Provided by: avr-libc_1.8.0-4.1_all bug

NAME

       <avr/lock.h>: Lockbit Support -

       Introduction

       The Lockbit API allows a user to specify the lockbit settings for the specific AVR device
       they are compiling for. These lockbit settings will be placed in a special section in the
       ELF output file, after linking.

       Programming tools can take advantage of the lockbit information embedded in the ELF file,
       by extracting this information and determining if the lockbits need to be programmed after
       programming the Flash and EEPROM memories. This also allows a single ELF file to contain
       all the information needed to program an AVR.

       To use the Lockbit API, include the <avr/io.h> header file, which in turn automatically
       includes the individual I/O header file and the <avr/lock.h> file. These other two files
       provides everything necessary to set the AVR lockbits.

       Lockbit API

       Each I/O header file may define up to 3 macros that controls what kinds of lockbits are
       available to the user.

       If __LOCK_BITS_EXIST is defined, then two lock bits are available to the user and 3 mode
       settings are defined for these two bits.

       If __BOOT_LOCK_BITS_0_EXIST is defined, then the two BLB0 lock bits are available to the
       user and 4 mode settings are defined for these two bits.

       If __BOOT_LOCK_BITS_1_EXIST is defined, then the two BLB1 lock bits are available to the
       user and 4 mode settings are defined for these two bits.

       If __BOOT_LOCK_APPLICATION_TABLE_BITS_EXIST is defined then two lock bits are available to
       set the locking mode for the Application Table Section (which is used in the XMEGA
       family).

       If __BOOT_LOCK_APPLICATION_BITS_EXIST is defined then two lock bits are available to set
       the locking mode for the Application Section (which is used in the XMEGA family).

       If __BOOT_LOCK_BOOT_BITS_EXIST is defined then two lock bits are available to set the
       locking mode for the Boot Loader Section (which is used in the XMEGA family).

       The AVR lockbit modes have inverted values, logical 1 for an unprogrammed (disabled) bit
       and logical 0 for a programmed (enabled) bit. The defined macros for each individual lock
       bit represent this in their definition by a bit-wise inversion of a mask. For example, the
       LB_MODE_3 macro is defined as:

           #define LB_MODE_3  (0xFC)
       `

       To combine the lockbit mode macros together to represent a whole byte,
       use the bitwise AND operator, like so:

       (LB_MODE_3 & BLB0_MODE_2)

       <avr/lock.h> also defines a macro that provides a default lockbit value: LOCKBITS_DEFAULT
       which is defined to be 0xFF.

       See the AVR device specific datasheet for more details about these lock bits and the
       available mode settings.

       A convenience macro, LOCKMEM, is defined as a GCC attribute for a custom-named section of
       '.lock'.

       A convenience macro, LOCKBITS, is defined that declares a variable, __lock, of type
       unsigned char with the attribute defined by LOCKMEM. This variable allows the end user to
       easily set the lockbit data.

       Note:
           If a device-specific I/O header file has previously defined LOCKMEM, then LOCKMEM is
           not redefined. If a device-specific I/O header file has previously defined LOCKBITS,
           then LOCKBITS is not redefined. LOCKBITS is currently known to be defined in the I/O
           header files for the XMEGA devices.

       API Usage Example

       Putting all of this together is easy:

       #include <avr/io.h>

       LOCKBITS = (LB_MODE_1 & BLB0_MODE_3 & BLB1_MODE_4);

       int main(void)
       {
           return 0;
       }

       Or:

       #include <avr/io.h>

       unsigned char __lock __attribute__((section (".lock"))) =
           (LB_MODE_1 & BLB0_MODE_3 & BLB1_MODE_4);

       int main(void)
       {
           return 0;
       }

       However there are a number of caveats that you need to be aware of to
       use this API properly.

       Be sure to include <avr/io.h> to get all of the definitions for the API.
       The LOCKBITS macro defines a global variable to store the lockbit data. This
       variable is assigned to its own linker section. Assign the desired lockbit
       values immediately in the variable initialization.

       The .lock section in the ELF file will get its values from the initial
       variable assignment ONLY. This means that you can NOT assign values to
       this variable in functions and the new values will not be put into the
       ELF .lock section.

       The global variable is declared in the LOCKBITS macro has two leading
       underscores, which means that it is reserved for the "implementation",
       meaning the library, so it will not conflict with a user-named variable.

       You must initialize the lockbit variable to some meaningful value, even
       if it is the default value. This is because the lockbits default to a
       logical 1, meaning unprogrammed. Normal uninitialized data defaults to all
       locgial zeros. So it is vital that all lockbits are initialized, even with
       default data. If they are not, then the lockbits may not programmed to the
       desired settings and can possibly put your device into an unrecoverable
       state.

       Be sure to have the -mmcu=<em>device</em> flag in your compile command line and
       your linker command line to have the correct device selected and to have
       the correct I/O header file included when you include <avr/io.h>.

       You can print out the contents of the .lock section in the ELF file by
       using this command line:

       avr-objdump -s -j .lock <ELF file>

Author

       Generated automatically by Doxygen for avr-libc from the source code.