Provided by: perl-doc_5.18.2-2ubuntu1.7_all bug

NAME

       perl5101delta - what is new for perl v5.10.1

DESCRIPTION

       This document describes differences between the 5.10.0 release and the 5.10.1 release.

       If you are upgrading from an earlier release such as 5.8.8, first read the perl5100delta,
       which describes differences between 5.8.8 and 5.10.0

Incompatible Changes

   Switch statement changes
       The handling of complex expressions by the "given"/"when" switch statement has been
       enhanced. There are two new cases where "when" now interprets its argument as a boolean,
       instead of an expression to be used in a smart match:

       flip-flop operators
           The ".." and "..." flip-flop operators are now evaluated in boolean context, following
           their usual semantics; see "Range Operators" in perlop.

           Note that, as in perl 5.10.0, "when (1..10)" will not work to test whether a given
           value is an integer between 1 and 10; you should use "when ([1..10])" instead (note
           the array reference).

           However, contrary to 5.10.0, evaluating the flip-flop operators in boolean context
           ensures it can now be useful in a "when()", notably for implementing bistable
           conditions, like in:

               when (/^=begin/ .. /^=end/) {
                 # do something
               }

       defined-or operator
           A compound expression involving the defined-or operator, as in "when (expr1 //
           expr2)", will be treated as boolean if the first expression is boolean. (This just
           extends the existing rule that applies to the regular or operator, as in "when (expr1
           || expr2)".)

       The next section details more changes brought to the semantics to the smart match
       operator, that naturally also modify the behaviour of the switch statements where smart
       matching is implicitly used.

   Smart match changes
       Changes to type-based dispatch

       The smart match operator "~~" is no longer commutative. The behaviour of a smart match now
       depends primarily on the type of its right hand argument. Moreover, its semantics have
       been adjusted for greater consistency or usefulness in several cases. While the general
       backwards compatibility is maintained, several changes must be noted:

       •   Code references with an empty prototype are no longer treated specially.  They are
           passed an argument like the other code references (even if they choose to ignore it).

       •   "%hash ~~ sub {}" and "@array ~~ sub {}" now test that the subroutine returns a true
           value for each key of the hash (or element of the array), instead of passing the whole
           hash or array as a reference to the subroutine.

       •   Due to the commutativity breakage, code references are no longer treated specially
           when appearing on the left of the "~~" operator, but like any vulgar scalar.

       •   "undef ~~ %hash" is always false (since "undef" can't be a key in a hash). No implicit
           conversion to "" is done (as was the case in perl 5.10.0).

       •   "$scalar ~~ @array" now always distributes the smart match across the elements of the
           array. It's true if one element in @array verifies "$scalar ~~ $element". This is a
           generalization of the old behaviour that tested whether the array contained the
           scalar.

       The full dispatch table for the smart match operator is given in "Smart matching in
       detail" in perlsyn.

       Smart match and overloading

       According to the rule of dispatch based on the rightmost argument type, when an object
       overloading "~~" appears on the right side of the operator, the overload routine will
       always be called (with a 3rd argument set to a true value, see overload.) However, when
       the object will appear on the left, the overload routine will be called only when the
       rightmost argument is a simple scalar. This way distributivity of smart match across
       arrays is not broken, as well as the other behaviours with complex types (coderefs,
       hashes, regexes). Thus, writers of overloading routines for smart match mostly need to
       worry only with comparing against a scalar, and possibly with stringification overloading;
       the other common cases will be automatically handled consistently.

       "~~" will now refuse to work on objects that do not overload it (in order to avoid relying
       on the object's underlying structure). (However, if the object overloads the
       stringification or the numification operators, and if overload fallback is active, it will
       be used instead, as usual.)

   Other incompatible changes
       •   The semantics of "use feature :5.10*" have changed slightly.  See "Modules and
           Pragmata" for more information.

       •   It is now a run-time error to use the smart match operator "~~" with an object that
           has no overload defined for it. (This way "~~" will not break encapsulation by
           matching against the object's internal representation as a reference.)

       •   The version control system used for the development of the perl interpreter has been
           switched from Perforce to git.  This is mainly an internal issue that only affects
           people actively working on the perl core; but it may have minor external visibility,
           for example in some of details of the output of "perl -V". See perlrepository for more
           information.

       •   The internal structure of the "ext/" directory in the perl source has been
           reorganised. In general, a module "Foo::Bar" whose source was stored under
           ext/Foo/Bar/ is now located under ext/Foo-Bar/. Also, some modules have been moved
           from lib/ to ext/. This is purely a source tarball change, and should make no
           difference to the compilation or installation of perl, unless you have a very
           customised build process that explicitly relies on this structure, or which hard-codes
           the "nonxs_ext" Configure parameter. Specifically, this change does not by default
           alter the location of any files in the final installation.

       •   As part of the "Test::Harness" 2.x to 3.x upgrade, the experimental
           "Test::Harness::Straps" module has been removed.  See "Updated Modules" for more
           details.

       •   As part of the "ExtUtils::MakeMaker" upgrade, the "ExtUtils::MakeMaker::bytes" and
           "ExtUtils::MakeMaker::vmsish" modules have been removed from this distribution.

       •   "Module::CoreList" no longer contains the %:patchlevel hash.

       •   This one is actually a change introduced in 5.10.0, but it was missed from that
           release's perldelta, so it is mentioned here instead.

           A bugfix related to the handling of the "/m" modifier and "qr" resulted in a change of
           behaviour between 5.8.x and 5.10.0:

               # matches in 5.8.x, doesn't match in 5.10.0
               $re = qr/^bar/; "foo\nbar" =~ /$re/m;

Core Enhancements

   Unicode Character Database 5.1.0
       The copy of the Unicode Character Database included in Perl 5.10.1 has been updated to
       5.1.0 from 5.0.0. See <http://www.unicode.org/versions/Unicode5.1.0/#Notable_Changes> for
       the notable changes.

   A proper interface for pluggable Method Resolution Orders
       As of Perl 5.10.1 there is a new interface for plugging and using method resolution orders
       other than the default (linear depth first search).  The C3 method resolution order added
       in 5.10.0 has been re-implemented as a plugin, without changing its Perl-space interface.
       See perlmroapi for more information.

   The "overloading" pragma
       This pragma allows you to lexically disable or enable overloading for some or all
       operations. (Yuval Kogman)

   Parallel tests
       The core distribution can now run its regression tests in parallel on Unix-like platforms.
       Instead of running "make test", set "TEST_JOBS" in your environment to the number of tests
       to run in parallel, and run "make test_harness". On a Bourne-like shell, this can be done
       as

           TEST_JOBS=3 make test_harness  # Run 3 tests in parallel

       An environment variable is used, rather than parallel make itself, because TAP::Harness
       needs to be able to schedule individual non-conflicting test scripts itself, and there is
       no standard interface to "make" utilities to interact with their job schedulers.

       Note that currently some test scripts may fail when run in parallel (most notably
       "ext/IO/t/io_dir.t"). If necessary run just the failing scripts again sequentially and see
       if the failures go away.

   DTrace support
       Some support for DTrace has been added. See "DTrace support" in INSTALL.

   Support for "configure_requires" in CPAN module metadata
       Both "CPAN" and "CPANPLUS" now support the "configure_requires" keyword in the "META.yml"
       metadata file included in most recent CPAN distributions.  This allows distribution
       authors to specify configuration prerequisites that must be installed before running
       Makefile.PL or Build.PL.

       See the documentation for "ExtUtils::MakeMaker" or "Module::Build" for more on how to
       specify "configure_requires" when creating a distribution for CPAN.

Modules and Pragmata

   New Modules and Pragmata
       "autodie"
           This is a new lexically-scoped alternative for the "Fatal" module.  The bundled
           version is 2.06_01. Note that in this release, using a string eval when "autodie" is
           in effect can cause the autodie behaviour to leak into the surrounding scope. See
           "BUGS" in autodie for more details.

       "Compress::Raw::Bzip2"
           This has been added to the core (version 2.020).

       "parent"
           This pragma establishes an ISA relationship with base classes at compile time. It
           provides the key feature of "base" without the feature creep.

       "Parse::CPAN::Meta"
           This has been added to the core (version 1.39).

   Pragmata Changes
       "attributes"
           Upgraded from version 0.08 to 0.09.

       "attrs"
           Upgraded from version 1.02 to 1.03.

       "base"
           Upgraded from version 2.13 to 2.14. See parent for a replacement.

       "bigint"
           Upgraded from version 0.22 to 0.23.

       "bignum"
           Upgraded from version 0.22 to 0.23.

       "bigrat"
           Upgraded from version 0.22 to 0.23.

       "charnames"
           Upgraded from version 1.06 to 1.07.

           The Unicode NameAliases.txt database file has been added. This has the effect of
           adding some extra "\N" character names that formerly wouldn't have been recognised;
           for example, "\N{LATIN CAPITAL LETTER GHA}".

       "constant"
           Upgraded from version 1.13 to 1.17.

       "feature"
           The meaning of the ":5.10" and ":5.10.X" feature bundles has changed slightly. The
           last component, if any (i.e. "X") is simply ignored.  This is predicated on the
           assumption that new features will not, in general, be added to maintenance releases.
           So ":5.10" and ":5.10.X" have identical effect. This is a change to the behaviour
           documented for 5.10.0.

       "fields"
           Upgraded from version 2.13 to 2.14 (this was just a version bump; there were no
           functional changes).

       "lib"
           Upgraded from version 0.5565 to 0.62.

       "open"
           Upgraded from version 1.06 to 1.07.

       "overload"
           Upgraded from version 1.06 to 1.07.

       "overloading"
           See "The "overloading" pragma" above.

       "version"
           Upgraded from version 0.74 to 0.77.

   Updated Modules
       "Archive::Extract"
           Upgraded from version 0.24 to 0.34.

       "Archive::Tar"
           Upgraded from version 1.38 to 1.52.

       "Attribute::Handlers"
           Upgraded from version 0.79 to 0.85.

       "AutoLoader"
           Upgraded from version 5.63 to 5.68.

       "AutoSplit"
           Upgraded from version 1.05 to 1.06.

       "B" Upgraded from version 1.17 to 1.22.

       "B::Debug"
           Upgraded from version 1.05 to 1.11.

       "B::Deparse"
           Upgraded from version 0.83 to 0.89.

       "B::Lint"
           Upgraded from version 1.09 to 1.11.

       "B::Xref"
           Upgraded from version 1.01 to 1.02.

       "Benchmark"
           Upgraded from version 1.10 to 1.11.

       "Carp"
           Upgraded from version 1.08 to 1.11.

       "CGI"
           Upgraded from version 3.29 to 3.43.  (also includes the "default_value for
           popup_menu()" fix from 3.45).

       "Compress::Zlib"
           Upgraded from version 2.008 to 2.020.

       "CPAN"
           Upgraded from version 1.9205 to 1.9402. "CPAN::FTP" has a local fix to stop it being
           too verbose on download failure.

       "CPANPLUS"
           Upgraded from version 0.84 to 0.88.

       "CPANPLUS::Dist::Build"
           Upgraded from version 0.06_02 to 0.36.

       "Cwd"
           Upgraded from version 3.25_01 to 3.30.

       "Data::Dumper"
           Upgraded from version 2.121_14 to 2.124.

       "DB"
           Upgraded from version 1.01 to 1.02.

       "DB_File"
           Upgraded from version 1.816_1 to 1.820.

       "Devel::PPPort"
           Upgraded from version 3.13 to 3.19.

       "Digest::MD5"
           Upgraded from version 2.36_01 to 2.39.

       "Digest::SHA"
           Upgraded from version 5.45 to 5.47.

       "DirHandle"
           Upgraded from version 1.01 to 1.03.

       "Dumpvalue"
           Upgraded from version 1.12 to 1.13.

       "DynaLoader"
           Upgraded from version 1.08 to 1.10.

       "Encode"
           Upgraded from version 2.23 to 2.35.

       "Errno"
           Upgraded from version 1.10 to 1.11.

       "Exporter"
           Upgraded from version 5.62 to 5.63.

       "ExtUtils::CBuilder"
           Upgraded from version 0.21 to 0.2602.

       "ExtUtils::Command"
           Upgraded from version 1.13 to 1.16.

       "ExtUtils::Constant"
           Upgraded from 0.20 to 0.22. (Note that neither of these versions are available on
           CPAN.)

       "ExtUtils::Embed"
           Upgraded from version 1.27 to 1.28.

       "ExtUtils::Install"
           Upgraded from version 1.44 to 1.54.

       "ExtUtils::MakeMaker"
           Upgraded from version 6.42 to 6.55_02.

           Note that "ExtUtils::MakeMaker::bytes" and "ExtUtils::MakeMaker::vmsish" have been
           removed from this distribution.

       "ExtUtils::Manifest"
           Upgraded from version 1.51_01 to 1.56.

       "ExtUtils::ParseXS"
           Upgraded from version 2.18_02 to 2.2002.

       "Fatal"
           Upgraded from version 1.05 to 2.06_01. See also the new pragma "autodie".

       "File::Basename"
           Upgraded from version 2.76 to 2.77.

       "File::Compare"
           Upgraded from version 1.1005 to 1.1006.

       "File::Copy"
           Upgraded from version 2.11 to 2.14.

       "File::Fetch"
           Upgraded from version 0.14 to 0.20.

       "File::Find"
           Upgraded from version 1.12 to 1.14.

       "File::Path"
           Upgraded from version 2.04 to 2.07_03.

       "File::Spec"
           Upgraded from version 3.2501 to 3.30.

       "File::stat"
           Upgraded from version 1.00 to 1.01.

       "File::Temp"
           Upgraded from version 0.18 to 0.22.

       "FileCache"
           Upgraded from version 1.07 to 1.08.

       "FileHandle"
           Upgraded from version 2.01 to 2.02.

       "Filter::Simple"
           Upgraded from version 0.82 to 0.84.

       "Filter::Util::Call"
           Upgraded from version 1.07 to 1.08.

       "FindBin"
           Upgraded from version 1.49 to 1.50.

       "GDBM_File"
           Upgraded from version 1.08 to 1.09.

       "Getopt::Long"
           Upgraded from version 2.37 to 2.38.

       "Hash::Util::FieldHash"
           Upgraded from version 1.03 to 1.04. This fixes a memory leak.

       "I18N::Collate"
           Upgraded from version 1.00 to 1.01.

       "IO"
           Upgraded from version 1.23_01 to 1.25.

           This makes non-blocking mode work on Windows in "IO::Socket::INET" [CPAN #43573].

       "IO::Compress::*"
           Upgraded from version 2.008 to 2.020.

       "IO::Dir"
           Upgraded from version 1.06 to 1.07.

       "IO::Handle"
           Upgraded from version 1.27 to 1.28.

       "IO::Socket"
           Upgraded from version 1.30_01 to 1.31.

       "IO::Zlib"
           Upgraded from version 1.07 to 1.09.

       "IPC::Cmd"
           Upgraded from version 0.40_1 to 0.46.

       "IPC::Open3"
           Upgraded from version 1.02 to 1.04.

       "IPC::SysV"
           Upgraded from version 1.05 to 2.01.

       "lib"
           Upgraded from version 0.5565 to 0.62.

       "List::Util"
           Upgraded from version 1.19 to 1.21.

       "Locale::MakeText"
           Upgraded from version 1.12 to 1.13.

       "Log::Message"
           Upgraded from version 0.01 to 0.02.

       "Math::BigFloat"
           Upgraded from version 1.59 to 1.60.

       "Math::BigInt"
           Upgraded from version 1.88 to 1.89.

       "Math::BigInt::FastCalc"
           Upgraded from version 0.16 to 0.19.

       "Math::BigRat"
           Upgraded from version 0.21 to 0.22.

       "Math::Complex"
           Upgraded from version 1.37 to 1.56.

       "Math::Trig"
           Upgraded from version 1.04 to 1.20.

       "Memoize"
           Upgraded from version 1.01_02 to 1.01_03 (just a minor documentation change).

       "Module::Build"
           Upgraded from version 0.2808_01 to 0.34_02.

       "Module::CoreList"
           Upgraded from version 2.13 to 2.18. This release no longer contains the
           %Module::CoreList::patchlevel hash.

       "Module::Load"
           Upgraded from version 0.12 to 0.16.

       "Module::Load::Conditional"
           Upgraded from version 0.22 to 0.30.

       "Module::Loaded"
           Upgraded from version 0.01 to 0.02.

       "Module::Pluggable"
           Upgraded from version 3.6 to 3.9.

       "NDBM_File"
           Upgraded from version 1.07 to 1.08.

       "Net::Ping"
           Upgraded from version 2.33 to 2.36.

       "NEXT"
           Upgraded from version 0.60_01 to 0.64.

       "Object::Accessor"
           Upgraded from version 0.32 to 0.34.

       "OS2::REXX"
           Upgraded from version 1.03 to 1.04.

       "Package::Constants"
           Upgraded from version 0.01 to 0.02.

       "PerlIO"
           Upgraded from version 1.04 to 1.06.

       "PerlIO::via"
           Upgraded from version 0.04 to 0.07.

       "Pod::Man"
           Upgraded from version 2.16 to 2.22.

       "Pod::Parser"
           Upgraded from version 1.35 to 1.37.

       "Pod::Simple"
           Upgraded from version 3.05 to 3.07.

       "Pod::Text"
           Upgraded from version 3.08 to 3.13.

       "POSIX"
           Upgraded from version 1.13 to 1.17.

       "Safe"
           Upgraded from 2.12 to 2.18.

       "Scalar::Util"
           Upgraded from version 1.19 to 1.21.

       "SelectSaver"
           Upgraded from 1.01 to 1.02.

       "SelfLoader"
           Upgraded from 1.11 to 1.17.

       "Socket"
           Upgraded from 1.80 to 1.82.

       "Storable"
           Upgraded from 2.18 to 2.20.

       "Switch"
           Upgraded from version 2.13 to 2.14. Please see "Deprecations".

       "Symbol"
           Upgraded from version 1.06 to 1.07.

       "Sys::Syslog"
           Upgraded from version 0.22 to 0.27.

       "Term::ANSIColor"
           Upgraded from version 1.12 to 2.00.

       "Term::ReadLine"
           Upgraded from version 1.03 to 1.04.

       "Term::UI"
           Upgraded from version 0.18 to 0.20.

       "Test::Harness"
           Upgraded from version 2.64 to 3.17.

           Note that one side-effect of the 2.x to 3.x upgrade is that the experimental
           "Test::Harness::Straps" module (and its supporting "Assert", "Iterator", "Point" and
           "Results" modules) have been removed. If you still need this, then they are available
           in the (unmaintained) "Test-Harness-Straps" distribution on CPAN.

       "Test::Simple"
           Upgraded from version 0.72 to 0.92.

       "Text::ParseWords"
           Upgraded from version 3.26 to 3.27.

       "Text::Tabs"
           Upgraded from version 2007.1117 to 2009.0305.

       "Text::Wrap"
           Upgraded from version 2006.1117 to 2009.0305.

       "Thread::Queue"
           Upgraded from version 2.00 to 2.11.

       "Thread::Semaphore"
           Upgraded from version 2.01 to 2.09.

       "threads"
           Upgraded from version 1.67 to 1.72.

       "threads::shared"
           Upgraded from version 1.14 to 1.29.

       "Tie::RefHash"
           Upgraded from version 1.37 to 1.38.

       "Tie::StdHandle"
           This has documentation changes, and has been assigned a version for the first time:
           version 4.2.

       "Time::HiRes"
           Upgraded from version 1.9711 to 1.9719.

       "Time::Local"
           Upgraded from version 1.18 to 1.1901.

       "Time::Piece"
           Upgraded from version 1.12 to 1.15.

       "Unicode::Normalize"
           Upgraded from version 1.02 to 1.03.

       "Unicode::UCD"
           Upgraded from version 0.25 to 0.27.

           "charinfo()" now works on Unified CJK code points added to later versions of Unicode.

           "casefold()" has new fields returned to provide both a simpler interface and
           previously missing information. The old fields are retained for backwards
           compatibility. Information about Turkic-specific code points is now returned.

           The documentation has been corrected and expanded.

       "UNIVERSAL"
           Upgraded from version 1.04 to 1.05.

       "Win32"
           Upgraded from version 0.34 to 0.39.

       "Win32API::File"
           Upgraded from version 0.1001_01 to 0.1101.

       "XSLoader"
           Upgraded from version 0.08 to 0.10.

Utility Changes

       h2ph
           Now looks in "include-fixed" too, which is a recent addition to gcc's search path.

       h2xs
           No longer incorrectly treats enum values like macros (Daniel Burr).

           Now handles C++ style constants ("//") properly in enums. (A patch from Rainer
           Weikusat was used; Daniel Burr also proposed a similar fix).

       perl5db.pl
           "LVALUE" subroutines now work under the debugger.

           The debugger now correctly handles proxy constant subroutines, and subroutine stubs.

       perlthanks
           Perl 5.10.1 adds a new utility perlthanks, which is a variant of perlbug, but for
           sending non-bug-reports to the authors and maintainers of Perl. Getting nothing but
           bug reports can become a bit demoralising: we'll see if this changes things.

New Documentation

       perlhaiku
           This contains instructions on how to build perl for the Haiku platform.

       perlmroapi
           This describes the new interface for pluggable Method Resolution Orders.

       perlperf
           This document, by Richard Foley, provides an introduction to the use of performance
           and optimization techniques which can be used with particular reference to perl
           programs.

       perlrepository
           This describes how to access the perl source using the git version control system.

       perlthanks
           This describes the new perlthanks utility.

Changes to Existing Documentation

       The various large "Changes*" files (which listed every change made to perl over the last
       18 years) have been removed, and replaced by a small file, also called "Changes", which
       just explains how that same information may be extracted from the git version control
       system.

       The file Porting/patching.pod has been deleted, as it mainly described interacting with
       the old Perforce-based repository, which is now obsolete.  Information still relevant has
       been moved to perlrepository.

       perlapi, perlintern, perlmodlib and perltoc are now all generated at build time, rather
       than being shipped as part of the release.

Performance Enhancements

       •   A new internal cache means that "isa()" will often be faster.

       •   Under "use locale", the locale-relevant information is now cached on read-only values,
           such as the list returned by "keys %hash". This makes operations such as "sort keys
           %hash" in the scope of "use locale" much faster.

       •   Empty "DESTROY" methods are no longer called.

Installation and Configuration Improvements

   ext/ reorganisation
       The layout of directories in ext has been revised. Specifically, all extensions are now
       flat, and at the top level, with "/" in pathnames replaced by "-", so that
       ext/Data/Dumper/ is now ext/Data-Dumper/, etc.  The names of the extensions as specified
       to Configure, and as reported by %Config::Config under the keys "dynamic_ext",
       "known_extensions", "nonxs_ext" and "static_ext" have not changed, and still use "/".
       Hence this change will not have any affect once perl is installed. However,
       "Attribute::Handlers", "Safe" and "mro" have now become extensions in their own right, so
       if you run Configure with options to specify an exact list of extensions to build, you
       will need to change it to account for this.

       For 5.10.2, it is planned that many dual-life modules will have been moved from lib to
       ext; again this will have no effect on an installed perl, but will matter if you invoke
       Configure with a pre-canned list of extensions to build.

   Configuration improvements
       If "vendorlib" and "vendorarch" are the same, then they are only added to @INC once.

       $Config{usedevel} and the C-level "PERL_USE_DEVEL" are now defined if perl is built with
       "-Dusedevel".

       Configure will enable use of "-fstack-protector", to provide protection against stack-
       smashing attacks, if the compiler supports it.

       Configure will now determine the correct prototypes for re-entrant functions, and for
       "gconvert", if you are using a C++ compiler rather than a C compiler.

       On Unix, if you build from a tree containing a git repository, the configuration process
       will note the commit hash you have checked out, for display in the output of "perl -v" and
       "perl -V". Unpushed local commits are automatically added to the list of local patches
       displayed by "perl -V".

   Compilation improvements
       As part of the flattening of ext, all extensions on all platforms are built by
       make_ext.pl. This replaces the Unix-specific ext/util/make_ext, VMS-specific make_ext.com
       and Win32-specific win32/buildext.pl.

   Platform Specific Changes
       AIX Removed libbsd for AIX 5L and 6.1. Only flock() was used from libbsd.

           Removed libgdbm for AIX 5L and 6.1. The libgdbm is delivered as an optional package
           with the AIX Toolbox. Unfortunately the 64 bit version is broken.

           Hints changes mean that AIX 4.2 should work again.

       Cygwin
           On Cygwin we now strip the last number from the DLL. This has been the behaviour in
           the cygwin.com build for years. The hints files have been updated.

       FreeBSD
           The hints files now identify the correct threading libraries on FreeBSD 7 and later.

       Irix
           We now work around a bizarre preprocessor bug in the Irix 6.5 compiler: "cc -E -"
           unfortunately goes into K&R mode, but "cc -E file.c" doesn't.

       Haiku
           Patches from the Haiku maintainers have been merged in. Perl should now build on
           Haiku.

       MirOS BSD
           Perl should now build on MirOS BSD.

       NetBSD
           Hints now supports versions 5.*.

       Stratus VOS
           Various changes from Stratus have been merged in.

       Symbian
           There is now support for Symbian S60 3.2 SDK and S60 5.0 SDK.

       Win32
           Improved message window handling means that "alarm" and "kill" messages will no longer
           be dropped under race conditions.

       VMS Reads from the in-memory temporary files of "PerlIO::scalar" used to fail if $/ was
           set to a numeric reference (to indicate record-style reads).  This is now fixed.

           VMS now supports "getgrgid".

           Many improvements and cleanups have been made to the VMS file name handling and
           conversion code.

           Enabling the "PERL_VMS_POSIX_EXIT" logical name now encodes a POSIX exit status in a
           VMS condition value for better interaction with GNV's bash shell and other utilities
           that depend on POSIX exit values.  See "$?" in perlvms for details.

Selected Bug Fixes

       •   5.10.0 inadvertently disabled an optimisation, which caused a measurable performance
           drop in list assignment, such as is often used to assign function parameters from @_.
           The optimisation has been re-instated, and the performance regression fixed.

       •   Fixed memory leak on "while (1) { map 1, 1 }" [RT #53038].

       •   Some potential coredumps in PerlIO fixed [RT #57322,54828].

       •   The debugger now works with lvalue subroutines.

       •   The debugger's "m" command was broken on modules that defined constants [RT #61222].

       •   "crypt()" and string complement could return tainted values for untainted arguments
           [RT #59998].

       •   The "-i.suffix" command-line switch now recreates the file using restricted
           permissions, before changing its mode to match the original file. This eliminates a
           potential race condition [RT #60904].

       •   On some Unix systems, the value in $? would not have the top bit set ("$? & 128") even
           if the child core dumped.

       •   Under some circumstances, $^R could incorrectly become undefined [RT #57042].

       •   (XS) In various hash functions, passing a pre-computed hash to when the key is UTF-8
           might result in an incorrect lookup.

       •   (XS) Including XSUB.h before perl.h gave a compile-time error [RT #57176].

       •   "$object->isa('Foo')" would report false if the package "Foo" didn't exist, even if
           the object's @ISA contained "Foo".

       •   Various bugs in the new-to 5.10.0 mro code, triggered by manipulating @ISA, have been
           found and fixed.

       •   Bitwise operations on references could crash the interpreter, e.g.  "$x=\$y; $x |=
           "foo"" [RT #54956].

       •   Patterns including alternation might be sensitive to the internal UTF-8
           representation, e.g.

               my $byte = chr(192);
               my $utf8 = chr(192); utf8::upgrade($utf8);
               $utf8 =~ /$byte|X}/i;       # failed in 5.10.0

       •   Within UTF8-encoded Perl source files (i.e. where "use utf8" is in effect), double-
           quoted literal strings could be corrupted where a "\xNN", "\0NNN" or "\N{}" is
           followed by a literal character with ordinal value greater than 255 [RT #59908].

       •   "B::Deparse" failed to correctly deparse various constructs: "readpipe STRING" [RT
           #62428], "CORE::require(STRING)" [RT #62488], "sub foo(_)" [RT #62484].

       •   Using "setpgrp()" with no arguments could corrupt the perl stack.

       •   The block form of "eval" is now specifically trappable by "Safe" and "ops".
           Previously it was erroneously treated like string "eval".

       •   In 5.10.0, the two characters "[~" were sometimes parsed as the smart match operator
           ("~~") [RT #63854].

       •   In 5.10.0, the "*" quantifier in patterns was sometimes treated as "{0,32767}" [RT
           #60034, #60464]. For example, this match would fail:

               ("ab" x 32768) =~ /^(ab)*$/

       •   "shmget" was limited to a 32 bit segment size on a 64 bit OS [RT #63924].

       •   Using "next" or "last" to exit a "given" block no longer produces a spurious warning
           like the following:

               Exiting given via last at foo.pl line 123

       •   On Windows, '.\foo' and '..\foo'  were treated differently than './foo' and '../foo'
           by "do" and "require" [RT #63492].

       •   Assigning a format to a glob could corrupt the format; e.g.:

                *bar=*foo{FORMAT}; # foo format now bad

       •   Attempting to coerce a typeglob to a string or number could cause an assertion
           failure. The correct error message is now generated, "Can't coerce GLOB to $type".

       •   Under "use filetest 'access'", "-x" was using the wrong access mode. This has been
           fixed [RT #49003].

       •   "length" on a tied scalar that returned a Unicode value would not be correct the first
           time. This has been fixed.

       •   Using an array "tie" inside in array "tie" could SEGV. This has been fixed. [RT
           #51636]

       •   A race condition inside "PerlIOStdio_close()" has been identified and fixed. This used
           to cause various threading issues, including SEGVs.

       •   In "unpack", the use of "()" groups in scalar context was internally placing a list on
           the interpreter's stack, which manifested in various ways, including SEGVs.  This is
           now fixed [RT #50256].

       •   Magic was called twice in "substr", "\&$x", "tie $x, $m" and "chop".  These have all
           been fixed.

       •   A 5.10.0 optimisation to clear the temporary stack within the implicit loop of
           "s///ge" has been reverted, as it turned out to be the cause of obscure bugs in
           seemingly unrelated parts of the interpreter [commit ef0d4e17921ee3de].

       •   The line numbers for warnings inside "elsif" are now correct.

       •   The ".." operator now works correctly with ranges whose ends are at or close to the
           values of the smallest and largest integers.

       •   "binmode STDIN, ':raw'" could lead to segmentation faults on some platforms.  This has
           been fixed [RT #54828].

       •   An off-by-one error meant that "index $str, ..." was effectively being executed as
           "index "$str\0", ...". This has been fixed [RT #53746].

       •   Various leaks associated with named captures in regexes have been fixed [RT #57024].

       •   A weak reference to a hash would leak. This was affecting "DBI" [RT #56908].

       •   Using (?|) in a regex could cause a segfault [RT #59734].

       •   Use of a UTF-8 "tr//" within a closure could cause a segfault [RT #61520].

       •   Calling "sv_chop()" or otherwise upgrading an SV could result in an unaligned 64-bit
           access on the SPARC architecture [RT #60574].

       •   In the 5.10.0 release, "inc_version_list" would incorrectly list "5.10.*" after
           "5.8.*"; this affected the @INC search order [RT #67628].

       •   In 5.10.0, "pack "a*", $tainted_value" returned a non-tainted value [RT #52552].

       •   In 5.10.0, "printf" and "sprintf" could produce the fatal error "panic:
           utf8_mg_pos_cache_update" when printing UTF-8 strings [RT #62666].

       •   In the 5.10.0 release, a dynamically created "AUTOLOAD" method might be missed (method
           cache issue) [RT #60220,60232].

       •   In the 5.10.0 release, a combination of "use feature" and "//ee" could cause a memory
           leak [RT #63110].

       •   "-C" on the shebang ("#!") line is once more permitted if it is also specified on the
           command line. "-C" on the shebang line used to be a silent no-op if it was not also on
           the command line, so perl 5.10.0 disallowed it, which broke some scripts. Now perl
           checks whether it is also on the command line and only dies if it is not [RT #67880].

       •   In 5.10.0, certain types of re-entrant regular expression could crash, or cause the
           following assertion failure [RT #60508]:

               Assertion rx->sublen >= (s - rx->subbeg) + i failed

New or Changed Diagnostics

       "panic: sv_chop %s"
           This new fatal error occurs when the C routine "Perl_sv_chop()" was passed a position
           that is not within the scalar's string buffer. This could be caused by buggy XS code,
           and at this point recovery is not possible.

       "Can't locate package %s for the parents of %s"
           This warning has been removed. In general, it only got produced in conjunction with
           other warnings, and removing it allowed an ISA lookup optimisation to be added.

       "v-string in use/require is non-portable"
           This warning has been removed.

       "Deep recursion on subroutine "%s""
           It is now possible to change the depth threshold for this warning from the default of
           100, by recompiling the perl binary, setting the C pre-processor macro
           "PERL_SUB_DEPTH_WARN" to the desired value.

Changed Internals

       •   The J.R.R. Tolkien quotes at the head of C source file have been checked and proper
           citations added, thanks to a patch from Tom Christiansen.

       •   "vcroak()" now accepts a null first argument. In addition, a full audit was made of
           the "not NULL" compiler annotations, and those for several other internal functions
           were corrected.

       •   New macros "dSAVEDERRNO", "dSAVE_ERRNO", "SAVE_ERRNO", "RESTORE_ERRNO" have been added
           to formalise the temporary saving of the "errno" variable.

       •   The function "Perl_sv_insert_flags" has been added to augment "Perl_sv_insert".

       •   The function "Perl_newSV_type(type)" has been added, equivalent to "Perl_newSV()"
           followed by "Perl_sv_upgrade(type)".

       •   The function "Perl_newSVpvn_flags()" has been added, equivalent to "Perl_newSVpvn()"
           and then performing the action relevant to the flag.

           Two flag bits are currently supported.

           "SVf_UTF8"
               This will call "SvUTF8_on()" for you. (Note that this does not convert an sequence
               of ISO 8859-1 characters to UTF-8). A wrapper, "newSVpvn_utf8()" is available for
               this.

           "SVs_TEMP"
               Call "sv_2mortal()" on the new SV.

           There is also a wrapper that takes constant strings, "newSVpvs_flags()".

       •   The function "Perl_croak_xs_usage" has been added as a wrapper to "Perl_croak".

       •   The functions "PerlIO_find_layer" and "PerlIO_list_alloc" are now exported.

       •   "PL_na" has been exterminated from the core code, replaced by local STRLEN
           temporaries, or "*_nolen()" calls. Either approach is faster than "PL_na", which is a
           pointer deference into the interpreter structure under ithreads, and a global variable
           otherwise.

       •   "Perl_mg_free()" used to leave freed memory accessible via SvMAGIC() on the scalar. It
           now updates the linked list to remove each piece of magic as it is freed.

       •   Under ithreads, the regex in "PL_reg_curpm" is now reference counted. This eliminates
           a lot of hackish workarounds to cope with it not being reference counted.

       •   "Perl_mg_magical()" would sometimes incorrectly turn on "SvRMAGICAL()".  This has been
           fixed.

       •   The public IV and NV flags are now not set if the string value has trailing "garbage".
           This behaviour is consistent with not setting the public IV or NV flags if the value
           is out of range for the type.

       •   SV allocation tracing has been added to the diagnostics enabled by "-Dm".  The tracing
           can alternatively output via the "PERL_MEM_LOG" mechanism, if that was enabled when
           the perl binary was compiled.

       •   Uses of "Nullav", "Nullcv", "Nullhv", "Nullop", "Nullsv" etc have been replaced by
           "NULL" in the core code, and non-dual-life modules, as "NULL" is clearer to those
           unfamiliar with the core code.

       •   A macro MUTABLE_PTR(p) has been added, which on (non-pedantic) gcc will not cast away
           "const", returning a "void *". Macros "MUTABLE_SV(av)", "MUTABLE_SV(cv)" etc build on
           this, casting to "AV *" etc without casting away "const". This allows proper compile-
           time auditing of "const" correctness in the core, and helped picked up some errors
           (now fixed).

       •   Macros "mPUSHs()" and "mXPUSHs()" have been added, for pushing SVs on the stack and
           mortalizing them.

       •   Use of the private structure "mro_meta" has changed slightly. Nothing outside the core
           should be accessing this directly anyway.

       •   A new tool, "Porting/expand-macro.pl" has been added, that allows you to view how a C
           preprocessor macro would be expanded when compiled.  This is handy when trying to
           decode the macro hell that is the perl guts.

New Tests

       Many modules updated from CPAN incorporate new tests.

       Several tests that have the potential to hang forever if they fail now incorporate a
       "watchdog" functionality that will kill them after a timeout, which helps ensure that
       "make test" and "make test_harness" run to completion automatically. (Jerry Hedden).

       Some core-specific tests have been added:

       t/comp/retainedlines.t
           Check that the debugger can retain source lines from "eval".

       t/io/perlio_fail.t
           Check that bad layers fail.

       t/io/perlio_leaks.t
           Check that PerlIO layers are not leaking.

       t/io/perlio_open.t
           Check that certain special forms of open work.

       t/io/perlio.t
           General PerlIO tests.

       t/io/pvbm.t
           Check that there is no unexpected interaction between the internal types "PVBM" and
           "PVGV".

       t/mro/package_aliases.t
           Check that mro works properly in the presence of aliased packages.

       t/op/dbm.t
           Tests for "dbmopen" and "dbmclose".

       t/op/index_thr.t
           Tests for the interaction of "index" and threads.

       t/op/pat_thr.t
           Tests for the interaction of esoteric patterns and threads.

       t/op/qr_gc.t
           Test that "qr" doesn't leak.

       t/op/reg_email_thr.t
           Tests for the interaction of regex recursion and threads.

       t/op/regexp_qr_embed_thr.t
           Tests for the interaction of patterns with embedded "qr//" and threads.

       t/op/regexp_unicode_prop.t
           Tests for Unicode properties in regular expressions.

       t/op/regexp_unicode_prop_thr.t
           Tests for the interaction of Unicode properties and threads.

       t/op/reg_nc_tie.t
           Test the tied methods of "Tie::Hash::NamedCapture".

       t/op/reg_posixcc.t
           Check that POSIX character classes behave consistently.

       t/op/re.t
           Check that exportable "re" functions in universal.c work.

       t/op/setpgrpstack.t
           Check that "setpgrp" works.

       t/op/substr_thr.t
           Tests for the interaction of "substr" and threads.

       t/op/upgrade.t
           Check that upgrading and assigning scalars works.

       t/uni/lex_utf8.t
           Check that Unicode in the lexer works.

       t/uni/tie.t
           Check that Unicode and "tie" work.

Known Problems

       This is a list of some significant unfixed bugs, which are regressions from either 5.10.0
       or 5.8.x.

       •   "List::Util::first" misbehaves in the presence of a lexical $_ (typically introduced
           by "my $_" or implicitly by "given"). The variable which gets set for each iteration
           is the package variable $_, not the lexical $_ [RT #67694].

           A similar issue may occur in other modules that provide functions which take a block
           as their first argument, like

               foo { ... $_ ...} list

       •   The "charnames" pragma may generate a run-time error when a regex is interpolated [RT
           #56444]:

               use charnames ':full';
               my $r1 = qr/\N{THAI CHARACTER SARA I}/;
               "foo" =~ $r1;    # okay
               "foo" =~ /$r1+/; # runtime error

           A workaround is to generate the character outside of the regex:

               my $a = "\N{THAI CHARACTER SARA I}";
               my $r1 = qr/$a/;

       •   Some regexes may run much more slowly when run in a child thread compared with the
           thread the pattern was compiled into [RT #55600].

Deprecations

       The following items are now deprecated.

       •   "Switch" is buggy and should be avoided. From perl 5.11.0 onwards, it is intended that
           any use of the core version of this module will emit a warning, and that the module
           will eventually be removed from the core (probably in perl 5.14.0). See "Switch
           statements" in perlsyn for its replacement.

       •   "suidperl" will be removed in 5.12.0. This provides a mechanism to emulate setuid
           permission bits on systems that don't support it properly.

Acknowledgements

       Some of the work in this release was funded by a TPF grant.

       Nicholas Clark officially retired from maintenance pumpking duty at the end of 2008;
       however in reality he has put much effort in since then to help get 5.10.1 into a fit
       state to be released, including writing a considerable chunk of this perldelta.

       Steffen Mueller and David Golden in particular helped getting CPAN modules polished and
       synchronised with their in-core equivalents.

       Craig Berry was tireless in getting maint to run under VMS, no matter how many times we
       broke it for him.

       The other core committers contributed most of the changes, and applied most of the patches
       sent in by the hundreds of contributors listed in AUTHORS.

       (Sorry to all the people I haven't mentioned by name).

       Finally, thanks to Larry Wall, without whom none of this would be necessary.

Reporting Bugs

       If you find what you think is a bug, you might check the articles recently posted to the
       comp.lang.perl.misc newsgroup and the perl bug database at http://rt.perl.org/perlbug/ .
       There may also be information at http://www.perl.org/ , the Perl Home Page.

       If you believe you have an unreported bug, please run the perlbug program included with
       your release.  Be sure to trim your bug down to a tiny but sufficient test case.  Your bug
       report, along with the output of "perl -V", will be sent off to perlbug@perl.org to be
       analysed by the Perl porting team.

       If the bug you are reporting has security implications, which make it inappropriate to
       send to a publicly archived mailing list, then please send it to
       perl5-security-report@perl.org. This points to a closed subscription unarchived mailing
       list, which includes all the core committers, who will be able to help assess the impact
       of issues, figure out a resolution, and help co-ordinate the release of patches to
       mitigate or fix the problem across all platforms on which Perl is supported. Please only
       use this address for security issues in the Perl core, not for modules independently
       distributed on CPAN.

SEE ALSO

       The Changes file for an explanation of how to view exhaustive details on what changed.

       The INSTALL file for how to build Perl.

       The README file for general stuff.

       The Artistic and Copying files for copyright information.