Provided by: iodine_0.6.0~rc1-18_amd64 bug

NAME

       iodine-client-start - start an iodine IPv4-over-DNS tunnel

SYNOPSIS

       iodine-client-start [option]

DESCRIPTION

       'iodine-client-start' starts an iodine IP-over-DNS tunnel.

       -h, --help
              Print help and exit

       -v, --version
              Print version info and exit

       Invoking  the  program  without  options  attempts  to  set  up  and  configure  an iodine
       IP-over-DNS tunnel using the configuration in the file  /etc/default/iodine-client  or  by
       querying  the user. It tries to figure out the right way to set things up by observing the
       network, and if all else fails by guessing.

       QUICK CONFIGURATION

       Put two lines in the file /etc/default/iodine-client

              subdomain=your.tunnel.sub.domain

              passwd=password_for_that_tunnel

       or invoke the script with those environment variables set:

              env subdomain=xxx passwd=xxx iodine-client-start

       If these are not set, the script will query the user for them.

       DETAILS

       The configuration file consists of lines which are either comments starting with  '#',  or
       settings of the form VAR="val". Valid VARs are:

       subdomain

              Sample value: your.tunnel.sub.domain (no default, must be set)

       passwd

              Sample value: password_for_that_tunnel (no default, must be set)

       testhost

              Hostname to ping when testing if network is working (default: slashdot.org)

       bounce_localnet

              Take  the  local  network  down  and then up again before starting tunnel (default:
              false)

       test_ping_localnet

              Test if the local network is working by pinging the gateway (default: true)

       test_ping_tunnel

              Test if the iodine tunnel is working after it has been set up by pinging  the  host
              at the other end (default: true)

       test_ping_final

              Test  if  the  tunnel is working after everything is ostensibly set up by trying to
              ping an external host (default: true)

       default_router

              IP address of router on the local network---should be found automatically, set this
              if that fails and the program guesses wrong.

       interface

              Interface  to use (e.g., eth1, eth0, etc) for connection to DNS server used for the
              iodine tunnel---should be found automatically, set  this  if  that  fails  and  the
              program guesses wrong.

       mtu

              Set  if  tunnel MTU needs to be manually changed (lowered). Should not be necessary
              anymore, as recent versions of iodine negotiate an appropriate  MTU  during  tunnel
              setup.  But  if  that  negotiation  does  not  happen, or if you are using an older
              version of iodine, the default tunnel MTU is 1024, and  if  the  local  DNS  server
              restricts to 512 byte packets you might need to use an MTU of 220.

       skip_raw_udp_mode

              Set  "-r"  option  in iodine command line. With this option, iodine does not try to
              establish a direct UDP socket to the iodine server on port 53. (default: true).

       continue_on_error

              Set if the script should continue even if a command fails.  Use to test script when
              running as non-root. Defaults to false if running as root, true otherwise.