Provided by: freebsd-manpages_9.2+1-1_all bug

NAME

     ieee80211_amrr — 802.11 network driver transmit rate control support

SYNOPSIS

     #include <net80211/ieee80211_amrr.h>

     void
     ieee80211_amrr_init(struct ieee80211_amrr *, struct ieee80211vap *, int amin, int amax,
         int interval);

     void
     ieee80211_amrr_cleanup(struct ieee80211_amrr *);

     void
     ieee80211_amrr_setinterval(struct ieee80211_amrr *, int interval);

     void
     ieee80211_amrr_node_init(struct ieee80211_amrr *, struct ieee80211_amrr_node *,
         struct ieee80211_node *);

     int
     ieee80211_amrr_choose(struct ieee80211_node *, struct ieee80211_amrr_node *);

     void
     ieee80211_amrr_tx_complete(struct ieee80211_amrr_node *, int ok, int retries);

     void
     ieee80211_amrr_tx_update(struct ieee80211_amrr_node *, int txnct, int success,
         int retrycnt);

DESCRIPTION

     ieee80211_amrr is an implementation of the AMRR transmit rate control algorithm for drivers
     that use the net80211 software layer.  A rate control algorithm is responsible for choosing
     the transmit rate for each frame.  To maximize throughput algorithms try to use the highest
     rate that is appropriate for the operating conditions.  The rate will vary as conditions
     change; the distance between two stations may change, transient noise may be present that
     affects signal quality, etc.  ieee80211_amrr uses very simple information from a driver to
     do it's job: whether a frame was successfully delivered and how many transmit attempts were
     made.  While this enables its use with virtually any wireless device it limits it's
     effectiveness--do not expect it to function well in difficult environments and/or respond
     quickly to changing conditions.

     ieee80211_amrr requires per-vap state and per-node state for each station it is to select
     rates for.  The API's are designed for drivers to pre-allocate state in the driver-private
     extension areas of each vap and node.  For example the ral(4) driver defines a vap as:

           struct rt2560_vap {
                   struct ieee80211vap     ral_vap;
                   struct ieee80211_beacon_offsets ral_bo;
                   struct ieee80211_amrr   amrr;

                   int      (*ral_newstate)(struct ieee80211vap *,
                                 enum ieee80211_state, int);
           };

     The amrr structure member holds the per-vap state for ieee80211_amrr and ral(4) initializes
     it in the vap create method with:

           ieee80211_amrr_init(&rvp->amrr, vap,
               IEEE80211_AMRR_MIN_SUCCESS_THRESHOLD,
               IEEE80211_AMRR_MAX_SUCCESS_THRESHOLD,
               500 /* ms */);

     The node is defined as:

           struct rt2560_node {
                   struct ieee80211_node   ni;
                   struct ieee80211_amrr_node amrr;
           };

     with initialization done in the driver's iv_newassoc method:

           static void
           rt2560_newassoc(struct ieee80211_node *ni, int isnew)
           {
                   struct ieee80211vap *vap = ni->ni_vap;

                   ieee80211_amrr_node_init(&RT2560_VAP(vap)->amrr,
                       &RT2560_NODE(ni)->amrr, ni);
           }

     Once ieee80211_amrr state is setup, transmit rates are requested by calling
     ieee80211_amrr_choose() in the transmit path; e.g.:

           tp = &vap->iv_txparms[ieee80211_chan2mode(ni->ni_chan)];
           if (IEEE80211_IS_MULTICAST(wh->i_addr1)) {
                   rate = tp->mcastrate;
           } else if (m0->m_flags & M_EAPOL) {
                   rate = tp->mgmtrate;
           } else if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE) {
                   rate = tp->ucastrate;
           } else {
                   (void) ieee80211_amrr_choose(ni, &RT2560_NODE(ni)->amrr);
                   rate = ni->ni_txrate;
           }

     Note a rate is chosen only for unicast data frames when a fixed transmit rate is not
     configured; the other cases are handled with the net80211 transmit parameters.  Note also
     that ieee80211_amrr_choose() writes the chosen rate in ni_txrate; this eliminates copying
     the value as it is exported to user applications so they can display the current transmit
     rate in status.

     The remaining work a driver must do is feed status back to ieee80211_amrr when a frame
     transmit completes using ieee80211_amrr_tx_complete().  Drivers that poll a device to
     retrieve statistics can use ieee80211_amrr_tx_update() (instead or in addition).

SEE ALSO

     ieee80211(9), ieee80211_output(9)