Ubuntu Manpage: smtp-sink - parallelized SMTP/LMTP test server

Provided by: postfix_3.1.0-3ubuntu0.4_amd64

NAME

       smtp-sink - parallelized SMTP/LMTP test server

SYNOPSIS

       smtp-sink [options] [inet:][host]:port backlog

       smtp-sink [options] unix:pathname backlog

DESCRIPTION

smtp-sink listens on the named host (or address) and port. It takes SMTP messages from
the network and throws them away. The purpose is to measure client performance, not
protocol compliance.

smtp-sink may also be configured to capture each mail delivery transaction to file. Since
disk latencies are large compared to network delays, this mode of operation can reduce the
maximal performance by several orders of magnitude.

Connections can be accepted on IPv4 or IPv6 endpoints, or on UNIX-domain sockets. IPv4
and IPv6 are the default. This program is the complement of the smtp-source(1) program.

Note: this is an unsupported test program. No attempt is made to maintain compatibility
between successive versions.

Arguments:

-4 Support IPv4 only. This option has no effect when Postfix is built without IPv6
support.

-6 Support IPv6 only. This option is not available when Postfix is built without IPv6
support.

-8 Do not announce 8BITMIME support.

-a Do not announce SASL authentication support.

-A delay
Wait delay seconds after responding to DATA, then abort prematurely with a 550
reply status. Do not read further input from the client; this is an attempt to
block the client before it sends ".". Specify a zero delay value to abort
immediately.

-b soft-bounce-reply
Use soft-bounce-reply for soft reject responses. The default reply is "450 4.3.0
Error: command failed".

-B hard-bounce-reply
Use hard-bounce-reply for hard reject responses. The default reply is "500 5.3.0
Error: command failed".

-c Display running counters that are updated whenever an SMTP session ends, a QUIT
command is executed, or when "." is received.

-C Disable XCLIENT support.

-d dump-template
Dump each mail transaction to a single-message file whose name is created by
expanding the dump-template via strftime(3) and appending a pseudo-random
hexadecimal number (example: "%Y%m%d%H/%M." expands into "2006081203/05.809a62e3").
If the template contains "/" characters, missing directories are created
automatically. The message dump format is described below.

Note: this option keeps one capture file open for every mail transaction in
progress.

-D dump-template
Append mail transactions to a multi-message dump file whose name is created by
expanding the dump-template via strftime(3). If the template contains "/"
characters, missing directories are created automatically. The message dump format
is described below.

Note: this option keeps one capture file open for every mail transaction in
progress.

-e Do not announce ESMTP support.

-E Do not announce ENHANCEDSTATUSCODES support.

-f command,command,...
Reject the specified commands with a hard (5xx) error code. This option implies
-p.

Examples of commands are CONNECT, HELO, EHLO, LHLO, MAIL, RCPT, VRFY, DATA, .,
RSET, NOOP, and QUIT. Separate command names by white space or commas, and use
quotes to protect white space from the shell. Command names are case-insensitive.

-F Disable XFORWARD support.

-h hostname
Use hostname in the SMTP greeting, in the HELO response, and in the EHLO response.
The default hostname is "smtp-sink".

-H delay
Delay the first read operation after receiving DATA (time in seconds). Combine with
a large test message and a small TCP window size (see the -T option) to test the
Postfix client write_wait() implementation.

-L Enable LMTP instead of SMTP.

-m count (default: 256)
An upper bound on the maximal number of simultaneous connections that smtp-sink
will handle. This prevents the process from running out of file descriptors. Excess
connections will stay queued in the TCP/IP stack.

-M count
Terminate after receiving count messages.

-n count
Terminate after count sessions.

-N Do not announce support for DSN.

-p Do not announce support for ESMTP command pipelining.

-P Change the server greeting so that it appears to come through a CISCO PIX system.
Implies -e.

-q command,command,...
Disconnect (without replying) after receiving one of the specified commands.

-Q command,command,...
Send a 421 reply and disconnect after receiving one of the specified commands.

-r command,command,...
Reject the specified commands with a soft (4xx) error code. This option implies
-p.

-R root-directory
Change the process root directory to the specified location. This option requires
super-user privileges. See also the -u option.

-s command,command,...
Log the named commands to syslogd.

-S start-string
An optional string that is prepended to each message that is written to a dump file
(see the dump file format description below). The following C escape sequences are
supported: \a (bell), \b (backspace), \f (formfeed), \n (newline), \r (carriage
return), \t (horizontal tab), \v (vertical tab), \ddd (up to three octal digits)
and \\ (the backslash character).

-t timeout (default: 100)
Limit the time for receiving a command or sending a response. The time limit is
specified in seconds.

-T windowsize
Override the default TCP window size. To work around broken TCP window scaling
implementations, specify a value > 0 and < 65536.

-u username
Switch to the specified user privileges after opening the network socket and
optionally changing the process root directory. This option is required when the
process runs with super-user privileges. See also the -R option.

-v Show the SMTP conversations.

-w delay
Wait delay seconds before responding to a DATA command.

-W command:delay[:odds]
Wait delay seconds before responding to command. If odds is also specified (a
number between 1-99 inclusive), wait for a random multiple of delay. The random
multiplier is equal to the number of times the program needs to roll a dice with a
range of 0..99 inclusive, before the dice produces a result greater than or equal
to odds.

[inet:][host]:port
Listen on network interface host (default: any interface) TCP port port. Both host
and port may be specified in numeric or symbolic form.

unix:pathname
Listen on the UNIX-domain socket at pathname.

backlog
The maximum length the queue of pending connections, as defined by the listen(2)
system call.

DUMP FILE FORMAT

Each dumped message contains a sequence of text lines, terminated with the newline
character. The sequence of information is as follows:

• The optional string specified with the -S option.

• The smtp-sink generated headers as documented below.

• The message header and body as received from the SMTP client.

• An empty line.

The format of the smtp-sink generated headers is as follows:

X-Client-Addr: text
The client IP address without enclosing []. An IPv6 address is prefixed with
"ipv6:". This record is always present.

X-Client-Proto: text
The client protocol: SMTP, ESMTP or LMTP. This record is always present.

X-Helo-Args: text
The arguments of the last HELO or EHLO command before this mail delivery
transaction. This record is present only if the client sent a recognizable HELO or
EHLO command before the DATA command.

X-Mail-Args: text
The arguments of the MAIL command that started this mail delivery transaction. This
record is present exactly once.

X-Rcpt-Args: text
The arguments of an RCPT command within this mail delivery transaction. There is
one record for each RCPT command, and they are in the order as sent by the client.

Received: text
A message header for compatibility with mail processing software. This three-line
header marks the end of the headers provided by smtp-sink, and is formatted as
follows:

from helo ([addr])
The HELO or EHLO command argument and client IP address. If the client did
not send HELO or EHLO, the client IP address is used instead.

by host (smtp-sink) with proto id random;
The hostname specified with the -h option, the client protocol (see
X-Client-Proto above), and the pseudo-random portion of the per-message
capture file name.

time-stamp
A time stamp as defined in RFC 2822.

LICENSE

       The Secure Mailer license must be distributed with this software.

AUTHOR(S)