Provided by: slic3r_1.2.9+dfsg-2build1_amd64 
NAME
slic3r - Slice 3D models into G-Code for 3D-printing
SYNOPSIS
slic3r [ OPTIONS ] [ file.stl ] [ file2.stl ] ...
DESCRIPTION
Slic3r is a STL-to-GCODE translator for RepRap 3D printers written by Alessandro
Ranellucci <aar@cpan.org> - http://slic3r.org/
OPTIONS
Common options:
--help Output usage screen and exit
--version
Output the version of Slic3r and exit
--save <file>
Save configuration to the specified file
--load <file>
Load configuration from the specified file. It can be used more than once to
load options from multiple files.
-o, --output <file>
File to output gcode to (by default, the file will be saved into the same
directory as the input file using the --output-filename-format to generate
the filename.) If a directory is specified for this option, the output will
be saved under that directory, and the filename will be generated by
--output-filename-format.
Non-slicing actions (no G-code will be generated):
--repair
Repair given STL files and save them as <name>_fixed.obj
--cut <z>
Cut given input files at given Z (relative) and export them as
<name>_upper.stl and <name>_lower.stl
--split
Split the shells contained in given STL file into several STL files
--info Output information about the supplied file(s) and exit
-j, --threads <num> Number of threads to use (1+, default: 2)
GUI options:
--no-plater
Disable the plater tab
--gui-mode
Overrides the configured mode (simple/expert)
--autosave <file>
Automatically export current configuration to the specified file
Output options:
--output-filename-format
Output file name format; all config options enclosed in brackets will be
replaced by their values, as well as [input_filename_base] and
[input_filename] (default: [input_filename_base].gcode)
--post-process
Generated G-code will be processed with the supplied script; call this more
than once to process through multiple scripts.
--export-svg
Export a SVG file containing slices instead of G-code.
-m, --merge
If multiple files are supplied, they will be composed into a single print
rather than processed individually.
Printer options:
--nozzle-diameter
Diameter of nozzle in mm (default: 0.5)
--print-center
Coordinates in mm of the point to center the print around (default: 100,100)
--z-offset
Additional height in mm to add to vertical coordinates (+/-, default: 0)
--gcode-flavor
The type of G-code to generate
(reprap/teacup/makerware/sailfish/mach3/no-extrusion, default: reprap)
--use-relative-e-distances Enable this to get relative E values (default: no)
--use-firmware-retraction
Enable firmware-controlled retraction using G10/G11 (default: no)
--use-volumetric-e
Express E in cubic millimeters and prepend M200 (default: no)
--gcode-arcs
Use G2/G3 commands for native arcs (experimental, not supported by all
firmwares)
--gcode-comments
Make G-code verbose by adding comments (default: no)
--vibration-limit
Limit the frequency of moves on X and Y axes (Hz, set zero to disable;
default: 0)
--pressure-advance
Adjust pressure using the experimental advance algorithm (K constant, set
zero to disable; default: 0)
Filament options:
--filament-diameter
Diameter in mm of your raw filament (default: 3)
--extrusion-multiplier
Change this to alter the amount of plastic extruded. There should be very
little need to change this value, which is only useful to compensate for
filament packing (default: 1)
--temperature
Extrusion temperature in degree Celsius, set 0 to disable (default: 200)
--first-layer-temperature Extrusion temperature for the first layer, in degree
Celsius,
set 0 to disable (default: same as --temperature)
--bed-temperature
Heated bed temperature in degree Celsius, set 0 to disable (default: 0)
--first-layer-bed-temperature Heated bed temperature for the first layer, in degree
Celsius,
set 0 to disable (default: same as --bed-temperature)
Speed options:
--travel-speed
Speed of non-print moves in mm/s (default: 130)
--perimeter-speed
Speed of print moves for perimeters in mm/s (default: 30)
--small-perimeter-speed
Speed of print moves for small perimeters in mm/s or % over perimeter speed
(default: 30)
--external-perimeter-speed
Speed of print moves for the external perimeter in mm/s or % over perimeter
speed (default: 70%)
--infill-speed
Speed of print moves in mm/s (default: 60)
--solid-infill-speed Speed of print moves for solid surfaces in mm/s or % over
infill speed
(default: 60)
--top-solid-infill-speed Speed of print moves for top surfaces in mm/s or % over
solid infill speed
(default: 50)
--support-material-speed
Speed of support material print moves in mm/s (default: 60)
--support-material-interface-speed
Speed of support material interface print moves in mm/s or % over support
material speed (default: 100%)
--bridge-speed
Speed of bridge print moves in mm/s (default: 60)
--gap-fill-speed
Speed of gap fill print moves in mm/s (default: 20)
--first-layer-speed Speed of print moves for bottom layer, expressed either as an
absolute
value or as a percentage over normal speeds (default: 30%)
Acceleration options:
--perimeter-acceleration
Overrides firmware's default acceleration for perimeters. (mm/s^2, set zero
to disable; default: 0)
--infill-acceleration
Overrides firmware's default acceleration for infill. (mm/s^2, set zero to
disable; default: 0)
--bridge-acceleration
Overrides firmware's default acceleration for bridges. (mm/s^2, set zero to
disable; default: 0)
--first-layer-acceleration
Overrides firmware's default acceleration for first layer. (mm/s^2, set zero
to disable; default: 0)
--default-acceleration
Acceleration will be reset to this value after the specific settings above
have been applied. (mm/s^2, set zero to disable; default: 130)
Accuracy options:
--layer-height
Layer height in mm (default: 0.4)
--first-layer-height Layer height for first layer (mm or %, default: 0.35)
--infill-every-layers
Infill every N layers (default: 1)
--solid-infill-every-layers
Force a solid layer every N layers (default: 0)
Print options:
--perimeters
Number of perimeters/horizontal skins (range: 0+, default: 3)
--top-solid-layers
Number of solid layers to do for top surfaces (range: 0+, default: 3)
--bottom-solid-layers
Number of solid layers to do for bottom surfaces (range: 0+, default: 3)
--solid-layers
Shortcut for setting the two options above at once
--fill-density
Infill density (range: 0%-100%, default: 40%)
--fill-angle
Infill angle in degrees (range: 0-90, default: 45)
--fill-pattern
Pattern to use to fill non-solid layers (default: honeycomb)
--external-fill-pattern Pattern to use to fill solid layers (default: rectilinear)
--start-gcode
Load initial G-code from the supplied file. This will overwrite the default
command (home all axes [G28]).
--end-gcode
Load final G-code from the supplied file. This will overwrite the default
commands (turn off temperature [M104 S0], home X axis [G28 X], disable
motors [M84]).
--layer-gcode
Load layer-change G-code from the supplied file (default: nothing).
--toolchange-gcode
Load tool-change G-code from the supplied file (default: nothing).
--seam-position
Position of loop starting points (random/nearest/aligned, default: aligned).
--external-perimeters-first Reverse perimeter order. (default: no)
--spiral-vase
Experimental option to raise Z gradually when printing single-walled vases
(default: no)
--only-retract-when-crossing-perimeters
Disable retraction when travelling between infill paths inside the same
island. (default: no)
--solid-infill-below-area
Force solid infill when a region has a smaller area than this threshold
(mm^2, default: 70)
--infill-only-where-needed
Only infill under ceilings (default: no)
--infill-first
Make infill before perimeters (default: no)
Quality options (slower slicing):
--extra-perimeters
Add more perimeters when needed (default: yes)
--avoid-crossing-perimeters Optimize travel moves so that no perimeters are crossed
(default: no)
--thin-walls
Detect single-width walls (default: yes)
--overhangs
Experimental option to use bridge flow, speed and fan for overhangs
(default: yes)
Support material options:
--support-material
Generate support material for overhangs
--support-material-threshold
Overhang threshold angle (range: 0-90, set 0 for automatic detection,
default: 0)
--support-material-pattern
Pattern to use for support material (default: pillars)
--support-material-spacing
Spacing between pattern lines (mm, default: 2.5)
--support-material-angle
Support material angle in degrees (range: 0-90, default: 0)
--support-material-interface-layers
Number of perpendicular layers between support material and object (0+,
default: 3)
--support-material-interface-spacing
Spacing between interface pattern lines (mm, set 0 to get a solid layer,
default: 0)
--raft-layers
Number of layers to raise the printed objects by (range: 0+, default: 0)
--support-material-enforce-layers
Enforce support material on the specified number of layers from bottom,
regardless of --support-material and threshold (0+, default: 0)
--dont-support-bridges
Experimental option for preventing support material from being generated
under bridged areas (default: yes)
Retraction options:
--retract-length
Length of retraction in mm when pausing extrusion (default: 1)
--retract-speed
Speed for retraction in mm/s (default: 30)
--retract-restart-extra
Additional amount of filament in mm to push after compensating retraction
(default: 0)
--retract-before-travel
Only retract before travel moves of this length in mm (default: 2)
--retract-lift
Lift Z by the given distance in mm when retracting (default: 0)
--retract-layer-change
Enforce a retraction before each Z move (default: yes)
--wipe Wipe the nozzle while doing a retraction (default: no)
Retraction options for multi-extruder setups:
--retract-length-toolchange
Length of retraction in mm when disabling tool (default: 1)
--retract-restart-extra-toolchnage
Additional amount of filament in mm to push after switching tool (default:
0)
Cooling options:
--cooling
Enable fan and cooling control
--min-fan-speed
Minimum fan speed (default: 35%)
--max-fan-speed
Maximum fan speed (default: 100%)
--bridge-fan-speed
Fan speed to use when bridging (default: 100%)
--fan-below-layer-time Enable fan if layer print time is below this approximate
number
of seconds (default: 60)
--slowdown-below-layer-time Slow down if layer print time is below this approximate
number
of seconds (default: 30)
--min-print-speed
Minimum print speed (mm/s, default: 10)
--disable-fan-first-layers Disable fan for the first N layers (default: 1)
--fan-always-on
Keep fan always on at min fan speed, even for layers that don't need cooling
Skirt options:
--skirts
Number of skirts to draw (0+, default: 1)
--skirt-distance
Distance in mm between innermost skirt and object (default: 6)
--skirt-height
Height of skirts to draw (expressed in layers, 0+, default: 1)
--min-skirt-length
Generate no less than the number of loops required to consume this length of
filament on the first layer, for each extruder (mm, 0+, default: 0)
--brim-width
Width of the brim that will get added to each object to help adhesion (mm,
default: 0)
Transform options:
--scale
Factor for scaling input object (default: 1)
--rotate
Rotation angle in degrees (0-360, default: 0)
--duplicate
Number of items with auto-arrange (1+, default: 1)
--duplicate-grid
Number of items with grid arrangement (default: 1,1)
--duplicate-distance
Distance in mm between copies (default: 0)
--xy-size-compensation
Grow/shrink objects by the configured absolute distance (mm, default: 0)
Sequential printing options:
--complete-objects
When printing multiple objects and/or copies, complete each one before
starting the next one; watch out for extruder collisions (default: no)
--extruder-clearance-radius Radius in mm above which extruder won't collide with
anything
(default: 20)
--extruder-clearance-height Maximum vertical extruder depth; i.e. vertical distance
from
extruder tip and carriage bottom (default: 20)
Miscellaneous options:
--notes
Notes to be added as comments to the output file
--resolution
Minimum detail resolution (mm, set zero for full resolution, default: 0)
Flow options (advanced):
--extrusion-width
Set extrusion width manually; it accepts either an absolute value in mm
(like 0.65) or a percentage over layer height (like 200%)
--first-layer-extrusion-width
Set a different extrusion width for first layer
--perimeter-extrusion-width
Set a different extrusion width for perimeters
--external-perimeter-extrusion-width
Set a different extrusion width for external perimeters
--infill-extrusion-width
Set a different extrusion width for infill
--solid-infill-extrusion-width
Set a different extrusion width for solid infill
--top-infill-extrusion-width
Set a different extrusion width for top infill
--support-material-extrusion-width
Set a different extrusion width for support material
--bridge-flow-ratio Multiplier for extrusion when bridging (> 0, default: 1)
Multiple extruder options:
--extruder-offset
Offset of each extruder, if firmware doesn't handle the displacement (can be
specified multiple times, default: 0x0)
--perimeter-extruder
Extruder to use for perimeters (1+, default: 1)
--infill-extruder
Extruder to use for infill (1+, default: 1)
--solid-infill-extruder
Extruder to use for infill (1+, default: 1)
--support-material-extruder
Extruder to use for support material (1+, default: 1)
--support-material-interface-extruder
Extruder to use for support material interface (1+, default: 1)
--ooze-prevention
Drop temperature and park extruders outside a full skirt for automatic
wiping (default: no)
--standby-temperature-delta
Temperature difference to be applied when an extruder is not active and
--ooze-prevention is enabled (default: -5)