Provided by: avr-libc_1.8.0-4.1_all bug

NAME

       porting - Porting From IAR to AVR GCC

Introduction

       C language was designed to be a portable language. There two main types of porting
       activities: porting an application to a different platform (OS and/or processor), and
       porting to a different compiler. Porting to a different compiler can be exacerbated when
       the application is an embedded system. For example, the C language Standard, strangely,
       does not specify a standard for declaring and defining Interrupt Service Routines (ISRs).
       Different compilers have different ways of defining registers, some of which use non-
       standard language constructs.

       This chapter describes some methods and pointers on porting an AVR application built with
       the IAR compiler to the GNU toolchain (AVR GCC). Note that this may not be an exhaustive
       list.

Registers

       IO header files contain identifiers for all the register names and bit names for a
       particular processor. IAR has individual header files for each processor and they must be
       included when registers are being used in the code. For example:

       #include <iom169.h>

       Note:
           IAR does not always use the same register names or bit names that are used in the AVR
           datasheet.

       AVR GCC also has individual IO header files for each processor. However, the actual
       processor type is specified as a command line flag to the compiler. (Using the
       -mmcu=processor flag.) This is usually done in the Makefile. This allows you to specify
       only a single header file for any processor type:

       #include <avr/io.h>

       Note:
           The forward slash in the <avr/io.h> file name that is used to separate subdirectories
           can be used on Windows distributions of the toolchain and is the recommended method of
           including this file.

       The compiler knows the processor type and through the single header file above, it can
       pull in and include the correct individual IO header file. This has the advantage that you
       only have to specify one generic header file, and you can easily port your application to
       another processor type without having to change every file to include the new IO header
       file.

       The AVR toolchain tries to adhere to the exact names of the registers and names of the
       bits found in the AVR datasheet. There may be some descrepencies between the register
       names found in the IAR IO header files and the AVR GCC IO header files.

Interrupt Service Routines (ISRs)

       As mentioned above, the C language Standard, strangely, does not specify a standard way of
       declaring and defining an ISR. Hence, every compiler seems to have their own special way
       of doing so.

       IAR declares an ISR like so:

       #pragma vector=TIMER0_OVF_vect
       __interrupt void MotorPWMBottom()
       {
           // code
       }

       In AVR GCC, you declare an ISR like so:

       ISR(PCINT1_vect)
       {
           //code
       }

       AVR GCC uses the ISR macro to define an ISR. This macro requries the header file:

       #include <avr/interrupt.h>

       The names of the various interrupt vectors are found in the individual processor IO header
       files that you must include with <avr/io.h>.

       Note:
           The names of the interrupt vectors in AVR GCC has been changed to match the names of
           the vectors in IAR. This significantly helps in porting applications from IAR to AVR
           GCC.

Intrinsic Routines

       IAR has a number of intrinsic routine such as

       __enable_interrupts() __disable_interrupts() __watchdog_reset()

       These intrinsic functions compile to specific AVR opcodes (SEI, CLI, WDR).

       There are equivalent macros that are used in AVR GCC, however they are not located in a
       single include file.

       AVR GCC has sei() for __enable_interrupts(), and cli() for __disable_interrupts(). Both of
       these macros are located in <avr/interrupts.h>.

       AVR GCC has the macro wdt_reset() in place of __watchdog_reset(). However, there is a
       whole Watchdog Timer API available in AVR GCC that can be found in <avr/wdt.h>.

Flash Variables

       The C language was not designed for Harvard architecture processors with separate memory
       spaces. This means that there are various non-standard ways to define a variable whose
       data resides in the Program Memory (Flash).

       IAR uses a non-standard keyword to declare a variable in Program Memory:

       __flash int mydata[] = ....

       AVR GCC uses Variable Attributes to achieve the same effect:

       int mydata[] __attribute__((progmem))

       Note:
           See the GCC User Manual for more information about Variable Attributes.

       avr-libc provides a convenience macro for the Variable Attribute:

       #include <avr/pgmspace.h>
       .
       .
       .
       int mydata[] PROGMEM = ....

       Note:
           The PROGMEM macro expands to the Variable Attribute of progmem. This macro requires
           that you include <avr/pgmspace.h>. This is the canonical method for defining a
           variable in Program Space.

       To read back flash data, use the pgm_read_*() macros defined in <avr/pgmspace.h>. All
       Program Memory handling macros are defined there.

       There is also a way to create a method to define variables in Program Memory that is
       common between the two compilers (IAR and AVR GCC). Create a header file that has these
       definitions:

       #if defined(__ICCAVR__) // IAR C Compiler
       #define FLASH_DECLARE(x) __flash x
       #endif
       #if defined(__GNUC__) // GNU Compiler
       #define FLASH_DECLARE(x) x __attribute__((__progmem__))
       #endif

       This code snippet checks for the IAR compiler or for the GCC compiler and defines a macro
       FLASH_DECLARE(x) that will declare a variable in Program Memory using the appropriate
       method based on the compiler that is being used. Then you would used it like so:

       FLASH_DECLARE(int mydata[] = ...);

Non-Returning main()

       To declare main() to be a non-returning function in IAR, it is done like this:

       __C_task void main(void)
       {
           // code
       }

       To do the equivalent in AVR GCC, do this:

       void main(void) __attribute__((noreturn));

       void main(void)
       {
           //...
       }

       Note:
           See the GCC User Manual for more information on Function Attributes.

       In AVR GCC, a prototype for main() is required so you can declare the function attribute
       to specify that the main() function is of type 'noreturn'. Then, define main() as normal.
       Note that the return type for main() is now void.

Locking Registers

       The IAR compiler allows a user to lock general registers from r15 and down by using
       compiler options and this keyword syntax:

       __regvar __no_init volatile unsigned int filteredTimeSinceCommutation @14;

       This line locks r14 for use only when explicitly referenced in your code thorugh the var
       name 'filteredTimeSinceCommutation'. This means that the compiler cannot dispose of it at
       its own will.

       To do this in AVR GCC, do this:

       register unsigned char counter asm("r3");

       Typically, it should be possible to use r2 through r15 that way.

       Note:
           Do not reserve r0 or r1 as these are used internally by the compiler for a temporary
           register and for a zero value.

           Locking registers is not recommended in AVR GCC as it removes this register from the
           control of the compiler, which may make code generation worse. Use at your own risk.