Provided by: latex2html_2008-debian1-10_all bug


       pstoimg - Convert a PostScript file to a bitmap image using Ghostscript and the Netpbm


       pstoimg -help | -version

       pstoimg [ -antialias ] [ -aaliastext ] [ -center num ] [ -color num ] [ -crop code ]
       [ -debug ] [ -density num] [ -depth num ] [ -discard ] [ -flip code ] [ -geometry XxY ]
       [ -interlaced ] [ -margins X,Y ] [ -multipage ] [ -out file ] [ -quiet ]
       [ -rightjustify num ] [ -scale num ] [ -tmp path ] [ -topjustify [x]num ] [ -transparent ]
       [ -type type ] [ -shoreup num[d] ] [ -white ] file [ file2 ... ]


       The command line options may be abbreviated to the shortest unique prefix.

           Show this help page and exit.

           Show the release and version of pstoimg and exit.

           Use Ghostscript's anti-aliasing feature for rendering "softer" images.  This applies
           to lines and edges of polygonal and oval or circular shapes.  Only valid if
           Ghostscript 4.03 or higher is installed.

           Use Ghostscript's anti-aliasing feature for "smoother" font characters, without the
           jagged edges. Similar to -antialias for graphic components.  Only valid if Ghostscript
           4.03 or higher is installed.

       -center num
           Add the appropriate amount of whitespace to the left of the image so that the image
           appears to be centered in a total width of num pixels.

       -crop code
           Crop the bitmap from the given directions. code may be a string of several cropping
           instructions, which are executed strictly in the given order. Possible values are: h
           (horizontal, i.e. crop top and bottom), v (vertical), tblr (top, bottom, left, right)
           and a (all directions). A special case is s: "shave" the image at the bottom, but only
           if a single line of whitespace exists.

           Turn on debugging output. This can get rather verbose. Any intermediate files
           generated are not removed to help debugging.

       -density num
           The density (resolution) in DPI in which to render the bitmap. The default is 72.

       -depth num or -color num
           Specify the color depth of the bitmap. Legal values are 1 (black & white), 8 (256
           colors) and 24 (true color).

           Delete the input postscript file if the conversion was successful. Setting the
           environment DISCARD to a true value (as perl sees it) has the same effect.

       -flip code
           Flip all generated output bitmaps. The following codes are recognized: lr (flip left-
           right), tb (flip top-bottom), xy (flip bottom/left-top/right), r90 and ccw (rotate by
           90 degrees counterclockwise), r270 and cw (rotate 90 degrees clockwise) and r180
           (rotate 180 degrees).

       -geometry XxY
           Render only this "window" of the PostScript file. If given, this option can
           dramatically reduce memory requirements and speed up conversion. The geometry is
           automatically detected in case of EPS files (Encapsulated PostScript).

           Generate an interlaced bitmap. Interlaced images build up from coarse to fine as they
           are loaded. This option may not work on every installation and/or bitmap type,
           depending of the capabilities of external programs.

       -margins X,Y
           The offset of the rectangle in the postscript file that is going to be rendered from
           top/left. Can be used together with -geometry to further reduce the size of the
           intermediate bitmap file generated by Ghostscript.

           Process a multi-page PostScript file, i.e. create an individual bitmap for every page.
           The resulting files are numbered: The decimal number (starting with 1) is appended to
           the basename of the PostScript input file (or the basename of the filename specified
           with -out), while keeping the extension.

       -out file
           The file where to write the bitmap. If multiple PostScript files are supplied on the
           command line, this option is ignored. The bitmap type extension is appended
           automatically if file does not contain a dot.  In connection with -multipage file is
           extended by the page number as shown in this example:

           -outfile foo.gif  --------> foo1.gif, foo2.gif, ...

           Do not print anything except error messages.

       -rightjustify num
           Add the appropriate amount of whitespace to the left of the image so that it appears
           to be aligned to the right in a total width of num pixels.

       -scale factor
           Scale the image by factor. Valid choices are any numbers greater than zero. Useful
           choices are numbers between 0.1 - 5.  Large numbers may generate very large
           intermediate files and will take longer to process. If this option is omitted, the
           environment SCALE is considered.

       -shoreup num[d]
           Make height and width of the bitmap(s) an exact multiple of num. If num is followed by
           a "d", then half the extra vertical space is placed underneath. This option is useful,
           if you want to have "blown-up" images of high quality for print, but downscale them in
           HTML using "<IMG WIDTH=x HEIGHT=y>". If the actual image is is not an integer multiple
           of x,y then browsers tend to display distorted images.

       -tmp path
           Use path to store temporary files. Defaults to /tmp on this installation. This
           parameter can be set by the environment TMP or TEMP, too.

       -topjustify [x]num
           Add padding whitespace to the image so that it gets a defined height.  If an integer
           value is given, it defines the total height. The whitespace is added at the bottom. If
           the number is preceded by "x", then this multiple of the image height is added as
           whitespace at the bottom.

           Generate transparent bitmaps, i.e. the background color (white) is transparent if
           viewed with certain viewers (e.g. browsers). This option may not be available due to
           missing capabilities of external programs.

       -type type
           Instruct pstoimg to render the bitmap in type format. Depending on the local
           installation, pstoimg is capable of generating either GIF or PNG bitmaps. This site
           features the following types: png gif

           If omitted, the first type in this list is taken.

           Remove TeX's page color information from the PostScript file before converting so that
           a white background is used.


       pstoimg iterates over the given input files and runs them through Ghostscript. The
       resulting pnm (portable anymap files) are processed with different Netpbm tools (cropping,
       color mapping, aligning, ...)  and finally converted into (currently) either GIF or PNG
       format. The bitmaps can now be included e.g. in WWW pages.

       The PostScript file is converted as is. If a valid bounding box is found (EPS format),
       then only this area is converted. The image is not cropped by default.


       0   if everything went all right

       x   (x != 0) something went wrong. See the message output.


           Convert the first page of to the default bitmap type.

       "pstoimg -type png -crop a -trans -interlace"
           Same as above, but force png output and crop all the whitespace around the image and
           make the color white transparent and generate an interlaced bitmap.

       "pstoimg -multi -out bar -type gif -crop a"
           Consider a multiple page PostScript file and create output files bar1.gif,
           bar2.gif, etc.


           See -density, -depth, -debug, -discard, respectively.

           This variable is set to the path(s) where Ghostscript libraries have been found on
           this system during configuration, but only if the built-in paths are not correct. This
           fixes the problem of relocation that is quite common on Win32 installations. This
           behavior can be overridden by setting GS_LIB manually before starting pstoimg.

           The directory where the LaTeX2HTML library and perl modules are found.  Defaults to
           "/usr/share/latex2html" on this installation.

           Setting this has the same effect as specifying -out. Please do not rely on this
           feature any more, it will disappear from the next releases!

           The papersize to use by Ghostscript to render the image. pstoimg tries hard to
           optimize for rendering on the smallest possible bitmap size.  Still this option is
           there to enable tuning by hand, although it is deprecated. If pstoimg finds a better
           setting, this parameter is ignored.

           See the discussion of -scale.

       TMP and TEMP
           Unless overridden by -tmp, these variables denote a directory where to store temporary
           files. TMP is considered first, then TEMP.


       gs, pnmcrop, pnmquant, pbmmake, pnmcat, pnmfile, pnmflip, ppmtogif, pnmtopng, giftool,


       Several people have suggested to use ImageMagick's convert instead of pstoimg. A few
       comments on this: convert uses (of course) Ghostscript for conversion of PostScript to
       bitmap, so one still needs gs. And for the special requirements of LaTeX2HTML convert's
       features are not sufficient. The ImageMagick toolset has everything in place, but it has
       some overhead that can prove killing when processing some 100 images. pstoimg only does
       what it really has to, so it should be quite efficient. Don't get me wrong - I like
       ImageMagick, but not in the context of LaTeX2HTML.


       This utility is automatically configured and built to work on the local setup. If this
       setup changes (e.g. some of the external commands are moved), the script has be be

       Despite the portability of perl, a pstoimg configured on UNIX will probably not work on
       Win32 and vice versa.


       This is a major enhancement release, so there may be a few bugs. As the user inteface
       changed a bit, some of your tools that were using pstoimg may not work any more.

       Please report bugs to, stating the (debug) output of pstoimg, your perl
       version and the versions of the external tools.  Best is to include the file
       from the configuration procedure.


       Marek Rouchal <>


       This script went through a long evolution, beginning with a modification of Doug Crabill's
       <> ps2epsi script.  The first perl version was done by Nikos Drakos
       <>.  It was gradually improved by numerous LaTeX2HTML developers:
       Ross Moore <>, Jens Lippmann <>
       and others (sorry for not mentioning everyone and thanks for your contributions).