Provided by: spamassassin_3.4.2-0ubuntu0.16.04.5_all bug

NAME

       spamassassin - simple front-end filtering script for SpamAssassin

SYNOPSIS

       spamassassin [options] [ < mailmessage | path ... ]

       spamassassin -d [ < mailmessage | path ... ]

       spamassassin -r [ < mailmessage | path ... ]

       spamassassin -k [ < mailmessage | path ... ]

       spamassassin -W|-R [ < mailmessage | path ... ]

       Options:

        -L, --local                       Local tests only (no online tests)
        -r, --report                      Report message as spam
        -k, --revoke                      Revoke message as spam
        -d, --remove-markup               Remove spam reports from a message
        -C path, --configpath=path, --config-file=path
                                          Path to standard configuration dir
        -p prefs, --prefspath=file, --prefs-file=file
                                          Set user preferences file
        --siteconfigpath=path             Path for site configs
                                          (def: /etc/spamassassin)
        --cf='config line'                Additional line of configuration
        -x, --nocreate-prefs              Don't create user preferences file
        -e, --exit-code                   Exit with a non-zero exit code if the
                                          tested message was spam
        --mbox                            read in messages in mbox format
        --mbx                             read in messages in UW mbx format
        -t, --test-mode                   Pipe message through and add extra
                                          report to the bottom
        --lint                            Lint the rule set: report syntax errors
        -W, --add-to-whitelist            Add addresses in mail to persistent address whitelist
        --add-to-blacklist                Add addresses in mail to persistent address blacklist
        -R, --remove-from-whitelist       Remove all addresses found in mail from
                                          persistent address list
        --add-addr-to-whitelist=addr      Add addr to persistent address whitelist
        --add-addr-to-blacklist=addr      Add addr to persistent address blacklist
        --remove-addr-from-whitelist=addr Remove addr from persistent address list
        -4 --ipv4only, --ipv4-only, --ipv4 Use IPv4, disable use of IPv6 for DNS etc.
        -6                                Use IPv6, disable use of IPv4 where possible
        --progress                        Print progress bar
        -D, --debug [area=n,...]          Print debugging messages
        -V, --version                     Print version
        -h, --help                        Print usage message

DESCRIPTION

       spamassassin is a simple front-end filter for SpamAssassin.

       Using the SpamAssassin rule base, it uses a wide range of heuristic tests on mail headers
       and body text to identify "spam", also known as unsolicited bulk email.  Once identified,
       the mail is then tagged as spam for later filtering using the user's own mail user-agent
       application.

       The default tagging operations that take place are detailed in "TAGGING" in spamassassin.

       By default, message(s) are read in from STDIN (< mailmessage), or from specified files and
       directories (path ...)  STDIN and files are assumed to be in file format, with a single
       message per file.  Directories are assumed to be in a format where each file in the
       directory contains only one message (directories are not recursed and filenames containing
       whitespace or beginning with "." or "," are skipped).  The options --mbox and --mbx can
       override the assumed format, see the appropriate OPTION information below.

       Please note that SpamAssassin is not designed to scan large messages. Don't feed messages
       larger than about 500 KB to SpamAssassin, as this will consume a huge amount of memory.

OPTIONS

       -e, --error-code, --exit-code
           Exit with a non-zero error code, if the message is determined to be spam.

       -h, --help
           Print help message and exit.

       -V, --version
           Print version and exit.

       -t, --test-mode
           Test mode.  Pipe message through and add extra report.  Note that the report text
           assumes that the message is spam, since in normal use it is only visible in this case.
           Pay attention to the score instead.

           If you run this with -d, the message will first have SpamAssassin markup removed
           before being tested.

       -r, --report
           Report this message as manually-verified spam.  This will submit the mail message read
           from STDIN to various spam-blocker databases.  Currently, these are the Distributed
           Checksum Clearinghouse "http://www.dcc-servers.net/dcc/", Pyzor "http://pyzor.org/",
           Vipul's Razor "http://razor.sourceforge.net/", and SpamCop "http://www.spamcop.net/".

           If the message contains SpamAssassin markup, the markup will be stripped out
           automatically before submission.  The support modules for DCC, Pyzor, and Razor must
           be installed for spam to be reported to each service.  SpamCop reports will have
           greater effect if you register and set the "spamcop_to_address" option.

           The message will also be submitted to SpamAssassin's learning systems; currently this
           is the internal Bayesian statistical-filtering system (the BAYES rules).  (Note that
           if you only want to perform statistical learning, and do not want to report mail to
           third-parties, you should use the "sa-learn" command directly instead.)

       -k, --revoke
           Revoke this message.  This will revoke the mail message read from STDIN from various
           spam-blocker databases.  Currently, these are Vipul's Razor.

           Revocation support for the Distributed Checksum Clearinghouse, Pyzor, and SpamCop is
           not currently available.

           If the message contains SpamAssassin markup, the markup will be stripped out
           automatically before submission.  The support modules for Razor must be installed for
           spam to be revoked from the service.

           The message will also be submitted as 'ham' (non-spam) to SpamAssassin's learning
           systems; currently this is the internal Bayesian statistical-filtering system (the
           BAYES rules).  (Note that if you only want to perform statistical learning, and do not
           want to report mail to third-parties, you should use the "sa-learn" command directly
           instead.)

       --lint
           Syntax check (lint) the rule set and configuration files, reporting typos and rules
           that do not compile correctly.  Exits with 0 if there are no errors, or greater than 0
           if any errors are found.

       -W, --add-to-whitelist
           Add all email addresses, in the headers and body of the mail message read from STDIN,
           to a persistent address whitelist.  Note that you must be running "spamassassin" or
           "spamd" with a persistent address list plugin enabled for this to work.

       --add-to-blacklist
           Add all email addresses, in the headers and body of the mail message read from STDIN,
           to the persistent address blacklist.  Note that you must be running "spamassassin" or
           "spamd" with a persistent address list plugin enabled for this to work.

       -R, --remove-from-whitelist
           Remove all email addresses, in the headers and body of the mail message read from
           STDIN, from a persistent address list. STDIN must contain a full email message, so to
           remove a single address you should use --remove-addr-from-whitelist instead.

           Note that you must be running "spamassassin" or "spamd" with a persistent address list
           plugin enabled for this to work.

       --add-addr-to-whitelist
           Add the named email address to a persistent address whitelist.  Note that you must be
           running "spamassassin" or "spamd" with a persistent address list plugin enabled for
           this to work.

       --add-addr-to-blacklist
           Add the named email address to a persistent address blacklist.  Note that you must be
           running "spamassassin" or "spamd" with a persistent address list plugin enabled for
           this to work.

       --remove-addr-from-whitelist
           Remove the named email address from a persistent address whitelist.  Note that you
           must be running "spamassassin" or "spamd" with a persistent address list plugin
           enabled for this to work.

        --ipv4only, --ipv4-only, --ipv4
           Do not use IPv6 for DNS tests. Normally, SpamAssassin will try to detect if IPv6 is
           available, using only IPv4 if it is not. Use if the existing tests for IPv6
           availability produce incorrect results or crashes.

       -L, --local
           Do only the ''local'' tests, ones that do not require an internet connection to
           operate.  Normally, SpamAssassin will try to detect whether you are connected to the
           net before doing these tests anyway, but for faster checks you may wish to use this.

           Note that SpamAssassin's network rules are run in parallel.  This can cause overhead
           in terms of the number of file descriptors required if --local is not used; it is
           recommended that the minimum limit on fds be raised to at least 256 for safety.

       -d, --remove-markup
           Remove SpamAssassin markup (the "SpamAssassin results" report, X-Spam-Status headers,
           etc.) from the mail message.  The resulting message, which will be more or less
           identical to the original, pre-SpamAssassin input, will be output to STDOUT.

           (Note: the message will not be exactly identical; some headers will be reformatted due
           to some features of the Mail::Internet package, but the body text will be.)

       -C path, --configpath=path, --config-file=path
           Use the specified path for locating the distributed configuration files.  Ignore the
           default directories (usually "/usr/share/spamassassin" or similar).

       --siteconfigpath=path
           Use the specified path for locating site-specific configuration files.  Ignore the
           default directories (usually "/etc/spamassassin" or similar).

       --cf='config line'
           Add additional lines of configuration directly from the command-line, parsed after the
           configuration files are read.   Multiple --cf arguments can be used, and each will be
           considered a separate line of configuration.  For example:

                   spamassassin -t --cf="body NEWRULE /text/" --cf="score NEWRULE 3.0"

       -p prefs, --prefspath=prefs, --prefs-file=prefs
           Read user score preferences from prefs (usually "$HOME/.spamassassin/user_prefs").

       --progress
           Prints a progress bar (to STDERR) showing the current progress.  This option will only
           be useful if you are redirecting STDOUT (and not STDERR).  In the case where no valid
           terminal is found this option will behave very much like the --showdots option in
           other SpamAssassin programs.

       -D [area,...], --debug [area,...]
           Produce debugging output. If no areas are listed, all debugging information is
           printed. Diagnostic output can also be enabled for each area individually; area is the
           area of the code to instrument. For example, to produce diagnostic output on bayes,
           learn, and dns, use:

                   spamassassin -D bayes,learn,dns

           Higher priority informational messages that are suitable for logging in normal
           circumstances are available with an area of "info".

           For more information about which areas (also known as channels) are available, please
           see the documentation at:

                   L<http://wiki.apache.org/spamassassin/DebugChannels>

       -x, --nocreate-prefs
           Disable creation of user preferences file.

       --mbox
           Specify that the input message(s) are in mbox format.  mbox is a standard Unix message
           folder format.

       --mbx
           Specify that the input message(s) are in UW .mbx format.  mbx is the mailbox format
           used within the University of Washington's IMAP implementation; see
           "http://www.washington.edu/imap/".

SEE ALSO

       sa-learn(1) spamd(1) spamc(1) Mail::SpamAssassin::Conf(3) Mail::SpamAssassin(3)

PREREQUISITES

       "Mail::SpamAssassin"

BUGS

       See <http://issues.apache.org/SpamAssassin/>

AUTHORS

       The SpamAssassin(tm) Project <http://spamassassin.apache.org/>

COPYRIGHT

       SpamAssassin is distributed under the Apache License, Version 2.0, as described in the
       file "LICENSE" included with the distribution.