Provided by: snmp_5.7.3+dfsg-1ubuntu4.6_amd64 bug

NAME

       snmpvacm  -  creates  and  maintains SNMPv3 View-based Access Control entries on a network
       entity

SYNOPSIS

       snmpvacm [COMMON OPTIONS] AGENT createSec2Group MODEL SECURITYNAME  GROUPNAME
       snmpvacm [COMMON OPTIONS] AGENT deleteSec2Group MODEL SECURITYNAME
       snmpvacm [COMMON OPTIONS] AGENT createView [-Ce] NAME SUBTREE MASK
       snmpvacm [COMMON OPTIONS] AGENT deleteView NAME SUBTREE
       snmpvacm [COMMON  OPTIONS]   AGENT  createAccess  GROUPNAME  [CONTEXTPREFIX]  MODEL  LEVEL
       CONTEXTMATCH READVIEW WRITEVIEW NOTIFYVIEW
       snmpvacm [COMMON OPTIONS]  AGENT deleteAccess GROUPNAME [CONTEXTPREFIX] MODEL LEVEL
       snmpvacm [COMMON OPTIONS]  AGENT createAuth GROUPNAME [CONTEXTPREFIX] MODEL LEVEL AUTHTYPE
       CONTEXTMATCH VIEW
       snmpvacm [COMMON OPTIONS]  AGENT deleteAuth GROUPNAME [CONTEXTPREFIX] MODEL LEVEL AUTHTYPE

DESCRIPTION

       snmpvacm is an SNMP application that can be used to do simple  maintenance  on  the  View-
       based  Control Module (VACM) tables of an SNMP agent.  The SNMPv3 VACM specifications (see
       RFC2575) define assorted tables to specify groups of  users,  MIB  views,  and  authorised
       access  settings.   These  snmpvacm  commands  effectively  create  or  delete rows in the
       appropriate one of these tables, and match the equivalent configure directives  which  are
       documented in the snmpd.conf(5) man page.

       A fuller explanation of how these operate can be found in the project FAQ.

SUB-COMMANDS

   createSec2Group MODEL SECURITYNAME GROUPNAME
       Create  an  entry  in the SNMPv3 security name to group table.  This table allows a single
       access control entry to be applied to a number of users (or 'principals'), and is  indexed
       by the security model and security name values.

       MODEL

              An integer representing the security model, taking one of the following values:
              1 - reserved for SNMPv1
              2 - reserved for SNMPv2c
              3 - User-based Security Model (USM)

       SECURITYNAME

              A string representing the security name for a principal (represented in a security-
              model-independent format).  For USM-based requests, the security name is  the  same
              as the username.

       GROUPNAME

              A  string  identifying  the  group  that this entry (i.e. security name/model pair)
              should belong to.  This group name will then be referenced in the access table (see
              createAccess below).

   deleteSec2Group MODEL SECURITYNAME
       Delete an entry from the SNMPv3 security name to group table, thus removing access control
       settings for the given principal.  The entry to be removed is indexed  by  the  MODEL  and
       SECURITYNAME  values,  which  should match those used in the corresponding createSec2Group
       command (or equivalent).

   createView [-Ce] NAME SUBTREE MASK
       Create an entry in the SNMPv3 MIB view table.  A MIB view consists of  a  family  of  view
       subtrees  which  may be individually included in or (occasionally) excluded from the view.
       Each view subtree is defined by a combination of an OID subtree together with a bit string
       mask.  The view table is indexed by the view name and subtree OID values.

       [-Ce]

              An  optional  flag  to  indicate that this view subtree should be excluded from the
              named view.  If not specified, the default is to include the subtree in  the  view.
              When  constructing  a  view  from  a mixture of included and excluded subtrees, the
              excluded subtrees should be defined first -  particularly  if  the  named  view  is
              already referenced in one or more access entries.

       NAME

              A  string  identifying  a particular MIB view, of which this OID subtree/mask forms
              part (possibly the only part).

       SUBTREE

              The OID defining the root of the subtree to add to  (or  exclude  from)  the  named
              view.

       MASK

              A bit mask indicating which sub-identifiers of the associated subtree OID should be
              regarded as significant.

   deleteView NAME SUBTREE
       Delete an entry from the SNMPv3 view table, thus removing the subtree from the  given  MIB
       view.   Removing the final (or only) subtree will result in the deletion of the view.  The
       entry to be removed is indexed by the NAME and SUBTREE values, which  should  match  those
       used in the corresponding createView command (or equivalent).

       When  removing  subtrees  from  a  mixed  view (i.e. containing both included and excluded
       subtrees), the included subtrees should be removed first.

   createAccess GROUPNAME [CONTEXTPREFIX] MODEL LEVEL CONTEXTMATCH READVIEW WRITEVIEW NOTIFYVIEW
       Create an entry in the SNMPv3 access table, thus allowing a certain  level  of  access  to
       particular  MIB  views  for the principals in the specified group (given suitable security
       model and levels in the request).  The access table is indexed by the group name,  context
       prefix, security model and security level values.

       GROUPNAME

              The  name  of  the  group  that  this  access  entry  applies  to  (as  set up by a
              createSec2Group command, or equivalent)

       CONTEXTPREFIX

              A string representing a context name (or collection of context  names)  which  this
              access entry applies to.  The interpretation of this string depends on the value of
              the CONTEXTMATCH field (see below).

              If omitted, this will default to the null context "".

       MODEL

              An integer representing the security model, taking one of the following values:
              1 - reserved for SNMPv1
              2 - reserved for SNMPv2c
              3 - User-based Security Model (USM)

       LEVEL

              An integer representing the minimal security level, taking  one  of  the  following
              values:
              1 - noAuthNoPriv
              2 - authNoPriv
              3 - authPriv

              This  access  entry  will  be  applied  to  requests of this level or higher (where
              authPriv is higher than authNoPriv which is in turn higher than noAuthNoPriv).

       CONTEXTMATCH

              Indicates how to interpret the CONTEXTPREFIX value.  If this field  has  the  value
              '1'  (representing  'exact')  then  the  context  name  of a request must match the
              CONTEXTPREFIX value exactly for this access entry to be applicable to that request.

              If this field has the value '2' (representing 'prefix') then the initial  substring
              of the context name of a request must match the CONTEXTPREFIX value for this access
              entry  to  be  applicable  to  that  request.   This  provides  a  simple  form  of
              wildcarding.

       READVIEW

              The  name  of the MIB view (as set up by createView or equivalent) defining the MIB
              objects for which this request may request the current values.

              If there is no view with this name, then read access is not granted.

       WRITEVIEW

              The name of the MIB view (as set up by createView or equivalent) defining  the  MIB
              objects for which this request may potentially SET new values.

              If there is no view with this name, then read access is not granted.

       NOTIFYVIEW

              The  name  of the MIB view (as set up by createView or equivalent) defining the MIB
              objects which may be included in notification request.

              Note that this aspect of access control is not currently supported.

   deleteAccess GROUPNAME [CONTEXTPREFIX] MODEL LEVEL
       Delete an entry from the SNMPv3 access table, thus removing the specified  access  control
       settings.   The entry to be removed is indexed by the group name, context prefix, security
       model and security level values, which  should  match  those  used  in  the  corresponding
       createAccess command (or equivalent).

   createAuth GROUPNAME [CONTEXTPREFIX] MODEL LEVEL AUTHTYPE CONTEXTMATCH VIEW
       Create  an  entry  in the Net-SNMP extension to the standard access table, thus allowing a
       certain type of access to the MIB view for the principals in  the  specified  group.   The
       interpretation  of GROUPNAME, CONTEXTPREFIX, MODEL, LEVEL and CONTEXTMATCH are the same as
       for the createAccess directive.  The extension access table is indexed by the group  name,
       context prefix, security model, security level and authtype values.

       AUTHTYPE

              The  style  of  access that this entry should be applied to.  See snmpd.conf(5) and
              snmptrapd.conf(5) for details of valid tokens.

       VIEW

              The name of the MIB view (as set up by createView or equivalent) defining  the  MIB
              objects for which this style of access is authorized.

   deleteAuth GROUPNAME [CONTEXTPREFIX] MODEL LEVEL AUTHTYPE
       Delete  an  entry  from  the  extension  access  table, thus removing the specified access
       control settings.  The entry to be removed is indexed by the group name,  context  prefix,
       security  model,  security level and authtype values, which should match those used in the
       corresponding createAuth command (or equivalent).

       Note that snmpget REQUIRES  an argument specifying the agent to query as described in  the
       .I snmpcmd(1) manual page.

EXAMPLES

       Given  a  pre-existing  user dave (which could be set up using the snmpusm(1) command), we
       could configure full read-write access to the whole OID tree using the commands:

              snmpvacm localhost createSec2Group 3 dave RWGroup

              snmpvacm localhost createView   all .1 80

              snmpvacm localhost createAccess  RWGroup 3 1 1 all all none

       This creates a new security group named "RWGroup" containing the SNMPv3 user "dave", a new
       view  "all" containing the full OID tree based on .iso(1) , and then allows those users in
       the group "RWGroup" (i.e. "dave") both read- and write-access to the view "all" (i.e.  the
       full OID tree) when using authenticated SNMPv3 requests.

       As  a  second example, we could set up read-only access to a portion of the OID tree using
       the commands:

              snmpvacm localhost createSec2Group 3 wes ROGroup

              snmpvacm localhost createView   sysView  system fe

              snmpvacm localhost createAccess  ROGroup 3 0 1 sysView none none

       This creates a new security group  named  "ROGroup"  containing  the  (pre-existing)  user
       "wes",    a    new    view   "sysView"   containing   just   the   OID   tree   based   on
       .iso(1).org(3).dod(6).inet(1).mgmt(2).mib-2(1).system(1) , and then allows those users  in
       the  group  "ROGroup" (i.e. "wes") read-access, but not write-access to the view "sysView"
       (i.e. the system group).

EXIT STATUS

       The following exit values are returned:

       0 - Successful completion

       1 - A usage syntax error (which displays a suitable usage message) or a request timeout.

       2 - An error occurred while executing the command (which also displays  a  suitable  error
       message).

LIMITATIONS

       This  utility  does  not support the configuration of new community strings, so is only of
       use for setting up new access control for SNMPv3 requests.  It can be used  to  amend  the
       access settings for existing community strings, but not to set up new ones.

       The  use  of  numeric  parameters  for  secLevel  and contextMatch parameters is less than
       intuitive.  These commands do not provide the full flexibility of  the  equivalent  config
       file directives.

       There is (currently) no equivalent to the one-shot configure directives rouser and rwuser.

SEE ALSO

       snmpcmd(1), snmpusm(1), snmpd.conf(5), snmp.conf(5), RFC 2575, Net-SNMP project FAQ