Provided by: perltidy_20140328-1_all 
NAME
perltidy - a perl script indenter and reformatter
SYNOPSIS
perltidy [ options ] file1 file2 file3 ...
(output goes to file1.tdy, file2.tdy, file3.tdy, ...)
perltidy [ options ] file1 -o outfile
perltidy [ options ] file1 -st >outfile
perltidy [ options ] <infile >outfile
DESCRIPTION
Perltidy reads a perl script and writes an indented, reformatted script.
Many users will find enough information in "EXAMPLES" to get started. New users may
benefit from the short tutorial which can be found at
http://perltidy.sourceforge.net/tutorial.html
A convenient aid to systematically defining a set of style parameters can be found at
http://perltidy.sourceforge.net/stylekey.html
Perltidy can produce output on either of two modes, depending on the existence of an -html
flag. Without this flag, the output is passed through a formatter. The default
formatting tries to follow the recommendations in perlstyle(1), but it can be controlled
in detail with numerous input parameters, which are described in "FORMATTING OPTIONS".
When the -html flag is given, the output is passed through an HTML formatter which is
described in "HTML OPTIONS".
EXAMPLES
perltidy somefile.pl
This will produce a file somefile.pl.tdy containing the script reformatted using the
default options, which approximate the style suggested in perlstyle(1). The source file
somefile.pl is unchanged.
perltidy *.pl
Execute perltidy on all .pl files in the current directory with the default options. The
output will be in files with an appended .tdy extension. For any file with an error,
there will be a file with extension .ERR.
perltidy -b file1.pl file2.pl
Modify file1.pl and file2.pl in place, and backup the originals to file1.pl.bak and
file2.pl.bak. If file1.pl.bak and/or file2.pl.bak already exist, they will be
overwritten.
perltidy -b -bext='/' file1.pl file2.pl
Same as the previous example except that the backup files file1.pl.bak and file2.pl.bak
will be deleted if there are no errors.
perltidy -gnu somefile.pl
Execute perltidy on file somefile.pl with a style which approximates the GNU Coding
Standards for C programs. The output will be somefile.pl.tdy.
perltidy -i=3 somefile.pl
Execute perltidy on file somefile.pl, with 3 columns for each level of indentation (-i=3)
instead of the default 4 columns. There will not be any tabs in the reformatted script,
except for any which already exist in comments, pod documents, quotes, and here documents.
Output will be somefile.pl.tdy.
perltidy -i=3 -et=8 somefile.pl
Same as the previous example, except that leading whitespace will be entabbed with one tab
character per 8 spaces.
perltidy -ce -l=72 somefile.pl
Execute perltidy on file somefile.pl with all defaults except use "cuddled elses" (-ce)
and a maximum line length of 72 columns (-l=72) instead of the default 80 columns.
perltidy -g somefile.pl
Execute perltidy on file somefile.pl and save a log file somefile.pl.LOG which shows the
nesting of braces, parentheses, and square brackets at the start of every line.
perltidy -html somefile.pl
This will produce a file somefile.pl.html containing the script with html markup. The
output file will contain an embedded style sheet in the <HEAD> section which may be edited
to change the appearance.
perltidy -html -css=mystyle.css somefile.pl
This will produce a file somefile.pl.html containing the script with html markup. This
output file will contain a link to a separate style sheet file mystyle.css. If the file
mystyle.css does not exist, it will be created. If it exists, it will not be overwritten.
perltidy -html -pre somefile.pl
Write an html snippet with only the PRE section to somefile.pl.html. This is useful when
code snippets are being formatted for inclusion in a larger web page. No style sheet will
be written in this case.
perltidy -html -ss >mystyle.css
Write a style sheet to mystyle.css and exit.
perltidy -html -frm mymodule.pm
Write html with a frame holding a table of contents and the source code. The output files
will be mymodule.pm.html (the frame), mymodule.pm.toc.html (the table of contents), and
mymodule.pm.src.html (the source code).
OPTIONS - OVERVIEW
The entire command line is scanned for options, and they are processed before any files
are processed. As a result, it does not matter whether flags are before or after any
filenames. However, the relative order of parameters is important, with later parameters
overriding the values of earlier parameters.
For each parameter, there is a long name and a short name. The short names are convenient
for keyboard input, while the long names are self-documenting and therefore useful in
scripts. It is customary to use two leading dashes for long names, but one may be used.
Most parameters which serve as on/off flags can be negated with a leading "n" (for the
short name) or a leading "no" or "no-" (for the long name). For example, the flag to
outdent long quotes is -olq or --outdent-long-quotes. The flag to skip this is -nolq or
--nooutdent-long-quotes or --no-outdent-long-quotes.
Options may not be bundled together. In other words, options -q and -g may NOT be entered
as -qg.
Option names may be terminated early as long as they are uniquely identified. For
example, instead of --dump-token-types, it would be sufficient to enter --dump-tok, or
even --dump-t, to uniquely identify this command.
I/O control
The following parameters concern the files which are read and written.
-h, --help
Show summary of usage and exit.
-o=filename, --outfile=filename
Name of the output file (only if a single input file is being processed). If no
output file is specified, and output is not redirected to the standard output (see
-st), the output will go to filename.tdy. [Note: - does not redirect to standard
output. Use -st instead.]
-st, --standard-output
Perltidy must be able to operate on an arbitrarily large number of files in a single
run, with each output being directed to a different output file. Obviously this would
conflict with outputting to the single standard output device, so a special flag, -st,
is required to request outputting to the standard output. For example,
perltidy somefile.pl -st >somefile.new.pl
This option may only be used if there is just a single input file. The default is
-nst or --nostandard-output.
-se, --standard-error-output
If perltidy detects an error when processing file somefile.pl, its default behavior is
to write error messages to file somefile.pl.ERR. Use -se to cause all error messages
to be sent to the standard error output stream instead. This directive may be negated
with -nse. Thus, you may place -se in a .perltidyrc and override it when desired with
-nse on the command line.
-oext=ext, --output-file-extension=ext
Change the extension of the output file to be ext instead of the default tdy (or html
in case the --html option is used). See "Specifying File Extensions".
-opath=path, --output-path=path
When perltidy creates a filename for an output file, by default it merely appends an
extension to the path and basename of the input file. This parameter causes the path
to be changed to path instead.
The path should end in a valid path separator character, but perltidy will try to add
one if it is missing.
For example
perltidy somefile.pl -opath=/tmp/
will produce /tmp/somefile.pl.tdy. Otherwise, somefile.pl.tdy will appear in whatever
directory contains somefile.pl.
If the path contains spaces, it should be placed in quotes.
This parameter will be ignored if output is being directed to standard output, or if
it is being specified explicitly with the -o=s parameter.
-b, --backup-and-modify-in-place
Modify the input file or files in-place and save the original with the extension .bak.
Any existing .bak file will be deleted. See next item for changing the default backup
extension, and for eliminating the backup file altogether.
A -b flag will be ignored if input is from standard input or goes to standard output,
or if the -html flag is set.
In particular, if you want to use both the -b flag and the -pbp
(--perl-best-practices) flag, then you must put a -nst flag after the -pbp flag
because it contains a -st flag as one of its components, which means that output will
go to the standard output stream.
-bext=ext, --backup-file-extension=ext
This parameter serves two purposes: (1) to change the extension of the backup file to
be something other than the default .bak, and (2) to indicate that no backup file
should be saved.
To change the default extension to something other than .bak see "Specifying File
Extensions".
A backup file of the source is always written, but you can request that it be deleted
at the end of processing if there were no errors. This is risky unless the source
code is being maintained with a source code control system.
To indicate that the backup should be deleted include one forward slash, /, in the
extension. If any text remains after the slash is removed it will be used to define
the backup file extension (which is always created and only deleted if there were no
errors).
Here are some examples:
Parameter Extension Backup File Treatment
<-bext=bak> F<.bak> Keep (same as the default behavior)
<-bext='/'> F<.bak> Delete if no errors
<-bext='/backup'> F<.backup> Delete if no errors
<-bext='original/'> F<.original> Delete if no errors
-w, --warning-output
Setting -w causes any non-critical warning messages to be reported as errors. These
include messages about possible pod problems, possibly bad starting indentation level,
and cautions about indirect object usage. The default, -nw or --nowarning-output, is
not to include these warnings.
-q, --quiet
Deactivate error messages and syntax checking (for running under an editor).
For example, if you use a vi-style editor, such as vim, you may execute perltidy as a
filter from within the editor using something like
:n1,n2!perltidy -q
where "n1,n2" represents the selected text. Without the -q flag, any error message
may mess up your screen, so be prepared to use your "undo" key.
-log, --logfile
Save the .LOG file, which has many useful diagnostics. Perltidy always creates a .LOG
file, but by default it is deleted unless a program bug is suspected. Setting the
-log flag forces the log file to be saved.
-g=n, --logfile-gap=n
Set maximum interval between input code lines in the logfile. This purpose of this
flag is to assist in debugging nesting errors. The value of "n" is optional. If you
set the flag -g without the value of "n", it will be taken to be 1, meaning that every
line will be written to the log file. This can be helpful if you are looking for a
brace, paren, or bracket nesting error.
Setting -g also causes the logfile to be saved, so it is not necessary to also include
-log.
If no -g flag is given, a value of 50 will be used, meaning that at least every 50th
line will be recorded in the logfile. This helps prevent excessively long log files.
Setting a negative value of "n" is the same as not setting -g at all.
-npro --noprofile
Ignore any .perltidyrc command file. Normally, perltidy looks first in your current
directory for a .perltidyrc file of parameters. (The format is described below). If
it finds one, it applies those options to the initial default values, and then it
applies any that have been defined on the command line. If no .perltidyrc file is
found, it looks for one in your home directory.
If you set the -npro flag, perltidy will not look for this file.
-pro=filename or --profile=filename
To simplify testing and switching .perltidyrc files, this command may be used to
specify a configuration file which will override the default name of .perltidyrc.
There must not be a space on either side of the '=' sign. For example, the line
perltidy -pro=testcfg
would cause file testcfg to be used instead of the default .perltidyrc.
A pathname begins with three dots, e.g. ".../.perltidyrc", indicates that the file
should be searched for starting in the current directory and working upwards. This
makes it easier to have multiple projects each with their own .perltidyrc in their
root directories.
-opt, --show-options
Write a list of all options used to the .LOG file. Please see --dump-options for a
simpler way to do this.
-f, --force-read-binary
Force perltidy to process binary files. To avoid producing excessive error messages,
perltidy skips files identified by the system as non-text. However, valid perl
scripts containing binary data may sometimes be identified as non-text, and this flag
forces perltidy to process them.
FORMATTING OPTIONS
Basic Options
--notidy
This flag disables all formatting and causes the input to be copied unchanged to the
output except for possible changes in line ending characters and any pre- and post-
filters. This can be useful in conjunction with a hierarchical set of .perltidyrc
files to avoid unwanted code tidying. See also "Skipping Selected Sections of Code"
for a way to avoid tidying specific sections of code.
-i=n, --indent-columns=n
Use n columns per indentation level (default n=4).
-l=n, --maximum-line-length=n
The default maximum line length is n=80 characters. Perltidy will try to find line
break points to keep lines below this length. However, long quotes and side comments
may cause lines to exceed this length. Setting -l=0 is equivalent to setting -l=(a
large number).
-vmll, --variable-maximum-line-length
A problem arises using a fixed maximum line length with very deeply nested code and
data structures because eventually the amount of leading whitespace used for
indicating indentation takes up most or all of the available line width, leaving
little or no space for the actual code or data. One solution is to use a vary long
line length. Another solution is to use the -vmll flag, which basically tells
perltidy to ignore leading whitespace when measuring the line length.
To be precise, when the -vmll parameter is set, the maximum line length of a line of
code will be M+L*I, where
M is the value of --maximum-line-length=M (-l=M), default 80,
I is the value of --indent-columns=I (-i=I), default 4,
L is the indentation level of the line of code
When this flag is set, the choice of breakpoints for a block of code should be
essentially independent of its nesting depth. However, the absolute line lengths,
including leading whitespace, can still be arbitrarily large. This problem can be
avoided by including the next parameter.
The default is not to do this (-nvmll).
-wc=n, --whitespace-cycle=n
This flag also addresses problems with very deeply nested code and data structures.
When the nesting depth exceeds the value n the leading whitespace will be reduced and
start at a depth of 1 again. The result is that blocks of code will shift back to the
left rather than moving arbitrarily far to the right. This occurs cyclically to any
depth.
For example if one level of indentation equals 4 spaces (-i=4, the default), and one
uses -wc=15, then if the leading whitespace on a line exceeds about 4*15=60 spaces it
will be reduced back to 4*1=4 spaces and continue increasing from there. If the
whitespace never exceeds this limit the formatting remains unchanged.
The combination of -vmll and -wc=n provides a solution to the problem of displaying
arbitrarily deep data structures and code in a finite window, although -wc=n may of
course be used without -vmll.
The default is not to use this, which can also be indicated using -wc=0.
tabs
Using tab characters will almost certainly lead to future portability and maintenance
problems, so the default and recommendation is not to use them. For those who prefer
tabs, however, there are two different options.
Except for possibly introducing tab indentation characters, as outlined below,
perltidy does not introduce any tab characters into your file, and it removes any tabs
from the code (unless requested not to do so with -fws). If you have any tabs in your
comments, quotes, or here-documents, they will remain.
-et=n, --entab-leading-whitespace
This flag causes each n initial space characters to be replaced by one tab
character. Note that the integer n is completely independent of the integer
specified for indentation parameter, -i=n.
-t, --tabs
This flag causes one leading tab character to be inserted for each level of
indentation. Certain other features are incompatible with this option, and if
these options are also given, then a warning message will be issued and this flag
will be unset. One example is the -lp option.
-dt=n, --default-tabsize=n
If the first line of code passed to perltidy contains leading tabs but no tab
scheme is specified for the output stream then perltidy must guess how many spaces
correspond to each leading tab. This number of spaces n corresponding to each
leading tab of the input stream may be specified with -dt=n. The default is n=8.
This flag has no effect if a tab scheme is specified for the output stream,
because then the input stream is assumed to use the same tab scheme and
indentation spaces as for the output stream (any other assumption would lead to
unstable editing).
-syn, --check-syntax
This flag causes perltidy to run "perl -c -T" to check syntax of input and output.
(To change the flags passed to perl, see the next item, -pscf). The results are
written to the .LOG file, which will be saved if an error is detected in the output
script. The output script is not checked if the input script has a syntax error.
Perltidy does its own checking, but this option employs perl to get a "second
opinion".
If perl reports errors in the input file, they will not be reported in the error
output unless the --warning-output flag is given.
The default is NOT to do this type of syntax checking (although perltidy will still do
as much self-checking as possible). The reason is that it causes all code in BEGIN
blocks to be executed, for all modules being used, and this opens the door to security
issues and infinite loops when running perltidy.
-pscf=s, -perl-syntax-check-flags=s
When perl is invoked to check syntax, the normal flags are "-c -T". In addition, if
the -x flag is given to perltidy, then perl will also be passed a -x flag. It should
not normally be necessary to change these flags, but it can be done with the -pscf=s
flag. For example, if the taint flag, "-T", is not wanted, the flag could be set to
be just -pscf=-c.
Perltidy will pass your string to perl with the exception that it will add a -c and -x
if appropriate. The .LOG file will show exactly what flags were passed to perl.
-io, --indent-only
This flag is used to deactivate all formatting and line break changes within non-blank
lines of code. When it is in effect, the only change to the script will be to the
indentation and blank lines. And any flags controlling whitespace and newlines will
be ignored. You might want to use this if you are perfectly happy with your
whitespace and line breaks, and merely want perltidy to handle the indentation. (This
also speeds up perltidy by well over a factor of two, so it might be useful when
perltidy is merely being used to help find a brace error in a large script).
Setting this flag is equivalent to setting --freeze-newlines and --freeze-whitespace.
If you also want to keep your existing blank lines exactly as they are, you can add
--freeze-blank-lines.
-ole=s, --output-line-ending=s
where s="win", "dos", "unix", or "mac". This flag tells perltidy to output line
endings for a specific system. Normally, perltidy writes files with the line
separator character of the host system. The "win" and "dos" flags have an identical
result.
-ple, --preserve-line-endings
This flag tells perltidy to write its output files with the same line endings as the
input file, if possible. It should work for dos, unix, and mac line endings. It will
only work if perltidy input comes from a filename (rather than stdin, for example).
If perltidy has trouble determining the input file line ending, it will revert to the
default behavior of using the line ending of the host system.
-it=n, --iterations=n
This flag causes perltidy to do n complete iterations. The reason for this flag is
that code beautification is an iterative process and in some cases the output from
perltidy can be different if it is applied a second time. For most purposes the
default of n=1 should be satisfactory. However n=2 can be useful when a major style
change is being made, or when code is being beautified on check-in to a source code
control system. It has been found to be extremely rare for the output to change after
2 iterations. If a value n is greater than 2 is input then a convergence test will be
used to stop the iterations as soon as possible, almost always after 2 iterations.
See the next item for a simplified iteration control.
This flag has no effect when perltidy is used to generate html.
-conv, --converge
This flag is equivalent to -it=4 and is included to simplify iteration control. For
all practical purposes one either does or does not want to be sure that the output is
converged, and there is no penalty to using a large iteration limit since perltidy
will check for convergence and stop iterating as soon as possible. The default is
-nconv (no convergence check). Using -conv will approximately double run time since
normally one extra iteration is required to verify convergence.
Code Indentation Control
-ci=n, --continuation-indentation=n
Continuation indentation is extra indentation spaces applied when a long line is
broken. The default is n=2, illustrated here:
my $level = # -ci=2
( $max_index_to_go >= 0 ) ? $levels_to_go[0] : $last_output_level;
The same example, with n=0, is a little harder to read:
my $level = # -ci=0
( $max_index_to_go >= 0 ) ? $levels_to_go[0] : $last_output_level;
The value given to -ci is also used by some commands when a small space is required.
Examples are commands for outdenting labels, -ola, and control keywords, -okw.
When default values are not used, it is suggested that the value n given with -ci=n be
no more than about one-half of the number of spaces assigned to a full indentation
level on the -i=n command.
-sil=n --starting-indentation-level=n
By default, perltidy examines the input file and tries to determine the starting
indentation level. While it is often zero, it may not be zero for a code snippet
being sent from an editing session.
To guess the starting indentation level perltidy simply assumes that indentation
scheme used to create the code snippet is the same as is being used for the current
perltidy process. This is the only sensible guess that can be made. It should be
correct if this is true, but otherwise it probably won't. For example, if the input
script was written with -i=2 and the current peltidy flags have -i=4, the wrong
initial indentation will be guessed for a code snippet which has non-zero initial
indentation. Likewise, if an entabbing scheme is used in the input script and not in
the current process then the guessed indentation will be wrong.
If the default method does not work correctly, or you want to change the starting
level, use -sil=n, to force the starting level to be n.
List indentation using -lp, --line-up-parentheses
By default, perltidy indents lists with 4 spaces, or whatever value is specified with
-i=n. Here is a small list formatted in this way:
# perltidy (default)
@month_of_year = (
'Jan', 'Feb', 'Mar', 'Apr', 'May', 'Jun',
'Jul', 'Aug', 'Sep', 'Oct', 'Nov', 'Dec'
);
Use the -lp flag to add extra indentation to cause the data to begin past the opening
parentheses of a sub call or list, or opening square bracket of an anonymous array, or
opening curly brace of an anonymous hash. With this option, the above list would
become:
# perltidy -lp
@month_of_year = (
'Jan', 'Feb', 'Mar', 'Apr', 'May', 'Jun',
'Jul', 'Aug', 'Sep', 'Oct', 'Nov', 'Dec'
);
If the available line length (see -l=n ) does not permit this much space, perltidy
will use less. For alternate placement of the closing paren, see the next section.
This option has no effect on code BLOCKS, such as if/then/else blocks, which always
use whatever is specified with -i=n. Also, the existence of line breaks and/or block
comments between the opening and closing parens may cause perltidy to temporarily
revert to its default method.
Note: The -lp option may not be used together with the -t tabs option. It may,
however, be used with the -et=n tab method.
In addition, any parameter which significantly restricts the ability of perltidy to
choose newlines will conflict with -lp and will cause -lp to be deactivated. These
include -io, -fnl, -nanl, and -ndnl. The reason is that the -lp indentation style can
require the careful coordination of an arbitrary number of break points in
hierarchical lists, and these flags may prevent that.
-cti=n, --closing-token-indentation
The -cti=n flag controls the indentation of a line beginning with a ")", "]", or a
non-block "}". Such a line receives:
-cti = 0 no extra indentation (default)
-cti = 1 extra indentation such that the closing token
aligns with its opening token.
-cti = 2 one extra indentation level if the line looks like:
); or ]; or };
-cti = 3 one extra indentation level always
The flags -cti=1 and -cti=2 work well with the -lp flag (previous section).
# perltidy -lp -cti=1
@month_of_year = (
'Jan', 'Feb', 'Mar', 'Apr', 'May', 'Jun',
'Jul', 'Aug', 'Sep', 'Oct', 'Nov', 'Dec'
);
# perltidy -lp -cti=2
@month_of_year = (
'Jan', 'Feb', 'Mar', 'Apr', 'May', 'Jun',
'Jul', 'Aug', 'Sep', 'Oct', 'Nov', 'Dec'
);
These flags are merely hints to the formatter and they may not always be followed. In
particular, if -lp is not being used, the indentation for cti=1 is constrained to be
no more than one indentation level.
If desired, this control can be applied independently to each of the closing container
token types. In fact, -cti=n is merely an abbreviation for -cpi=n -csbi=n -cbi=n,
where: -cpi or --closing-paren-indentation controls )'s, -csbi or
--closing-square-bracket-indentation controls ]'s, -cbi or --closing-brace-indentation
controls non-block }'s.
-icp, --indent-closing-paren
The -icp flag is equivalent to -cti=2, described in the previous section. The -nicp
flag is equivalent -cti=0. They are included for backwards compatibility.
-icb, --indent-closing-brace
The -icb option gives one extra level of indentation to a brace which terminates a
code block . For example,
if ($task) {
yyy();
} # -icb
else {
zzz();
}
The default is not to do this, indicated by -nicb.
-olq, --outdent-long-quotes
When -olq is set, lines which is a quoted string longer than the value maximum-line-
length will have their indentation removed to make them more readable. This is the
default. To prevent such out-denting, use -nolq or --nooutdent-long-lines.
-oll, --outdent-long-lines
This command is equivalent to --outdent-long-quotes and --outdent-long-comments, and
it is included for compatibility with previous versions of perltidy. The negation of
this also works, -noll or --nooutdent-long-lines, and is equivalent to setting -nolq
and -nolc.
Outdenting Labels: -ola, --outdent-labels
This command will cause labels to be outdented by 2 spaces (or whatever -ci has been
set to), if possible. This is the default. For example:
my $i;
LOOP: while ( $i = <FOTOS> ) {
chomp($i);
next unless $i;
fixit($i);
}
Use -nola to not outdent labels.
Outdenting Keywords
-okw, --outdent-keywords
The command -okw will cause certain leading control keywords to be outdented by 2
spaces (or whatever -ci has been set to), if possible. By default, these keywords
are "redo", "next", "last", "goto", and "return". The intention is to make these
control keywords easier to see. To change this list of keywords being outdented,
see the next section.
For example, using "perltidy -okw" on the previous example gives:
my $i;
LOOP: while ( $i = <FOTOS> ) {
chomp($i);
next unless $i;
fixit($i);
}
The default is not to do this.
Specifying Outdented Keywords: -okwl=string, --outdent-keyword-list=string
This command can be used to change the keywords which are outdented with the -okw
command. The parameter string is a required list of perl keywords, which should
be placed in quotes if there are more than one. By itself, it does not cause any
outdenting to occur, so the -okw command is still required.
For example, the commands "-okwl="next last redo goto" -okw" will cause those four
keywords to be outdented. It is probably simplest to place any -okwl command in a
.perltidyrc file.
Whitespace Control
Whitespace refers to the blank space between variables, operators, and other code tokens.
-fws, --freeze-whitespace
This flag causes your original whitespace to remain unchanged, and causes the rest of
the whitespace commands in this section, the Code Indentation section, and the Comment
Control section to be ignored.
Tightness of curly braces, parentheses, and square brackets.
Here the term "tightness" will mean the closeness with which pairs of enclosing
tokens, such as parentheses, contain the quantities within. A numerical value of 0,
1, or 2 defines the tightness, with 0 being least tight and 2 being most tight.
Spaces within containers are always symmetric, so if there is a space after a "(" then
there will be a space before the corresponding ")".
The -pt=n or --paren-tightness=n parameter controls the space within parens. The
example below shows the effect of the three possible values, 0, 1, and 2:
if ( ( my $len_tab = length( $tabstr ) ) > 0 ) { # -pt=0
if ( ( my $len_tab = length($tabstr) ) > 0 ) { # -pt=1 (default)
if ((my $len_tab = length($tabstr)) > 0) { # -pt=2
When n is 0, there is always a space to the right of a '(' and to the left of a ')'.
For n=2 there is never a space. For n=1, the default, there is a space unless the
quantity within the parens is a single token, such as an identifier or quoted string.
Likewise, the parameter -sbt=n or --square-bracket-tightness=n controls the space
within square brackets, as illustrated below.
$width = $col[ $j + $k ] - $col[ $j ]; # -sbt=0
$width = $col[ $j + $k ] - $col[$j]; # -sbt=1 (default)
$width = $col[$j + $k] - $col[$j]; # -sbt=2
Curly braces which do not contain code blocks are controlled by the parameter -bt=n or
--brace-tightness=n.
$obj->{ $parsed_sql->{ 'table' }[0] }; # -bt=0
$obj->{ $parsed_sql->{'table'}[0] }; # -bt=1 (default)
$obj->{$parsed_sql->{'table'}[0]}; # -bt=2
And finally, curly braces which contain blocks of code are controlled by the parameter
-bbt=n or --block-brace-tightness=n as illustrated in the example below.
%bf = map { $_ => -M $_ } grep { /\.deb$/ } dirents '.'; # -bbt=0 (default)
%bf = map { $_ => -M $_ } grep {/\.deb$/} dirents '.'; # -bbt=1
%bf = map {$_ => -M $_} grep {/\.deb$/} dirents '.'; # -bbt=2
To simplify input in the case that all of the tightness flags have the same value <n>,
the parameter <-act=n> or --all-containers-tightness=n is an abbreviation for the
combination <-pt=n -sbt=n -bt=n -bbt=n>.
-tso, --tight-secret-operators
The flag -tso causes certain perl token sequences (secret operators) which might be
considered to be a single operator to be formatted "tightly" (without spaces). The
operators currently modified by this flag are:
0+ +0 ()x!! ~~<> ,=> =( )=
For example the sequence 0 +, which converts a string to a number, would be formatted
without a space: 0+ when the -tso flag is set. This flag is off by default.
-sts, --space-terminal-semicolon
Some programmers prefer a space before all terminal semicolons. The default is for no
such space, and is indicated with -nsts or --nospace-terminal-semicolon.
$i = 1 ; # -sts
$i = 1; # -nsts (default)
-sfs, --space-for-semicolon
Semicolons within for loops may sometimes be hard to see, particularly when commas are
also present. This option places spaces on both sides of these special semicolons,
and is the default. Use -nsfs or --nospace-for-semicolon to deactivate it.
for ( @a = @$ap, $u = shift @a ; @a ; $u = $v ) { # -sfs (default)
for ( @a = @$ap, $u = shift @a; @a; $u = $v ) { # -nsfs
-asc, --add-semicolons
Setting -asc allows perltidy to add any missing optional semicolon at the end of a
line which is followed by a closing curly brace on the next line. This is the
default, and may be deactivated with -nasc or --noadd-semicolons.
-dsm, --delete-semicolons
Setting -dsm allows perltidy to delete extra semicolons which are simply empty
statements. This is the default, and may be deactivated with -ndsm or
--nodelete-semicolons. (Such semicolons are not deleted, however, if they would
promote a side comment to a block comment).
-aws, --add-whitespace
Setting this option allows perltidy to add certain whitespace improve code
readability. This is the default. If you do not want any whitespace added, but are
willing to have some whitespace deleted, use -naws. (Use -fws to leave whitespace
completely unchanged).
-dws, --delete-old-whitespace
Setting this option allows perltidy to remove some old whitespace between characters,
if necessary. This is the default. If you do not want any old whitespace removed,
use -ndws or --nodelete-old-whitespace.
Detailed whitespace controls around tokens
For those who want more detailed control over the whitespace around tokens, there are
four parameters which can directly modify the default whitespace rules built into
perltidy for any token. They are:
-wls=s or --want-left-space=s,
-nwls=s or --nowant-left-space=s,
-wrs=s or --want-right-space=s,
-nwrs=s or --nowant-right-space=s.
These parameters are each followed by a quoted string, s, containing a list of token
types. No more than one of each of these parameters should be specified, because
repeating a command-line parameter always overwrites the previous one before perltidy
ever sees it.
To illustrate how these are used, suppose it is desired that there be no space on
either side of the token types = + - / *. The following two parameters would specify
this desire:
-nwls="= + - / *" -nwrs="= + - / *"
(Note that the token types are in quotes, and that they are separated by spaces).
With these modified whitespace rules, the following line of math:
$root = -$b + sqrt( $b * $b - 4. * $a * $c ) / ( 2. * $a );
becomes this:
$root=-$b+sqrt( $b*$b-4.*$a*$c )/( 2.*$a );
These parameters should be considered to be hints to perltidy rather than fixed rules,
because perltidy must try to resolve conflicts that arise between them and all of the
other rules that it uses. One conflict that can arise is if, between two tokens, the
left token wants a space and the right one doesn't. In this case, the token not
wanting a space takes priority.
It is necessary to have a list of all token types in order to create this type of
input. Such a list can be obtained by the command --dump-token-types. Also try the
-D flag on a short snippet of code and look at the .DEBUG file to see the
tokenization.
WARNING Be sure to put these tokens in quotes to avoid having them misinterpreted by
your command shell.
Space between specific keywords and opening paren
When an opening paren follows a Perl keyword, no space is introduced after the
keyword, unless it is (by default) one of these:
my local our and or eq ne if else elsif until unless
while for foreach return switch case given when
These defaults can be modified with two commands:
-sak=s or --space-after-keyword=s adds keywords.
-nsak=s or --nospace-after-keyword=s removes keywords.
where s is a list of keywords (in quotes if necessary). For example,
my ( $a, $b, $c ) = @_; # default
my( $a, $b, $c ) = @_; # -nsak="my local our"
The abbreviation -nsak='*' is equivalent to including all of the keywords in the above
list.
When both -nsak=s and -sak=s commands are included, the -nsak=s command is executed
first. For example, to have space after only the keywords (my, local, our) you could
use -nsak="*" -sak="my local our".
To put a space after all keywords, see the next item.
Space between all keywords and opening parens
When an opening paren follows a function or keyword, no space is introduced after the
keyword except for the keywords noted in the previous item. To always put a space
between a function or keyword and its opening paren, use the command:
-skp or --space-keyword-paren
You will probably also want to use the flag -sfp (next item) too.
Space between all function names and opening parens
When an opening paren follows a function the default is not to introduce a space. To
cause a space to be introduced use:
-sfp or --space-function-paren
myfunc( $a, $b, $c ); # default
myfunc ( $a, $b, $c ); # -sfp
You will probably also want to use the flag -skp (previous item) too.
Trimming whitespace around "qw" quotes
-tqw or --trim-qw provide the default behavior of trimming spaces around multi-line
"qw" quotes and indenting them appropriately.
-ntqw or --notrim-qw cause leading and trailing whitespace around multi-line "qw"
quotes to be left unchanged. This option will not normally be necessary, but was
added for testing purposes, because in some versions of perl, trimming "qw" quotes
changes the syntax tree.
Trimming trailing whitespace from lines of POD
-trp or --trim-pod will remove trailing whitespace from lines of POD. The default is
not to do this.
Comment Controls
Perltidy has a number of ways to control the appearance of both block comments and side
comments. The term block comment here refers to a full-line comment, whereas side comment
will refer to a comment which appears on a line to the right of some code.
-ibc, --indent-block-comments
Block comments normally look best when they are indented to the same level as the code
which follows them. This is the default behavior, but you may use -nibc to keep block
comments left-justified. Here is an example:
# this comment is indented (-ibc, default)
if ($task) { yyy(); }
The alternative is -nibc:
# this comment is not indented (-nibc)
if ($task) { yyy(); }
See also the next item, -isbc, as well as -sbc, for other ways to have some indented
and some outdented block comments.
-isbc, --indent-spaced-block-comments
If there is no leading space on the line, then the comment will not be indented, and
otherwise it may be.
If both -ibc and -isbc are set, then -isbc takes priority.
-olc, --outdent-long-comments
When -olc is set, lines which are full-line (block) comments longer than the value
maximum-line-length will have their indentation removed. This is the default; use
-nolc to prevent outdenting.
-msc=n, --minimum-space-to-comment=n
Side comments look best when lined up several spaces to the right of code. Perltidy
will try to keep comments at least n spaces to the right. The default is n=4 spaces.
-fpsc=n, --fixed-position-side-comment=n
This parameter tells perltidy to line up side comments in column number n whenever
possible. The default, n=0, will not do this.
-iscl, --ignore-side-comment-lengths
This parameter causes perltidy to ignore the length of side comments when setting line
breaks. The default, -niscl, is to include the length of side comments when breaking
lines to stay within the length prescribed by the -l=n maximum line length parameter.
For example, the following long single line would remain intact with -l=80 and -iscl:
perltidy -l=80 -iscl
$vmsfile =~ s/;[\d\-]*$//; # Clip off version number; we can use a newer version as well
whereas without the -iscl flag the line will be broken:
perltidy -l=80
$vmsfile =~ s/;[\d\-]*$//
; # Clip off version number; we can use a newer version as well
-hsc, --hanging-side-comments
By default, perltidy tries to identify and align "hanging side comments", which are
something like this:
my $IGNORE = 0; # This is a side comment
# This is a hanging side comment
# And so is this
A comment is considered to be a hanging side comment if (1) it immediately follows a
line with a side comment, or another hanging side comment, and (2) there is some
leading whitespace on the line. To deactivate this feature, use -nhsc or
--nohanging-side-comments. If block comments are preceded by a blank line, or have no
leading whitespace, they will not be mistaken as hanging side comments.
Closing Side Comments
A closing side comment is a special comment which perltidy can automatically create
and place after the closing brace of a code block. They can be useful for code
maintenance and debugging. The command -csc (or --closing-side-comments) adds or
updates closing side comments. For example, here is a small code snippet
sub message {
if ( !defined( $_[0] ) ) {
print("Hello, World\n");
}
else {
print( $_[0], "\n" );
}
}
And here is the result of processing with "perltidy -csc":
sub message {
if ( !defined( $_[0] ) ) {
print("Hello, World\n");
}
else {
print( $_[0], "\n" );
}
} ## end sub message
A closing side comment was added for "sub message" in this case, but not for the "if"
and "else" blocks, because they were below the 6 line cutoff limit for adding closing
side comments. This limit may be changed with the -csci command, described below.
The command -dcsc (or --delete-closing-side-comments) reverses this process and
removes these comments.
Several commands are available to modify the behavior of these two basic commands,
-csc and -dcsc:
-csci=n, or --closing-side-comment-interval=n
where "n" is the minimum number of lines that a block must have in order for a
closing side comment to be added. The default value is "n=6". To illustrate:
# perltidy -csci=2 -csc
sub message {
if ( !defined( $_[0] ) ) {
print("Hello, World\n");
} ## end if ( !defined( $_[0] ))
else {
print( $_[0], "\n" );
} ## end else [ if ( !defined( $_[0] ))
} ## end sub message
Now the "if" and "else" blocks are commented. However, now this has become very
cluttered.
-cscp=string, or --closing-side-comment-prefix=string
where string is the prefix used before the name of the block type. The default
prefix, shown above, is "## end". This string will be added to closing side
comments, and it will also be used to recognize them in order to update, delete,
and format them. Any comment identified as a closing side comment will be placed
just a single space to the right of its closing brace.
-cscl=string, or --closing-side-comment-list-string
where "string" is a list of block types to be tagged with closing side comments.
By default, all code block types preceded by a keyword or label (such as "if",
"sub", and so on) will be tagged. The -cscl command changes the default list to
be any selected block types; see "Specifying Block Types". For example, the
following command requests that only "sub"'s, labels, "BEGIN", and "END" blocks be
affected by any -csc or -dcsc operation:
-cscl="sub : BEGIN END"
-csct=n, or --closing-side-comment-maximum-text=n
The text appended to certain block types, such as an "if" block, is whatever lies
between the keyword introducing the block, such as "if", and the opening brace.
Since this might be too much text for a side comment, there needs to be a limit,
and that is the purpose of this parameter. The default value is "n=20", meaning
that no additional tokens will be appended to this text after its length reaches
20 characters. Omitted text is indicated with "...". (Tokens, including sub
names, are never truncated, however, so actual lengths may exceed this). To
illustrate, in the above example, the appended text of the first block is " (
!defined( $_[0] )...". The existing limit of "n=20" caused this text to be
truncated, as indicated by the "...". See the next flag for additional control of
the abbreviated text.
-cscb, or --closing-side-comments-balanced
As discussed in the previous item, when the closing-side-comment-maximum-text
limit is exceeded the comment text must be truncated. Older versions of perltidy
terminated with three dots, and this can still be achieved with -ncscb:
perltidy -csc -ncscb
} ## end foreach my $foo (sort { $b cmp $a ...
However this causes a problem with editors which cannot recognize comments or are
not configured to do so because they cannot "bounce" around in the text correctly.
The -cscb flag has been added to help them by appending appropriate balancing
structure:
perltidy -csc -cscb
} ## end foreach my $foo (sort { $b cmp $a ... })
The default is -cscb.
-csce=n, or --closing-side-comment-else-flag=n
The default, n=0, places the text of the opening "if" statement after any terminal
"else".
If n=2 is used, then each "elsif" is also given the text of the opening "if"
statement. Also, an "else" will include the text of a preceding "elsif"
statement. Note that this may result some long closing side comments.
If n=1 is used, the results will be the same as n=2 whenever the resulting line
length is less than the maximum allowed. =item -cscb, or
--closing-side-comments-balanced
When using closing-side-comments, and the closing-side-comment-maximum-text limit
is exceeded, then the comment text must be abbreviated. It is terminated with
three dots if the -cscb flag is negated:
perltidy -csc -ncscb
} ## end foreach my $foo (sort { $b cmp $a ...
This causes a problem with older editors which do not recognize comments because
they cannot "bounce" around in the text correctly. The -cscb flag tries to help
them by appending appropriate terminal balancing structures:
perltidy -csc -cscb
} ## end foreach my $foo (sort { $b cmp $a ... })
The default is -cscb.
-cscw, or --closing-side-comment-warnings
This parameter is intended to help make the initial transition to the use of
closing side comments. It causes two things to happen if a closing side comment
replaces an existing, different closing side comment: first, an error message
will be issued, and second, the original side comment will be placed alone on a
new specially marked comment line for later attention.
The intent is to avoid clobbering existing hand-written side comments which happen
to match the pattern of closing side comments. This flag should only be needed on
the first run with -csc.
Important Notes on Closing Side Comments:
• Closing side comments are only placed on lines terminated with a closing brace.
Certain closing styles, such as the use of cuddled elses (-ce), preclude the
generation of some closing side comments.
• Please note that adding or deleting of closing side comments takes place only
through the commands -csc or -dcsc. The other commands, if used, merely modify
the behavior of these two commands.
• It is recommended that the -cscw flag be used along with -csc on the first use of
perltidy on a given file. This will prevent loss of any existing side comment
data which happens to have the csc prefix.
• Once you use -csc, you should continue to use it so that any closing side comments
remain correct as code changes. Otherwise, these comments will become incorrect
as the code is updated.
• If you edit the closing side comments generated by perltidy, you must also change
the prefix to be different from the closing side comment prefix. Otherwise, your
edits will be lost when you rerun perltidy with -csc. For example, you could
simply change "## end" to be "## End", since the test is case sensitive. You may
also want to use the -ssc flag to keep these modified closing side comments spaced
the same as actual closing side comments.
• Temporarily generating closing side comments is a useful technique for exploring
and/or debugging a perl script, especially one written by someone else. You can
always remove them with -dcsc.
Static Block Comments
Static block comments are block comments with a special leading pattern, "##" by
default, which will be treated slightly differently from other block comments. They
effectively behave as if they had glue along their left and top edges, because they
stick to the left edge and previous line when there is no blank spaces in those
places. This option is particularly useful for controlling how commented code is
displayed.
-sbc, --static-block-comments
When -sbc is used, a block comment with a special leading pattern, "##" by
default, will be treated specially.
Comments so identified are treated as follows:
• If there is no leading space on the line, then the comment will not be
indented, and otherwise it may be,
• no new blank line will be inserted before such a comment, and
• such a comment will never become a hanging side comment.
For example, assuming @month_of_year is left-adjusted:
@month_of_year = ( # -sbc (default)
'Jan', 'Feb', 'Mar', 'Apr', 'May', 'Jun', 'Jul', 'Aug', 'Sep', 'Oct',
## 'Dec', 'Nov'
'Nov', 'Dec');
Without this convention, the above code would become
@month_of_year = ( # -nsbc
'Jan', 'Feb', 'Mar', 'Apr', 'May', 'Jun', 'Jul', 'Aug', 'Sep', 'Oct',
## 'Dec', 'Nov'
'Nov', 'Dec'
);
which is not as clear. The default is to use -sbc. This may be deactivated with
-nsbc.
-sbcp=string, --static-block-comment-prefix=string
This parameter defines the prefix used to identify static block comments when the
-sbc parameter is set. The default prefix is "##", corresponding to "-sbcp=##".
The prefix is actually part of a perl pattern used to match lines and it must
either begin with "#" or "^#". In the first case a prefix ^\s* will be added to
match any leading whitespace, while in the second case the pattern will match only
comments with no leading whitespace. For example, to identify all comments as
static block comments, one would use "-sbcp=#". To identify all left-adjusted
comments as static block comments, use "-sbcp='^#'".
Please note that -sbcp merely defines the pattern used to identify static block
comments; it will not be used unless the switch -sbc is set. Also, please be
aware that since this string is used in a perl regular expression which identifies
these comments, it must enable a valid regular expression to be formed.
A pattern which can be useful is:
-sbcp=^#{2,}[^\s#]
This pattern requires a static block comment to have at least one character which
is neither a # nor a space. It allows a line containing only '#' characters to be
rejected as a static block comment. Such lines are often used at the start and
end of header information in subroutines and should not be separated from the
intervening comments, which typically begin with just a single '#'.
-osbc, --outdent-static-block-comments
The command -osbc will cause static block comments to be outdented by 2 spaces (or
whatever -ci=n has been set to), if possible.
Static Side Comments
Static side comments are side comments with a special leading pattern. This option
can be useful for controlling how commented code is displayed when it is a side
comment.
-ssc, --static-side-comments
When -ssc is used, a side comment with a static leading pattern, which is "##" by
default, will be spaced only a single space from previous character, and it will
not be vertically aligned with other side comments.
The default is -nssc.
-sscp=string, --static-side-comment-prefix=string
This parameter defines the prefix used to identify static side comments when the
-ssc parameter is set. The default prefix is "##", corresponding to "-sscp=##".
Please note that -sscp merely defines the pattern used to identify static side
comments; it will not be used unless the switch -ssc is set. Also, note that this
string is used in a perl regular expression which identifies these comments, so it
must enable a valid regular expression to be formed.
Skipping Selected Sections of Code
Selected lines of code may be passed verbatim to the output without any formatting. This
feature is enabled by default but can be disabled with the --noformat-skipping or -nfs
flag. It should be used sparingly to avoid littering code with markers, but it might be
helpful for working around occasional problems. For example it might be useful for
keeping the indentation of old commented code unchanged, keeping indentation of long
blocks of aligned comments unchanged, keeping certain list formatting unchanged, or
working around a glitch in perltidy.
-fs, --format-skipping
This flag, which is enabled by default, causes any code between special beginning and
ending comment markers to be passed to the output without formatting. The default
beginning marker is #<<< and the default ending marker is #>>> but they may be changed
(see next items below). Additional text may appear on these special comment lines
provided that it is separated from the marker by at least one space. For example
#<<< do not let perltidy touch this
my @list = (1,
1, 1,
1, 2, 1,
1, 3, 3, 1,
1, 4, 6, 4, 1,);
#>>>
The comment markers may be placed at any location that a block comment may appear. If
they do not appear to be working, use the -log flag and examine the .LOG file. Use
-nfs to disable this feature.
-fsb=string, --format-skipping-begin=string
The -fsb=string parameter may be used to change the beginning marker for format
skipping. The default is equivalent to -fsb='#<<<'. The string that you enter must
begin with a # and should be in quotes as necessary to get past the command shell of
your system. It is actually the leading text of a pattern that is constructed by
appending a '\s', so you must also include backslashes for characters to be taken
literally rather than as patterns.
Some examples show how example strings become patterns:
-fsb='#\{\{\{' becomes /^#\{\{\{\s/ which matches #{{{ but not #{{{{
-fsb='#\*\*' becomes /^#\*\*\s/ which matches #** but not #***
-fsb='#\*{2,}' becomes /^#\*{2,}\s/ which matches #** and #*****
-fse=string, --format-skipping-end=string
The -fsb=string is the corresponding parameter used to change the ending marker for
format skipping. The default is equivalent to -fse='#<<<'.
Line Break Control
The parameters in this section control breaks after non-blank lines of code. Blank lines
are controlled separately by parameters in the section "Blank Line Control".
-fnl, --freeze-newlines
If you do not want any changes to the line breaks within lines of code in your script,
set -fnl, and they will remain fixed, and the rest of the commands in this section and
sections "Controlling List Formatting", "Retaining or Ignoring Existing Line Breaks".
You may want to use -noll with this.
Note: If you also want to keep your blank lines exactly as they are, you can use the
-fbl flag which is described in the section "Blank Line Control".
-ce, --cuddled-else
Enable the "cuddled else" style, in which "else" and "elsif" are follow immediately
after the curly brace closing the previous block. The default is not to use cuddled
elses, and is indicated with the flag -nce or --nocuddled-else. Here is a comparison
of the alternatives:
if ($task) {
yyy();
} else { # -ce
zzz();
}
if ($task) {
yyy();
}
else { # -nce (default)
zzz();
}
-bl, --opening-brace-on-new-line
Use the flag -bl to place the opening brace on a new line:
if ( $input_file eq '-' ) # -bl
{
important_function();
}
This flag applies to all structural blocks, including named sub's (unless the -sbl
flag is set -- see next item).
The default style, -nbl, places an opening brace on the same line as the keyword
introducing it. For example,
if ( $input_file eq '-' ) { # -nbl (default)
-sbl, --opening-sub-brace-on-new-line
The flag -sbl can be used to override the value of -bl for the opening braces of named
sub's. For example,
perltidy -sbl
produces this result:
sub message
{
if (!defined($_[0])) {
print("Hello, World\n");
}
else {
print($_[0], "\n");
}
}
This flag is negated with -nsbl. If -sbl is not specified, the value of -bl is used.
-asbl, --opening-anonymous-sub-brace-on-new-line
The flag -asbl is like the -sbl flag except that it applies to anonymous sub's instead
of named subs. For example
perltidy -asbl
produces this result:
$a = sub
{
if ( !defined( $_[0] ) ) {
print("Hello, World\n");
}
else {
print( $_[0], "\n" );
}
};
This flag is negated with -nasbl, and the default is -nasbl.
-bli, --brace-left-and-indent
The flag -bli is the same as -bl but in addition it causes one unit of continuation
indentation ( see -ci ) to be placed before an opening and closing block braces.
For example,
if ( $input_file eq '-' ) # -bli
{
important_function();
}
By default, this extra indentation occurs for blocks of type: if, elsif, else, unless,
for, foreach, sub, while, until, and also with a preceding label. The next item shows
how to change this.
-blil=s, --brace-left-and-indent-list=s
Use this parameter to change the types of block braces for which the -bli flag
applies; see "Specifying Block Types". For example, -blil='if elsif else' would apply
it to only "if/elsif/else" blocks.
-bar, --opening-brace-always-on-right
The default style, -nbl places the opening code block brace on a new line if it does
not fit on the same line as the opening keyword, like this:
if ( $bigwasteofspace1 && $bigwasteofspace2
|| $bigwasteofspace3 && $bigwasteofspace4 )
{
big_waste_of_time();
}
To force the opening brace to always be on the right, use the -bar flag. In this
case, the above example becomes
if ( $bigwasteofspace1 && $bigwasteofspace2
|| $bigwasteofspace3 && $bigwasteofspace4 ) {
big_waste_of_time();
}
A conflict occurs if both -bl and -bar are specified.
-otr, --opening-token-right and related flags
The -otr flag is a hint that perltidy should not place a break between a comma and an
opening token. For example:
# default formatting
push @{ $self->{$module}{$key} },
{
accno => $ref->{accno},
description => $ref->{description}
};
# perltidy -otr
push @{ $self->{$module}{$key} }, {
accno => $ref->{accno},
description => $ref->{description}
};
The flag -otr is actually an abbreviation for three other flags which can be used to
control parens, hash braces, and square brackets separately if desired:
-opr or --opening-paren-right
-ohbr or --opening-hash-brace-right
-osbr or --opening-square-bracket-right
Vertical tightness of non-block curly braces, parentheses, and square brackets.
These parameters control what shall be called vertical tightness. Here are the main
points:
• Opening tokens (except for block braces) are controlled by -vt=n, or
--vertical-tightness=n, where
-vt=0 always break a line after opening token (default).
-vt=1 do not break unless this would produce more than one
step in indentation in a line.
-vt=2 never break a line after opening token
• You must also use the -lp flag when you use the -vt flag; the reason is explained
below.
• Closing tokens (except for block braces) are controlled by -vtc=n, or
--vertical-tightness-closing=n, where
-vtc=0 always break a line before a closing token (default),
-vtc=1 do not break before a closing token which is followed
by a semicolon or another closing token, and is not in
a list environment.
-vtc=2 never break before a closing token.
The rules for -vtc=1 are designed to maintain a reasonable balance between
tightness and readability in complex lists.
• Different controls may be applied to different token types, and it is also
possible to control block braces; see below.
• Finally, please note that these vertical tightness flags are merely hints to the
formatter, and it cannot always follow them. Things which make it difficult or
impossible include comments, blank lines, blocks of code within a list, and
possibly the lack of the -lp parameter. Also, these flags may be ignored for very
small lists (2 or 3 lines in length).
Here are some examples:
# perltidy -lp -vt=0 -vtc=0
%romanNumerals = (
one => 'I',
two => 'II',
three => 'III',
four => 'IV',
);
# perltidy -lp -vt=1 -vtc=0
%romanNumerals = ( one => 'I',
two => 'II',
three => 'III',
four => 'IV',
);
# perltidy -lp -vt=1 -vtc=1
%romanNumerals = ( one => 'I',
two => 'II',
three => 'III',
four => 'IV', );
The difference between -vt=1 and -vt=2 is shown here:
# perltidy -lp -vt=1
$init->add(
mysprintf( "(void)find_threadsv(%s);",
cstring( $threadsv_names[ $op->targ ] )
)
);
# perltidy -lp -vt=2
$init->add( mysprintf( "(void)find_threadsv(%s);",
cstring( $threadsv_names[ $op->targ ] )
)
);
With -vt=1, the line ending in "add(" does not combine with the next line because the
next line is not balanced. This can help with readability, but -vt=2 can be used to
ignore this rule.
The tightest, and least readable, code is produced with both "-vt=2" and "-vtc=2":
# perltidy -lp -vt=2 -vtc=2
$init->add( mysprintf( "(void)find_threadsv(%s);",
cstring( $threadsv_names[ $op->targ ] ) ) );
Notice how the code in all of these examples collapses vertically as -vt increases,
but the indentation remains unchanged. This is because perltidy implements the -vt
parameter by first formatting as if -vt=0, and then simply overwriting one output line
on top of the next, if possible, to achieve the desired vertical tightness. The -lp
indentation style has been designed to allow this vertical collapse to occur, which is
why it is required for the -vt parameter.
The -vt=n and -vtc=n parameters apply to each type of container token. If desired,
vertical tightness controls can be applied independently to each of the closing
container token types.
The parameters for controlling parentheses are -pvt=n or --paren-vertical-tightness=n,
and -pcvt=n or --paren-vertical-tightness-closing=n.
Likewise, the parameters for square brackets are -sbvt=n or
--square-bracket-vertical-tightness=n, and -sbcvt=n or
--square-bracket-vertical-tightness-closing=n.
Finally, the parameters for controlling non-code block braces are -bvt=n or
--brace-vertical-tightness=n, and -bcvt=n or --brace-vertical-tightness-closing=n.
In fact, the parameter -vt=n is actually just an abbreviation for -pvt=n -bvt=n
sbvt=n, and likewise -vtc=n is an abbreviation for -pvtc=n -bvtc=n sbvtc=n.
-bbvt=n or --block-brace-vertical-tightness=n
The -bbvt=n flag is just like the -vt=n flag but applies to opening code block braces.
-bbvt=0 break after opening block brace (default).
-bbvt=1 do not break unless this would produce more than one
step in indentation in a line.
-bbvt=2 do not break after opening block brace.
It is necessary to also use either -bl or -bli for this to work, because, as with
other vertical tightness controls, it is implemented by simply overwriting a line
ending with an opening block brace with the subsequent line. For example:
# perltidy -bli -bbvt=0
if ( open( FILE, "< $File" ) )
{
while ( $File = <FILE> )
{
$In .= $File;
$count++;
}
close(FILE);
}
# perltidy -bli -bbvt=1
if ( open( FILE, "< $File" ) )
{ while ( $File = <FILE> )
{ $In .= $File;
$count++;
}
close(FILE);
}
By default this applies to blocks associated with keywords if, elsif, else, unless,
for, foreach, sub, while, until, and also with a preceding label. This can be changed
with the parameter -bbvtl=string, or --block-brace-vertical-tightness-list=string,
where string is a space-separated list of block types. For more information on the
possible values of this string, see "Specifying Block Types"
For example, if we want to just apply this style to "if", "elsif", and "else" blocks,
we could use "perltidy -bli -bbvt=1 -bbvtl='if elsif else'".
There is no vertical tightness control for closing block braces; with one exception
they will be placed on separate lines. The exception is that a cascade of closing
block braces may be stacked on a single line. See -scbb.
-sot, --stack-opening-tokens and related flags
The -sot flag tells perltidy to "stack" opening tokens when possible to avoid lines
with isolated opening tokens.
For example:
# default
$opt_c = Text::CSV_XS->new(
{
binary => 1,
sep_char => $opt_c,
always_quote => 1,
}
);
# -sot
$opt_c = Text::CSV_XS->new( {
binary => 1,
sep_char => $opt_c,
always_quote => 1,
}
);
For detailed control of individual closing tokens the following controls can be used:
-sop or --stack-opening-paren
-sohb or --stack-opening-hash-brace
-sosb or --stack-opening-square-bracket
-sobb or --stack-opening-block-brace
The flag -sot is an abbreviation for -sop -sohb -sosb.
The flag -sobb is a abbreviation for -bbvt=2 -bbvtl='*'. This will case a cascade of
opening block braces to appear on a single line, although this an uncommon occurrence
except in test scripts.
-sct, --stack-closing-tokens and related flags
The -sct flag tells perltidy to "stack" closing tokens when possible to avoid lines
with isolated closing tokens.
For example:
# default
$opt_c = Text::CSV_XS->new(
{
binary => 1,
sep_char => $opt_c,
always_quote => 1,
}
);
# -sct
$opt_c = Text::CSV_XS->new(
{
binary => 1,
sep_char => $opt_c,
always_quote => 1,
} );
The -sct flag is somewhat similar to the -vtc flags, and in some cases it can give a
similar result. The difference is that the -vtc flags try to avoid lines with leading
opening tokens by "hiding" them at the end of a previous line, whereas the -sct flag
merely tries to reduce the number of lines with isolated closing tokens by stacking
them but does not try to hide them. For example:
# -vtc=2
$opt_c = Text::CSV_XS->new(
{
binary => 1,
sep_char => $opt_c,
always_quote => 1, } );
For detailed control of the stacking of individual closing tokens the following
controls can be used:
-scp or --stack-closing-paren
-schb or --stack-closing-hash-brace
-scsb or --stack-closing-square-bracket
-scbb or --stack-closing-block-brace
The flag -sct is an abbreviation for stacking the non-block closing tokens, -scp -schb
-scsb.
Stacking of closing block braces, -scbb, causes a cascade of isolated closing block
braces to be combined into a single line as in the following example:
# -scbb:
for $w1 (@w1) {
for $w2 (@w2) {
for $w3 (@w3) {
for $w4 (@w4) {
push( @lines, "$w1 $w2 $w3 $w4\n" );
} } } }
To simplify input even further for the case in which both opening and closing non-
block containers are stacked, the flag -sac or --stack-all-containers is an
abbreviation for -sot -sot.
-dnl, --delete-old-newlines
By default, perltidy first deletes all old line break locations, and then it looks for
good break points to match the desired line length. Use -ndnl or
--nodelete-old-newlines to force perltidy to retain all old line break points.
-anl, --add-newlines
By default, perltidy will add line breaks when necessary to create continuations of
long lines and to improve the script appearance. Use -nanl or --noadd-newlines to
prevent any new line breaks.
This flag does not prevent perltidy from eliminating existing line breaks; see
--freeze-newlines to completely prevent changes to line break points.
Controlling whether perltidy breaks before or after operators
Four command line parameters provide some control over whether a line break should be
before or after specific token types. Two parameters give detailed control:
-wba=s or --want-break-after=s, and
-wbb=s or --want-break-before=s.
These parameters are each followed by a quoted string, s, containing a list of token
types (separated only by spaces). No more than one of each of these parameters should
be specified, because repeating a command-line parameter always overwrites the
previous one before perltidy ever sees it.
By default, perltidy breaks after these token types:
% + - * / x != == >= <= =~ !~ < > | &
= **= += *= &= <<= &&= -= /= |= >>= ||= //= .= %= ^= x=
And perltidy breaks before these token types by default:
. << >> -> && || //
To illustrate, to cause a break after a concatenation operator, '.', rather than
before it, the command line would be
-wba="."
As another example, the following command would cause a break before math operators
'+', '-', '/', and '*':
-wbb="+ - / *"
These commands should work well for most of the token types that perltidy uses (use
--dump-token-types for a list). Also try the -D flag on a short snippet of code and
look at the .DEBUG file to see the tokenization. However, for a few token types there
may be conflicts with hardwired logic which cause unexpected results. One example is
curly braces, which should be controlled with the parameter bl provided for that
purpose.
WARNING Be sure to put these tokens in quotes to avoid having them misinterpreted by
your command shell.
Two additional parameters are available which, though they provide no further
capability, can simplify input are:
-baao or --break-after-all-operators,
-bbao or --break-before-all-operators.
The -baao sets the default to be to break after all of the following operators:
% + - * / x != == >= <= =~ !~ < > | &
= **= += *= &= <<= &&= -= /= |= >>= ||= //= .= %= ^= x=
. : ? && || and or err xor
and the -bbao flag sets the default to break before all of these operators. These can
be used to define an initial break preference which can be fine-tuned with the -wba
and -wbb flags. For example, to break before all operators except an = one could use
--bbao -wba='=' rather than listing every single perl operator except = on a -wbb
flag.
Controlling List Formatting
Perltidy attempts to place comma-separated arrays of values in tables which look good.
Its default algorithms usually work well, and they have been improving with each release,
but several parameters are available to control list formatting.
-boc, --break-at-old-comma-breakpoints
This flag tells perltidy to try to break at all old commas. This is not the default.
Normally, perltidy makes a best guess at list formatting, and seldom uses old comma
breakpoints. Usually this works well, but consider:
my @list = (1,
1, 1,
1, 2, 1,
1, 3, 3, 1,
1, 4, 6, 4, 1,);
The default formatting will flatten this down to one line:
# perltidy (default)
my @list = ( 1, 1, 1, 1, 2, 1, 1, 3, 3, 1, 1, 4, 6, 4, 1, );
which hides the structure. Using -boc, plus additional flags to retain the original
style, yields
# perltidy -boc -lp -pt=2 -vt=1 -vtc=1
my @list = (1,
1, 1,
1, 2, 1,
1, 3, 3, 1,
1, 4, 6, 4, 1,);
A disadvantage of this flag is that all tables in the file must already be nicely
formatted. For another possibility see the -fs flag in "Skipping Selected Sections of
Code".
-mft=n, --maximum-fields-per-table=n
If the computed number of fields for any table exceeds n, then it will be reduced to
n. The default value for n is a large number, 40. While this value should probably
be left unchanged as a general rule, it might be used on a small section of code to
force a list to have a particular number of fields per line, and then either the -boc
flag could be used to retain this formatting, or a single comment could be introduced
somewhere to freeze the formatting in future applications of perltidy.
# perltidy -mft=2
@month_of_year = (
'Jan', 'Feb',
'Mar', 'Apr',
'May', 'Jun',
'Jul', 'Aug',
'Sep', 'Oct',
'Nov', 'Dec'
);
-cab=n, --comma-arrow-breakpoints=n
A comma which follows a comma arrow, '=>', is given special consideration. In a long
list, it is common to break at all such commas. This parameter can be used to control
how perltidy breaks at these commas. (However, it will have no effect if old comma
breaks are being forced because -boc is used). The possible values of n are:
n=0 break at all commas after =>
n=1 stable: break at all commas after => if container is open,
EXCEPT FOR one-line containers
n=2 break at all commas after =>, BUT try to form the maximum
maximum one-line container lengths
n=3 do not treat commas after => specially at all
n=4 break everything: like n=0 but ALSO break a short container with
a => not followed by a comma when -vt=0 is used
n=5 stable: like n=1 but ALSO break at open one-line containers when
-vt=0 is used (default)
For example, given the following single line, perltidy by default will not add any
line breaks because it would break the existing one-line container:
bless { B => $B, Root => $Root } => $package;
Using -cab=0 will force a break after each comma-arrow item:
# perltidy -cab=0:
bless {
B => $B,
Root => $Root
} => $package;
If perltidy is subsequently run with this container broken, then by default it will
break after each '=>' because the container is now broken. To reform a one-line
container, the parameter -cab=2 could be used.
The flag -cab=3 can be used to prevent these commas from being treated specially. In
this case, an item such as "01" => 31 is treated as a single item in a table. The
number of fields in this table will be determined by the same rules that are used for
any other table. Here is an example.
# perltidy -cab=3
my %last_day = (
"01" => 31, "02" => 29, "03" => 31, "04" => 30,
"05" => 31, "06" => 30, "07" => 31, "08" => 31,
"09" => 30, "10" => 31, "11" => 30, "12" => 31
);
Retaining or Ignoring Existing Line Breaks
Several additional parameters are available for controlling the extent to which line
breaks in the input script influence the output script. In most cases, the default
parameter values are set so that, if a choice is possible, the output style follows the
input style. For example, if a short logical container is broken in the input script,
then the default behavior is for it to remain broken in the output script.
Most of the parameters in this section would only be required for a one-time conversion of
a script from short container lengths to longer container lengths. The opposite effect,
of converting long container lengths to shorter lengths, can be obtained by temporarily
using a short maximum line length.
-bol, --break-at-old-logical-breakpoints
By default, if a logical expression is broken at a "&&", "||", "and", or "or", then
the container will remain broken. Also, breaks at internal keywords "if" and "unless"
will normally be retained. To prevent this, and thus form longer lines, use -nbol.
-bok, --break-at-old-keyword-breakpoints
By default, perltidy will retain a breakpoint before keywords which may return lists,
such as "sort" and <map>. This allows chains of these operators to be displayed one
per line. Use -nbok to prevent retaining these breakpoints.
-bot, --break-at-old-ternary-breakpoints
By default, if a conditional (ternary) operator is broken at a ":", then it will
remain broken. To prevent this, and thereby form longer lines, use -nbot.
-boa, --break-at-old-attribute-breakpoints
By default, if an attribute list is broken at a ":" in the source file, then it will
remain broken. For example, given the following code, the line breaks at the ':'s
will be retained:
my @field
: field
: Default(1)
: Get('Name' => 'foo') : Set('Name');
If the attributes are on a single line in the source code then they will remain on a
single line if possible.
To prevent this, and thereby always form longer lines, use -nboa.
-iob, --ignore-old-breakpoints
Use this flag to tell perltidy to ignore existing line breaks to the maximum extent
possible. This will tend to produce the longest possible containers, regardless of
type, which do not exceed the line length limit.
-kis, --keep-interior-semicolons
Use the -kis flag to prevent breaking at a semicolon if there was no break there in
the input file. Normally perltidy places a newline after each semicolon which
terminates a statement unless several statements are contained within a one-line brace
block. To illustrate, consider the following input lines:
dbmclose(%verb_delim); undef %verb_delim;
dbmclose(%expanded); undef %expanded;
The default is to break after each statement, giving
dbmclose(%verb_delim);
undef %verb_delim;
dbmclose(%expanded);
undef %expanded;
With perltidy -kis the multiple statements are retained:
dbmclose(%verb_delim); undef %verb_delim;
dbmclose(%expanded); undef %expanded;
The statements are still subject to the specified value of maximum-line-length and
will be broken if this maximum is exceeded.
Blank Line Control
Blank lines can improve the readability of a script if they are carefully placed.
Perltidy has several commands for controlling the insertion, retention, and removal of
blank lines.
-fbl, --freeze-blank-lines
Set -fbl if you want to the blank lines in your script to remain exactly as they are.
The rest of the parameters in this section may then be ignored. (Note: setting the
-fbl flag is equivalent to setting -mbl=0 and -kbl=2).
-bbc, --blanks-before-comments
A blank line will be introduced before a full-line comment. This is the default. Use
-nbbc or --noblanks-before-comments to prevent such blank lines from being
introduced.
-blbs=n, --blank-lines-before-subs=n
The parameter -blbs=n requests that least n blank lines precede a sub definition which
does not follow a comment and which is more than one-line long. The default is
<-blbs=1>. BEGIN and END blocks are included.
The requested number of blanks statement will be inserted regardless of the value of
--maximum-consecutive-blank-lines=n (-mbl=n) with the exception that if -mbl=0 then no
blanks will be output.
This parameter interacts with the value k of the parameter
--maximum-consecutive-blank-lines=k (-mbl=k) as follows:
1. If -mbl=0 then no blanks will be output. This allows all blanks to be suppressed
with a single parameter. Otherwise,
2. If the number of old blank lines in the script is less than n then additional
blanks will be inserted to make the total n regardless of the value of -mbl=k.
3. If the number of old blank lines in the script equals or exceeds n then this
parameter has no effect, however the total will not exceed value specified on the
-mbl=k flag.
-blbp=n, --blank-lines-before-packages=n
The parameter -blbp=n requests that least n blank lines precede a package which does
not follow a comment. The default is <-blbp=1>.
This parameter interacts with the value k of the parameter
--maximum-consecutive-blank-lines=k (-mbl=k) in the same way as described for the
previous item -blbs=n.
-bbs, --blanks-before-subs
For compatibility with previous versions, -bbs or --blanks-before-subs is equivalent
to -blbp=1 and -blbs=1.
Likewise, -nbbs or --noblanks-before-subs is equivalent to -blbp=0 and -blbs=0.
-bbb, --blanks-before-blocks
A blank line will be introduced before blocks of coding delimited by for, foreach,
while, until, and if, unless, in the following circumstances:
• The block is not preceded by a comment.
• The block is not a one-line block.
• The number of consecutive non-blank lines at the current indentation depth is at
least -lbl (see next section).
This is the default. The intention of this option is to introduce some space within
dense coding. This is negated with -nbbb or --noblanks-before-blocks.
-lbl=n --long-block-line-count=n
This controls how often perltidy is allowed to add blank lines before certain block
types (see previous section). The default is 8. Entering a value of 0 is equivalent
to entering a very large number.
-mbl=n --maximum-consecutive-blank-lines=n
This parameter specifies the maximum number of consecutive blank lines which will be
output within code sections of a script. The default is n=1. If the input file has
more than n consecutive blank lines, the number will be reduced to n except as noted
above for the -blbp and -blbs parameters. If n=0 then no blank lines will be output
(unless all old blank lines are retained with the -kbl=2 flag of the next section).
This flag obviously does not apply to pod sections, here-documents, and quotes.
-kbl=n, --keep-old-blank-lines=n
The -kbl=n flag gives you control over how your existing blank lines are treated.
The possible values of n are:
n=0 ignore all old blank lines
n=1 stable: keep old blanks, but limited by the value of the B<-mbl=n> flag
n=2 keep all old blank lines, regardless of the value of the B<-mbl=n> flag
The default is n=1.
-sob, --swallow-optional-blank-lines
This is equivalent to kbl=0 and is included for compatibility with previous versions.
-nsob, --noswallow-optional-blank-lines
This is equivalent to kbl=1 and is included for compatibility with previous versions.
Styles
A style refers to a convenient collection of existing parameters.
-gnu, --gnu-style
-gnu gives an approximation to the GNU Coding Standards (which do not apply to perl)
as they are sometimes implemented. At present, this style overrides the default style
with the following parameters:
-lp -bl -noll -pt=2 -bt=2 -sbt=2 -icp
-pbp, --perl-best-practices
-pbp is an abbreviation for the parameters in the book Perl Best Practices by Damian
Conway:
-l=78 -i=4 -ci=4 -st -se -vt=2 -cti=0 -pt=1 -bt=1 -sbt=1 -bbt=1 -nsfs -nolq
-wbb="% + - * / x != == >= <= =~ !~ < > | & =
**= += *= &= <<= &&= -= /= |= >>= ||= //= .= %= ^= x="
Please note that this parameter set includes -st and -se flags, which make perltidy
act as a filter on one file only. These can be overridden by placing -nst and/or -nse
after the -pbp parameter.
Also note that the value of continuation indentation, -ci=4, is equal to the value of
the full indentation, -i=4. In some complex statements perltidy will produce nicer
results with -ci=2. This can be implemented by including -ci=2 after the -pbp
parameter. For example,
# perltidy -pbp
$self->{_text} = (
!$section ? ''
: $type eq 'item' ? "the $section entry"
: "the section on $section"
)
. (
$page
? ( $section ? ' in ' : '' ) . "the $page$page_ext manpage"
: ' elsewhere in this document'
);
# perltidy -pbp -ci=2
$self->{_text} = (
!$section ? ''
: $type eq 'item' ? "the $section entry"
: "the section on $section"
)
. (
$page
? ( $section ? ' in ' : '' ) . "the $page$page_ext manpage"
: ' elsewhere in this document'
);
Other Controls
Deleting selected text
Perltidy can selectively delete comments and/or pod documentation. The command -dac
or --delete-all-comments will delete all comments and all pod documentation, leaving
just code and any leading system control lines.
The command -dp or --delete-pod will remove all pod documentation (but not comments).
Two commands which remove comments (but not pod) are: -dbc or --delete-block-comments
and -dsc or --delete-side-comments. (Hanging side comments will be deleted with
block comments here.)
The negatives of these commands also work, and are the defaults. When block comments
are deleted, any leading 'hash-bang' will be retained. Also, if the -x flag is used,
any system commands before a leading hash-bang will be retained (even if they are in
the form of comments).
Writing selected text to a file
When perltidy writes a formatted text file, it has the ability to also send selected
text to a file with a .TEE extension. This text can include comments and pod
documentation.
The command -tac or --tee-all-comments will write all comments and all pod
documentation.
The command -tp or --tee-pod will write all pod documentation (but not comments).
The commands which write comments (but not pod) are: -tbc or --tee-block-comments and
-tsc or --tee-side-comments. (Hanging side comments will be written with block
comments here.)
The negatives of these commands also work, and are the defaults.
Using a .perltidyrc command file
If you use perltidy frequently, you probably won't be happy until you create a
.perltidyrc file to avoid typing commonly-used parameters. Perltidy will first look
in your current directory for a command file named .perltidyrc. If it does not find
one, it will continue looking for one in other standard locations.
These other locations are system-dependent, and may be displayed with the command
"perltidy -dpro". Under Unix systems, it will first look for an environment variable
PERLTIDY. Then it will look for a .perltidyrc file in the home directory, and then
for a system-wide file /usr/local/etc/perltidyrc, and then it will look for
/etc/perltidyrc. Note that these last two system-wide files do not have a leading
dot. Further system-dependent information will be found in the INSTALL file
distributed with perltidy.
Under Windows, perltidy will also search for a configuration file named perltidy.ini
since Windows does not allow files with a leading period (.). Use "perltidy -dpro" to
see the possible locations for your system. An example might be C:\Documents and
Settings\All Users\perltidy.ini.
Another option is the use of the PERLTIDY environment variable. The method for
setting environment variables depends upon the version of Windows that you are using.
Instructions for Windows 95 and later versions can be found here:
http://www.netmanage.com/000/20021101_005_tcm21-6336.pdf
Under Windows NT / 2000 / XP the PERLTIDY environment variable can be placed in either
the user section or the system section. The later makes the configuration file common
to all users on the machine. Be sure to enter the full path of the configuration file
in the value of the environment variable. Ex. PERLTIDY=C:\Documents and
Settings\perltidy.ini
The configuration file is free format, and simply a list of parameters, just as they
would be entered on a command line. Any number of lines may be used, with any number
of parameters per line, although it may be easiest to read with one parameter per
line. Comment text begins with a #, and there must also be a space before the # for
side comments. It is a good idea to put complex parameters in either single or double
quotes.
Here is an example of a .perltidyrc file:
# This is a simple of a .perltidyrc configuration file
# This implements a highly spaced style
-se # errors to standard error output
-w # show all warnings
-bl # braces on new lines
-pt=0 # parens not tight at all
-bt=0 # braces not tight
-sbt=0 # square brackets not tight
The parameters in the .perltidyrc file are installed first, so any parameters given on
the command line will have priority over them.
To avoid confusion, perltidy ignores any command in the .perltidyrc file which would
cause some kind of dump and an exit. These are:
-h -v -ddf -dln -dop -dsn -dtt -dwls -dwrs -ss
There are several options may be helpful in debugging a .perltidyrc file:
• A very helpful command is --dump-profile or -dpro. It writes a list of all
configuration filenames tested to standard output, and if a file is found, it
dumps the content to standard output before exiting. So, to find out where
perltidy looks for its configuration files, and which one if any it selects, just
enter
perltidy -dpro
• It may be simplest to develop and test configuration files with alternative names,
and invoke them with -pro=filename on the command line. Then rename the desired
file to .perltidyrc when finished.
• The parameters in the .perltidyrc file can be switched off with the -npro option.
• The commands --dump-options, --dump-defaults, --dump-long-names, and
--dump-short-names, all described below, may all be helpful.
Creating a new abbreviation
A special notation is available for use in a .perltidyrc file for creating an
abbreviation for a group of options. This can be used to create a shorthand for one
or more styles which are frequently, but not always, used. The notation is to group
the options within curly braces which are preceded by the name of the alias (without
leading dashes), like this:
newword {
-opt1
-opt2
}
where newword is the abbreviation, and opt1, etc, are existing parameters or other
abbreviations. The main syntax requirement is that the new abbreviation must begin on
a new line. Space before and after the curly braces is optional. For a specific
example, the following line
airy {-bl -pt=0 -bt=0 -sbt=0}
could be placed in a .perltidyrc file, and then invoked at will with
perltidy -airy somefile.pl
(Either "-airy" or "--airy" may be used).
Skipping leading non-perl commands with -x or --look-for-hash-bang
If your script has leading lines of system commands or other text which are not valid
perl code, and which are separated from the start of the perl code by a "hash-bang"
line, ( a line of the form "#!...perl" ), you must use the -x flag to tell perltidy
not to parse and format any lines before the "hash-bang" line. This option also
invokes perl with a -x flag when checking the syntax. This option was originally
added to allow perltidy to parse interactive VMS scripts, but it should be used for
any script which is normally invoked with "perl -x".
Making a file unreadable
The goal of perltidy is to improve the readability of files, but there are two
commands which have the opposite effect, --mangle and --extrude. They are actually
merely aliases for combinations of other parameters. Both of these strip all possible
whitespace, but leave comments and pod documents, so that they are essentially
reversible. The difference between these is that --mangle puts the fewest possible
line breaks in a script while --extrude puts the maximum possible. Note that these
options do not provided any meaningful obfuscation, because perltidy can be used to
reformat the files. They were originally developed to help test the tokenization
logic of perltidy, but they have other uses. One use for --mangle is the following:
perltidy --mangle myfile.pl -st | perltidy -o myfile.pl.new
This will form the maximum possible number of one-line blocks (see next section), and
can sometimes help clean up a badly formatted script.
A similar technique can be used with --extrude instead of --mangle to make the minimum
number of one-line blocks.
Another use for --mangle is to combine it with -dac to reduce the file size of a perl
script.
One-line blocks
There are a few points to note regarding one-line blocks. A one-line block is
something like this,
if ($x > 0) { $y = 1 / $x }
where the contents within the curly braces is short enough to fit on a single line.
With few exceptions, perltidy retains existing one-line blocks, if it is possible
within the line-length constraint, but it does not attempt to form new ones. In other
words, perltidy will try to follow the one-line block style of the input file.
If an existing one-line block is longer than the maximum line length, however, it will
be broken into multiple lines. When this happens, perltidy checks for and adds any
optional terminating semicolon (unless the -nasc option is used) if the block is a
code block.
The main exception is that perltidy will attempt to form new one-line blocks following
the keywords "map", "eval", and "sort", because these code blocks are often small and
most clearly displayed in a single line.
One-line block rules can conflict with the cuddled-else option. When the cuddled-else
option is used, perltidy retains existing one-line blocks, even if they do not obey
cuddled-else formatting.
Occasionally, when one-line blocks get broken because they exceed the available line
length, the formatting will violate the requested brace style. If this happens,
reformatting the script a second time should correct the problem.
Debugging
The following flags are available for debugging:
--dump-defaults or -ddf will write the default option set to standard output and quit
--dump-profile or -dpro will write the name of the current configuration file and its
contents to standard output and quit.
--dump-options or -dop will write current option set to standard output and quit.
--dump-long-names or -dln will write all command line long names (passed to
Get_options) to standard output and quit.
--dump-short-names or -dsn will write all command line short names to standard output
and quit.
--dump-token-types or -dtt will write a list of all token types to standard output
and quit.
--dump-want-left-space or -dwls will write the hash %want_left_space to standard
output and quit. See the section on controlling whitespace around tokens.
--dump-want-right-space or -dwrs will write the hash %want_right_space to standard
output and quit. See the section on controlling whitespace around tokens.
--no-memoize or -nmem will turn of memoizing. Memoization can reduce run time when
running perltidy repeatedly in a single process. It is on by default but can be
deactivated for testing with -nmem.
-DEBUG will write a file with extension .DEBUG for each input file showing the
tokenization of all lines of code.
Working with MakeMaker, AutoLoader and SelfLoader
The first $VERSION line of a file which might be eval'd by MakeMaker is passed through
unchanged except for indentation. Use --nopass-version-line, or -npvl, to deactivate
this feature.
If the AutoLoader module is used, perltidy will continue formatting code after seeing
an __END__ line. Use --nolook-for-autoloader, or -nlal, to deactivate this feature.
Likewise, if the SelfLoader module is used, perltidy will continue formatting code
after seeing a __DATA__ line. Use --nolook-for-selfloader, or -nlsl, to deactivate
this feature.
Working around problems with older version of Perl
Perltidy contains a number of rules which help avoid known subtleties and problems
with older versions of perl, and these rules always take priority over whatever
formatting flags have been set. For example, perltidy will usually avoid starting a
new line with a bareword, because this might cause problems if "use strict" is active.
There is no way to override these rules.
HTML OPTIONS
The -html master switch
The flag -html causes perltidy to write an html file with extension .html. So, for
example, the following command
perltidy -html somefile.pl
will produce a syntax-colored html file named somefile.pl.html which may be viewed
with a browser.
Please Note: In this case, perltidy does not do any formatting to the input file, and
it does not write a formatted file with extension .tdy. This means that two perltidy
runs are required to create a fully reformatted, html copy of a script.
The -pre flag for code snippets
When the -pre flag is given, only the pre-formatted section, within the <PRE> and
</PRE> tags, will be output. This simplifies inclusion of the output in other files.
The default is to output a complete web page.
The -nnn flag for line numbering
When the -nnn flag is given, the output lines will be numbered.
The -toc, or --html-table-of-contents flag
By default, a table of contents to packages and subroutines will be written at the
start of html output. Use -ntoc to prevent this. This might be useful, for example,
for a pod document which contains a number of unrelated code snippets. This flag only
influences the code table of contents; it has no effect on any table of contents
produced by pod2html (see next item).
The -pod, or --pod2html flag
There are two options for formatting pod documentation. The default is to pass the
pod through the Pod::Html module (which forms the basis of the pod2html utility). Any
code sections are formatted by perltidy, and the results then merged. Note: perltidy
creates a temporary file when Pod::Html is used; see "FILES". Also, Pod::Html creates
temporary files for its cache.
NOTE: Perltidy counts the number of "=cut" lines, and either moves the pod text to the
top of the html file if there is one "=cut", or leaves the pod text in its original
order (interleaved with code) otherwise.
Most of the flags accepted by pod2html may be included in the perltidy command line,
and they will be passed to pod2html. In some cases, the flags have a prefix "pod" to
emphasize that they are for the pod2html, and this prefix will be removed before they
are passed to pod2html. The flags which have the additional "pod" prefix are:
--[no]podheader --[no]podindex --[no]podrecurse --[no]podquiet
--[no]podverbose --podflush
The flags which are unchanged from their use in pod2html are:
--backlink=s --cachedir=s --htmlroot=s --libpods=s --title=s
--podpath=s --podroot=s
where 's' is an appropriate character string. Not all of these flags are available in
older versions of Pod::Html. See your Pod::Html documentation for more information.
The alternative, indicated with -npod, is not to use Pod::Html, but rather to format
pod text in italics (or whatever the stylesheet indicates), without special html
markup. This is useful, for example, if pod is being used as an alternative way to
write comments.
The -frm, or --frames flag
By default, a single html output file is produced. This can be changed with the -frm
option, which creates a frame holding a table of contents in the left panel and the
source code in the right side. This simplifies code browsing. Assume, for example,
that the input file is MyModule.pm. Then, for default file extension choices, these
three files will be created:
MyModule.pm.html - the frame
MyModule.pm.toc.html - the table of contents
MyModule.pm.src.html - the formatted source code
Obviously this file naming scheme requires that output be directed to a real file (as
opposed to, say, standard output). If this is not the case, or if the file extension
is unknown, the -frm option will be ignored.
The -text=s, or --html-toc-extension flag
Use this flag to specify the extra file extension of the table of contents file when
html frames are used. The default is "toc". See "Specifying File Extensions".
The -sext=s, or --html-src-extension flag
Use this flag to specify the extra file extension of the content file when html frames
are used. The default is "src". See "Specifying File Extensions".
The -hent, or --html-entities flag
This flag controls the use of Html::Entities for html formatting. By default, the
module Html::Entities is used to encode special symbols. This may not be the right
thing for some browser/language combinations. Use --nohtml-entities or -nhent to
prevent this.
Style Sheets
Style sheets make it very convenient to control and adjust the appearance of html
pages. The default behavior is to write a page of html with an embedded style sheet.
An alternative to an embedded style sheet is to create a page with a link to an
external style sheet. This is indicated with the -css=filename, where the external
style sheet is filename. The external style sheet filename will be created if and
only if it does not exist. This option is useful for controlling multiple pages from
a single style sheet.
To cause perltidy to write a style sheet to standard output and exit, use the -ss, or
--stylesheet, flag. This is useful if the style sheet could not be written for some
reason, such as if the -pre flag was used. Thus, for example,
perltidy -html -ss >mystyle.css
will write a style sheet with the default properties to file mystyle.css.
The use of style sheets is encouraged, but a web page without a style sheets can be
created with the flag -nss. Use this option if you must to be sure that older
browsers (roughly speaking, versions prior to 4.0 of Netscape Navigator and Internet
Explorer) can display the syntax-coloring of the html files.
Controlling HTML properties
Note: It is usually more convenient to accept the default properties and then edit the
stylesheet which is produced. However, this section shows how to control the
properties with flags to perltidy.
Syntax colors may be changed from their default values by flags of the either the long
form, -html-color-xxxxxx=n, or more conveniently the short form, -hcx=n, where xxxxxx
is one of the following words, and x is the corresponding abbreviation:
Token Type xxxxxx x
---------- -------- --
comment comment c
number numeric n
identifier identifier i
bareword, function bareword w
keyword keyword k
quite, pattern quote q
here doc text here-doc-text h
here doc target here-doc-target hh
punctuation punctuation pu
parentheses paren p
structural braces structure s
semicolon semicolon sc
colon colon co
comma comma cm
label label j
sub definition name subroutine m
pod text pod-text pd
A default set of colors has been defined, but they may be changed by providing values
to any of the following parameters, where n is either a 6 digit hex RGB color value or
an ascii name for a color, such as 'red'.
To illustrate, the following command will produce an html file somefile.pl.html with
"aqua" keywords:
perltidy -html -hck=00ffff somefile.pl
and this should be equivalent for most browsers:
perltidy -html -hck=aqua somefile.pl
Perltidy merely writes any non-hex names that it sees in the html file. The following
16 color names are defined in the HTML 3.2 standard:
black => 000000,
silver => c0c0c0,
gray => 808080,
white => ffffff,
maroon => 800000,
red => ff0000,
purple => 800080,
fuchsia => ff00ff,
green => 008000,
lime => 00ff00,
olive => 808000,
yellow => ffff00
navy => 000080,
blue => 0000ff,
teal => 008080,
aqua => 00ffff,
Many more names are supported in specific browsers, but it is safest to use the hex
codes for other colors. Helpful color tables can be located with an internet search
for "HTML color tables".
Besides color, two other character attributes may be set: bold, and italics. To set a
token type to use bold, use the flag --html-bold-xxxxxx or -hbx, where xxxxxx or x are
the long or short names from the above table. Conversely, to set a token type to NOT
use bold, use --nohtml-bold-xxxxxx or -nhbx.
Likewise, to set a token type to use an italic font, use the flag --html-italic-xxxxxx
or -hix, where again xxxxxx or x are the long or short names from the above table.
And to set a token type to NOT use italics, use --nohtml-italic-xxxxxx or -nhix.
For example, to use bold braces and lime color, non-bold, italics keywords the
following command would be used:
perltidy -html -hbs -hck=00FF00 -nhbk -hik somefile.pl
The background color can be specified with --html-color-background=n, or -hcbg=n for
short, where n is a 6 character hex RGB value. The default color of text is the value
given to punctuation, which is black as a default.
Here are some notes and hints:
1. If you find a preferred set of these parameters, you may want to create a
.perltidyrc file containing them. See the perltidy man page for an explanation.
2. Rather than specifying values for these parameters, it is probably easier to accept
the defaults and then edit a style sheet. The style sheet contains comments which
should make this easy.
3. The syntax-colored html files can be very large, so it may be best to split large
files into smaller pieces to improve download times.
SOME COMMON INPUT CONVENTIONS
Specifying Block Types
Several parameters which refer to code block types may be customized by also specifying an
associated list of block types. The type of a block is the name of the keyword which
introduces that block, such as if, else, or sub. An exception is a labeled block, which
has no keyword, and should be specified with just a colon. To specify all blocks use '*'.
For example, the following parameter specifies "sub", labels, "BEGIN", and "END" blocks:
-cscl="sub : BEGIN END"
(the meaning of the -cscl parameter is described above.) Note that quotes are required
around the list of block types because of the spaces. For another example, the following
list specifies all block types for vertical tightness:
-bbvtl='*'
Specifying File Extensions
Several parameters allow default file extensions to be overridden. For example, a backup
file extension may be specified with -bext=ext, where ext is some new extension. In order
to provides the user some flexibility, the following convention is used in all cases to
decide if a leading '.' should be used. If the extension "ext" begins with "A-Z", "a-z",
or "0-9", then it will be appended to the filename with an intermediate '.' (or perhaps an
'_' on VMS systems). Otherwise, it will be appended directly.
For example, suppose the file is somefile.pl. For "-bext=old", a '.' is added to give
somefile.pl.old. For "-bext=.old", no additional '.' is added, so again the backup file
is somefile.pl.old. For "-bext=~", then no dot is added, and the backup file will be
somefile.pl~ .
SWITCHES WHICH MAY BE NEGATED
The following list shows all short parameter names which allow a prefix 'n' to produce the
negated form:
D anl asc aws b bbb bbc bbs bl bli boc bok bol bot ce
csc dac dbc dcsc ddf dln dnl dop dp dpro dsc dsm dsn dtt dwls
dwrs dws f fll frm fs hsc html ibc icb icp iob isbc lal log
lp lsl ohbr okw ola oll opr opt osbr otr ple pod pvl q
sbc sbl schb scp scsb sct se sfp sfs skp sob sohb sop sosb sot
ssc st sts syn t tac tbc toc tp tqw tsc w x bar kis
Equivalently, the prefix 'no' or 'no-' on the corresponding long names may be used.
LIMITATIONS
Parsing Limitations
Perltidy should work properly on most perl scripts. It does a lot of self-checking,
but still, it is possible that an error could be introduced and go undetected.
Therefore, it is essential to make careful backups and to test reformatted scripts.
The main current limitation is that perltidy does not scan modules included with 'use'
statements. This makes it necessary to guess the context of any bare words introduced
by such modules. Perltidy has good guessing algorithms, but they are not infallible.
When it must guess, it leaves a message in the log file.
If you encounter a bug, please report it.
What perltidy does not parse and format
Perltidy indents but does not reformat comments and "qw" quotes. Perltidy does not in
any way modify the contents of here documents or quoted text, even if they contain
source code. (You could, however, reformat them separately). Perltidy does not
format 'format' sections in any way. And, of course, it does not modify pod
documents.
FILES
Temporary files
Under the -html option with the default --pod2html flag, a temporary file is required
to pass text to Pod::Html. Unix systems will try to use the POSIX tmpnam() function.
Otherwise the file perltidy.TMP will be temporarily created in the current working
directory.
Special files when standard input is used
When standard input is used, the log file, if saved, is perltidy.LOG, and any errors
are written to perltidy.ERR unless the -se flag is set. These are saved in the
current working directory.
Files overwritten
The following file extensions are used by perltidy, and files with these extensions
may be overwritten or deleted: .ERR, .LOG, .TEE, and/or .tdy, .html, and .bak,
depending on the run type and settings.
Files extensions limitations
Perltidy does not operate on files for which the run could produce a file with a
duplicated file extension. These extensions include .LOG, .ERR, .TEE, and perhaps
.tdy and .bak, depending on the run type. The purpose of this rule is to prevent
generating confusing filenames such as somefile.tdy.tdy.tdy.
SEE ALSO
perlstyle(1), Perl::Tidy(3)
VERSION
This man page documents perltidy version 20140328.
CREDITS
Michael Cartmell supplied code for adaptation to VMS and helped with v-strings.
Yves Orton supplied code for adaptation to the various versions of Windows.
Axel Rose supplied a patch for MacPerl.
Hugh S. Myers designed and implemented the initial Perl::Tidy module interface.
Many others have supplied key ideas, suggestions, and bug reports; see the CHANGES file.
AUTHOR
Steve Hancock
email: perltidy at users.sourceforge.net
http://perltidy.sourceforge.net
COPYRIGHT
Copyright (c) 2000-2012 by Steve Hancock
LICENSE
This package is free software; you can redistribute it and/or modify it under the terms of
the "GNU General Public License".
Please refer to the file "COPYING" for details.
DISCLAIMER
This package is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the "GNU General Public License" for more details.