-F10 keys are located at the
       bottom row of screen. Enabled by default.

       Hintbar visible.  If enabled, the one-line hints are  visible  below  panels.  Enabled  by
       default.

       XTerm  window title.  When run in a terminal emulator for X11, Midnight Commander sets the
       terminal window title to the current working directory and updates it when necessary.   If
       your  terminal  emulator  is  broken  and  you  see  some  incorrect output on startup and
       directory change, turn off this option.  Enabled by default.

       Show free space.  If enabled, free space and total space of current file system  is  shown
       at the bottom frame of panel. Enabled by default.

    Panel options
       Main panel options

       Show mini-status.  If enabled, one line of status information about the currently selected
       item is shown at the bottom of the panels. Enabled by default.

       Use SI size units.  If this option is  enabled,  Midnight  Commander  will  use  SI  units
       (powers  of  1000)  when  displaying  any byte sizes. The suffixes (k, m ...) are shown in
       lowercase.  If disabled (default), Midnight Commander will use  binary  units  (powers  of
       1024) and the suffixes are shown in upper case (K, M ...)

       Mix  all  files.   If  this  option  is enabled, all files and directories are shown mixed
       together.  If the option is disabled (default), directories (and links to directories) are
       shown at the beginning of the listing, and other files below.

       Show  backup  files.   If  enabled,  the  Midnight Commander will show files ending with a
       tilde.  Otherwise, they won't be shown (like GNU's ls option -B). Enabled by default.

       Show hidden files.  If enabled, the Midnight Commander will show all files that start with
       a dot (like ls -a). Disabled by default.

       Fast directory reload.  If this option is enabled, the Midnight Commander will use a trick
       to determine if the directory contents have changed.  The trick is to reload the directory
       only  if the i-node of the directory has changed; this means that reloads only happen when
       files are created or deleted.  If what changes is the i-node for a file in  the  directory
       (file  size  changes,  mode  or  owner changes, etc) the display is not updated.  In these
       cases, if you have the option on, you have to rescan the directory  manually  (with  C-r).
       Disabled by default.

       Mark  moves down.  If enabled, the selection bar will move down when you mark a file (with
       Insert key). Enabled by default.

       Reverse files only.  Allow revert  selection  of  files  only.  Enabled  by  default.   If
       enabled,  the  reverse  selection  is  applied  to  files  only,  not to directories.  The
       selection of directories is untouched. If off, the reverse selection is applied  to  files
       as well to directories: all unselected items become selected, and vice versa.

       Simple  swap.  If both panels contain file listing, simple swap means that panels exchange
       its screen positions: left panel become right one, and  vice  versa.  If  this  option  is
       unchecked,  file  listing  panels  exchange  its  content  keeping listing format and sort
       options. Unchecked by default.

       Auto save panels setup.  If this option is enabled, when you exit the  Midnight  Commander
       the current settings of panels are saved in the ~/.config/mc/panels.ini file.  Disabled by
       default.

       Navigation

       Lynx-like motion.  If this option is enabled, you may use the arrows keys to automatically
       chdir  if  the current selection is a subdirectory and the shell command line is empty. By
       default, this setting is off.

       Page scrolling.  If set (the default), panel will scroll by  half  the  display  when  the
       cursor reaches the end or the beginning of the panel, otherwise it will just scroll a file
       at a time.

       Mouse page scrolling.  Controls whenever scrolling with the mouse wheel is done  by  pages
       or line by line on the panels.

       File highlight

       You  can specify whether permissions and file types should be highlighted with distinctive
       Colors.  If the permission highlighting is enabled, the parts of the perm and mode display
       fields  which  apply to the user running Midnight Commander are highlighted with the color
       defined by the selected keyword.  If the file type highlighting is enabled, file names are
       colored  according  to  rules  described  in /etc/mc/filehighlight.ini file. See Filenames
       Highlight for more info.

       Quick search

       You can specify  how  the  Quick  search  mode  should  works:  case  insensitively,  case
       sensitively or be matched to the the panel sort order: case sensitive or not.

    Confirmation
       In  this  dialog  you  configure  the  confirmation options for file deletion, overwriting
       files, execution by pressing  enter,  quitting  the  program,  directory  hotlist  entries
       deletion and history cleanup.
        and.

    Display bits
       This is used to configure the range of visible characters on the screen.  This setting may
       be 7-bits if your terminal/curses supports only seven output bits, ISO-8859-1 displays all
       the  characters  in  the  ISO-8859-1  map  and full 8 bits is for those terminals that can
       display full 8 bit characters.

    Learn keys
       This dialog allows you to test and redefine functional keys, cursor arrows and some  other
       keys  to  make them work properly on your terminal.  They often don't, since many terminal
       databases are incomplete or broken.

       You can move around with the Tab key and with the vi moving keys ('h' left, 'j' down,  'k'
       up  and  'l' right).  Once you press any cursor movement key and it is recognized, you can
       use that key as well.

       You can test keys just by pressing each  of  them.   When  you  press  a  key  and  it  is
       recognized  properly, OK should appear next to the name of that key.  Once a key is marked
       OK it starts working as usually, e.g. F1 pressed the first time will just check  that  the
       F1  key works, but after that it will show help.  The same applies to the arrow keys.  The
       Tab key should be working always.

       If some keys do not work properly then you won't see  OK  appear  after  pressing  one  of
       these.   Then  you may want to redefine it.  Do it by pressing the button with the name of
       that key (either by the mouse or by Enter or Space after selecting the button with Tab  or
       arrows).   Then  a  message  box will appear asking you to press that key.  Do it and wait
       until the message box disappears.  If you want to abort, just press Escape once and wait.

       When you finish with all the keys, you can Save them.  The definitions for  the  keys  you
       have  redefined  will be written into the [terminal:TERM] section of your ~/.config/mc/ini
       file (where TERM is the name of your current terminal).  The definitions of the keys  that
       were already working properly are not saved.

    Virtual FS
       This option gives you control over the settings of the Virtual File System.

       The Midnight Commander keeps in memory the information related to some of the virtual file
       systems to speed up the access to the files in the file  system  (for  example,  directory
       listings fetched from FTP servers).

       Also,  in  order  to  access the contents of compressed files (for example, compressed tar
       files) the Midnight Commander needs to create temporary uncompressed files on your disk.

       Since both the information in memory and the temporary files on disk  take  up  resources,
       you  may  want  to tune the parameters of the cached information to decrease your resource
       usage or to maximize the speed of access to frequently used file systems.

       Because of the format of the tar archives, the Tar filesystem needs to read the whole file
       just  to  load  the file entries.  Since most tar files are usually kept compressed (plain
       tar files are species in extinction), the tar file system has to uncompress  the  file  on
       the  disk  in  a temporary location and then access the uncompressed file as a regular tar
       file.

       Now, since we all love to browse files and tar files all over the disk, it's  common  that
       you  will  leave  a tar file and then re-enter it later.  Since decompression is slow, the
       Midnight Commander will cache the information in memory for  a  limited  time.   When  the
       timeout  expires,  all  the  resources  associated with the file system are released.  The
       default timeout is set to one minute.

       The FTP File System (ftpfs) allows you to browse directories on remote  FTP  servers.   It
       has several options.

       ftp  anonymous  password  is  the password used when you login as "anonymous".  Some sites
       require a valid e-mail address.  On the other hand, you probably don't want to  give  your
       real e-mail address to untrusted sites, especially if you are not using spam filtering.

       ftpfs  keeps  the  directory  listing  it fetches from a FTP server in a cache.  The cache
       expire time is configurable with the ftpfs directory cache timeout option.   A  low  value
       for  this  option may slow down every operation on the ftpfs because every operation would
       require sending a request to the FTP server.

       You can define an FTP proxy host for doing FTP.  Note that most modern firewalls are fully
       transparent at least for passive FTP (see below), so FTP proxies are considered obsolete.

       If  Always  use ftp proxy is not set, you can use the exclamation sign to enable proxy for
       certain hosts.  See FTP File System for examples.

       If this option is set, the program will do two things: consult the /usr/lib/mc/mc.no_proxy
       file  for  lines containing host names that are local (if the host name starts with a dot,
       it is assumed to be a domain) and to assume that any hostnames without dots in their names
       are  directly  accessible.   All  other  hosts  will be accessed through the specified FTP
       proxy.

       You can enable using ~/.netrc file, which keeps login names and passwords for ftp servers.
       See netrc (5) for the description of the .netrc format.

       Use  passive mode enables using FTP passive mode, when the connection for data transfer is
       initiated by the client, not by the server.  This option is  recommended  and  enabled  by
       default.   If  this  option is turned off, the data connection is initiated by the server.
       This may not work with some firewalls.

    Save Setup
       At startup the Midnight Commander will try to load  initialization  information  from  the
       ~/.config/mc/ini  file.  If this file doesn't exist, it will load the information from the
       system-wide configuration  file,  located  in  /usr/share/mc/mc.ini.  If  the  system-wide
       configuration file doesn't exist, MC uses the default settings.

       The Save Setup command creates the ~/.config/mc/ini file by saving the current settings of
       the Left, Right and Options menus.

       If you activate the auto save setup option, MC will always save the current settings  when
       exiting.

       There  also exist settings which can't be changed from the menus. To change these settings
       you have to edit the setup file with your favorite editor.  See  the  section  on  Special
       Settings for more information.

Executing operating system commands

       You  may  execute commands by typing them directly in the Midnight Commander's input line,
       or by selecting the program you want to execute with the  selection  bar  in  one  of  the
       panels and hitting Enter.

       If  you  press Enter over a file that is not executable, the Midnight Commander checks the
       extension of the selected file against the extensions in the Extensions File.  If a  match
       is  found  then  the  code associated with that extension is executed. A very simple macro
       expansion takes place before executing the command.

  The cd internal command
       The cd command is interpreted by the Midnight Commander, it is not passed to  the  command
       shell  for  execution.   Thus  it  may  not  handle  all  of  the nice macro expansion and
       substitution that your shell does, although it does some of them:

       Tilde substitution.  The (~) will be substituted with your home directory, if you append a
       username  after  the  tilde,  then  it will be substituted with the login directory of the
       specified user.

       For example, ~guest is the home directory  for  the  user  guest,  while  ~/guest  is  the
       directory guest in your home directory.

       Previous  directory.   You  can  jump  to  the  directory you were previously by using the
       special directory name '-' like this: cd -

       CDPATH directories.  If the directory specified to the cd command is not  in  the  current
       directory,  then  The Midnight Commander uses the value in the environment variable CDPATH
       to search for the directory in any of the named directories.

       For example you could set your CDPATH variable to ~/src:/usr/src, allowing you  to  change
       your  directory  to any of the directories inside the ~/src and /usr/src directories, from
       any place in the file system by using its relative name (for example cd linux  could  take
       you to /usr/src/linux).

  Macro Substitution
       When  accessing  a  user  menu,  or executing an extension dependent command, or running a
       command from the command line input, a simple macro substitution takes place.

       The macros are:

       %i     The indent of blank space, equal the cursor column position.  For edit menu only.

       %y     The syntax type of current file. For edit menu only.

       %k     The block file name.

       %e     The error file name.

       %m     The current menu name.

       %f and %p
              The current file name.

       %x     The extension of current file name.

       %b     The current file name without extension.

       %d     The current directory name.

       %F     The current file in the unselected panel.

       %D     The directory name of the unselected panel.

       %t     The currently tagged files.

       %T     The tagged files in the unselected panel.

       %u and %U
              Similar to the %t and %T macros, but in addition the files are untagged.   You  can
              use  this macro only once per menu file entry or extension file entry, because next
              time there will be no tagged files.

       %s and %S
              The selected files: The tagged files if there are any. Otherwise the current file.

       %cd    This is a special macro that is  used  to  change  the  current  directory  to  the
              directory  specified in front of it.  This is used primarily as an interface to the
              Virtual File System.

       %view  This macro is used to invoke the internal viewer.  This macro can be used alone, or
              with  arguments.   If you pass any arguments to this macro, they should be enclosed
              in brackets.

              The arguments are: ascii to force the viewer into ascii  mode;  hex  to  force  the
              viewer  into  hex  mode; nroff to tell the viewer that it should interpret the bold
              and underline sequences of nroff; unformatted to tell the viewer to  not  interpret
              nroff commands for making the text bold or underlined.

       %%     The % character

       %{some text}
              Prompt  for  the substitution. An input box is shown and the text inside the braces
              is used as a prompt. The macro is substituted by the text typed by  the  user.  The
              user  can  press  ESC or F10 to cancel. This macro doesn't work on the command line
              yet.

       %var{ENV:default}
              If environment variable ENV is unset, the default is substituted.   Otherwise,  the
              value of ENV is substituted.

  The subshell support
       The  subshell support is a compile time option, that works with the shells: bash, tcsh and
       zsh.

       When the subshell code is activated the Midnight Commander will spawn a concurrent copy of
       your  shell  (the one defined in the SHELL variable and if it is not defined, then the one
       in the /etc/passwd file) and run it in a pseudo terminal, instead of invoking a new  shell
       each  time you execute a command, the command will be passed to the subshell as if you had
       typed it.  This also allows you to change the environment variables, use  shell  functions
       and define aliases that are valid until you quit the Midnight Commander.

       If  you  are  using  bash  you  can  specify  startup  commands  for  the subshell in your
       ~/.local/share/mc/bashrc file and special keyboard maps in  the  ~/.local/share/mc/inputrc
       file.  tcsh users may specify startup commands in the ~/.local/share/mc/tcshrc file.

       When the subshell code is used, you can suspend applications at any time with the sequence
       C-o and jump back to the Midnight Commander, if you interrupt an application, you will not
       be able to run other external commands until you quit the application you interrupted.

       An  extra added feature of using the subshell is that the prompt displayed by the Midnight
       Commander is the same prompt that you are currently using in your shell.

       The OPTIONS section has more information on how you can control the subshell code.

Chmod

       The Chmod window is used to change the attribute bits in a group of files and directories.
       It can be invoked with the C-x c key combination.

       The Chmod window has two parts - Permissions and File.

       In the File section are displayed the name of the file or directory and its permissions in
       octal form, as well as its owner and group.

       In the Permissions section there is a set of check buttons which correspond  to  the  file
       attribute  bits.   As you change the attribute bits, you can see the octal value change in
       the File section.

       To move between the widgets (buttons and check buttons) use the arrow keys or the Tab key.
       To  change  the  state of the check buttons or to select a button use Space.  You can also
       use the hotkeys on the buttons to quickly activate them.  Hotkeys are shown as highlighted
       letters on the buttons.

       To set the attribute bits, use the Enter key.

       When  working with a group of files or directories, you just click on the bits you want to
       set or clear.  Once you have selected the bits you want to change, you select one  of  the
       action buttons (Set marked or Clear marked).

       Finally,  to  set  the  attributes  exactly  to those specified, you can use the [Set all]
       button, which will act on all the tagged files.

       [Marked all] set only marked attributes to all selected files

       [Set marked] set marked bits in attributes of all selected files

       [Clean marked] clear marked bits in attributes of all selected files

       [Set] set the attributes of one file

       [Cancel] cancel the Chmod command

Chown

       The Chown command is used to change the owner/group of  a  file.  The  hot  key  for  this
       command is C-x o.

Advanced Chown

       The  Advanced  Chown  command is the Chmod and Chown command combined into one window. You
       can change the permissions and owner/group of files at once.

File Operations

       When you copy, move or delete files the  Midnight  Commander  shows  the  file  operations
       dialog.   It shows the files currently being processed and uses up to three progress bars.
       The file bar indicates the percentage of the current file that has been processed so  far.
       The  count  bar  shows  how  many  of  the  tagged files have been handled.  The bytes bar
       indicates the percentage of the total size of the tagged files that has been handled.   If
       the verbose option is off, the file and bytes bars are not shown.

       There  are two buttons at the bottom of the dialog. Pressing the Skip button will skip the
       rest of the current file. Pressing the Abort button will abort the  whole  operation,  the
       rest of the files are skipped.

       There are three other dialogs which you can run into during the file operations.

       The  error  dialog  informs  about  error  conditions and has three choices.  Normally you
       select either the Skip button to skip the file or the Abort button to abort the  operation
       altogether.   You  can  also select the Retry button if you fixed the problem from another
       terminal.

       The replace dialog is shown when you attempt to copy or move a  file  on  the  top  of  an
       existing  file.   The  dialog  shows the dates and sizes of the both files.  Press the Yes
       button to overwrite the file, the No button to skip the file, the All button to  overwrite
       all  the  files,  the None button to never overwrite and the Update button to overwrite if
       the source file is newer than the target file.  You  can  abort  the  whole  operation  by
       pressing the Abort button.

       The  recursive  delete  dialog  is  shown  when you try to delete a directory which is not
       empty.  Press the Yes button to delete the directory recursively, the No  button  to  skip
       the  directory,  the  All button to delete all the directories and the None button to skip
       all the non-empty directories.  You can abort the whole operation by  pressing  the  Abort
       button.  If you selected the Yes or All button you will be asked for a confirmation.  Type
       "yes" only if you are really sure you want to do the recursive delete.

       If you have tagged files and perform an operation on them only  the  files  on  which  the
       operation succeeded are untagged. Failed and skipped files are left tagged.

Mask Copy/Rename

       The  copy/move  operations let you translate the names of files in an easy way.  To do it,
       you have to specify the correct source mask and  usually  in  the  trailing  part  of  the
       destination  specify  some  wildcards.   All  the  files  matching  the  source  mask  are
       copied/renamed according to the target mask.  If there are tagged files, only  the  tagged
       files matching the source mask are renamed.

       There are other options which you can set:

       Follow links

       determines whether make the symlinks and hardlinks in the source directory (recursively in
       subdirectories) new links in the target directory or whether would you like to copy  their
       content.

       Dive into subdirs

       determines  the  behavior  when the source directory is about to be copied, but the target
       directory already exists.  The default action is  to  copy  the  contents  of  the  source
       directory  into  the  target  directory.   Enabling  this option causes copying the source
       directory itself into the target directory.

       For example, you want to copy directory /foo containing file bar to /bla/foo, which is  an
       already  existing  directory.  Normally (when Dive into subdirs is not set), mc would copy
       file /foo/bar into the file  /bla/foo/bar.   By  enabling  this  option  the  /bla/foo/foo
       directory will be created, and /foo/bar will be copied into /bla/foo/foo/bar.

       Preserve attributes

       determines  whether  to  preserve  the  permissions,  timestamps and (if you are root) the
       ownership of the original files.  If this option is not set,  the  current  value  of  the
       umask will be respected.

       Use shell patterns

       When this option is on you can use the '*' and '?' wildcards in the source mask. They work
       like they do in the shell. In the target mask only the '*' and  '\<digit>'  wildcards  are
       allowed. The first '*' wildcard in the target mask corresponds to the first wildcard group
       in the source mask, the second '*' corresponds to the second group and so  on.   The  '\1'
       wildcard  corresponds  to  the  first wildcard group in the source mask, the '\2' wildcard
       corresponds to the second group and so on all the way up to '\9'.  The  '\0'  wildcard  is
       the whole filename of the source file.

       Two examples:

       If  the  source  mask  is  "*.tar.gz",  the destination is "/bla/*.tgz" and the file to be
       copied is "foo.tar.gz", the copy will be "foo.tgz" in "/bla".

       Suppose you want to swap basename and extension so that "file.c" would become "c.file" and
       so on.  The source mask for this is "*.*" and the destination is "\2.\1".

       Use shell patterns off

       When  the  shell  patterns option is off the MC doesn't do automatic grouping anymore. You
       must use '\(...\)' expressions in the source mask to specify meaning for the wildcards  in
       the  target  mask.  This  is more flexible but also requires more typing. Otherwise target
       masks are similar to the situation when the shell patterns option is on.

       Two examples:

       If the source mask is "^\(.*\)\.tar\.gz$", the destination is "/bla/*.tgz" and the file to
       be copied is "foo.tar.gz", the copy will be "/bla/foo.tgz".

       Let's  suppose  you  want  to  swap  basename  and  extension so that "file.c" will become
       "c.file" and so on. The source mask for this is "^\(.*\)\.\(.*\)$" and the destination  is
       "\2.\1".

       Case Conversions

       You  can  also  change  the  case of the filenames.  If you use '\u' or '\l' in the target
       mask, the next character will be converted to uppercase or lowercase correspondingly.

       If you use '\U' or '\L' in the target mask, the  next  characters  will  be  converted  to
       uppercase  or  lowercase correspondingly up to the next '\E' or next '\U', '\L' or the end
       of the file name.

       The '\u' and '\l' are stronger than '\U' and '\L'.

       For example, if the source mask is '*' ( Use shell patterns on) or '^\(.*\)$' ( Use  shell
       patterns  off)  and  the  target  mask is '\L\u*' the file names will be converted to have
       initial upper case and otherwise lower case.

       You can also use '\' as a quote character. For example, '\\' is a backslash and '\*' is an
       asterisk.

       Stable symlinks

       commands Midnight Commander, that it should change symlinks in the target, so that they'll
       point to the same location as it did  before.  With  absolute  symbolic  links  this  does
       nothing, but if you have a relative one, it will recompute its value, adding necessary ../
       and other directory parts  and  making  the  value  as  short  as  possible  (most  modern
       filesystems keep short symlinks inside inodes and thus don't waste much disk space).

Select/Unselect Files

       The  dialog  of  group  of  files and directories selection or uselection.  The input line
       allow enter the regular expression of filenames that will be selected/unselected.

       When Files only checkbox is on, only files will be selected.  If Files  only  is  off,  as
       files  as  directories  will be selected.  When Shell Patterns checkbox is on, the regular
       expression is much like the filename globbing in the shell (* standing for  zero  or  more
       characters  and ?  standing for one character). If Shell Patterns is off, then the tagging
       of files is done with normal  regular  expressions  (see  ed  (1)).  When  Case  sensitive
       checkbox  is  on,  the  selection will be case sensitive characters.  If Case sensitive is
       off, the case will be ignored.

Internal Diff Viewer

       The mcdiff is a visual diff tool. You can compare two files and edit them in-place  (diffs
       are  updated  dynamically).  You  can  browse and view a working copy from popular version
       control systems (GIT, Subversion, etc).

       Following shortcuts are available in internal diff viewer of Midnight Commander.

       F1 Invoke the built-in hypertext help viewer.

       F2 Save modified files.

       F4 Edit file of the left panel in the internal editor.

       F14 Edit file of the right panel in the internal editor.

       F5 Merge the current hunk. Only the current hunk will be merged.

       F7 Start search.

       F17 Continue search.

       F10, Esc, q Exit from diff viewer.

       Alt-s, s Toggle show of hunk status.

       Alt-n, l Toggle show of line numbers.

       f Maximize left panel.

       = Make panels equal in width.

       > Reduce the size of the right panel.

       < Reduce the size of the left panel.

       c Toggle show of trailing carriage return (CR) symbol as ^M.

       2, 3, 4, 8 Set tabulation size

       C-u Swap contents of diff panels.

       C-r Refresh the screen.

       C-o Switch to the subshell and show the command screen.

       Enter, Space, n Find next diff hunk.

       Backspace, p Find previous diff hunk.

       g Go to line.

       Down Scroll one line forward.

       Up Scroll one line backward.

       PageUp Move one page up.

       PageDown Mves one page down.

       Home, A1 Moves to the line beginning.

       End Moves to the line end.

       C-Home Move to the file beginning.

       C-End, C1 Move to the file end.

Internal File Viewer

       The internal file viewer provides two display modes: ASCII and  hex.   To  toggle  between
       modes, use the F4 key.

       The  viewer  will  try  to use the best method provided by your system or the file type to
       display  the  information.   Some  character  sequences,  which  appear  most   often   in
       preformatted manual pages, are displayed bold and underlined, thus making a pretty display
       of your files.

       When in hex mode, the search function accepts text in quotes and constant  numbers.   Text
       in  quotes  is  matched  exactly after removing the quotes.  Each number matches one byte.
       You can mix quoted text with constants like this:

       "String" -1 0xBB 012 "more text"

       Note that 012 is an octal number.  -1 is converted to 0xFF.

       Here is a listing of the actions associated with each  key  that  the  Midnight  Commander
       handles in the internal file viewer.

       F1 Invoke the built-in hypertext help viewer.

       F2 Toggle the wrap mode.

       F4 Toggle the hex mode.

       F5 Goto line.  This will prompt you for a line number and will display that line.

       F6, /.  Regular expression search.

       ?, Reverse regular expression search.

       F7 Normal search / hex mode search.

       C-s,  F17,  n.   Start  normal search if there was no previous search expression else find
       next match.

       C-r.  Start reverse search if there was no  previous  search  expression  else  find  next
       match.

       F8  Toggle  Raw/Parsed  mode:  This will show the file as found on disk or if a processing
       filter has been specified in the mc.ext file, then the output  from  the  filter.  Current
       mode is always the other than written on the button label, since on the button is the mode
       which you enter by that key.

       F9 Toggle the format/unformat mode: when format mode is on the viewer will interpret  some
       string  sequences  to show bold and underline with different colors. Also, on button label
       is the other mode than current.

       F10, Esc.  Exit the internal file viewer.

       next-page, space, C-v.  Scroll one page forward.

       prev-page, Alt-v, C-b, Backspace.  Scroll one page backward.

       down-key Scroll one line forward.

       up-key Scroll one line backward.

       C-l Refresh the screen.

       C-o Switch to the subshell and show the command screen.

       [n] m Set the mark n.

       [n] r Jump to the mark n.

       C-f Jump to the next file.

       C-b Jump to the previous file.

       Alt-r Toggle the ruler.

       Alt-e to change charset of displayed text may use M-e  (Alt-e).   Recoding  is  made  from
       selected  codepage  into  system  codepage.  To  cancel  the  recoding you may select "<No
       translation>" in charset selection dialog.

       It's possible to instruct the file viewer  how  to  display  a  file,  look  at  the  Edit
       Extension File section

Internal File Editor

       The  internal  file editor is a full-featured full screen editor.  It can edit files up to
       64 megabytes.  It is possible to edit binary files.  The internal file editor  is  invoked
       using F4 if the use_internal_edit option is set in the initialization file.

       The  features it presently supports are: block copy, move, delete, cut, paste; key for key
       undo; pull-down menus; file insertion;  macro  commands;  regular  expression  search  and
       replace;  shift-arrow  text  highlighting (if supported by the terminal); insert-overwrite
       toggle; word wrap; autoindent; tunable tab size;  syntax  highlighting  for  various  file
       types; and an option to pipe text blocks through shell commands like indent and ispell.

       Sections:

              Options of editor in ini-file

       The  editor  is  very easy to use and requires no tutoring. To see what keys do what, just
       consult the appropriate pull-down menu. Other  keys  are:  Shift  movement  keys  do  text
       highlighting.   Ctrl-Ins  copies  to  the  file  mcedit.clip  and  Shift-Ins  pastes  from
       mcedit.clip.  Shift-Del cuts to mcedit.clip, and Ctrl-Del deletes highlighted text.  Mouse
       highlighting also works, and you can override the mouse as usual by holding down the shift
       key while dragging the mouse to let normal terminal mouse highlighting work.

       To define a macro, press Ctrl-R and then type out the key strokes you want to be executed.
       Press  Ctrl-R  again  when  finished. You can then assign the macro to any key you like by
       pressing that key. The macro is executed when you press Ctrl-A and then the assigned  key.
       The  macro is also executed if you press Meta, Ctrl, or Esc and the assigned key, provided
       that the key is not used for any other function. Once defined, the macro commands go  into
       the  file  ~/.local/share/mc/mcedit/mcedit.macros  You  can delete a macro by deleting the
       appropriate line in this file.

       To change charset of displayed text may use M-e (Alt-e).  Recoding is made  from  selected
       codepage into system codepage. To cancel the recoding you may select "<No translation>" in
       charset selection dialog.

       F19 will format the currently highlighted block (plain text or C or C++ code or  another).
       This   is   controlled  by  the  file  /usr/share/mc/edit.indent.rc  which  is  copied  to
       ~/.local/share/mc/mcedit/edit.indent.rc in your home directory the first time you use it.

       The editor also displays non-us characters (160+). When editing binary files,  you  should
       set display bits to 7 bits in the options menu to keep the spacing clean.

Options of editor in ini-file

       Some  editor  options  of  ini-file  are described in this section.  Options are placed in
       [Midnight-Commander] section

       editor_wordcompletion_collect_entire_file
              Search autocomplete candidates in entire of file or just  from  begin  of  file  to
              cursor position (0)

Screen selector

       Midnight Commander supports running many internal modules (such as editor, viewer and diff
       viewer) simultaneously and switching  between  them  without  closing  open  files.  Using
       several file managers at a time, however, is not currently supported.

       Let's call each of these modules a screen. There are three ways to switch between screens,
       using one of these global shortcuts:

       Alt-}  switch to the next screen;

       Alt-{  switch to the previous screen;

       Alt-`  open a dialog window with the list of currently open screens (or  use  the  "Screen
              list" menu item).

Completion

       Let the Midnight Commander type for you.

       Attempt to perform completion on the text before current position.  MC attempts completion
       treating the text as variable (if the text begins with $), username (if  the  text  begins
       with  ~),  hostname (if the text begins with @) or command (if you are on the command line
       in the position where you might type a command, possible completions  then  include  shell
       reserved  words  and  shell built-in commands as well) in turn.  If none of these matches,
       filename completion is attempted.

       Filename, username, variable and hostname completion works on  all  input  lines,  command
       completion  is  command  line  specific.   If  the completion is ambiguous (there are more
       different possibilities), MC beeps and the following action depends on the setting of  the
       Complete:  show  all  option in the Configuration dialog.  If it is enabled, a list of all
       possibilities pops up next to the current position and you can select with the arrow  keys
       and  Enter  the  correct  entry.   You  can  also  type  the  first  letters  in which the
       possibilities differ to move to a subset of all possibilities  and  complete  as  much  as
       possible.   If  you  press  Alt-Tab  again,  only the subset will be shown in the listbox,
       otherwise the first item which matches all the previous characters  will  be  highlighted.
       As soon as there is no ambiguity, dialog disappears, but you can hide it by canceling keys
       Esc, F10 and left and right arrow keys. If Complete: show all is disabled, the dialog pops
       up only if you press Alt-Tab for the second time, for the first time MC just beeps.

       Apply escaping of ?, * and & symbols (as \?, \*, \& ) in filenames to disallow use them as
       metasymbols in regular expressions when substitution is performed in the input line.

Virtual File System

       The Midnight Commander is provided with a code layer to access the file system; this  code
       layer  is  known as the virtual file system switch.  The virtual file system switch allows
       the Midnight Commander to manipulate files not located on the Unix file system.

       Currently the Midnight Commander is packaged with some Virtual  File  Systems  (VFS):  the
       local  file  system,  used  for accessing the regular Unix file system; the ftpfs, used to
       manipulate files on remote systems with the FTP protocol; the tarfs,  used  to  manipulate
       tar  and  compressed  tar  files;  the undelfs, used to recover deleted files on ext2 file
       systems (the default file system for Linux systems), fish  (for  manipulating  files  over
       shell  connections  such  as  rsh  and  ssh).   If  the code was compiled with sftpfs (for
       manipulating files over SFTP connections).  If the code was compiled with  smbfs  support,
       you can manipulate files on remote systems with the SMB (CIFS) protocol.

       A  generic  extfs (EXTernal virtual File System) is provided in order to easily expand VFS
       capabilities using scripts and external software.

       The VFS switch code will interpret all of the path names used and will forward them to the
       correct  file system, the formats used for each one of the file systems is described later
       in their own section.

  FTP File System
       The FTP File System (ftpfs) allows  you  to  manipulate  files  on  remote  machines.   To
       actually use it, you can use the FTP link item in the menu or directly change your current
       directory using the cd command to a path name that looks like this:

       ftp://[!][user[:pass]@]machine[:port][remote-dir]

       The user, port and remote-dir elements are optional.  If you specify the user element, the
       Midnight  Commander  will  login to the remote machine as that user, otherwise it will use
       anonymous login or the login name from the ~/.netrc file.  The optional  pass  element  is
       the password used for the connection.  Using the password in the VFS directory name is not
       recommended, because it can appear on the screen in clear text and can  be  saved  to  the
       directory history.

       To enable using FTP proxy, prepend !  (an exclamation sign) to the hostname.

       Examples:

           ftp://ftp.nuclecu.unam.mx/linux/local
           ftp://tsx-11.mit.edu/pub/linux/packages
           ftp://!behind.firewall.edu/pub
           ftp://guest@remote-host.com:40/pub
           ftp://miguel:xxx@server/pub

       Please check the Virtual File System dialog box for ftpfs options.

  Tar File System
       The  tar  file  system provides you with read-only access to your tar files and compressed
       tar files by using the chdir command.  To change your directory to a tar file, you  change
       your current directory to the tar file by using the following syntax:

       /filename.tar/utar://[dir-inside-tar]

       The  mc.ext  file  already  provides a shortcut for tar files, this means that usually you
       just point to a tar file and press return to  enter  into  the  tar  file,  see  the  Edit
       Extension File section for details on how this is done.

       Examples:

           mc-3.0.tar.gz/utar://mc-3.0/vfs
           /ftp/GCC/gcc-2.7.0.tar/utar://

       The latter specifies the full path of the tar archive.

  FIle transfer over SHell filesystem
       The  fish  file  system  is  a network based file system that allows you to manipulate the
       files in a remote machine as if they were local. To use this, the other side has to either
       run fish server, or has to have bash-compatible shell.

       To connect to a remote machine, you just need to chdir into a special directory which name
       is in the following format:

       sh://[user@]machine[:options]/[remote-dir]

       The user, options and remote-dir elements are optional.  If you specify the user  element,
       the  Midnight Commander will try to login on the remote machine as that user, otherwise it
       will use your login name.

       The available options are:
         'C' - use compression;
         'r' - use rsh instead of ssh;
         port - specify the port used by remote server.
       If the remote-dir element is present, your current directory on the remote machine will be
       set to this one.

       Examples:

           sh://onlyrsh.mx:r/linux/local
           sh://joe@want.compression.edu:C/private
           sh://joe@noncompressed.ssh.edu/private
           sh://joe@somehost.ssh.edu:2222/private

  SFTP (SSH File Transfer Protocol) filesystem
       The  SFTP  file  system  is  a network based file system that allows you to manipulate the
       files in a remote machine as if they were local.

       To connect to a remote machine, you just need to chdir into a special directory which name
       is in the following format:

       sftp://[user@]machine:[port]/[remote-dir]

       The user, port and remote-dir elements are optional.  If you specify the user element, the
       Midnight Commander will try to login on the remote machine as that user, otherwise it will
       use  your  login name.  port - specify the port used by remote server (22 by default).  If
       the remote-dir element is present, your current directory on the remote  machine  will  be
       set to this one.

       Examples:

           sftp://onlyrsh.mx/linux/local
           sftp://joe:password@want.compression.edu/private
           sftp://joe@noncompressed.ssh.edu/private
           sftp://joe@somehost.ssh.edu:2222/private

  Undelete File System
       On  Linux  systems, if you asked configure to use the ext2fs undelete facilities, you will
       have the undelete file system available.  Recovery of deleted files is only  available  on
       ext2 file systems.  The undelete file system is just an interface to the ext2fs library to
       retrieve all of the deleted files names on an ext2fs  and  provides  and  to  extract  the
       selected files into a regular partition.

       To  use  this  file  system,  you  have  to chdir into the special file name formed by the
       "undel://" prefix and the file name where the actual file system resides.

       For example, to recover deleted files on the second partition of the first  SCSI  disk  on
       Linux, you would use the following path name:

           undel://sda2

       It  may  take  a  while  for the undelfs to load the required information before you start
       browsing files there.

  SMB File System
       The smbfs allows you to manipulate files on remote machines with SMB (or  CIFS)  protocol.
       These  include  Windows  for  Workgroups,  Windows  9x/ME/XP, Windows NT, Windows 2000 and
       Samba.  To actually  use  it,  you  may  try  to  use  the  panel  command  "SMB  link..."
       (accessible  from  the  menubar)  or  you may directly change your current directory to it
       using the cd command to a path name that looks like this:

       smb://[user@]machine[/service][/remote-dir]

       The user, service and remote-dir elements are optional.  The user, domain and password can
       be specified in an input dialog.

       Examples:

           smb://machine/Share
           smb://other_machine
           smb://guest@machine/Public/Irlex

  EXTernal File System
       extfs allows you to integrate numerous features and file types into GNU Midnight Commander
       in an easy way, by writing scripts.

       Extfs filesystems can be divided into two categories:

       1. Stand-alone filesystems, which  are  not  associated  with  any  existing  file.   They
       represent certain system-wide data as a directory tree.  You can invoke them by typing 'cd
       fsname://' where fsname is an extfs short name (see below).  Examples of such  filesystems
       include  audio  (list  audio  tracks on the CD) or apt (list of all Debian packages in the
       system).

       For example, to list CD-Audio tracks on your CD-ROM drive, type

         cd audio://

       2. 'Archive' filesystems (like rpm, patchfs and more), which represent contents of a  file
       as  a directory tree.  It can consist of 'real' files compressed in an archive (urar, rpm)
       or virtual files, like messages in a mailbox (mailfs) or parts of a patch  (patchfs).   To
       access such filesystems 'fsname://' should be appended to the archive name.  Note that the
       archive itself can be on another vfs.

       For example, to list contents of a zip archive documents.zip type

         cd documents.zip/uzip://

       In many aspects, you could treat extfs like any other directory.  For  instance,  you  can
       add  it to the hotlist or change to it from directory history.  An important limitation is
       that you cannot invoke shell commands inside extfs, just like any other non-local VFS.

       Common extfs scripts included with Midnight Commander are:

       a      access 'A:' DOS/Windows diskette (cd a://).

       apt    front end to Debian's APT package management system (cd apt://).

       audio  audio CD ripping and playing (cd audio:// or cd device/audio://).

       bpp    package of Bad Penguin GNU/Linux distribution (cd file.bpp/bpp://).

       deb    package of Debian GNU/Linux distribution (cd file.deb/deb://).

       dpkg   Debian GNU/Linux installed packages (cd deb://).

       hp48   view and copy files to/from a HP48 calculator (cd hp48://).

       lslR   browsing of lslR listings as found on many FTPs (cd filename/lslR://).

       mailfs mbox-style mailbox files support (cd mailbox/mailfs://).

       patchfs
              extfs to handle unified and context diffs (cd filename/patchfs://).

       rpm    RPM package (cd filename/rpm://).

       rpms   RPM database management (cd rpms://).

       ulha, urar, uzip, uzoo, uar, uha
              archivers (cd archive/xxxx:// where xxxx is one of: ulha, urar,  uzip,  uzoo,  uar,
              uha).

       You  could  bind file type/extension to specified extfs as described in the Edit Extension
       File section.  Here is an example entry for Debian packages:

         regex/.deb$
                 Open=%cd %p/deb://

Colors

       The Midnight Commander will try to detect  if  your  terminal  supports  color  using  the
       terminal  database  and  your terminal name.  Sometimes it gets confused, so you may force
       color mode or disable color mode using the -c and -b flag respectively.

       If the program is compiled with the Slang screen manager instead of ncurses, it will  also
       check the variable COLORTERM, if it is set, it has the same effect as the -c flag.

       You  may  specify  terminals  that  always  force color mode by adding the color_terminals
       variable to the Colors section of the initialization file.  This will prevent the Midnight
       Commander from trying to detect if your terminal supports color.  Example:

       [Colors]
       color_terminals=linux,xterm
       color_terminals=terminal-name1,terminal-name2...

       The program can be compiled with both ncurses and slang, ncurses does not provide a way to
       force color mode: ncurses uses just the information in the terminal database.

       The Midnight Commander provides a way to change the default colors.  Currently the  colors
       are  configured using the environment variable MC_COLOR_TABLE or the Colors section in the
       initialization file.

       In the Colors section, the default color map is loaded from the base_color variable.   You
       can specify an alternate color map for a terminal by using the terminal name as the key in
       this section.  Example:

       [Colors]
       base_color=
       xterm=menu=magenta:marked=,magenta:markselect=,red

       The format for the color definition is:

         <keyword>=<fgcolor>,<bgcolor>,<attributes>:<keyword>=...

       The colors are optional,  and  the  keywords  are:  normal,  selected,  disabled,  marked,
       markselect,  errors,  input,  inputmark,  inputunchanged, commandlinemark, reverse, gauge,
       header, inputhistory, commandhistory.  Button  bar  colors  are:  bbarhotkey,  bbarbutton.
       Status  bar  color:  statusbar. Menu colors are: menunormal, menusel, menuhot, menuhotsel,
       menuinactive. Dialog colors are: dnormal, dfocus,  dhotnormal,  dhotfocus,  dtitle.  Error
       dialog  colors  are:  errdfocus, errdhotnormal, errdhotfocus, errdtitle.  Help colors are:
       helpnormal, helpitalic, helpbold,  helplink,  helpslink,  helptitle.   Viewer  color  are:
       viewbold,   viewunderline,   viewselected.    Editor  colors  are:  editnormal,  editbold,
       editmarked, editwhitespace, editlinestate.  Popup menu colors are: pmenunormal,  pmenusel,
       pmenutitle.

       header determines the color of panel header, the line that contains column titles and sort
       mode indicator.

       input determines the color of input lines used in query dialogs.

       gauge determines the color of the filled part of the progress bar (gauge), which  is  used
       to show the user the progress of file operations, such as copying.

       disabled determines the color of the widget that cannot be selected.

       The  dialog boxes use the following colors: dnormal is used for the normal text, dfocus is
       the color used for the currently selected component,  dhotnormal  is  the  color  used  to
       differentiate  the  hotkey color in normal components, whereas the dhotfocus color is used
       for the highlighted color in the currently selected component.

       Menus use the same scheme but  uses  the  menunormal,  menusel,  menuhot,  menuhotsel  and
       menuinactive tags instead.

       Help uses the following colors: helpnormal is used for normal text, helpitalic is used for
       text which is emphasized in italic in the manual page, helpbold is used for text which  is
       emphasized  in  bold  in the manual page, helplink is used for not selected hyperlinks and
       helpslink is used for selected hyperlink.

       Popup menu uses following colors: pmenunormal is used for non-selected menu items and as a
       main  color  of  popup menu window, pmenusel is used for selected menu item, pmenutitle is
       used for popup menu title.

       The possible colors are: black, gray, red, brightred, green, brightgreen,  brown,  yellow,
       blue, brightblue, magenta, brightmagenta, cyan, brightcyan, lightgray and white. And there
       is a special keyword for transparent background. It is 'default'. The 'default'  can  only
       be used for background color. Another special keyword "base" means mc's main colors.  When
       256 colors are available, they can be specified either  as  color16  to  color255,  or  as
       rgb000 to rgb555 and gray0 to gray23. Example:

       [Colors]
       base_color=normal=white,default:marked=magenta,default

       Attributes  can  be  any of bold, underline, reverse and blink, appended by a plus sign if
       more than one  are  desired.   The  special  word  "none"  means  no  attributes,  without
       attempting to fall back to base_color.  Example:

       menuhotsel=yellow;black;bold+underline

Skins

       You  can change the appearance of Midnight Commander.  To do this, you must specify a file
       that contain descriptions of colors and lines to draw boxes. Redefining of the  colors  is
       entirely compatible with the assignment of colors, as described in Section Colors.

       If  your skin contains any of 256-color definitions, you should define the '256colors' key
       set to TRUE value in [skin] section.

       A skin-file is searched on the following algorithm (to the first one found):

              1) command line option -S <skin> or --skin=<skin>
              2) Environment variable MC_SKIN
              3) Parameter skin in section [Midnight-Commander] in config file.
              4) File /etc/mc/skins/default.ini
              5) File /usr/share/mc/skins/default.ini

       Command line option, environment variable and parameter in config  file  may  contain  the
       absolute  path  to  the  skin-file  (with  the  extension  .ini  or without it). Search of
       skin-file will occur in (to the first one found):

              1) ~/.local/share/mc/skins/
              2) @sysconfdir@/mc/skins/
              3) /usr/share/mc/skins/

       For getting extended info, refer to:

              Description of section and parameters
              Color pair definitions
              Draw lines
              Compatibility

  Description of section and parameters
       Section [skin] contain metainfo for skin-file. Parameter description  contain  short  text
       about skin.

       Section  [filehighlight]  contain  descriptions of color pairs for filenames highlighting.
       Name of parameters must be equal to names of sections into  filehighlight.ini  file.   See
       Filenames Highlight for getting more info.

       Section [core] describes the elements that are used everywhere.

       _default_
              Default  color  pair.  Used  in  all  other  sections  if  they  not  contain color
              definitions

       selected
              cursor

       marked selected data

       markselect
              cursor on selected data

       gauge  color of the filled part of the progress bar

       input  color of input lines used in query dialogs

       inputmark
              color of input selected text

       inputunhanged
              color of input text before first modification or cursor movement

       commandlinemark
              color of selected text in command line

       reverse
              reverse color

       Section [dialog] describes the elements that are placed on dialog  windows  (except  error
       dialogs).

       _default_
              Default color for this section. Used [core]._default_ if not specified

       dfocus Color of active element (in focus)

       dhotnormal
              Color of hotkeys

       dhotfocus
              Color of hotkeys in focused element

       Section [error] describes the elements that are placed on error dialog windows

       _default_
              Default color for this section. Used [core]._default_ if not specified

       errdhotnormal
              Color of hotkeys

       errdhotfocus
              Color of hotkeys in focused element

       Section  [menu]  describes  the  elements  that are placed in menu. This section describes
       system menu (called by F9) and user-defined menus (called by F2 in panels and  by  F11  in
       editor).

       _default_
              Default color for this section. Used [core]._default_ if not specified

       entry  Color of menu items

       menuhot
              Color of menu hotkeys

       menusel
              Color of active menu item (in focus)

       menuhotsel
              Color of menu hotkeys in focused menu item

       menuinactive
              Color of inactive menu

       Section [help] describes the elements that are placed on help window.

       _default_
              Default color for this section. Used [core]._default_ if not specified

       helpitalic
              Color pair for element with italic attribute

       helpbold
              Color pair for element with bold attribute

       helplink
              Color of links

       helpslink
              Color of active link (on focus)

       Section [editor] describes the colors of elements placed in editor.

       _default_
              Default color for this section. Used [core]._default_ if not specified

       editbold
              Color pair for element with bold attribute

       editmarked
              Color of selected text

       editwhitespace
              Color of tabs and trailing spaces highlighting

       editlinestate
              Color for line state area

       Section [viewer] describes the colors of elements placed in viewer.

       viewunderline
              Color pair for element with underline attribute

  Color pair definitions
       Any parameter in skin-file contain definition of color pair.

       Color  pairs  described  as two colors and the optional attributes separated by ';'. First
       field sets the foreground color, second field sets background color, third field sets  the
       attributes.   Any  of  the  fields  may  be omitted, in this case value will be taken from
       default color pair (global color pair or from default color pair of this section).

       Example:
       [core]
           # green on black
           _default_=green;black
           # green (default) on blue
           selected=;blue
           # yellow on black (default)
           # underlined yellow on black (default)
           marked=yellow;;underline

       Possible colors (names) and attributes are described in Colors.  section.

  Draw lines
       Lines sets in section [Lines] into skin-file. By default single lines are  used,  but  you
       may redefine to usage of any utf-8 symbols (like to lines, for example).

       WARNING!!!   When  you  build  Midnight Commander with the Ncurses screen library usage of
       drawing lines is limited!  Possible only drawing a single lines.  For  all  questions  and
       comments please contact the developers of Ncurses.

       Descriptions of parameters [Lines]:

       lefttop
              left-top line fragment.

       righttop
              right-top line fragment.

       centertop
              down branch of horizontal line

       centerbottom
              up branch of horizontal line

       leftbottom
              left-bottom line fragment

       rightbottom
              right-bottom line fragment

       leftmiddle
              right branch of vertical line

       rightmiddle
              left branch of vertical line

       centermiddle
              cross of lines

       horiz  horizontal line

       vert   vertical line

       thinhoriz
              thin horizontal line

       thinvert
              thin vertical line

  Compatibility
       Appointment  of  color   by skin-files fully compatible with the appointment of the colors
       described in Colors.  section.

       In this case, reassignment of colors has priority over the skin file and is complementary.

Filenames Highlight

       Section [filehighlight] in current skin-file contains key names as  highlight  groups  and
       values as color pairs. Color pairs is documented in Skins section.

       Rules   of   filenames   highlight  are  placed  in  /usr/share/mc/filehighlight.ini  file
       (~/.config/mc/filehighlight.ini).   Name  of  section  in  this  file  must  be  equal  to
       parameters names in [filehighlight] section (in current skin-file).

       Keys in these groups are:

       type   file type. If present, all other options are ignored.

       regexp regular expression. If present, 'extensions' option is ignored.

       extensions
              list of extensions of files. Separated by ';' sign.

       extensions_case
              (make sense only with 'extensions' parameter) make 'extensions' rule case sentitive
              (true) or not (false).

       `type' key may have values:
       - FILE (all files)
         - FILE_EXE
       - DIR (all directories)
         - LINK_DIR
       - LINK (all links except stale link)
         - HARDLINK
         - SYMLINK
       - STALE_LINK
       - DEVICE (all device files)
         - DEVICE_BLOCK
         - DEVICE_CHAR
       - SPECIAL (all special files)
         - SPECIAL_SOCKET
         - SPECIAL_FIFO
         - SPECIAL_DOOR

Special Settings

       Most of the Midnight Commander settings can be changed from the menus. However, there  are
       a small number of settings which can only be changed by editing the setup file.

       These variables may be set in your ~/.config/mc/ini file:

       clear_before_exec
              By default the Midnight Commander clears the screen before executing a command.  If
              you would prefer to see the output of the command at the bottom of the screen, edit
              your  ~/.config/mc/ini  file and change the value of the field clear_before_exec to
              0.

       confirm_view_dir
              If you press F3 on a directory, normally MC enters that directory.  If this flag is
              set  to  1,  then MC will ask for confirmation before changing the directory if you
              have files tagged.

       ftpfs_retry_seconds
              This value is the number  of  seconds  the  Midnight  Commander  will  wait  before
              attempting  to  reconnect to an FTP server that has denied the login.  If the value
              is zero, the login will no be retried.

       max_dirt_limit
              Specifies how many screen updates can be skipped  at  most  in  the  internal  file
              viewer.   Normally  this  value  is not significant, because the code automatically
              adjusts the number of updates to skip according to the rate of incoming keystrokes.
              However, on very slow machines or terminals with a fast keyboard auto repeat, a big
              value can make screen updates too jumpy.

              It seems that setting max_dirt_limit to 10 causes the best behavior,  and  that  is
              the default value.

       mouse_move_pages_viewer
              Controls  if  scrolling  with  the  mouse  is  done by pages or line by line on the
              internal file viewer.

       only_leading_plus_minus
              Allow special treatment for '+', '-', '*' in the command  line  (select,  unselect,
              reverse  selection)  only  if  the  command line is empty.  You don't need to quote
              those characters in the middle of the command line.  On the other hand, you  cannot
              use them to change selection when the command line is not empty.

       show_output_starts_shell
              This  variable  only works if you are not using the subshell support.  When you use
              the C-o keystroke to go back to the user screen, if this one is set, you will get a
              fresh  shell.   Otherwise,  pressing  any  key  will bring you back to the Midnight
              Commander.

       timeformat_recent
              Change the time format used to display dates less than  6  months  from  now.   See
              strftime  or  date man page for the format specification. If this option is absent,
              default timeformat is used.

       timeformat_old
              Change the time format used to display  dates older than 6 months from now  or  for
              dates  in  the future.  See strftime or date man page for the format specification.
              If this option is absent, default timeformat is used.

       torben_fj_mode
              If this flag is set, then the home and end keys will work slightly different on the
              panels,  instead of moving the selection to the first and last files in the panels,
              they will act as follows:

              The home key will: Go up to the middle line, if below it; else go to the  top  line
              unless  it is already on the top line, in this case it will go to the first file in
              the panel.

              The end key has a similar behavior: Go down to the middle line, if over it; else go
              to  the bottom line unless you already are at the bottom line, in such case it will
              move the selection to the last file name in the panel.

       use_file_to_guess_type
              If this variable is on (the default) it will spawn the file command  to  match  the
              file types listed on the mc.ext file.

       xtree_mode
              If  this  variable is on (default is off) when you browse the file system on a Tree
              panel, it will automatically reload the  other  panel  with  the  contents  of  the
              selected directory.

       fish_directory_timeout
              This variable holds the lifetime of a directory cache entry in seconds. The default
              value is 900 seconds.

       clipboard_store
              This variable contains path (with options) to the external clipboard  utility  like
              'xclip' to read text into X selection from file.  For example:

       clipboard_store=xclip -i

       clipboard_paste
              This  variable  contains path (with options) to the external clipboard utility like
              'xclip' to print the selection to standard out.  For example:

       clipboard_paste=xclip -o

       autodetect_codeset
              This option allows use the `enca' command to autodetect codeset of  text  files  in
              internal  viewer and editor. List of valid values can be obtain by the `enca --list
              languages | cut -d : -f1' command. Option must be located in the [Misc] section.

       For example:

       autodetect_codeset=russian

Parameters for external editor or viewer

       The Midnight Commander provides a way for specify an  options  for  external  editors  and
       viewers.  The  Midnight  Commander  tries  to  search  the  "[External  editor  or  viewer
       parameters]" section in the system initialization file (the mc.lib  file  located  in  the
       Midnight  Commander  library  directory) and then in the ~/.config/mc/ini file. The option
       name should be equal to the name (full pathname) of external editor or viewer. The  option
       value can contain following variables:

       %filename

              The filename to edit/view.

       %lineno

              The start line in the opening file.

       For example:

       [External editor or viewer parameters]
           vi=%filename +%lineno
           joe=%filename +%lineno
           more=%filename +%lineno

Terminal databases

       The  Midnight  Commander  provides  a  way  to  fix  your system terminal database without
       requiring root privileges.  The Midnight Commander searches in the  system  initialization
       file  (the  mc.lib  file  located  in the Midnight Commander library directory) and in the
       ~/.config/mc/ini file for the  section  "terminal:your-terminal-name"  and  then  for  the
       section  "terminal:general",  each line of the section contains a key symbol that you want
       to define, followed by an equal sign and the definition for the  key.   You  can  use  the
       special  \e  form  to represent the escape character and the ^x to represent the control-x
       character.

       The possible key symbols are:

       f0 to f20     Function keys f0-f20
       bs            backspace
       home          home key
       end           end key
       up            up arrow key
       down          down arrow key
       left          left arrow key
       right         right arrow key
       pgdn          page down key
       pgup          page up key
       insert        the insert character
       delete        the delete character
       complete      to do completion

       For example, to define the key insert to be the Escape + [ + O + p, you set  this  in  the
       ini file:

       insert=\e[Op

       Also now you can use extended learn keys.  For example:

           ctrl-alt-right=\e[[1;6C
           ctrl-alt-left=\e[[1;6D

       This  means  that  ctrl+alt+left  sends  a \e[[1;6D escape sequence and therefore Midnight
       Commander interprets "\e[[1;6D" as Ctrl-Alt-Left.

       The complete key symbol represents the escape sequences  used  to  invoke  the  completion
       process,  this  is invoked with Alt-tab, but you can define other keys to do the same work
       (on those keyboard with tons of nice and unused keys everywhere).

FILES

       Full paths below may vary between installations.  They are also affected by the MC_DATADIR
       environment variable. If it's set, its value is used instead of /usr/share/mc in the paths
       below.

       /usr/share/mc/mc.hlp

              The help file for the program.

       /usr/share/mc/mc.ext

              The default system-wide extensions file.

       ~/.config/mc/mc.ext

              User's own  extension,  view  configuration  and  edit  configuration  file.   They
              override the contents of the system wide files if present.

       /usr/share/mc/mc.ini

              The  default  system-wide  setup  for the Midnight Commander, used only if the user
              doesn't have his own ~/.config/mc/ini file.

       /usr/share/mc/mc.lib

              Global settings for the Midnight Commander.   Settings  in  this  file  affect  all
              users,  whether  they  have  ~/.config/mc/ini  or  not.   Currently,  only terminal
              settings are loaded from mc.lib.

       ~/.config/mc/ini

              User's own setup. If this file is present  then  the  setup  is  loaded  from  here
              instead of the system-wide startup file.

       /usr/share/mc/mc.hint

              This file contains the hints displayed by the program.

       /usr/share/mc/mc.menu

              This file contains the default system-wide applications menu.

       ~/.config/mc/menu

              User's  own  application  menu.  If  this file is present it is used instead of the
              system-wide applications menu.

       ~/.cache/mc/Tree

              The directory list for the directory tree and tree view features.

       ~/.local/share/mc.menu

              Local user-defined menu. If this file is present, it is used instead of the home or
              system-wide applications menu.

       To  change  default  root  directory  of MC, you can use MC_HOME environment variable. The
       value of MC_HOME must be an absolute path. If MC_HOME is unset or empty, HOME variable  is
       used. If HOME is unset or empty, MC directories are get from GLib library.

LICENSE

       This program is distributed under the terms of the GNU General Public License as published
       by the Free Software Foundation. See the built-in help for details on the License and  the
       lack of warranty.

AVAILABILITY

       The latest version of this program can be found at http://ftp.midnight-commander.org/.

SEE ALSO

       ed(1), gpm(1), terminfo(1), view(1), sh(1), bash(1), tcsh(1), zsh(1).

       The Midnight Commander page on the World Wide Web:
            http://www.midnight-commander.org/

AUTHORS

       Authors and contributors are listed in the AUTHORS file in the source distribution.

BUGS

       See the file TODO in the distribution for information on what remains to be done.

       If   you  want  to  report  a  problem  with  the  program,  please  create  bugreport  at
       http://www.midnight-commander.org/.

       Provide a detailed description of the bug, the version of the program you are running  (mc
       -V  displays  this  information), the operating system you are running the program on.  If
       the program crashes, we would appreciate a stack trace.