Provided by: live-build_3.0~a57-1ubuntu25.6_all bug

NAME

       lb config - Create config directory

SYNOPSIS

       lb config [live-build options]

       lb config
            [--apt apt|aptitude]
            [--apt-ftp-proxy URL]
            [--apt-http-proxy URL]
            [--apt-indices true|false|none]
            [--apt-options OPTION|"OPTIONS"]
            [--aptitude-options OPTION|"OPTIONS"]
            [--apt-pipeline DEPTH]
            [--apt-recommends true|false]
            [--apt-secure true|false]
            [--apt-source-archives true|false]
            [-a|--architectures ARCHITECTURE]
            [-b|--binary-images iso|iso-hybrid|netboot|tar|hdd|virtual-hdd]
            [--binary-filesystem fat16|fat32|ext2|ext3|ext4]
            [--bootappend-install PARAMETER|"PARAMETERS"]
            [--bootappend-live PARAMETER|"PARAMETERS"]
            [--bootloader grub|syslinux|yaboot]
            [--bootstrap cdebootstrap|cdebootstrap-static|debootstrap|copy]
            [-f|--bootstrap-flavour minimal|standard]
            [--bootstrap-keyring PACKAGE]
            [--cache true|false]
            [--cache-indices true|false]
            [--cache-packages true|false]
            [--cache-stages STAGE|"STAGES"]
            [--checksums md5|sha1|sha256|none]
            [--compression bzip2|gzip|lzip|none]
            [--config GIT_URL::GIT_ID]
            [--build-with-chroot true|false]
            [--chroot-filesystem ext2|ext3|ext4|squashfs|jffs2|none]
            [--clean]
            [-c|--conffile FILE]
            [--debconf-frontend dialog|editor|noninteractive|readline]
            [--debconf-nowarnings true|false]
            [--debconf-priority low|medium|high|critical]
            [--debian-installer true|cdrom|netinst|netboot|businesscard|live|false]
            [--debian-installer-distribution daily|CODENAME]
            [--debian-installer-preseedfile FILE|URL]
            [--debian-installer-gui true|false]
            [--debug]
            [-d|--distribution CODENAME]
            [--parent-distribution CODENAME]
            [--parent-debian-installer-distribution CODENAME]
            [--dump]
            [--fdisk fdisk|fdisk.dist]
            [--firmware-binary true|false]
            [--firmware-chroot true|false]
            [--force]
            [--grub-splash FILE]
            [--gzip-options OPTION|"OPTIONS"]
            [--hooks FILE]
            [--ignore-system-defaults]
            [--initramfs auto|none|live-boot|casper]
            [--initramfs-compression bzip2|gzip|lzma]
            [--initsystem sysvinit|runit|systemd|upstart|none]
            [--interactive shell]
            [--isohybrid-options OPTION|"OPTIONS"]
            [--iso-application NAME]
            [--iso-preparer NAME]
            [--iso-publisher NAME]
            [--iso-volume NAME]
            [--jffs2-eraseblock SIZE]
            [--keyring-packages PACKAGE|"PACKAGES"]
            [-k|--linux-flavours FLAVOUR|"FLAVOURS"]
            [--linux-packages "PACKAGES"]
            [--losetup losetup|losetup.orig]
            [--memtest memtest86+|memtest86|none]
            [-m|--parent-mirror-bootstrap URL]
            [--parent-mirror-chroot URL]
            [--parent-mirror-chroot-security URL]
            [--parent-mirror-chroot-volatile URL]
            [--parent-mirror-chroot-backports URL]
            [--parent-mirror-binary URL]
            [--parent-mirror-binary-security URL]
            [--parent-mirror-binary-volatile URL]
            [--parent-mirror-binary-backports URL]
            [--parent-mirror-debian-installer URL]
            [--mirror-bootstrap URL]
            [--mirror-chroot URL]
            [--mirror-chroot-security URL]
            [--mirror-chroot-volatile URL]
            [--mirror-chroot-backports URL]
            [--mirror-binary URL]
            [--mirror-binary-security URL]
            [--mirror-binary-volatile URL]
            [--mirror-binary-backports URL]
            [--mirror-debian-installer URL]
            [--mode debian|emdebian|progress|ubuntu|kubuntu]
            [--system live|normal]
            [--net-root-filesystem nfs|cfs]
            [--net-root-mountoptions OPTIONS]
            [--net-root-path PATH]
            [--net-root-server IP|HOSTNAME]
            [--net-cow-filesystem nfs|cfs]
            [--net-cow-mountoptions OPTIONS]
            [--net-cow-path PATH]
            [--net-cow-server IP|HOSTNAME]
            [--net-tarball true|false]
            [-p|--package-lists LIST|"LISTS"]
            [--quiet]
            [--root-command sudo]
            [--use-fakeroot true|false]
            [--archives ARCHIVE|"ARCHIVES"]
            [--archive-areas ARCHIVE_AREA|"ARCHIVE_AREAS"]
            [--parent-archive-areas PARENT_ARCHIVE_AREA|"PARENT_ARCHIVE_AREAS"]
            [--security true|false]
            [--source true|false]
            [-s|--source-images iso|netboot|tar|hdd]
            [--syslinux-theme THEME_SUFFIX]
            [--tasksel apt|aptitude|tasksel]
            [--templates PATH]
            [--hdd-size MB]
            [--volatile true|false]
            [--backports true|false]
            [--exposed-root true|false]
            [--verbose]
            [--win32-loader true|false]

DESCRIPTION

       lb  config  is  a  high-level  command  (porcelain) of live-build(7), the Debian Live tool
       suite.

       lb config populates the configuration directory for live-build. By default, this directory
       is named 'config' and is created in the current directory where lb config was executed.

       Note:  Currently  lb config tries to be smart and sets defaults for some options depending
       on the setting of other options (e.g. which linux packages to be used depending  on  if  a
       squeeze  system  gets  build or not). This means that when generating a new configuration,
       you should call lb config only once with all options specified. Calling it  several  times
       with  only  a subset of the options each can result in non working configurations. This is
       also caused by the fact that lb config called with one option only  changes  that  option,
       and  leaves  everything  else  as  is unless its not defined. However, lb config does warn
       about know impossible or likely impossible combinations that would  lead  to  non  working
       live systems. If unsure, remove config/{binary,bootstrap,chroot,common,source} and call lb
       config again.

OPTIONS

       In addition to its specific options lb config understands all generic live-build  options.
       See live-build(7) for a complete list of all generic live-build options.

       --apt apt|aptitude
           defines  if  apt-get  or aptitude is used to install packages when building the image.
           The default is apt.

       --apt-ftp-proxy URL
           sets the ftp proxy to be used by apt. By  default,  this  is  empty.  Note  that  this
           variable  is only for the proxy that gets used by apt internally within the chroot, it
           is not used for anything else.

       --apt-http-proxy URL
           sets the http proxy to be used by apt. By default,  this  is  empty.  Note  that  this
           variable  is only for the proxy that gets used by apt internally within the chroot, it
           is not used for anything else.

       --apt-indices true|false|none
           defines if the resulting images should have apt indices or not and defaults  to  true.
           If set to none, no indices are included at all.

       --apt-options OPTION|"OPTIONS"
           defines  the  default  options  that  will  be appended to every apt call that is made
           inside chroot during the building of the image. By default, this is set  to  --yes  to
           allow non-interactive installation of packages.

       --aptitude-options OPTION|"OPTIONS"
           defines  the default options that will be appended to every aptitude call that is made
           inside chroot during building of the image. By default, this is set to --assume-yes to
           allow non-interactive installation of packages.

       --apt-pipeline DEPTH
           sets  the  depth of the apt/aptitude pipeline. In cases where the remote server is not
           RFC conforming or buggy (such as Squid 2.0.2) this option can be a value from 0  to  5
           indicating  how  many  outstanding  requests  APT should send. A value of zero MUST be
           specified if the remote host does not properly linger on TCP connections  -  otherwise
           data  corruption will occur. Hosts which require this are in violation of RFC 2068. By
           default, live-build does not set this option.

       --apt-recommends true|false
           defines if apt should install recommended packages automatically. By default, this  is
           true except in emdebian mode.

       --apt-secure true|false
           defines if apt should check repository signatures. This is true by default.

       --apt-source-archives true|false
           defines  if  deb-src  entries  should  be included in the resulting live image or not,
           defaults to on.

       -a|--architectures ARCHITECTURE
           defines the architecture of the to be build image. By default, this is set to the host
           architecture.  Note  that  you cannot crossbuild for another architecture if your host
           system is not able to execute binaries  for  the  target  architecture  natively.  For
           example,  building  amd64 images on i386 and vice versa is possile if you have a 64bit
           capable i386 processor and the right kernel. But building powerpc images  on  an  i386
           system is not possible.

       -b|--binary-images iso|iso-hybrid|netboot|tar|hdd
           defines  the image type to build. By default, for images using syslinux this is set to
           iso-hybrid to build CD/DVD  images  that  may  also  be  used  like  hdd  images,  for
           non-syslinux images, it defaults to iso.

       --binary-filesystem fat16|fat32|ext2|ext3|ext4
           defines  the  filesystem  to be used in the image type. This only has an effect if the
           selected binary image type does allow  to  choose  a  filesystem.  For  example,  when
           selection  iso  the  resulting CD/DVD has always the filesystem ISO9660. When building
           hdd images for usb sticks, this is active. Note that  it  defaults  to  fat16  on  all
           architectures  except  sparc  where  it defaults to ext4. Also note that if you choose
           fat16 and your resulting binary image gets bigger  than  2GB,  the  binary  filesystem
           automatically gets switched to fat32.

       --bootappend-install PARAMETER|"PARAMETERS"
           sets boot parameters specific to debian-installer, if included.

       --bootappend-live PARAMETER|"PARAMETERS"
           sets  boot  parameters specific to debian-live. A complete list of boot parameters can
           be found in the live-boot(7) and live-config(7) manual pages.

       --bootloader grub|syslinux|yaboot
           defines which bootloader is beeing used in the  generated  image.  This  has  only  an
           effect  if  the  selected  binary  image type does allow to choose the bootloader. For
           example, if you build a iso, always syslinux (or  more  precise,  isolinux)  is  being
           used.  Also  note that some combinations of binary images types and bootloaders may be
           possible but live-build does not support them yet. lb config will fail to create  such
           a  not  yet supported configuration and give a explanation about it. For hdd images on
           amd64 and i386, the default is syslinux. yaboot is only used on powerpc.

       --bootstrap cdebootstrap|cdebootstrap-static|debootstrap|copy
           defines which program is used to bootstrap the debian chroot, default is  debootstrap.
           Note  that  if you set the bootstrap program to copy, then your host system is copied.
           This can be useful if you want to convert/clone your existing host system into a  live
           system,  however,  make  sure  you do have enough free space as this can, depending on
           your host system, get quite big.

       -f|--bootstrap-flavour minimal|standard
           defines if the bootstrap program should bootstrap the standard system (all packages of
           priority  required  and  important,  which  is  the default) or a minimal system (only
           packages of priority required, plus apt).

       --bootstrap-keyring PACKAGE
           sets the archive keyring package to be used. Default is debian-archive-keyring.

       --cache true|false
           defines globally if any cache should be used at all. Different caches can be controled
           through the their own options.

       --cache-indices true|false
           defines  if  downloaded  package  indices and lists should be cached which is false by
           default. Enabling it would allow to rebuild an image completely offline, however,  you
           would not get updates anymore then.

       --cache-packages true|false
           defines  if  downloaded  packages  files  should  be  cached which is true by default.
           Disabling it does save space consumtion in your build directory, but remember that you
           will  cause  much  unnecessary  traffic if you do a couple of rebuilds. In general you
           should always leave it true, however, in some particular rare build setups, it can  be
           faster  to  refetch  packages from the local network mirror rather than to utilize the
           local disk.

       --cache-stages true|false|STAGE|"STAGES"
           sets which stages should be cached. By default set to bootstrap. As  an  exception  to
           the  normal  stage  names,  also  rootfs  can  be  used here which does only cache the
           generated root filesystem in filesystem.{dir,ext*,squashfs}.  This  is  useful  during
           development  if  you  want  to  rebuild  the  binary stage but not regenerate the root
           filesystem all the time.

       --checksums md5|sha1|sha256|none
           defines if the binary image should contain a  file  called  md5sums.txt,  sha1sums.txt
           and/or  sha256sums.txt.  These  lists  all  files  on  the  image  together with their
           checksums. This in turn can be used by live-boots built-in integrity-check  to  verify
           the medium if specified at boot prompt. In general, this should not be false and is an
           important feature of live system released to the public. However,  during  development
           of very big images it can save some time by not calculating the checksums.

       --compression bzip2|gzip|lzip|none
           defines the compression program to be used to compress tarballs. Defaults to gzip.

       --config GIT_URL::GIT_ID
           allows  to  bootstrap  a config tree from a git repositories, optionally appended by a
           Git Id (branch, commit, tag, etc.).

       --build-with-chroot true|false
           defines whetever live-build should use the tools from within the chroot to  build  the
           binary  image  or  not  by  using and including the host systems tools. This is a very
           dangerous option, using the tools of the host system can lead to tainted and even non-
           bootable  images  if  the host systems version of the required tools (mainly these are
           the bootloaders such as syslinux, grub and yaboot, and the auxilliary  tools  such  as
           dosfstools,  genisoimage,  squashfs-tools  and  others)  do not exactely match what is
           present at build-time in the target distribution. Never do disable this option  unless
           you  are  exactely  sure  what  you  are  doing  and  have  completely  understood its
           consequences.

       --chroot-filesystem ext2|ext3|ext4|squashfs|jffs2|none
           defines which filesystem type should be used for the root filesystem image. If you use
           none, then no filesystem image is created and the root filesystem content is copied on
           the binary image filesystem as flat files. Depending on  what  binary  filesystem  you
           have  choosen, it may not be possible to build with such a plain root filesystem, e.g.
           fat16/fat32 will not work as linux does not support to run directly on them.

       --clean
           minimizes  config  directory  by  automatically  removing  unused   and   thus   empty
           subdirectories.

       -c|--conffile FILE
           using a user specified alternative configuration file in addition to the normally used
           one in the config directory.

       --debconf-frontend dialog|editor|noninteractive|readline
           defines what value the debconf frontend should be set to inside the chroot. Note  that
           setting  it  to  anything  by  noninteractive,  which is the default, makes your build
           asking questions during the build.

       --debconf-nowarnings true|false
           defines if warnings of debconf should be displayed or not. Warnings from  debconf  are
           generally  very  rare and by default, we skip them, if any, in order to keep the build
           process entirely non interactive.

       --debconf-priority low|medium|high|critical
           defines what value the debconf priority  shoul  dbe  set  to  inside  the  chroot.  By
           default,  it  is  set to critical, which means that almost no questions are displayed.
           Note that this only has an effect if you  use  any  debconf  frontend  different  from
           noninteractive.

       --debian-installer true|cdrom|netinst|netboot|businesscard|live|false
           defines  which  type,  if  any,  of  the  debian-installer  should  be included in the
           resulting binary image. By default, no installer is included. All  available  flavours
           except  live  are the identical configurations used on the installer media produced by
           regular debian-cd. When live is choosen, the live-installer udeb is included  so  that
           debian-installer  will  behave different than usual - instead of installing the debian
           system from packages from the medium or the network, it installs the  live  system  to
           the disk.

       --debian-installer-distribution daily|CODENAME
           defines  the  distribution  where the debian-installer files should be taken out from.
           Normally, this should be set to the same distribution as  the  live  system.  However,
           some times, one wants to use a newer or even daily built installer.

       --debian-installer-preseedfile FILE|URL
           sets  the  filename  or  URL  for  an optionally used and included preseeding file for
           debian-installer. If config/binary_debian-installer/preseed.cfg  exists,  it  will  be
           used by default.

       --debian-installer-gui true|false
           defines  if  the  debian-installer  graphical  GTK interface should be true or not. In
           Debian mode and for most versions of Ubuntu, this option is  true,  whereas  otherwise
           false, by default.

       --debug
           turn on debugging informational messages.

       -d|--distribution CODENAME
           defines the distribution of the resulting live system.

       -d|--parent-distribution CODENAME
           defines the parent distribution for derivatives of the resulting live system.

       -d|--parent-debian-installer-distribution CODENAME
           defines the parent debian-installer distribution for derivatives of the resulting live
           system.

       --dump
           prepares a report of the currently present live system configuration and  the  version
           of live-build used. This is useful to provide if you submit bug reports, we do get all
           informations required for us to locate and replicate an error.

       --fdisk fdisk|fdisk.dist
           sets the filename of the fdisk binary from the host system that should be  used.  This
           is autodetected and does generally not need any customization.

       --force
           forces re-execution of already run stages. Use only if you know what you are doing. It
           is generally safer to use lb clean to clean up before re-executing lb build.

       --grub-splash FILE
           defines the name of an optional to be included splash  screen  graphic  for  the  grub
           bootloader.

       --gzip-options OPTION|"OPTIONS"
           defines  the  default options that will be appended to (almost) every gzip call during
           the building of the image. By default, this is set  to  --best  to  use  highest  (but
           slowest) compression. Dynamically, if the host system supports it, also --rsyncable is
           added.

       --hooks FILE
           defines  which  hooks  available  in  /usr/share/live/build/examples/hooks  should  be
           activated.  Normally,  there  are no hooks executed. Make sure you know and understood
           the hook before you enable it.

       --ignore-system-defaults
           lb  config  by  default  reads   system   defaults   from   /etc/live/build.conf   and
           /etc/live/build.d  when  generating a new live system config directory. This is useful
           if you want to set global settings, such  as  mirror  locations,  and  don't  want  to
           specify them all of the time.

       --initramfs auto|none|live-boot|casper
           sets   the   name  of  package  that  contains  the  live  system  specific  initramfs
           modification. By default, auto is used, which means that at build time  of  the  image
           rather  than on configuration time, the value will be expanded to casper when building
           ubuntu systems, to live-boot for all other systems. Using  'none'  is  useful  if  the
           resulting system image should not be a live image (experimental).

       --initramfs-compression bzip2|gzip|lzma]
           defines  the  compression  program  to  be used to compress the initramfs. Defaults to
           gzip.

       --interactive shell
           defines if after the chroot stage and before the beginning  of  the  binary  stage,  a
           interactive  shell  login  should be spawned in the chroot in order to allow you to do
           manual customizations. Once you close the shell with logout or exit,  the  build  will
           continue  as  usual. Note that it's strongly discouraged to use this for anything else
           than testing. Modifications that should be present in all  builds  of  a  live  system
           should  be  properly  made through hooks. Everything else destroys the beauty of being
           able to completely automatise the build process and  making  it  non  interactive.  By
           default, this is of course false.

       --isohybrid-options OPTION|"OPTIONS"
           defines options to pass to isohybrid.

       --iso-application NAME
           sets  the  APPLICATION field in the header of a resulting CD/DVD image and defaults to
           "Debian Live" in debian mode, and to "Emdebian Live" in  emdebian  mode,  and  "Ubuntu
           Live" in ubuntu mode.

       --iso-preparer NAME
           sets  the PREPARER field in the header of a resulting CD/DVD image. By default this is
           set to "live-build VERSION; http://packages.qa.debian.org/live-build", whereas VERSION
           is expanded to the version of live-build that was used to build the image.

       --iso-publisher NAME
           sets  the  PUBLISHED field in the header of a resulting CD/DVD image. By default, this
           is set to 'Debian Live project; http:/live.debian.net/; debian-live@lists.debian.org'.
           Remember  to  change  this  to  the appropriate values at latest when you distributing
           custom and unofficial images.

       --iso-volume NAME
           sets the VOLUME field in the header of a resulting  CD/DVD  and  defaults  to  '(MODE)
           (DISTRIBUTION)  (DATE)'  whereas  MODE  is  expanded  to  the name of the mode in use,
           DISTRIBUTION the distribution name, and DATE with the current date  and  time  of  the
           generation.

       --jffs2-eraseblock SIZE
           sets  the  eraseblock  size  for  a  JFFS2  (Second  Journalling  Flash  File  System)
           filesystem. The default is 64 KiB. If you use an erase block size different  than  the
           erase  block  size  of  the target MTD device, JFFS2 may not perform optimally. If the
           SIZE specified is below 4096, the units are assumed to be KiB.

       --keyring-packages PACKAGE|"PACKAGES"
           sets the keyring package or additional keyring packages. By default  this  is  set  to
           debian-archive-keyring.

       -k|--linux-flavours FLAVOUR|"FLAVOURS"
           sets the kernel flavours to be installed. Note that in case you specify more than that
           the first will be configured the default kernel that gets booted.

       --linux-packages "PACKAGES"
           sets the internal name of the kernel packages naming scheme. If you use debian  kernel
           packages,  you will not have to adjust it. If you decide to use custom kernel packages
           that do not follow the debian naming scheme, remember to set this option to  the  stub
           of  the  packages  only  (for  debian  this  is linux-image-2.6), so that STUB-FLAVOUR
           results in a valid package name (for debian e.g. linux-image-2.6-486). Preferably  you
           use  the  meta  package  name, if any, for the stub, so that your configuration is ABI
           independent. Also don't forget that you have to include stubs of  the  binary  modules
           packages for unionfs or aufs, and squashfs if you built them out-of-tree.

       --losetup losetup|losetup.orig
           sets the filename of the losetup binary from the host system that should be used. This
           is autodetected and does generally not need any customization.

       --memtest memtest86+|memtest86|none
           defines if memtest, memtest86+ or no memory  tester  at  all  should  be  included  as
           secondary  bootloader  configuration.  This  is  only  available on amd64 and i386 and
           defaults to memtest86+.

       -m|--parent-mirror-bootstrap URL
           sets the location of the debian package mirror that should be used to bootstrap  from.
           This  defaults  to http://ftp.de.debian.org/debian/ which may not be a good default if
           you live outside of Europe.

       --parent-mirror-chroot URL
           sets the location of the debian package mirror that will be used to fetch the packages
           in  order  to  build  the  live  system.  By  default,  this  is  set  to the value of
           --parent-mirror-bootstrap.

       --parent-mirror-chroot-security URL
           sets the location of the debian security package mirror that will be used to fetch the
           packages   in   order   to   build  the  live  system.  By  default,  this  points  to
           http://security.debian.org/debian/.

       --parent-mirror-chroot-volatile URL
           sets the location of the debian volatile package mirror that will  be  used  to  fetch
           packages  in  order  to build the live system. By default, this is set to the value of
           --parent-mirror-chroot.

       --parent-mirror-chroot-backports URL
           sets the location of the debian backports package mirror that will be  used  to  fetch
           packages   in   order   to   build  the  live  system.  By  default,  this  points  to
           http://backports.debian.org/debian-backports/.

       --parent-mirror-binary URL
           sets the location of the debian package mirror that should end up  configured  in  the
           final image and which is the one a user would see and use. This has not necessarily to
           be the same that is used to build the image, e.g. if you use a local mirror  but  want
           to  have  an official mirror in the image. By default, 'http://cdn.debian.net/debian/'
           is used.

       --parent-mirror-binary-security URL
           sets the location of the debian security package mirror that should end up  configured
           in the final image. By default, 'http://cdn.debian.net/debian-security/' is used.

       --parent-mirror-binary-volatile URL
           sets  the location of the debian volatile package mirror that should end up configured
           in the final image. By default, the value of --parent-mirror-binary is used.

       --parent-mirror-binary-backports URL
           sets the location of the debian backports package mirror that should end up configured
           in  the  final  image.  By default, 'http://backports.debian.org/debian-backports/' is
           used.

       --parent-mirror-debian-installer URL
           sets the location of the mirror that will  be  used  to  fetch  the  debian  installer
           images. By default, this points to the same mirror used to build the live system, i.e.
           the value of --parent-mirror-bootstrap.

       --mirror-bootstrap URL
           sets the location of the debian package mirror that should be used  to  bootstrap  the
           derivative  from. This defaults to http://ftp.de.debian.org/debian/ which may not be a
           good default if you live outside of Europe.

       --mirror-chroot URL
           sets the location of the debian package mirror that will be used to fetch the packages
           of  the  derivative  in order to build the live system. By default, this is set to the
           value of --mirror-bootstrap.

       --mirror-chroot-security URL
           sets the location of the debian security package mirror that will be used to fetch the
           packages  of the derivative in order to build the live system. By default, this points
           to http://security.debian.org/debian/.

       --mirror-chroot-volatile URL
           sets the location of the debian volatile package mirror that will  be  used  to  fetch
           packages  of the derivative in order to build the live system. By default, this is set
           to the value of --mirror-chroot.

       --mirror-chroot-backports URL
           sets the location of the debian backports package mirror that will be  used  to  fetch
           packages  of the derivative in order to build the live system. By default, this points
           to http://backports.debian.org/debian-backports/.

       --mirror-binary URL
           sets the location of the derivative package mirror that should end  up  configured  in
           the  final  image  and  which  is  the  one  a  user  would  see and use. This has not
           necessarily to be the same that is used to build the image, e.g. if you  use  a  local
           mirror but want to have an official mirror in the image.

       --mirror-binary-security URL
           sets  the  location  of  the  derivatives  security  package mirror that should end up
           configured in the final image.

       --mirror-binary-volatile URL
           sets the location of the derivatives  volatile  package  mirror  that  should  end  up
           configured in the final image.

       --mirror-binary-backports URL
           sets  the  location  of  the  derivatives  backports package mirror that should end up
           configured in the final image.

       --mirror-debian-installer URL
           sets the location of the mirror that will be used to fetch the debian installer images
           of  the  derivative. By default, this points to the same mirror used to build the live
           system, i.e. the value of --mirror-bootstrap.

       --mode debian|emdebian|progress|ubuntu
           defines a global mode to load project specific defaults. By default  this  is  set  to
           debian.

       --system live|normal
           defines  if  the  resulting  system  image  should a live system or a normal, non-live
           system.

       --net-root-filesystem nfs|cfs
           defines the filesystem that will be configured in  the  bootloader  configuration  for
           your netboot image. This defaults to nfs.

       --net-root-mountoptions OPTIONS
           sets  additional  options for mounting the root filesystem in netboot images and is by
           default empty.

       --net-root-path PATH
           sets the file path that will be configured in the bootloader  configuration  for  your
           netboot  image.  This defaults to /srv/debian-live in debian mode and to /srv/emebian-
           live when being in emdebian mode, and /srv/ubuntu-live when in ubuntu mode.

       --net-root-server IP|HOSTNAME
           sets the IP or hostname that will be configured in the  bootloader  configuration  for
           the root filesystem of your netboot image. This defaults to 192.168.1.1.

       --net-cow-filesystem nfs|cfs
           defines the filesystem type for the copy-on-write layer and defaults to nfs.

       --net-cow-mountoptions OPTIONS
           sets  additional options for mounting the copy-on-write layer in netboot images and is
           by default empty.

       --net-cow-path PATH
           defines the path to client writable filesystem. Anywhere  that  client_mac_address  is
           specified  in  the  path  live-boot  will  substitute  the  MAC  address of the client
           delimited with hyphens.

           Example:
           /export/hosts/client_mac_address
           /export/hosts/00-16-D3-33-92-E8

       --net-cow-server IP|HOSTNAME
           sets the IP or hostname that will be configured in the  bootloader  configuration  for
           the copy-on-write filesystem of your netboot image and is by default empty.

       --net-tarball true|false
           defines  if a compressed tarball should be created. Disabling this options leads to no
           tarball at all, the plain binary directory is considered  the  output  in  this  case.
           Default is true.

       -p|--package-lists LIST|"LISTS"
           defines  which  lists available in /usr/share/live/build/package-lists should be used.
           By default, this is set to standard. Note that in case you have local  package  lists,
           you  don't  need  to  list them here. Putting them into config/package-lists is enough
           (the filename needs to have the .list suffix though).

       --quiet
           reduces the verbosity of messages output by lb build.

       --archives ARCHIVE|"ARCHIVES"
           enables    one    of    available    third-party     archive     configurations     in
           /usr/share/live/build/archives.

       --root-command sudo
           controls  if  live-build should use sudo internally to build the live image. Note that
           this is not well tested and that you should, when relying on sudo, call the individual
           live-build command with sudo itself.

       --use-fakeroot true|false
           controls  if  live-build  should  utilize  fakeroot  and  fakechroot  to try and avoid
           requiring root privillages where possible. By default, this option is false.

       --archive-areas ARCHIVE_AREA|"ARCHIVE_AREAS"
           defines which package archive areas of a debian packages archive should  be  used  for
           configured  debian package mirrors. By default, this is set to main. Remember to check
           the licenses of each  packages  with  respect  to  their  redistributability  in  your
           juristiction when enabling contrib or non-free with this mechanism.

       --parent-archive-areas PARENT_ARCHIVE_AREA|"PARENT_ARCHIVE_AREAS"
           defines the archive areas for derivatives of the resulting live system.

       --security true|false
           defines  if  the security repositories specified in the security mirror options should
           be used or not.

       --source true|false
           defines if a corresponding source image to  the  binary  image  should  be  build.  By
           default  this  is  false  because most people do not require this and would require to
           download quite a few source packages. However, once you start distributing  your  live
           image, you should make sure you build it with a source image alongside.

       -s|--source-images iso|netboot|tar|hdd
           defines the image type for the source image. Default is tar.

       --firmware-binary true|false
           defines if firmware packages should be automatically included into the binary pool for
           debian-installer. Note that only firmware packages  available  within  the  configured
           archive  areas  are  included,  e.g.  an  image  with packages from main only will not
           automatically include firmware from non-free. This  option  does  not  interfere  with
           explicitly listed packages in binary package lists.

       --firmware-chroot true|false
           defines  if  firmware  packages  should be automatically included into the live image.
           Note that only firmware packages available within the  configured  archive  areas  are
           included,  e.g.  an  image with packages from main only will not automatically include
           firmware from non-free. This option does not interfere with explicitly listed packages
           in chroot package lists.

       --swap-file-path PATH
           defines  the  path  to  a  swap  file to create in the binary image. Default is not to
           create a swap file.

       --swap-file-size MB
           defines what size in megabytes the swap file should be,  if  one  is  to  be  created.
           Default is 512MB.

       --syslinux-theme THEME_SUFFIX
           defines  the  syslinux  theme  to  use. The theme suffix is the name of a directory in
           /usr/share/syslinux/themes/ provided by  a  package  named  syslinux-theme-  plus  the
           suffix. In debian mode, this defaults to debian-squeeze.

       --tasksel apt|aptitude|tasksel
           selects which program is used to install tasks. By default, this is set to tasksel.

       --templates PATH
           sets  the path to the templates that live-build is going to use, e.g. for bootloaders.
           By default, this is set to /usr/share/live/build/templates/.

       --hdd-size MB
           defines what size the hdd image should be. Note that although the default  is  set  to
           10000  (= 10GB), it will not need 10GB space on your harddisk as the files are created
           as sparse files.

       --volatile true|false
           defines if debian volatile package archives should be included in the image or not.

       --backports true|false
           defines if debian backports package archives should be included in the image or not.

       --exposed-root true|false
           defines whether to expose the root filesystem as read only  and  not  covered  by  the
           union  filesystem.  This has useful implications for certain speciality setups such as
           LTSP. By default, this option is false.

       --verbose
           increases the verbosity of messages output by lb build.

       --win32-loader true|false
           defines if win32-loader should be included in the binary image or not.

ENVIRONMENT

       Currently,  command  line  switches  can  also  be  specified  through  the  corresponding
       environment  variable.  However,  this  generally  should  not be relied upon, as it is an
       implementation detail that is subject to change in future releases. For  options  applying
       directly   to   live-build,   environment   variables  are  named  LB_FOO,  meaning,  e.g.
       --apt-ftp-proxy becomes LB_APT_FTP_PROXY (the exception being  internal  options  such  as
       --debug). For options passed to another program, as in APT_OPTIONS or GZIP_OPTIONS, no LB_
       prefix is used.

FILES

       auto/config

       /etc/live/build.conf, /etc/live/build.d
           An optional, global configuration file for  lb  config  variables.  It  is  useful  to
           specify  a few system wide defaults, like LB_PARENT_MIRROR_BOOTSTRAP. This feature can
           be false by specifying the --ignore-system-defaults option.

SEE ALSO

       live-build(7)

       live-boot(7)

       live-config(7)

       This program is a part of live-build.

HOMEPAGE

       More information about live-build and the Debian Live project can be found on the homepage
       at <http://live.debian.net/> and in the manual at <http://live.debian.net/manual/>.

BUGS

       Bugs  can  be  reported by submitting a bugreport for the live-build package in the Debian
       Bug Tracking System at <http://bugs.debian.org/> or by writing a mail to the  Debian  Live
       mailing list at <debian-live@lists.debian.org>.

AUTHOR

       live-build was written by Daniel Baumann <daniel@debian.org> for the Debian project.