Provided by: freebsd-manpages_9.2+1-1_all bug

NAME

     mbuf — memory management in the kernel IPC subsystem

SYNOPSIS

     #include <sys/param.h>
     #include <sys/systm.h>
     #include <sys/mbuf.h>

   Mbuf allocation macros
     MGET(struct mbuf *mbuf, int how, short type);

     MGETHDR(struct mbuf *mbuf, int how, short type);

     MCLGET(struct mbuf *mbuf, int how);

     MEXTADD(struct mbuf *mbuf, caddr_t buf, u_int size,
         void (*free)(void *opt_arg1, void *opt_arg2), void *opt_arg1, void *opt_arg2,
         short flags, int type);

     MEXTFREE(struct mbuf *mbuf);

     MFREE(struct mbuf *mbuf, struct mbuf *successor);

   Mbuf utility macros
     mtod(struct mbuf *mbuf, type);

     M_ALIGN(struct mbuf *mbuf, u_int len);

     MH_ALIGN(struct mbuf *mbuf, u_int len);

     int
     M_LEADINGSPACE(struct mbuf *mbuf);

     int
     M_TRAILINGSPACE(struct mbuf *mbuf);

     M_MOVE_PKTHDR(struct mbuf *to, struct mbuf *from);

     M_PREPEND(struct mbuf *mbuf, int len, int how);

     MCHTYPE(struct mbuf *mbuf, u_int type);

     int
     M_WRITABLE(struct mbuf *mbuf);

   Mbuf allocation functions
     struct mbuf *
     m_get(int how, int type);

     struct mbuf *
     m_getm(struct mbuf *orig, int len, int how, int type);

     struct mbuf *
     m_getcl(int how, short type, int flags);

     struct mbuf *
     m_getclr(int how, int type);

     struct mbuf *
     m_gethdr(int how, int type);

     struct mbuf *
     m_free(struct mbuf *mbuf);

     void
     m_freem(struct mbuf *mbuf);

   Mbuf utility functions
     void
     m_adj(struct mbuf *mbuf, int len);

     void
     m_align(struct mbuf *mbuf, int len);

     int
     m_append(struct mbuf *mbuf, int len, c_caddr_t cp);

     struct mbuf *
     m_prepend(struct mbuf *mbuf, int len, int how);

     struct mbuf *
     m_copyup(struct mbuf *mbuf, int len, int dstoff);

     struct mbuf *
     m_pullup(struct mbuf *mbuf, int len);

     struct mbuf *
     m_pulldown(struct mbuf *mbuf, int offset, int len, int *offsetp);

     struct mbuf *
     m_copym(struct mbuf *mbuf, int offset, int len, int how);

     struct mbuf *
     m_copypacket(struct mbuf *mbuf, int how);

     struct mbuf *
     m_dup(struct mbuf *mbuf, int how);

     void
     m_copydata(const struct mbuf *mbuf, int offset, int len, caddr_t buf);

     void
     m_copyback(struct mbuf *mbuf, int offset, int len, caddr_t buf);

     struct mbuf *
     m_devget(char *buf, int len, int offset, struct ifnet *ifp,
         void (*copy)(char *from, caddr_t to, u_int len));

     void
     m_cat(struct mbuf *m, struct mbuf *n);

     u_int
     m_fixhdr(struct mbuf *mbuf);

     void
     m_dup_pkthdr(struct mbuf *to, struct mbuf *from);

     void
     m_move_pkthdr(struct mbuf *to, struct mbuf *from);

     u_int
     m_length(struct mbuf *mbuf, struct mbuf **last);

     struct mbuf *
     m_split(struct mbuf *mbuf, int len, int how);

     int
     m_apply(struct mbuf *mbuf, int off, int len, int (*f)(void *arg, void *data, u_int len),
         void *arg);

     struct mbuf *
     m_getptr(struct mbuf *mbuf, int loc, int *off);

     struct mbuf *
     m_defrag(struct mbuf *m0, int how);

     struct mbuf *
     m_unshare(struct mbuf *m0, int how);

DESCRIPTION

     An mbuf is a basic unit of memory management in the kernel IPC subsystem.  Network packets
     and socket buffers are stored in mbufs.  A network packet may span multiple mbufs arranged
     into a mbuf chain (linked list), which allows adding or trimming network headers with little
     overhead.

     While a developer should not bother with mbuf internals without serious reason in order to
     avoid incompatibilities with future changes, it is useful to understand the general
     structure of an mbuf.

     An mbuf consists of a variable-sized header and a small internal buffer for data.  The total
     size of an mbuf, MSIZE, is a constant defined in <sys/param.h>.  The mbuf header includes:

           m_next     (struct mbuf *) A pointer to the next mbuf in the mbuf chain.

           m_nextpkt  (struct mbuf *) A pointer to the next mbuf chain in the queue.

           m_data     (caddr_t) A pointer to data attached to this mbuf.

           m_len      (int) The length of the data.

           m_type     (short) The type of the data.

           m_flags    (int) The mbuf flags.

     The mbuf flag bits are defined as follows:

     /* mbuf flags */
     #define M_EXT           0x0001  /* has associated external storage */
     #define M_PKTHDR        0x0002  /* start of record */
     #define M_EOR           0x0004  /* end of record */
     #define M_RDONLY        0x0008  /* associated data marked read-only */
     #define M_PROTO1        0x0010  /* protocol-specific */
     #define M_PROTO2        0x0020  /* protocol-specific */
     #define M_PROTO3        0x0040  /* protocol-specific */
     #define M_PROTO4        0x0080  /* protocol-specific */
     #define M_PROTO5        0x0100  /* protocol-specific */
     #define M_PROTO6        0x4000  /* protocol-specific (avoid M_BCAST conflict) */
     #define M_FREELIST      0x8000  /* mbuf is on the free list */

     /* mbuf pkthdr flags (also stored in m_flags) */
     #define M_BCAST         0x0200  /* send/received as link-level broadcast */
     #define M_MCAST         0x0400  /* send/received as link-level multicast */
     #define M_FRAG          0x0800  /* packet is fragment of larger packet */
     #define M_FIRSTFRAG     0x1000  /* packet is first fragment */
     #define M_LASTFRAG      0x2000  /* packet is last fragment */

     The available mbuf types are defined as follows:

     /* mbuf types */
     #define MT_DATA         1       /* dynamic (data) allocation */
     #define MT_HEADER       MT_DATA /* packet header */
     #define MT_SONAME       8       /* socket name */
     #define MT_CONTROL      14      /* extra-data protocol message */
     #define MT_OOBDATA      15      /* expedited data */

     The available external buffer types are defined as follows:

     /* external buffer types */
     #define EXT_CLUSTER     1       /* mbuf cluster */
     #define EXT_SFBUF       2       /* sendfile(2)'s sf_bufs */
     #define EXT_JUMBOP      3       /* jumbo cluster 4096 bytes */
     #define EXT_JUMBO9      4       /* jumbo cluster 9216 bytes */
     #define EXT_JUMBO16     5       /* jumbo cluster 16184 bytes */
     #define EXT_PACKET      6       /* mbuf+cluster from packet zone */
     #define EXT_MBUF        7       /* external mbuf reference (M_IOVEC) */
     #define EXT_NET_DRV     100     /* custom ext_buf provided by net driver(s) */
     #define EXT_MOD_TYPE    200     /* custom module's ext_buf type */
     #define EXT_DISPOSABLE  300     /* can throw this buffer away w/page flipping */
     #define EXT_EXTREF      400     /* has externally maintained ref_cnt ptr */

     If the M_PKTHDR flag is set, a struct pkthdr m_pkthdr is added to the mbuf header.  It
     contains a pointer to the interface the packet has been received from (struct ifnet *rcvif),
     and the total packet length (int len).  Optionally, it may also contain an attached list of
     packet tags (struct m_tag).  See mbuf_tags(9) for details.  Fields used in offloading
     checksum calculation to the hardware are kept in m_pkthdr as well.  See HARDWARE-ASSISTED
     CHECKSUM CALCULATION for details.

     If small enough, data is stored in the internal data buffer of an mbuf.  If the data is
     sufficiently large, another mbuf may be added to the mbuf chain, or external storage may be
     associated with the mbuf.  MHLEN bytes of data can fit into an mbuf with the M_PKTHDR flag
     set, MLEN bytes can otherwise.

     If external storage is being associated with an mbuf, the m_ext header is added at the cost
     of losing the internal data buffer.  It includes a pointer to external storage, the size of
     the storage, a pointer to a function used for freeing the storage, a pointer to an optional
     argument that can be passed to the function, and a pointer to a reference counter.  An mbuf
     using external storage has the M_EXT flag set.

     The system supplies a macro for allocating the desired external storage buffer, MEXTADD.

     The allocation and management of the reference counter is handled by the subsystem.

     The system also supplies a default type of external storage buffer called an mbuf cluster.
     Mbuf clusters can be allocated and configured with the use of the MCLGET macro.  Each mbuf
     cluster is MCLBYTES in size, where MCLBYTES is a machine-dependent constant.  The system
     defines an advisory macro MINCLSIZE, which is the smallest amount of data to put into an
     mbuf cluster.  It is equal to the sum of MLEN and MHLEN.  It is typically preferable to
     store data into the data region of an mbuf, if size permits, as opposed to allocating a
     separate mbuf cluster to hold the same data.

   Macros and Functions
     There are numerous predefined macros and functions that provide the developer with common
     utilities.

           mtod(mbuf, type)
           Convert an mbuf pointer to a data pointer.  The macro expands to the data pointer cast
           to the pointer of the specified type.  Note: It is advisable to ensure that there is
           enough contiguous data in mbuf.  See m_pullup() for details.

           MGET(mbuf, how, type)
           Allocate an mbuf and initialize it to contain internal data.  mbuf will point to the
           allocated mbuf on success, or be set to NULL on failure.  The how argument is to be
           set to M_WAITOK or M_NOWAIT.  It specifies whether the caller is willing to block if
           necessary.  A number of other functions and macros related to mbufs have the same
           argument because they may at some point need to allocate new mbufs.

           Historical mbuf allocator (See HISTORY section) used allocation flags M_WAIT and
           M_DONTWAIT.  These constants are kept for compatibility and their use in new code is
           discouraged.

           MGETHDR(mbuf, how, type)
           Allocate an mbuf and initialize it to contain a packet header and internal data.  See
           MGET() for details.

           MEXTADD(mbuf, buf, size, free, opt_arg1, opt_arg2, flags, type)
           Associate externally managed data with mbuf.  Any internal data contained in the mbuf
           will be discarded, and the M_EXT flag will be set.  The buf and size arguments are the
           address and length, respectively, of the data.  The free argument points to a function
           which will be called to free the data when the mbuf is freed; it is only used if type
           is EXT_EXTREF.  The opt_arg1 and opt_arg2 arguments will be passed unmodified to free.
           The flags argument specifies additional mbuf flags; it is not necessary to specify
           M_EXT.  Finally, the type argument specifies the type of external data, which controls
           how it will be disposed of when the mbuf is freed.  In most cases, the correct value
           is EXT_EXTREF.

           MCLGET(mbuf, how)
           Allocate and attach an mbuf cluster to mbuf.  If the macro fails, the M_EXT flag will
           not be set in mbuf.

           M_ALIGN(mbuf, len)
           Set the pointer mbuf->m_data to place an object of the size len at the end of the
           internal data area of mbuf, long word aligned.  Applicable only if mbuf is newly
           allocated with MGET() or m_get().

           MH_ALIGN(mbuf, len)
           Serves the same purpose as M_ALIGN() does, but only for mbuf newly allocated with
           MGETHDR() or m_gethdr(), or initialized by m_dup_pkthdr() or m_move_pkthdr().

           m_align(mbuf, len)
           Services the same purpose as M_ALIGN() but handles any type of mbuf.

           M_LEADINGSPACE(mbuf)
           Returns the number of bytes available before the beginning of data in mbuf.

           M_TRAILINGSPACE(mbuf)
           Returns the number of bytes available after the end of data in mbuf.

           M_PREPEND(mbuf, len, how)
           This macro operates on an mbuf chain.  It is an optimized wrapper for m_prepend() that
           can make use of possible empty space before data (e.g. left after trimming of a link-
           layer header).  The new mbuf chain pointer or NULL is in mbuf after the call.

           M_MOVE_PKTHDR(to, from)
           Using this macro is equivalent to calling m_move_pkthdr(to, from).

           M_WRITABLE(mbuf)
           This macro will evaluate true if mbuf is not marked M_RDONLY and if either mbuf does
           not contain external storage or, if it does, then if the reference count of the
           storage is not greater than 1.  The M_RDONLY flag can be set in mbuf->m_flags.  This
           can be achieved during setup of the external storage, by passing the M_RDONLY bit as a
           flags argument to the MEXTADD() macro, or can be directly set in individual mbufs.

           MCHTYPE(mbuf, type)
           Change the type of mbuf to type.  This is a relatively expensive operation and should
           be avoided.

     The functions are:

           m_get(how, type)
           A function version of MGET() for non-critical paths.

           m_getm(orig, len, how, type)
           Allocate len bytes worth of mbufs and mbuf clusters if necessary and append the
           resulting allocated mbuf chain to the mbuf chain orig, if it is non-NULL.  If the
           allocation fails at any point, free whatever was allocated and return NULL.  If orig
           is non-NULL, it will not be freed.  It is possible to use m_getm() to either append
           len bytes to an existing mbuf or mbuf chain (for example, one which may be sitting in
           a pre-allocated ring) or to simply perform an all-or-nothing mbuf and mbuf cluster
           allocation.

           m_gethdr(how, type)
           A function version of MGETHDR() for non-critical paths.

           m_getcl(how, type, flags)
           Fetch an mbuf with a mbuf cluster attached to it.  If one of the allocations fails,
           the entire allocation fails.  This routine is the preferred way of fetching both the
           mbuf and mbuf cluster together, as it avoids having to unlock/relock between
           allocations.  Returns NULL on failure.

           m_getclr(how, type)
           Allocate an mbuf and zero out the data region.

           m_free(mbuf)
           Frees mbuf.  Returns m_next of the freed mbuf.

     The functions below operate on mbuf chains.

           m_freem(mbuf)
           Free an entire mbuf chain, including any external storage.

           m_adj(mbuf, len)
           Trim len bytes from the head of an mbuf chain if len is positive, from the tail
           otherwise.

           m_append(mbuf, len, cp)
           Append len bytes of data cp to the mbuf chain.  Extend the mbuf chain if the new data
           does not fit in existing space.

           m_prepend(mbuf, len, how)
           Allocate a new mbuf and prepend it to the mbuf chain, handle M_PKTHDR properly.  Note:
           It does not allocate any mbuf clusters, so len must be less than MLEN or MHLEN,
           depending on the M_PKTHDR flag setting.

           m_copyup(mbuf, len, dstoff)
           Similar to m_pullup() but copies len bytes of data into a new mbuf at dstoff bytes
           into the mbuf.  The dstoff argument aligns the data and leaves room for a link layer
           header.  Returns the new mbuf chain on success, and frees the mbuf chain and returns
           NULL on failure.  Note: The function does not allocate mbuf clusters, so len + dstoff
           must be less than MHLEN.

           m_pullup(mbuf, len)
           Arrange that the first len bytes of an mbuf chain are contiguous and lay in the data
           area of mbuf, so they are accessible with mtod(mbuf, type).  It is important to
           remember that this may involve reallocating some mbufs and moving data so all pointers
           referencing data within the old mbuf chain must be recalculated or made invalid.
           Return the new mbuf chain on success, NULL on failure (the mbuf chain is freed in this
           case).  Note: It does not allocate any mbuf clusters, so len must be less than MHLEN.

           m_pulldown(mbuf, offset, len, offsetp)
           Arrange that len bytes between offset and offset + len in the mbuf chain are
           contiguous and lay in the data area of mbuf, so they are accessible with mtod(mbuf,
           type).  len must be smaller than, or equal to, the size of an mbuf cluster.  Return a
           pointer to an intermediate mbuf in the chain containing the requested region; the
           offset in the data region of the mbuf chain to the data contained in the returned mbuf
           is stored in *offsetp.  If offp is NULL, the region may be accessed using mtod(mbuf,
           type).  If offp is non-NULL, the region may be accessed using mtod(mbuf, uint8_t, +,
           *offsetp).  The region of the mbuf chain between its beginning and off is not
           modified, therefore it is safe to hold pointers to data within this region before
           calling m_pulldown().

           m_copym(mbuf, offset, len, how)
           Make a copy of an mbuf chain starting offset bytes from the beginning, continuing for
           len bytes.  If len is M_COPYALL, copy to the end of the mbuf chain.  Note: The copy is
           read-only, because the mbuf clusters are not copied, only their reference counts are
           incremented.

           m_copypacket(mbuf, how)
           Copy an entire packet including header, which must be present.  This is an optimized
           version of the common case m_copym(mbuf, 0, M_COPYALL, how).  Note: the copy is read-
           only, because the mbuf clusters are not copied, only their reference counts are
           incremented.

           m_dup(mbuf, how)
           Copy a packet header mbuf chain into a completely new mbuf chain, including copying
           any mbuf clusters.  Use this instead of m_copypacket() when you need a writable copy
           of an mbuf chain.

           m_copydata(mbuf, offset, len, buf)
           Copy data from an mbuf chain starting off bytes from the beginning, continuing for len
           bytes, into the indicated buffer buf.

           m_copyback(mbuf, offset, len, buf)
           Copy len bytes from the buffer buf back into the indicated mbuf chain, starting at
           offset bytes from the beginning of the mbuf chain, extending the mbuf chain if
           necessary.  Note: It does not allocate any mbuf clusters, just adds mbufs to the mbuf
           chain.  It is safe to set offset beyond the current mbuf chain end: zeroed mbufs will
           be allocated to fill the space.

           m_length(mbuf, last)
           Return the length of the mbuf chain, and optionally a pointer to the last mbuf.

           m_dup_pkthdr(to, from, how)
           Upon the function's completion, the mbuf to will contain an identical copy of
           from->m_pkthdr and the per-packet attributes found in the mbuf chain from.  The mbuf
           from must have the flag M_PKTHDR initially set, and to must be empty on entry.

           m_move_pkthdr(to, from)
           Move m_pkthdr and the per-packet attributes from the mbuf chain from to the mbuf to.
           The mbuf from must have the flag M_PKTHDR initially set, and to must be empty on
           entry.  Upon the function's completion, from will have the flag M_PKTHDR and the per-
           packet attributes cleared.

           m_fixhdr(mbuf)
           Set the packet-header length to the length of the mbuf chain.

           m_devget(buf, len, offset, ifp, copy)
           Copy data from a device local memory pointed to by buf to an mbuf chain.  The copy is
           done using a specified copy routine copy, or bcopy() if copy is NULL.

           m_cat(m, n)
           Concatenate n to m.  Both mbuf chains must be of the same type.  N is still valid
           after the function returned.  Note: It does not handle M_PKTHDR and friends.

           m_split(mbuf, len, how)
           Partition an mbuf chain in two pieces, returning the tail: all but the first len
           bytes.  In case of failure, it returns NULL and attempts to restore the mbuf chain to
           its original state.

           m_apply(mbuf, off, len, f, arg)
           Apply a function to an mbuf chain, at offset off, for length len bytes.  Typically
           used to avoid calls to m_pullup() which would otherwise be unnecessary or undesirable.
           arg is a convenience argument which is passed to the callback function f.

           Each time f() is called, it will be passed arg, a pointer to the data in the current
           mbuf, and the length len of the data in this mbuf to which the function should be
           applied.

           The function should return zero to indicate success; otherwise, if an error is
           indicated, then m_apply() will return the error and stop iterating through the mbuf
           chain.

           m_getptr(mbuf, loc, off)
           Return a pointer to the mbuf containing the data located at loc bytes from the
           beginning of the mbuf chain.  The corresponding offset into the mbuf will be stored in
           *off.

           m_defrag(m0, how)
           Defragment an mbuf chain, returning the shortest possible chain of mbufs and clusters.
           If allocation fails and this can not be completed, NULL will be returned and the
           original chain will be unchanged.  Upon success, the original chain will be freed and
           the new chain will be returned.  how should be either M_WAITOK or M_NOWAIT, depending
           on the caller's preference.

           This function is especially useful in network drivers, where certain long mbuf chains
           must be shortened before being added to TX descriptor lists.

           m_unshare(m0, how)
           Create a version of the specified mbuf chain whose contents can be safely modified
           without affecting other users.  If allocation fails and this operation can not be
           completed, NULL will be returned.  The original mbuf chain is always reclaimed and the
           reference count of any shared mbuf clusters is decremented.  how should be either
           M_WAITOK or M_NOWAIT, depending on the caller's preference.  As a side-effect of this
           process the returned mbuf chain may be compacted.

           This function is especially useful in the transmit path of network code, when data
           must be encrypted or otherwise altered prior to transmission.

HARDWARE-ASSISTED CHECKSUM CALCULATION

     This section currently applies to TCP/IP only.  In order to save the host CPU resources,
     computing checksums is offloaded to the network interface hardware if possible.  The
     m_pkthdr member of the leading mbuf of a packet contains two fields used for that purpose,
     int csum_flags and int csum_data.  The meaning of those fields depends on the direction a
     packet flows in, and on whether the packet is fragmented.  Henceforth, csum_flags or
     csum_data of a packet will denote the corresponding field of the m_pkthdr member of the
     leading mbuf in the mbuf chain containing the packet.

     On output, checksum offloading is attempted after the outgoing interface has been determined
     for a packet.  The interface-specific field ifnet.if_data.ifi_hwassist (see ifnet(9)) is
     consulted for the capabilities of the interface to assist in computing checksums.  The
     csum_flags field of the packet header is set to indicate which actions the interface is
     supposed to perform on it.  The actions unsupported by the network interface are done in the
     software prior to passing the packet down to the interface driver; such actions will never
     be requested through csum_flags.

     The flags demanding a particular action from an interface are as follows:

           CSUM_IP   The IP header checksum is to be computed and stored in the corresponding
                     field of the packet.  The hardware is expected to know the format of an IP
                     header to determine the offset of the IP checksum field.

           CSUM_TCP  The TCP checksum is to be computed.  (See below.)

           CSUM_UDP  The UDP checksum is to be computed.  (See below.)

     Should a TCP or UDP checksum be offloaded to the hardware, the field csum_data will contain
     the byte offset of the checksum field relative to the end of the IP header.  In this case,
     the checksum field will be initially set by the TCP/IP module to the checksum of the pseudo
     header defined by the TCP and UDP specifications.

     On input, an interface indicates the actions it has performed on a packet by setting one or
     more of the following flags in csum_flags associated with the packet:

           CSUM_IP_CHECKED  The IP header checksum has been computed.

           CSUM_IP_VALID    The IP header has a valid checksum.  This flag can appear only in
                            combination with CSUM_IP_CHECKED.

           CSUM_DATA_VALID  The checksum of the data portion of the IP packet has been computed
                            and stored in the field csum_data in network byte order.

           CSUM_PSEUDO_HDR  Can be set only along with CSUM_DATA_VALID to indicate that the IP
                            data checksum found in csum_data allows for the pseudo header defined
                            by the TCP and UDP specifications.  Otherwise the checksum of the
                            pseudo header must be calculated by the host CPU and added to
                            csum_data to obtain the final checksum to be used for TCP or UDP
                            validation purposes.

     If a particular network interface just indicates success or failure of TCP or UDP checksum
     validation without returning the exact value of the checksum to the host CPU, its driver can
     mark CSUM_DATA_VALID and CSUM_PSEUDO_HDR in csum_flags, and set csum_data to 0xFFFF
     hexadecimal to indicate a valid checksum.  It is a peculiarity of the algorithm used that
     the Internet checksum calculated over any valid packet will be 0xFFFF as long as the
     original checksum field is included.

STRESS TESTING

     When running a kernel compiled with the option MBUF_STRESS_TEST, the following
     sysctl(8)-controlled options may be used to create various failure/extreme cases for testing
     of network drivers and other parts of the kernel that rely on mbufs.

     net.inet.ip.mbuf_frag_size
            Causes ip_output() to fragment outgoing mbuf chains into fragments of the specified
            size.  Setting this variable to 1 is an excellent way to test the long mbuf chain
            handling ability of network drivers.

     kern.ipc.m_defragrandomfailures
            Causes the function m_defrag() to randomly fail, returning NULL.  Any piece of code
            which uses m_defrag() should be tested with this feature.

RETURN VALUES

     See above.

SEE ALSO

     ifnet(9), mbuf_tags(9)

HISTORY

     Mbufs appeared in an early version of BSD.  Besides being used for network packets, they
     were used to store various dynamic structures, such as routing table entries, interface
     addresses, protocol control blocks, etc.  In more recent FreeBSD use of mbufs is almost
     entirely limited to packet storage, with uma(9) zones being used directly to store other
     network-related memory.

     Historically, the mbuf allocator has been a special-purpose memory allocator able to run in
     interrupt contexts and allocating from a special kernel address space map.  As of
     FreeBSD 5.3, the mbuf allocator is a wrapper around uma(9), allowing caching of mbufs,
     clusters, and mbuf + cluster pairs in per-CPU caches, as well as bringing other benefits of
     slab allocation.

AUTHORS

     The original mbuf manual page was written by Yar Tikhiy.  The uma(9) mbuf allocator was
     written by Bosko Milekic.