Provided by: nut-server_2.7.1-1ubuntu1.2_amd64 bug

NAME

       bcmxcp_usb - Experimental driver for UPSes supporting the BCM/XCP protocol over USB

NOTE

       This man page only documents the hardware-specific features of the bcmxcp_usb driver. For
       information about the core driver, see nutupsdrv(8). This driver is a variant of the
       serial driver bcmxcp and uses the same core code.

SUPPORTED HARDWARE

       This driver should recognize all BCM/XCP-compatible UPSes that are connected via USB. It
       has been developed and tested on Powerware PW3501 hardware. It also has been tested on
       PW5110 hardware.

EXTRA ARGUMENTS

       This driver supports the following optional settings in the ups.conf(5).

       shutdown_delay=delay
           The number of seconds that the UPS should wait between receiving the shutdown command
           and actually shutting off.

DEFAULT VALUES FOR THE EXTRA ARGUMENTS

       shutdown_delay =120

INSTANT COMMANDS

       This driver supports the following Instant Commands:

       shutdown.return
           Turn off the load and return when power is back.

       shutdown.stayoff
           Turn off the load and remain off.

       test.battery.start
           Start a battery test.

TODO LIST

       Report UPS alarm status
           BCM/XCP supports reporting a wide range of UPS alarm conditions.

       Report UPS statistics informations
           BCM/XCP supports reporting of UPS statistics data.

EXPERIMENTAL DRIVER

       This driver has been tagged experimental, even if it has been reported to be stable. Thus
       it is not suitable for production systems and it is not built by default. This is mainly
       due to the fact that it is a new driver.

INSTALLATION

       This driver is not built by default. You can build it by using "configure --with-usb=yes".
       Note that it will also install other USB drivers.

       You also need to install manually the hotplug files (libhidups and libhid.usermap),
       generally in etc/hotplug/usb/, to address the permission settings problem. Lastly note
       that the libhidups file must have execution flag set (ie using chmod +x ...).

IMPLEMENTATION

       bcmxcp_usb only supports 1 UPS at this time. You can put the "auto" value for port in
       ups.conf, i.e.:

           [pw3105]
                   driver = bcmxcp_usb
                   port = auto

KNOWN ISSUES AND BUGS

    Got EPERM: Operation not permitted upon driver startup""
       You have forgotten to install the hotplug files, as explained in the INSTALLATION section
       above. Don’t forget to restart hotplug so that it applies these changes.

AUTHOR

       Tore Ørpetveit <tore@orpetveit.net>, Wolfgang Ocker <weo@weo1.de>

SEE ALSO

   The core driver:
       nutupsdrv(8)

   Internet resources:
       The NUT (Network UPS Tools) home page: http://www.networkupstools.org/